Day to day repair and maintenance work for residential and non-residential buildings at Ekta Nagar Colony of Majri Area.

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement andmatching pigment etc., complete

Providing and fixing white vitreous china water closet squatting pan(Indian type): Orissa pattern W.C.pan of size 580x440 mm.

Providing and fixing 50 mm dia PVC pipe (4 Kg/cm2) with fitting of approved quality including making holes in wall etc. all complete job as per instruction of Engineer in Charge.

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete40 mm thick with 20 mm nominal size stone aggregate

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make andmanufacture. M.S. frame covered with 5 mm thick heatmoulded PVC 'C' channel of size 30 mm thickness, 70 mmwidth out of which 50 mm shall be flat and 20 mm shallbe tapered in 45 degree angle on both side forming stylesand 5 mm thick, 95 mm wide PVC sheet out of which75mm shall be flat and 20 mm shall be tapered in 45degree on the inner side to form top and bottom rail and115 mm wide PVC sheet out of which 75 mm shall be flatand 20 mm shall be tapered on both sides to form lockrail. Top, bottom and lock rails shall be provided bothside of the panel. 10 mm (5 mm x 2 ) thick, 20 mm widecross PVC sheet be provided as gap insert for top rail &bottom rail, paneling of 5 mm thick both side PVC sheetto be fitted in the M.S. frame welded/ sealed to thestyles & rails with 7 mm (5 mm+2 mm) thick x 15 mmwide PVC sheet beading on inner side, and joinedtogether with solvent cement adhesive. An additional 5mm thick PVC strip of 20 mm width is to be stuck on theinterior side of the 'C' Channel using PVC solventadhesive etc. complete as per direction of Engineer-incharge,manufacturer's specification & drawing. 30 mm thick plain PVC door shutters

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates atthe junctions and corners, all necessary fittings complete,including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock wood 30 mm thick shutters.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Ply wood 5 ply, 9 mm thick Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type

Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Supplying of water proofing compound of approved manufacture etc. complete as per instruction of Engineer-in-charge.

Application of water proofing compound by deploying necessary manpower and other items etc. complete as per instruction of Engineer-in-charge.

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceablematerials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Clearing wild grass/shrubs/vegetations/bushes up to 10 cm girth by engaging brush cutter machine and removal of rubbish up to a distance of 50 mtrs. Out side the periphery of the area cleared. The cost is incusive of hireing charges of machine POL, operator,cutting tools and Grass should be cut nearest to the ground level.Surface area where ever brush cutter can not be used should also be cleared by engaging manpower.etc all complete as per instructions of E/I.

Transportation of rubbish / branches of cut trees by engaging tractor - trolly,clearing the area as per the instruction of the Engineer-in-Charge with a lead up to 2 Km.

Providing sanitary workers for cleaning of jammed sewarage line/ inspection chambers/ manhole, bath/kit jammed CI trap by taking out nahani trap, precast slab wherever requried and re-fixing same etc.all complete job including disposal of dead bodies of dogs, cats and other small animals etc. from colony premises as per instruction of Engineer-in-charge.

Attending day to day complaints related to carpaintary works such as easing in door/ window , repairing of old door/ window shuutter preparation of new shutters including tools and plants required for carpaintary works etc all complete as per direction of engineer incharge

Cleaning of RCC/Polyethylene over head tanks from all dirt, dust, silt etc. by disinfecting agen like bleacning powder etc.all complete, as per directions of Engineer-in-charge. 500 liters capacity tanks.

Cleaning of RCC/Polyethylene over head tanks from all dirt, dust, silt etc. by disinfecting agen like bleacning powder etc.all complete, as per directions of Engineer-in-charge. 1000 liters capacity tanks.

Drain cleaning including removing the muck, slush, sludge, plastic disposal to a distance of 50 mtrs. Or nearest dust bins or to the place designated by the Engineer-in-charge.Making the surrounding of drain clean on either side of the drain up to a maximum of 1 mtr. wherever possible, spreading bleaching powder whenever required after drain cleaning is done.Work is to be done as per instruction of Engineer-in-charge.(a) Drain size below width of 500 mm. (Bleaching powder will be supplied by department).

Drain cleaning including removing the muck, slush, sludge, plastic disposal to a distance of 50 mtrs. Or nearest dust bins or to the place designated by the Engineer-in-charge.Making the surrounding of drain clean on either side of the drain up to a maximum of 1 mtr. wherever possible, spreading bleaching powder whenever required after drain cleaning is done.Work is to be done as per instruction of Engineer-in-charge.(a) Drain size above width of 500 mm. (Bleaching powder will be supplied by department).

Collection and disposal of all type of garbage by deploying mechanical means (preferably Tractor Trolly) from the dustbins of the colony or from the places as designated by Engineer-in-charge. Garbage is to be collected on regular basis and disposal of the same at designated places with a lead of 2 Km (No voide shall be deducted while calculating the volume).

Assistant to departmental fitter by engaging unskilled manpower in attending minor/major water supply complaints as per instruction of Engineer-in-charge.

Welding by gas or electric plant including transportation of plant at site etc. complete.

Providing and Supplying 12 mm thick BWP plywood ( ISI mark) approved brand as per direction of Engineer incharge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and : Cement morter 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Providing, hcisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Total impact of GST for the purpose of CTC

SINGH CONSTRUCTION

Rudrana Associate

PRASHANT RAMBHAU PETKULE