Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.8 L
Closing Date
16 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Definition of similar work: "Satisfactory execution of any electrical work related to HT/LT installation".
45 conditions · 10 needing a document upload
Please furnish documents in support of your claim to fulfil the eligibility criteria as mentioned in tender documents. Each page of copy of documents/ certificates in support of credential, submitted by you shall be self attested/digitally signed by the you or authorized representative of your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating the offer or otherwise available in the offer.
No deviation shall be accepted, in case of deviation in any term and condition in tender documents offer will summarily be rejected.
Requisite documents proving technical eligibility criteria and technical eligibility criteria have been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works matter).
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works matter), otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firm, if applicable in the instant tender, should submit all valid requisite documents and full fill the stipulations as per clause 18 of IRGCC-2022 (works matter), otherwise their offer will be considered incomplete and shall not be considered.
Please submit your Bank details of the firm /individual/JV/partnership etc. i.e. Name of the Bank along with Bank Branch code, account No., IFSC Code, PAN Number and other necessary & relevant documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto two years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
GCC 2022 for works Contract
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to Sr.DEE/G/PRYJ, DRM office Nawab Yusuf Road, Prayagraj- 211001. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Balance sheet for the 4th previous year (i.e., FY 2022-23 or as applicable for the instance tender) as per para 10.2 of GCC-2022 and para 13 of Special condition of contract of tender document shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annex-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year (i.e., FY 2025-26 or as applicable for the instance tender) has not been audited/yet to be prepared.
Electrical work in connection with "Extension of NCC CNB sick line shed by 30m towards DLI end alongwith one examination pit of one Vande Bharat coach length".Electrical work in connection with "Upgradation of Lighting arrangements and provision of Pathway at GMC Yard Kanpur."
ELG-54-2627~NCR
ELG-54-2627
Open
Works - General
12 Months
Prayagraj, Uttar Pradesh
₹0
₹1.8 L
25 Sept 2026
25 Sept 2026
2 Oct 2026
22 items across 1 schedule · ₹88,23,792.35 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply, replacement, fixing, testing, connectingandcommissioning of 30 Watt or above LED floodlight fittingsas per IS:10322. LED Luminaries:-(1) A complete LEDlighting unit consisting of alight source and drivertogether with parts of distribute lights, to position and protect the lightsource, and to connect the light sourceto abranch circuit. The light source itself may be anLEDarray and LED module, or an LED lamp.(2):-SuppliedLED luminaries shall confirm toIS:16101(2012) IS:16106(2012).LightSource(LED) in the Luminaries shouldbe ofmake:- (1):-NICHIA/ CREE/OSRAM/SEOUL/PHILIPS/LUMILEDS /LEDNIUM. (2):- LEDstoIS:16105(2012).IS:16108(2012),IEC:62471.TypeLED:-High power LED,SMD(Surface Mountingdevice)/COB(Clipon board).1.Input operatingvoltage :-105-295 V AC.2:-Normal Voltage-220VAC,3.Driver type: constant currentdriver withshort circuit protection. 