REPAIR TO ROADS, FOOT PATH, KERB STONE AND ROAD FURNITURE IN SEKHON VIHAR AREA AT AF STN PALAM UNDER GE (AF) GURGAON NO 1

Material and Labour for preparation of old black bituminous top surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose diert etc. and apply a tack coat with paving bitumen of VG-10 @ 5 Kg per 10 Sqm, complete all as specified and directed.

Material and Labour for Bituminous semi dense asphaltic concrete 30 mm consolidated thickness with 5.50% binder content by weight of total mix using paving bitumen VG-30 grade laid with mechanical paver, rolled and compacted to required camber and gradient with vibromax road roller, complete all as specified and directed.

Material and Labour for Bituminous semi dense asphaltic concrete 40 mm consolidated thickness with 5.50% binder content by weight of total mix using paving bitumen VG-30 grade on WBM surface laid with mechanical paver, rolled and compacted to required camber and gradient with power road roller exceeding 8 tonne and not exceeding 12 tonne, complete all as specified and directed.

Material and Labour in repair to potholes of any depth, not exc 1.00 sqm each including sweeping free from dust and mud of water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sqm, rolled and consolidated to reqired gradient and camber with power road roller exceeding 8 tonne and not exceeding 12 tonne, complete all as specified and directed.

Material and Labour for Premix bituminous macadam, macadam laid/ rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) using paving bitumen of VG-10 at the rate of binder content 4% by weight of total mix, complete alll as specified and directed.

Material and Labour for painting lines dashes, arrows letters ect on roads pavement by applying thermoplastic paint confirming to IS: 164-1981 (First revision Reaffirmed in 1986) (5 Kg/Sqm) with glass beads potters (250 gms) 2 mm to 2.5 mm thick and 10 cm/ 15 cm wide strips on bituminous road surface and road marking (by Hot Mechanical process with Road Marking Machine) including complete all as specified and directed.