CERTAIN REPAIRS TO BLDGS ALSC, ORTHO-II, CARDIOLOGY AND CERTAIN WARDS AT BASE HOSPITAL UNDER GE E/M BASE HOSPITAL DELHI CANTT-10

Amount

Dismantling wall, ceiling boards (Fibre pulp. Insulation, AC boards, wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness including existing snap grid or ceiling cover fillets including disposal of all debris exc 1.5 KMtr but not exc 5 Km complete all as specified and as directed.

S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 MM of approved texture,design (Tegular) and patterns having moisture content white colour less than 2% humidity ressitance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85%(Min) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.Complete all as shown in drawings, as specified and as directed.

M&L for CEILING PANELS: Pre-fabricated Modular ceiling Panels, 50mm thick, with sloping panels PUF panels, between one sheets of 0.8mm & One Sheet 0.5 mm PPGI (Pre Painted Galvanized Steel) having PUF density of 40kg/m3 with proper supports. Wall panels shall be fixed to the floor with Channels & anchor fastener and interlocked with each other thru CAM LOCK system. Ceiling Panels shall be supported with wall panels thru L type Flashing, CAM LOCK system and ceiling support system as required. Panels including cutouts for lights, pendants, electrical switch sockets etc. Antibacterial & Antifungal paint coating supply and installation of jointless coating: for wall ceiling and corner panels: filling of all joints and cavities with metal epoxy filler and sanded flush to provide a seamless finish including one primer and three coats of antibacterial and anti fungal paint equivalent to a min dry film thickness of 300microns complete all as specified and as directed (Paint-SKK Japan) (PPGI Sheet Make‐ Tata steel / Bhushan / National. (Make- MHS , CHP)

Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris removed in MOD land complete all as specified and directed.

M&L Vitrified ceramic tiles dark /shade double charged /ultra charged Ist quality 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No. 8 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for 7mm to 8mm thick Ist quality ceramic non skid tiles coloured of area exc 0.11 Sqm but not exc 0.18 Sqm (400mm x 400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles laid over and including 15mm thick cement screed (1:6) all as specified and directed.

M&L for digital coloured glazed ceramic tiles of size 400 x 300 x 7mm thick or 600x300mm size 7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) complete all as specified and directed. Note:- (Rate of Designer border in vertical surface shall deemed to be included in quoted rates)

Taking down aluminium door chowkat any size with shutter incl all fittings complete all as specified and directed.

Taking aluminium window/ventilators chokhat any size with shutter incl all fittings complete all as specified and directed.

S&F aluminium powder coated door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf of Make Classic/Argent as approved. f) Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 12mm thick prelaminated particle board laminated both side exterior grade and lock including complete all as specified and as directed.

M&L 12mm thick toughened glass door shutter including floor spring , patch fitting (top and bottom) and incl all accessories wall connecting angle and handle (minimum 45 CM) etc fixed with standard stainless steel fittings complete all as specified and as directed.

Supply, fabrication & fixing in frame and windows of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections : (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick(d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass( Modi/Saint gobain/tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed.

S&F in repair 18/19mm thick PVC moulded solid board one side prelam for cabinet boxes etc with self and shutter full size fitted under/ above the kitchen cooking platform and other platform as per drg incl provision of fixing arrangement /fixing & fixtures (magnetic catches, piano hinges and knob etc) complete all as specified and as directed.

Demolition of stone slabs laid bedded and pointed in any mortar and cladding tiles of any description or thickness in floors, aprons, walls, etc and removing the debris off MOD land complete all as specified and directed.