4.LED life:- >50000burning hours.5.Depreciation:- 30% max.after50000 burning hours.6.Control of distribution:-Fullcut off. 7.Surge protection:4KV.8. Drivecomponent:Industrial grade only.9. Efficiency ofdriver electronic: >85%.10. Beam angle:>=140degree along with road and>=80 degree acrossthe road.11.Colourtemperature:5000-6500K.12.Colour renderingindex(CRI):>=75.13.Ingress protection: IP-66.14.Lumen output:>120 lumens/watt. 15.Power factor:->0.95.16.Total harmonics distortion(THD):-<15%.17.Lamp cover :Toughened glass or UVstablisedpoly carbonate.18.Finishing:Powercoated/Anodized.19.Secondry optics: polycarbonate reflector/poly carbonateslens.20.Construction of housing:extrudedaluminum/CRCA/Pressure diecastaluminum.21.Mounting:Suitable forexistingpole/Truss/Lantern mounted.22.Certificate:Firmtosubmit LM80(In respect of LED used)&LM79(In respect ofluminare used) test certificatefrom National/Internationalaccredited Laboratoryand OEM certificate for complianceof BIS/IEC. 23.Warranty:Firm to submit warrantycertificate for five year along with the supply. All fittings shall be fitted with new suitable end/elbow with suitable size & length of MS Chanel with cage and connection with twistedtw in flexible cord of minimum size 16/1 mm copperconductor as per relevant technical specification.Materials parameters must remain unchanged during entire warranty period. (for Cat Walk Lights).Inspection by-RITES. | Numbers | 402.00 | 1,877.46 | 7,54,738.92 |
| 2 | Supply and erection of 6 Mtr. Galvanized (as per BSEN ISO1461) octagonal pole with baseplate220x220x12mm, top70mm and bottom 130mmof3mm thick sheet suitable for maximum windspeed upto 160Km/Hr. including foundation boltsand foundation with M 20 grade RCC and FE 415grade re inforcement (450x450x800mm deep )(foundation should be as per design approved by pole manufacturer) GI base plate G.I. anchor plateetc.as required including supplying and fixing ofdouble arm hot dipped galvanized bracket suitablefor street light fittings and supplying and drawingof 3x2.5Sq.mmFRLS copper conductor single corecable from junction box with two Nos 6/10AMP MCBto luminaire complete including termination withcopper lugs as required. Inspection by-Consignee. | Numbers | 20.00 | 6,684.75 | 1,33,695 |
| 3 | Supply, replacement, fixing,testing, connectingandcommissioning of 72 Watt orabove LED streetlights fittingsas per IS:10322. LEDLuminaries:- (1)A complete LEDlighting unit consisting of alightsource and driver together withparts ofdistribute lights,toposition and protect thelightsource,and to connect the lightsource to abranch circuit. Thelight source itself may be anLEDarray and LED module, or an LEDlamp.(2):- Supplied LEDluminaries shall confirm toIS:16101(2012) IS:16106(2012). LightSource(LED) in theLuminariesshould be of make:- (1):- NICHIA/CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS/LEDNIUM.(2):-LEDs to IS:16105(2012).IS:16108(2012), IEC:62471.Type LED:- HighpowerLED,SMD(Surface Mountingdevice)/COB(Clipon board).1.Input operating voltage :-105-295 VAC.2:- Normal Voltage-220V AC,3.Driver type:constantcurrent driver with short circuitprotection.4.LED life:- >50000burning hours.5.Depreciation:-30% max.after 50000burninghours.6.Control of distribution:-Full cut off.7.Surgeprotection:4KV. 8.Drivecomponent:Industrial gradeonly.9.Efficiency ofdriverelectronic: > 85%.10.Beamangle:>=140degree along withroad and >=80 degree acrosstheroad.11.Colourtemperature:5000- 6500K.12.Colourrenderingindex(CRI):>=75. 13.Ingressprotection:IP- 66.14.Lumenoutput:>120lumens/watt.15.Power factor:->0.95. 16.Totalharmonicsdistortion(THD):-<15%.17.Lampcover:Toughened glass or UVstabilised polycarbonate.18.Finishing:Powercoated/Anodized.19.Secondryoptics:poly carbonate reflector/polycarbonates lens.20.Construction ofhousing:extruded aluminum/CRCA/Pressure diecastaluminum. 21.Mounting:Suitable for existingpole/Truss/ Lantern mounted.22.Certificate:Firm tosubmit LM80(In respect of LED used) &LM79 (Inrespect of luminareused) test certificatefromNational/ Internationalaccredited Laboratoryand OEMcertificate for compliance ofBIS/IEC.23.Warranty:Firm tosubmit warranty certificateforfive year along with the supply.All fittings shallbe fitted withnew suitable bend/elbow withclampand proper nut and boltand connection with twistedtwinflexible cord of minimum size16/1 mm copperconductor asper relevant technicalspecification.Material paraMtrs.s must remain unchangedduringentire warrantyperiod. Inspection by-Consignee. | Numbers | 60.00 | 1,912.68 | 1,14,760.8 |
| 4 | Supply, fixing, testing, connecting andcommissioning of 120 Watt or above Highbay LEDlight fittings. LED Luminaries:-(1) A completeLED lighting unit consisting of a light source anddriver together with parts of distribute lights,toposition and protect the light source,and toconnect the light source to a branch circuit.Thelight source itself may be an LED array and LEDmodule, or an LED lamp.(2):-Supplied LEDluminaries shall confirm to IS:16101(2012) IS:16106(2012). Light Source(LED) in theLuminaries should be of make:- (1):-NICHIA/CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS/LEDNIUM. (2):-LEDs toIS:16105(2012).IS:16108(2012),IEC:62471.TypeLED:- High power LED,SMD(Surface Mountingdevice)/COB(Clip on board).1.Input operatingvoltage :-105-295 V AC.2:- Normal Voltage-220VAC, 3.Driver type: constant current driver withshort circuit protection. 4.LED life:- >50000burning hours.5.Depreciation:- 30% max.after50000 burning hours. 6.Control of distribution:-Full cut off. 7.Surge protection:4KV.8.Drivecomponent :Industrial grade only. 9.Efficiency ofdriver electronic: > 85%. 10.Beam angle:>=140degree along with road and >=80 degree acrossthe road. 11.Colour temperature:5000- 6500K.12.Colour rendering index(CRI):>=75.13.Ingressprotection :IP- 66.14.Lumen output: >120lumens/watt.15.Power factor:->0.95. 16.Totalhormonics distrotion(THD):-<15%. 17.Lampcover:Toughened glass or UV stabilsed polycarbonate.18.Finishing:Powercoated/Anodized.19.Secondry optics:polycorbonate reflector/ poly carbonateslens.20.Construction of housing: extrudedaluminum/CRCA/Pressure die castaluminum.21.Mounting:Suitable for existingpole/Truss/Lantern mounted.22.Certificate:Firmto submit LM80(In respect of LED used)&LM79(In respect of luminare used) test certificatefrom National/International accredited Laboratoryand OEM certificate for compliance ofBIS/IEC.23.Warranty:Firm to submit warrantycertificate for five year along with the supply.Allfittings shall be fitted with new suitablebend/elbow with clamp and proper nut and boltand connection with twisted twin flexible cord ofminimum size 16/1 mm copper conductor as perrelevant technical specification. Materialsprameters must remain unchanged during entirewarranty period. Inspection by-RITES. | Numbers | 80.00 | 6,712.51 | 5,37,000.8 |
| 5 | Supply, erection, testing, connecting&commissioning of 20 meter high mastsystemcomplete with all accessories 16 nos.luminaries of200W LED each Light, includingmaking offoundation as per recommendation ofmanufacturesalong with required materials formaking offoundation and with feeder pillarincluding allaccessories. 20 M high mast with itsaccessoriesMast shaft shall be hot dip galvanized(Singledip)comprising of polygonal pole and weldedbaseplate hot dip galvanized head frame withclamps,nuts & bolts for fixing sixteen luminariesand CGbox etc.(01 Job) A rising & loweringmechanismwith winch Lenten carriage head frame,SS wire,Rope cable &power tools with 1.5 HPmotor. (1Job). Supply,erection, testing, connectingandcommissioning of16 nos. luminaries of 200WLEDincluding allaccessories. (01Job). Supply ofM30foundation bolts of size-850mm manufacturedfromspecial steel C/W nuts, washers anchor plates&template for above mast includingearthingarrangement with electrode of 40 mm dia"B" classGI pipe of 3.0 mtrslong as per Drg. No.SrDEE/G/ALD 10/94. (01 Job).Constructionofsuitable shallow foundation with M20gradeconcrete for 20M high mast considering theSBC as10/T sqmtr at 2 mtr depth with all materials&labour (01 Job). Supply of twindomeaviationobservation light with 2 Nos LED arraylamp. (01set) Supply & installation of separatecontrol panelin front of feeder pillar housingsuitablecontrolcircuit with timer & AVR for theoperation ofthemast. It shall also consist of suitable control forthe power tool motors with suitablefoundation.Inspection by- Consignee. | Numbers | 1.00 | 3,70,819.8 | 3,70,819.8 |