S&F 2mm antistatic seamless PVC flooring, Floor shall be smooth, non stlip impervious material conductive enough to dissipate static electricity but not conductive enough to endanger personnel from electrical shock. Electrostatic charge dissipation combat PVC seamless flooring of very high quality should be provided. Thickness not less than 2mm, continuous roll shall be used and joints shall be welded by special PVC thermal welding units using PVC welding bars of same colour. The sheets shall be highly durable with resistance to shock and indentation. It shall be scratchproof also. The conductive material shall be uniformly impregnated as grains. It should be inert to body fluids, chemicals and disinfectants. shall not be affected by temperature variation within the OT. The floor shall be efficiently discharge electric charges up to 2KV. Flooring shall be done by skilled workers of accredited agencies authorized by the supplier of PVC sheets. The electrical resistance(Point to ground) shall be within 2.5 x 10 power of 4 to 5 x 10 power of 6 Ohms. The floor shall be not allow build up of electrical charge beyond 100 Volts due to antistatic effect. The corners shall not be terminated sharply and concealed cove-former (aluminium) shall be used to overlap the wall panel to a height of approx .25mm and sealed perfectly and uniformly. Self levelling compounds shall be used. The conductive copper grid laid underneath the PVC sheet shall be supported by liquid epoxy compounds allowed to set as a uniform and level surface. The copper by liquid epoxy compounds allowed to set as a uniform and level surface. The copper strips to be made visible by grinding and no copper strip shall project more than 0.5mm above level surface to avoid damage to the PVC sheet. One earthing lead shall be made visible by Grinding and no copper strip shall project more than 0.5mm above level surface to avoid damage to the PVC sheet. One earthing lead shall be brought out from every 150 sq ft area and attaching it to the main earthing strip/ground. Copper grounding strips (0.05mm thick,50m width) shall be laid flat on the floor in the conductive adhesive and connected to copper strip of grounding. The connection from copper grid shall be brought out uniformly at places to form equipotential grid. Flooring shall be mechanically shock proof, scratch proof, flame retardant and anti microbial. Corners shall be uniformly curved. Final surface shall be non corrosive to biological fluids an detergent. Colour shall be uniform pleasant and matching with ambience complete all as specified and as directed. ( Make - Gerflor, Tarkett or Equivalent)

M&L for wall PANELS: Pre-fabricated Modular wall Panels, 50mm thick, with sloping panels PUF panels, between one sheets of 0.8mm & One Sheet 0.5 mm PPGI (Pre Painted Galvanized Steel) having PUF density of 40kg/m3 with proper supports. Wall panels will be fixed to the floor with Channels & anchor fastener and interlocked with each other thru CAM LOCK system. Wall Panels will be supported with wall panels thru L type Flashing, CAM LOCK system and ceiling support system as required. Panels including cutouts for lights, pendants, electrical switch sockets etc. Antibacterial & Antifungal paint coating supply and installation of joint less coating: for wall ceiling and corner panels: filling of all joints and cavities with metal epoxy filler and sanded flush to provide a seamless finish including one primer and three coats of antibacterial and anti fungal paint equivalent to a min dry film thickness of 300microns complete all as specified and as directed (Paint-SKK Japan) (PPGI Sheet Make‐ Tata steel / Bhushan / National. (Make- MHS , CHP)

Demolition of Mud in roofs, any thickness, including PCC/plastering and leeping complete and removing the spoil to a distance exc 250 m but not exc 500 m complete all as specified & directed.

M&L for providing plain cement concrete, type B-1, 1:2:4 (using 12.5 mm graded stone agg) as in roof padding, Gola, etc including cleaning the surface by wire brushing complete all as specified and directed.

M&L for 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)

Supply only water proofing compound (powder)complete all as specified & directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction.(Make:- IWL India Ltd,STP Ltd or Torch Tar Membrane/Choksg chemical pvt ltd) (c) M&L for finishing of top surface by a coat of aluminium paint complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. any description complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 brick surfaces of walls finished the surface fair and even without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in Cement Mortar 1:6 on brick or concrete, surfaces of walls finished the surface even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of new wall surface and applying two coats of plastic emulsion interior gde paint of tint as approved on walls over and including a coat of priming paint over and including applying 3 mm thick wall care putty complete all as specified and directed. (Note: The work shall be executed by skilled applicators approved by the manufacturing company). Make-Asian Paint Royal Luxury emulsion or equivalent of make Berjer/Shallimar/Jenson & Nicholson pains.

M & L preparation of new surfaces of walls plastered and applying two coats of cement base paint to walls to obtain uniform surfaces complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description and including disposal of all debris complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified and as directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern) white (squatting pan & trap including connection to drain (or out going pipe and to flushing pipe anti symphonic pipe etc complete all as specified and as directed.

S & F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair Wall mounted grab bar 300 mm and fixed in position complete all as specified and directed

S& F in repair PVC valve less symphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and as directed. Make-Cera/ Parryware/Hindware

Taking down chowkhats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening complete all as per manufacturer instructions, specification, drawings and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails eith suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing inthe frame at site as per specification & drawing incl 3 Nos 100mm stainless steel Hinges, 2 Nos 200 mm Aluminum Tower bolt and 2 Nos 150 mm Aluminum handle complete all as specified and directed.

Dismantling CI, PVC (any type) pipes of any dia, any pattern including all fittings complete all as specified and as directed.

S&F 75 mm dia Hubless cast iron pipes, waste and vent pipes in any length with or without ears, fixed to walls with stack clamps including bends, elbows and Tees or laid in trenches or in floors or walls and complete all as specified and directed.

S&F 100 mm dia Hubless cast iron pipes, waste and vent pipes in any length with or without ears, fixed to walls with stack clamps including bends, elbows and Tees or laid in trenches or in floors or walls and complete all as specified and directed.

S&F in repair 100 mm dia cast iron floor trap including joints, etc complete all as specified and directed.

S&F in repair 100 mm dia cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connections including for refixing or removal to store.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store.

S&F 15mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and as directed.

S&F 20mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed.

S&F in repair 15 mm bore angle cock with flange, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. (Make: Prayag, Cat No. 8710 or equivalent model of ZIM/ESSCO)

S&F in repair soap dish compete all as specified and directed (Make : Prayag, Cat No. BA-55 or equivalent model of ZIM/ESSCO).

S&F in repair towel rail compete all as specified and directed (Make : Prayag, Cat No.BA-03 or equivalent model of ZIM/ESSCO).

S&F in repair corner glass shelf 300 mm with ABS brackets complete all as specified and directed. (Make : Prayag , Cat No. BEA-46 or equivalent model of ZIM/ESSCO)

S&F in repair oval type vitreous china wash hand basin snow white of size 560mmx470 mm including cutting for and pinning in end of brackets,15mm angular stop cock, 32 mm waste fittings, PVC connections as per reqd size, brass chromium plated for glazed ware sinks, basins etc. including 15 mm bore CP fancy type pillar tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. Make- Cera Cat No. 1005A or equivalent model of Hindware/ Parryware

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc to be measured separately) and making good disturbed surfaces of wall floor etc complete all as specified and directed.

M&L point wiring for modular switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through existing concealed Conduit as requirement of site including cadmium plated screws as per ISI, including 1.5 Sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light point controlled by one switch 5 Amps one way single pole complete all as specified and directed.

All as per item No. 52 here-in-before but one three pin 5 Amps socket out let on independent board.

All as per item No. 52 here-in-before but one three pin 5 Amps socket out let on same board.

All as per item No. 52 here-in-before but point wiring with copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm size of earth conductor complete all as specified and as directed.

All as per item No. 52 here-in-before but point wiring with copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on same board with 2.5 Sqmm size of earth conductor complete all as specified and directed.

All as per item No. 52 here-in-before but point wiring with copper cable multi stranded 4.00 Sqmm size for AC point wiring with 4.0 Sqmm size of earth conductor complete all as specified and directed.

S&F in repair modular switch 1 way 10 Amp 1 Module complete all as specified and as directed Make :- Anchor woods or equivalent model of Legrand/Crabtree.

S&F in repair for Modular Switch 1 way 20 Amp 1 Module complete all as specified and as directed. Make :- Anchor woods or equivalent model of Legrand/Crabtree.

S&F in repair Modular Socket 6 Amp, 2/3 Pin combined 2 module complete all as specified and as directed. Make :- Anchor woods or equivalent model of Legrand, Crabtree.

S&F in repair Modular Socket 16 Amp/6 Amp 2/3 Pin combined, 2 module complete all as specified and as directed. Make :- Anchor woods or equivalent model of Legrand/Crabtree.

S&F in repair module cover plate with frame for following module complete all as specified and as directed. Make :- Anchor woods or equivalent model of Legrand/Crabtree.

3 module

6 module

8 module

12 module

S&F in repair Modular metal Flush box complete all as specified and as directed. Make Anchor Woods or equivalent model of Legrand/Crabtee :-

3 module

6 module

8 module

12 module

S & F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed. Make : Legrand Model: 507611 or equivalent Model of Siemens / Schnieder/Havells.

S &F in repair distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed. Make : Legrand Model: 507612 equivalent Model of Siemens / Schnieder/Havells.

S & F in repair distribution board (DB), double door type made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way vertical with 200 Amps rated copper busbar, 415 Volts with in built MCCB 125 Amps, 10 KA, 01 No., earth bar IP 43 protection, flush to wall complete all as specified and directed. Make : Legrand Model: 507747 or equivalent Model of Siemens/ Schnieder/Havells.

S&F in repair sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and directed.

M & L in replacement Sub main wiring using two single core PVC insulated FRLS cable 2.5 sqmm copper conductor multi stranded and 2.5 sqmm copper conductor insulated cable using as earth wire and drawing in to and including 20mm medium grade PVC conduit complete all as specified and as directed. (Note: Two runs of 2.50 sqmm copper FRLS cable & one run of 2.50 sqmm copper cable in and including 20 mm PVC conduit medium grade shall be measured as one unit).

M & L in replacement sub main wiring using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire and drawing in to and including 25mm, medium grade PVC conduit.(Note :-Two runs of 4sqmm copper FRLS cable & one run of 4.0 sqmm copper cable in and including 25mm PVC conduit medium grade shall be measured as one unit).

M & L in replacement sub main wiring using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire and drawing in to and including 32mm, medium grade PVC conduit. Note Two runs of 6 sqmm copper FRLS cable & one run of 6.0 sqmm copper cable in and including 32 mm PVC conduit medium grade shall be measured as one unit.

M & L in replacement sub main wiring using four run PVC insulated FRLS Copper conductor 10 sqmm with rigid non metalic PVC conduit of size 40 mm dia medium grade inclusive of boxes (junction/terminal) all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook including all fixtures /fittings fixed on wall/ceiling with saddles PVC with earth continuity wire copper conductor PVC insulated unsheathed 10 Sq mm etc complete all as specified and as directed. (Note: four runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 40 mm PVC conduit medium grade shall be measured as one unit).

S&F in repair Energy efficient glare free symmetrical illumination recessed mounted 36 Watt 2X2 LED Panel with Aluminium Frame for POP/Gypsum Board (ALFRAME2X2POP/GBR), 5700k to 6500k luminaire, Total system Lumen of 34W to 36W LED shall be 3600 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 10,Electronic driver (LEDDRIVER36V36WS) Powered by independent isolated, SELV output electronic driver, with Average life of 50000 Burning hours. complete all as specified and as directed. Make - Havells cat part No. - VENUSNEOHE2X2PLR18-42WLED857MOD + LEDDRIVER36V36WS/ Wipro Cat Part No. - CRCO10R038HP57GL1 / Philips Cat Part No. - RC380BLED36S6500G4L60W60PSUODOC

S&F in replacement energy efficient Surface/Wall Mounted 20W integrated LED batten 4 feet Fitting with polycarbonate housing. Total system Lumen of 20W to 22W LED shall be 2200 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours complete with all accessories as required with connections complete all as specified and directed. Make - Havells Cat Part No. - LUMILINEBS20WLED865SPCWH/ Wipro Cat part No. - LL20221XXX65NE3 or equivalent Model of Philips.

S&F in replacement energy efficient LED batten tube light, Surface/Wall Mounted 9W to 10W integrated LED 2 feet Fitting with polycarbonate housing. Total system Lumen of 9W Led shall be 990 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp, LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours. Complete with all accessories as required with connections complete all as specified and as directed. Make Havells Cat Part No. - LUMILINEBS9WLED865SPCWH/ Wipro CAT Part No. - LL20111XXX65NE3 or equivalent Model of Philips/CG.

S&F in repair energy efficient LED down lighter 12 W , 230 Volt, 6500K ,Recess mounted, compact vertical, round shaped downlighter with removable driver suitable for low ceiling heights complete all as specified and as directed. Make: Havells Cat Pt No: ENDURANEODLR12WLED830S or equivalent Model of Bajaj/ CG/ Philips/ Wipro

S & F in repair Earthling complete with galvanised GI earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5mtr below normal GL surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Bldg at another end, GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate upto main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforced with MS bars 8mm dia @ 150C/c both ways complete with lifting handle all as shown in electrical plate no 5 of SSR of part-I (1991) complete all as specified and as directed.

Taking down existing medical gas out let terminal units, oxygen flow meter, humidifier, copper tube with fitting angle tray copper tubes upto 28mm dia, medical gas monitoring alarm system and refixing the same thourgh wall and painting with colour code practice complete all as specified and directed.

Supply, install, testing and commissioning in replacement hard drawn seamless non phosphorous deoxidized non arsenical half head tampered and degreased copper pipe of 12mm outer dia and wall thickness 0.7mm manufacturel as per BS-2871 Part-I table 1971 and chemical composition as per BS-6017 of table-2 CUDHP complete with all fittings complete all as specified and as directed. Make :- Germs/Max Flow/ Metal Export

S&F in replacement oxygen gas out let with matching stainless steel probes all as specified and directed.

S&F in replacement vacuum gas outlet with matching stainless steel probes all as specified and directed.

S&F in replacement MA4 with matching stainless steel probes all as specified and directed.

Supply, Installation Testing & Commissioning in replacement Weatherproof Analogue Addressable Manual Call Point with Integral Short Circuit Isolator. The call point shall have Fast response, Integral short-circuit isolator, Bi-coloured status LED, Non-frangible element fitted as standard (conforms to EN54), Surface mounted, IP67 rated, LPCB approved to EN54 complete all as specified and as directed. Make :- Honeywell/Siemens/Panasonic/Hochiki/Edwards/APPOLO

Supply, Installation Testing & Commissioning in replacement microprocessor based Networkable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have expandable capacity up to 16 loops. The Panel must have Full colour 800 x 480 LCD with resistive touch screen and automatic backlight dimming. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The panel shall have an event log of minimum 10,000 events @ 1 second resolution, Filterable and Printable. The Panel shall have Three access levels. Panel shall support upto 5000 Cause & Effects entries, with upto 20,000 inputs controlling & 20,000 Controlling outputs across the network. The Panel shall have capability for Peer to Peer networking through RS485 network card. The Panel must have 4 inbuilt programmable sounder circuits, each circuit rated at 2.5A.The Panel must have inbuilt 3 programmable inputs and 5 inbuilt programmable relay outputs. The Panel shall have up to sub-addressable 512 programmable Inputs/Outputs via optional RS485 COMMS serially connected expansion cards. The Panel shall have 240 V AC power supply along with automatic Battery Charger. The Panel shall be fully expandable via common plug in loop driver boards. The user shall have a choice of using the panel with 5.25 Amp or 10.25 Amp power supply unit which is inbuilt in the FACP and should be approved to EN54-4. The Panel shall have configurable via USB port to PC or memory stick. The Panel shall have dedicated RS232 serial port for optional printer approved by LPCB complete all as specified and as directed. Make :- Honeywell/ Siemens/ Panasonic/ Hochiki/ Edwards/ APPOLP

S & F in replacement Rigid steel conduit 20 mm dia medium grade for fire fighting system control cables incl junction box with cover for connecting on roof and wall of OT as directed and specified by Engr-in-Charge.

Supply and fixing in replacement heavy grade wire with PVC insulated copper solid conductor 1.5 Sqmm nominal cross section for fire fighting system complete all specified and as directed.

Taking down / Dismantling carefully the automatic sliding door and connected wiring and other item including making the surface normal for fixing new door complete all as specified and as directed.

S&F Hermetically sealed automatic sliding door 5 x 7ft for Operation theatre complete all as specified and as directed with following specifications :- MOC : HPL Sloping Top. RAIL CONSTRUCTION : Aluminium Profile DOOR BLADE : 60 Mm Thick With 0.6mm HPL On Both Sides. The Above Panel Will Be Framed In Anodized Aluminium Profiles. GASKET : On All 4 Sides Of The Door Blade Is A Special Rubber Gasket. OPENER : Stainless Steel Lever Handle On Both Sides WINDOW : 300mm X 300mm DOOR FRAME : Single Aluminium Frame Profile, Fixed To Finished Wall, Not Wall Surrounded AUTOMATION : Electric, Type SDA-04, 230V SAFETY : Photocell In The Frame SWITCHES : Radar Hand Switch, Foot Switch LOCK : Manual lock with MEDICAL EARTHING Make : Western India Electromedical Systems Pvt. Ltd./Tanvi Enterprise/Hospedia Medicare Pvt. Ltd/Hermed Meditech Solutions

Vishal Traders

J.P. Enterprises

DP Traders