| 6 | Supply erection, testing &commissioning of basic Earthing Kit1set as per RDSO spec. NoRDSO/PE/SPEC/PS/0109(REV.0)-2008,Amendment '1' or latestspecification. Inspection by-RITES. | Numbers | 97.00 | 13,868.19 | 13,45,214.43 |
| 7 | Collecting, Transporting from SSE/PS/store to site, laying, testing, andcommissioning of above LT cable . Layingdirect in ground (Including excavation,sand cushioning, protection brick coveringand refilling the trench etc.), direct inRCC/Metal pipes in rod/track crossings andon surface/required in wall/in concretefloor by cutting recessed and finishedoriginally as required as per relevanttechnical specifications. | Metre | 7000.00 | 69.98 | 4,89,860 |
| 8 | Termination of LT XLPE cables ofvarious sizes (One Job means all 4cores of cables).Inspection by-Consignee. | Numbers | 65.00 | 128.07 | 8,324.55 |
| 9 | Supply, fixing & commissioning of LT Heat ShrinkableStraight through jointing Kit for 3.5/4 Core 120-240Sqmm LT XLPE Cable.Inspection by- Consignee. | Numbers | 30.00 | 1,784.77 | 53,543.1 |
| 10 | Supply, fixing, testing and commissioning of DP RCBO's 25 (2P, 30 mA) Amp outgoingconfirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers | 60.00 | 2,336.69 | 1,40,201.4 |
| 11 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 2Way distribution board made up of steel sheet, phosphatised powder paintedcomplete with neutral link, earth point, Din rail and prewired with following items tobe fixed in distribution board and site requirement.Inspection by-Consignee. | Numbers | 60.00 | 275.27 | 16,516.2 |
| 12 | Supply, fixing, testing and commissioning of GRP (Glassfiber reinforced polyester) enclosure IP-66 andmechanical impact IK-10 with polymide screwsconversional not spring loaded type with 120 degreecelcius ambient temp resistance pre-cooling unit (1)-50 square MM bus bar terminal bock-04 nos (2)- 63 AF PMCB 10 KA -01 no. (3)-IP 6763A 5 pin socket-1 no. (4) -IP 6763A5 Pin plug-1 no. with complete internal wiringwith cable wall thickness-3 mm Dimension-[360L X 360HX 205D] MM Wall mounted outdoor type.Inspection by-Consignee. | Numbers | 20.00 | 14,193 | 2,83,860 |
| 13 | Horizontal boring of cable duct through machine at more than 2.1 mtr depth from the bottom of pit and without DWC/GI/HDPE pipes. The work shall be done as per extent practice and instruction of site engineer. | Metre | 1100.00 | 1,002.37 | 11,02,607 |
| 14 | Supply and laying of HDPE Pipes (Upto PN 8.0 Pressure Rating Material Grade: PE 63, Pressure Rating: PN 8.0, Nominal Dia(mm): 110) as per IS- 4984:2016 suitable for HT/LT XLPE cable & as required and as per relevant technical specification. Inspection by-Consignee. | Metre | 1100.00 | 230.37 | 2,53,407 |
| 15 | Supply, fixing, testing and commissioning of LTdistribution board double door type made up ofsteel sheet, phosphatised powder painted completewith neutral link, earth point, Din rail and prewiredconfirming toIS:13032& 8623:1991 of makeHavells, Siemens, L&T, Schneider, Legrand orequivalent with following items of matching maketo be fixed in distribution board, confirming toIS:8828 :1996 or latest, IE rules and siterequirement. 160A microprocessor MCCB 4P 36 KA=01 No. (Incoming) 63A microprocessor MCCB 4P36 KA =04 Nos. (Outgoing) SP MCB 6- 32Amp. 10KA 'C' series = 12 Nos.(Outgoing).Inspection by-Consignee. | Numbers | 1.00 | 1,76,362.34 | 1,76,362.34 |
| 16 | Supply and laying of B class, 50mm dia, GI pipe of for cableriser/road crossing as required andas per relevant technicalspecification. Inspection by-Consignee. | Metre | 40.00 | 132.9 | 5,316 |
| 17 | Supply, erection and commissioning of Industrial welding receptable 63 Amp withintelocked switch, socket and plug-top unit, 5 Pin(3Ph+N+E), 440 Volt AC, 63 Ampswith enclosure, heavy duty Metal clad and socket with threaded cover. CRCA sheetsteel enclosure (IP-55) of 16 SWG thick with extended canopy, Powder coated in RAL7032 grey shade with ample space for 3.5Cx70 sqmm power cableglanding/terminations and front door duly hinged and gasketed. Provision for cableentry from bottom shall be provided. Power supply isolation(On/Off) with heavy duty.Rotary switch rated for 3 ph, 440V AC, 63 Amp. Four pole RCCB, 63 Amp, 30 mAsensitivity. Interlock facility should be provided such that switch can be turned ONonly upon insertion of the plug and can be removed after turning the switch to OFFposition. Unit fully prewired by means of 16 sqmm copper flexible cable andterminated on suitable Alluminium bus bars to facilitate looping. 02 nos Cadmiumcoated earthing studs of size M8x32 mm long with double nut and washer at eitherside of the enclosuer shall be provided. Welding RIB shall be provided with suitablemounting arrangement for fixing in column or wall. Interlock feature: a. Switch can beturned ON only upon insertion of the plug. b. Plug can be removed only upon turningthe switch to OFF position. c. Front cover can be opened only in the switch OFFposition. Wiring: Unit fully prewired by means of 16 sqmm copper flexible ISI markedcable and terminated on suitable alluminium bus bars to facilitate looping. Cableentry: through 2 nos 40 mm dia knockouts provided at the bottom.Inspection by-RITES. | Numbers | 184.00 | 14,980 | 27,56,320 |
| 18 | Design, Manufacturing, Supply,Erection, testing and commissioningof LT switch gear panel board of 02mm Tk. Diapressed CRS steel sheetpanel shallbe treated for anticorrosion treatment and finished withsmoke gray paint as per technicalspecification no. Sr.DEE/G/ALD/Panel-94/113 Comprising with as under:MCCB of 400 A, 36 kA Standardbreaking capacity, 415volt, 3 Phase 4Pole current rating 400 Amp. | Numbers | 2.00 | 15,756.37 | 31,512.74 |
| 19 | Supply of MCCB 125A, 50Hz. 36kAConfirming IS:13947:1995. | Numbers | 16.00 | 6,921.36 | 1,10,741.76 |
| 20 | Supply of Indicator lamps withsuitable holder. | Numbers | 54.00 | 84.98 | 4,588.92 |
| 21 | Supply, fixing, testing, connectingand commissioning ofOutgoing/Feeder Panel MountedMulti-function Mtrs. with AccuracyClass 1 as per IEC 62053- 21 or Class0.5, 0.5S as per IEC 62053-22.LEDMtrs. Cl 1 with RS485:Mtrs. shouldhave following features built-in LED •Flush mounting 96 x 96 mm • TrueRMS measurement • Passwordprotection provision for security •Siteselectable for 3 Phase 4 wire, 3 Phase3 wire, 1 Phase, CT Secondary1A/5A, Universal Auxiliary Supply 80-300 VAC/DC, Input VoltageMeasurement 50-500 VAC, 64samples/ cycle The Mtrs. should beable to read/ display following paraMtrs. Instantaneous Para Mtrs. (V1,V2, V3, V12, V23, V31, Avg (VLN,VLL), A1, A2, A3, Aavg, F, PF-1, PF- 2,PF-3, PF (Avg) W1, W2, W3, W(total) VA1, VA2, VA3, VA (total)Cumulative Numbers 20 2231.9244638.40 Para Mtrs. (Import Wh,Import Vah, Import load hours, Reset(old) Cumulative para Mtrs. (ImportWh, Import load hours,Communication (RS485 ModusRTU).complete with all accessories. | Numbers | 32.00 | 2,694.69 | 86,230.08 |
| 22 | Fabrication works and insulatedAluminum bus bars of 800A capacityfor phases & 800A capacity forneutral Bus bar shall be suitablyinsulated with heat shrinkablesleeves/ epoxy coating/insulating tapto withstand the test voltage of 2.5KV Copper strip for connectionoutgoing as well as incoming withsuitable size be provided. LT Panelform item No. 18 to 22 will beInspection by-Consignee. | Job | 1.00 | 48,171.51 | 48,171.51 |
| Schedule total | ₹88,23,792.35 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022__27_04_227.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_2.pdf
ATTACHMENT
2024_05_14ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
AnnxVIB.pdf
ATTACHMENT
GCCACS2022CORRECTION1.pdf
ATTACHMENT
Likelysourceofsupply.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
TNDoc.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-3113.pdf
ATTACHMENT
2023_08_07RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_4ACS-4.pdf
ATTACHMENT
2023_10_20RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_5ACS-5.pdf
ATTACHMENT
2023_12_21IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_6ACS-6.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .