SPL REP TO 02 GD POST BLDG NO P/220 AND P/224 INCL SEPTIC TK AT PERIMETER OF 31 FAD, PROVN OF 01 X TOILET BLOCK WITH COMPLETE SANITARY FITTINGS ADJACENT TO BLDG NO C/13/121 (DUTY CLK ROOM) AT MH AND CERTAIN SANCTIONED WKS UNDER GE PANAGARH(2ND CALL)

Amount

Takind down GI tubing of 15 mm dia and connection and including cleaning for refixing or removel complete all as specified and directed.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and directed.

Fixing only 15 mm dia old galvanized pipes incl new fittings where necessary fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15mm dia bib tap cast copper alloy chromium plated with crutch (or) butterfly handles, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm bore stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head complete all as specified and directed.

S & F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm, including fixing accessories like galvanised brackets & rag bolts and waste pipe, complete all as specified and directed

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store complete all as specified and directed.

Taking down chowkhat frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store complete all as specified and directed.

S & F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified directed.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F Factory made, 35 mm thick, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

S&F steel windows with side hung shutters (steel section weighing min 1.42 Kg/m) including projection type hinges with steel hanle, and steel peg stay,complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be min 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.

S & F steel ventilators with centre hung shutter (minimum wt. of steel section should be min 1.42 kg/M) including hinges, steel peg stay, complete all as specified and directed.

S & F mild steel flat iron of size 30 x 5mm in hold fasts inserted brick wall etc complete all as specified directed.

M & L cutting holes in brick walls exc half brick but n. exc one brick for inserting holdfasts and making good dismantaled portion in cement mortar (1:4) or cement concrete 1:2:4 type B-1 built in cement mortar complete all as specified and directed.

S & F in repair hat and coat hooks, soild body aluminium 175 mm to 250 mm fixed to wall with screws and rawl plugs, fixed complete all as specified and directed.

S&F drapery rod (conduit) of dia not less than 25mm having a corrugated virgin PVC extrusion on it finals of approved shade with standard MS powder coated/ brackets, fixed to walls with rawl plugs and steel screws complete all as specified and directed.

M & L in repair Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S& F cast copper alloy, chromium plated towel raiI 20mm dia 'D' type and 60 cm long between flanges compIete all as specified and directed.

S & F in repair 4mm thick glass sheet ordinary quality and glazing with in square, n exe 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator complete all as specified and directed.

S & F in repair Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

S & F 4mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and directed.

S & F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F stainless steel butt hinges, medium weight and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) fixed in cement mortar (1:3) complete all as specified and directed.

S & F chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F aluminium anodised barrel tower bolt of extruded section of length 150 mm complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair cast copper alloy, chromium plated long neck pillar cock suitable for 15 mm bore pipe complete all as specified and directed.

S&F 100 mm cast iron sanitary conection socket to fit WC outlet complete all as specified and directed.

S & F 15mm bore piller taps cast copper aIloy, with capstan heads, chromium pIated, screwed down, fancy type high pressure, with or without lettred 'HOT' or 'COLD' with long crewed sunk and fly nuts complete all as specified and directed.

S & F waste coupling of PTMT(half or full threaded) (minimum M 45 gm dia of discharge pipe 32 mm complete all as specified and directed.

S & F in repair CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm) complete all as specified and directed.

S & F in repair Cast iron 'P’ or ’S’ trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified and directed.

S & F in repair CP Stop valve (fancy type), any description, suitable for 15mm bore pipe fixed complete all as specified and directed.

S & F high pressure PTMT ball float valve suitable for size of 25 mm dia with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including GI fitting as required after taking out old unservicable one complete all as specified and directed (Item Code 153).

M & L for 25 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as specified and directed.

M & L for 50 mm bore gate valve gun metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as specified and directed.

S & F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets) compIete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F vitreous china squatting pan 'Orissa' pattern long pan including provision of lime concrete beddìng fixed in repair size 580 x 440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S & F Viterous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Dismantaling of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M&L lor flyash brickwork with subclass 'B' bricks, straight or curved on plan exe 6m mean radius, built in cement mortar (1:6) complete al as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exe 6m mean radius, built in cement mortar (1:4) complete all as specified and direcetd.

M & L brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and direcetd.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of putty complete all as specified and directed.

M&L for preparation of old surfaces of walls and apply two coat of oil bound distemper to walls complete all as specified and directed.

Material and labour for preparation of old surfaces of walls and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M & L for applying two coats of white washing on old ceiling/ chajja surfaces including preparation of celing surfaces complete all as specified and directed.

M & L for two coats of cement base paint on newly wall surface including chalk whiting, including preparation of newly plastered surfaces complete all as specified and directed.

M & L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying three coats white ash complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M & L for rendering 20 mm thick in cement plaster in two coats (each coat 10mm thick) on fair faces of brick work in cement mortar (1:4), finished even and smooth without using extra cement on walls complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on external surfaces of brick work in cement mortar 1:4 and applied with WPC including fair finishing without using extra cement (WPC will be measured and paid separately) including neeru finish to plastering complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even without using extra cement

M & L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in Cement Mortar (1:3) on other than fair faces of brick/ concrete surfaces finished (even and smooth without using extra cement) on ceiling surface complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in cement mortar (1:4) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 350 x 250 x 6-7mm / 450x600x6-7mm thick quality not less than group II, straight edge, k, as on skirting, dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick backing coat in cement mortar (1:6) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as be approved by GE.

M & L for Non-skid ceramic, joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06 Sq.m but not exceeding 0.16 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as be approved by GE.

M & L Glazed coloured joint free ceramic tiles in \/erticaI surface size 300x 600x 6 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as be approved by GE.

Material and labour for non skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed with neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as be approved by GE.

Demolition and breaks up drain pipes (Salt glazed ware, AC or cast iron or re-inforced concrete drain pipe) set in cement mortar internal dia of pipe 150mm complete all as specified and directed.

S&F salt glazed stone waste drain pipes 150mm bore confirming to IS 651-1992 laid in trenches and jointed complete all as specified and directed.

M&L for concrete bed to 150 mm dia drain pipes including packing under, haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 complete all as specified and directed.

Demolition PVC rain water 100mm dia cement mortar and removing from site completed all as specified and directed.

S&F cast iron soil, waste and vent pipes (sand cast pipes) 100 mm bore in any length with or without ears, with cement joint laid in trenches or in floors complete all as specified and directed.

M&L for RCC pipes 600 mm dia class NP3 laid in tranches and jointed complete with collars all as specified and directed as Engineer-in- Charge

S&F cast iron soil, waste and vent pipes (sand cast pipes) 75 mm bore in any length with or without ears, with cement joint laid in trenches or in floors complete all as specified and directed.

S & F bends 100 mm dia disminishing pieces or tapper complete all as specified and directed.

All as per Item No 86.00 here-in-above but for 75 mm dia complete all as specified and directed

Supplying and laying of Supreme Eco drain Hi-tech pipe drainage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with couplar ,bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed.

S&F cast iron floor trap including jointing to waste pipe in run lead, dia of outlet 75mm complete all as specified and directed.

S&F cast iron cowels 75 mm bore complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron size 25 mm x 3mm including nuts, bolts etc complete all as specified and directed.

S & F PVC (SWR) 110 mm dia bends any radius complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Surface dressing n.exc 15 cm deep and site clearance complete as specified in soft /loose soils.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Rough excavation not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out hard and dense soil complete all as specified and directed.

Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out soft and loose soil complete all as specified and directed

M&L PCC (1:3:6) type C-2 (using 40mm graded aggregate),75 mm thick as sub base in flooring finished fair and even without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

M&L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed complete all as specified and directed.

M & L for hard core broken stone or boulder of gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exe. 15 cm thick, watered and rammed to a true surface

M&L for moorrum filling in foundation laid in layers n. exc. 15cm thick, spread leveled and rammed including watering complete all as specified and directed.

M&L for moorum filling 100 mm thick as in road sub bases laid in layers n.exc 10 cm thickness spread, levelled, watered and rolled with 8 to 10 ton power roller complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigments complete all as specifièd and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 (using 20m graded stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed.

M & L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M & L for PCC 1:3:6 type C-2, 75 mm thick (using 20mm graded stone aggregate) as in plinth protections complete all as specified and directed.

M & L for 40mm thick PCC (1:2:4) type B-I (using 20mm graded stone aggregate) as in floor finish complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregates) as foundation filling as a mass concrete.

M&L for PCC 1:2:4 B-1 (using 20 mm graded stone aggregate) as on copping, berbs, apex stones bed plate complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring all as specified.

M & L for 75 mm thick cement concrete type B-1, 1:1.5:3 (20mm graded stone aggregate) as in flooring complete all as specified and directed.

M & L for 150 mm PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in paving finished even and fair complete all as specified and directed.

M&L for Soling 150 mm thick (or sub base) with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for 150 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in floors, pavings etc complete all as specified and directed.

M&L for 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring finished fair and even using extra cement complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in base of floors complete all as specified and directed.

M&L for providing 100 mm thick PCC (1:2:4) type B-1 (using 20mm graded aggregate) as in flooring including finishing cement mortar surface even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

M & L for 40 mm thick precast louveres and jallies (measured solid) in cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggreagte) including all moulding but exc frame and set in cement mortar (1:4) complete all as specified and directed.

M&L for PCC 1:2.4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed Note: Form work required for these items included in the unit rate of this item.

M&L for 100 mm thick cement concrete type D-2, (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for one 5.5 mtr wide and 2.1 mtr height gate with brick pillar, excavation in soft/loose soil, removal of surplus spoil upto 50 mtr, RFR, PCC (1:4:8) in fdn, brick work in cement mortar (1:4), rendering 15 mm thick in cement mortar (1:4), PCC (1:2:4) as in bed blocks/coping, painting, mild steel work in gate angle iron, flats, roller and 'T' iron in track & mild steel plates etc, painting steel surfaces with synthetic enamel paint and cement base paint two coats on plastered/ unplastered surface complete all as specified and directed.

Cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar (1:2:4) type B-1 smooth finished and reforming benching for internal dia of pipe 200mm complete all as specified and directed.

Demolition of reinforced cement concrete any thickness complete at as specified and directed.

M & L for precast RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) cement concrete cover slab for manhole and similar article with plain face, set in cement mortar (1:4) complete all as specified and direceted.

M & L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 (1:2.4) (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 (12:4) (20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed

M&L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate) in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC (1:1,5:3) type A1 nominal mix, (using 20 mm graded stone aggeagate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shel\/es and the like as specified. Note : Reinforcement and formwork shall be measured and paid for separately.

M&L for reinforcement cement concret (1:2:4) Type B-1 (using 20mm graded stone aggregate) for Chajjas complete as specified and directed.

M & L for mild steel TMT bars10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No 144.00 here-in-above but for 5 to 8 mm dia and over in stirrups, spacers and binders complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sIoping)for fair finish surface complete all as specified and directed.

Use and waste of form work to sides and soffits of floor roof beams, beam haunching , girders, bressummers lintels, cantilevers, shelves including supports, edges, over hangs, etc also splays between floors and beams , etc complete all as specified and directed.

Use and waste of formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n.exc 10cm etc for fair finished surface complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for base plate in bottom 10 mm dia and jointing complete all as specified and directed.

M&L for 16mm dia nut and washer etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/stopped ends etc. complete all as specified and directed.

M&L for extra for forming fair finish drain chanel 45 cm inner girth in cement concrete using extra cement complete all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' for 75 mm thick concrete slab.

M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Kg per sq. m complete all as specified and directed.

M & L for Framed work such as grills, gates, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors;Iadders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde- E-165 complete as specified and directed.

M & L for providing APP based membrane course roof treatment in layers with following provisions:- (i) 20 mm thick (average) screed bed or bedding layer in cement mortar (1:6) and finished the surface even & smooth without using extra cement on top of the roof surface. (ii) Applying one coat of bituminous primer, polymerized primer oil based coat, evenly @ 0.3 Kg/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the based primer shall be allowed to e\/aporated completely. (iii) Applying APP based pre fabricated with non-woven polyester reinforced membrane stabilised with fibre glass strands & top with grey mineral slates, not less than 3mm thick and not less than 3 Kg/Sqm by torch application method.

Demolition of cement concrete (un-reinforced) roofs surfaces of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240.

S&F Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete and as specified and directed.

S & F for anodised aluminium snap grid frame work for false ceiling (size of grid 605 x 605 mm) fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fastners 12.5mm dia, 40 mm long complete all as specified and directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified directed.

S&F for wooden/false ceiling surfaces of any description, not otherwise described, over 10 cm width or girth painting three coat synthetic enamel ovar one coat pink primer complete all as specified and directed.

M&L 12mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to aluminium frame work or with staples on snap grid frame work with screws and arrangement of hanging with truss complete all as specified and directed.

Taking down wooden shutter exe 1.00 sqm but and n exe 2 sqm each and refixing in same opening after curing or easing & adjusting complete all as specified and directed.

M&L for 20mm thick granite stone laid over 15mm thick cement screed bed in Cement Mortar (1:6) as in floor or kitchen slab in one piece including cutting moulding granite polishing complete all as specified and directed.

M&L for 18/19 mm thick pre-laminated particle board interior grade prelaminated one side with decorative choice lamination & other wise balancing white lamination fixed with screws to timber frame work complete all as specified and directed

S&F in repair 40mm dia cup board knobs fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.

S&F in repairs continuous piano hinges mild steel hinges bright electro galvanised width of tops 40mm (when opened) complete all as specified and directed.

S& F for magnet catches with 8mm dia steel ball and brass body and striking plate including rating in repair complete all as specified and directed.

S&F stainless steel sink with drainage board made out of 0.80mm thick sheet for kitchen with plug, washers, waste pipe incl bedding CM dwarf wall or incl fixing cast iron cantilever bracket connecting union over all size 1145 x 510mm x 200 mm with bowl size 510 x 400 x 200 mm complete all as specified and directed.

E/M Portion Taking down carefully aluminium/copper point wiring (light/ fan/ socket/ power) including fittings such as switches, socket ceiling roses, pendants, regulators etc and removing unserviceable materials from site and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and directed.

M & L for concealed type point wiring with 1.5 Sq mm (Nominal area) PVC insulated and unsheathed 1.5 sq mm cable of 1100V grade with stranded copper conductor in and including conduit with accessories along with continuous earth wire of 1.5 Sq mm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes (or existing sunk boxes) with 3.0 mm thick hylam sheet cover fixed with brass screw complete with all accessories for one light point/Fan point/call bell point controlled by one ,one way switch complete all as specified and directed.

All as per Item No 177.00 mentioned here-in- above but one 3 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed.

All as per Item No 177. 00 mentioned here-in-above but one 3 pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed.

All as per item No 177.00 mentioned here-in- before but 3 pin 15 Amps switch socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and directed.

S & F for Switch piano flush type single pole two way 6 Amp complete all as specified and directed.

S & F for Socket outlet 2 in 1, 3 pin, 5/6 Amps flush type complete all as specified and directed.

S & F for ceiling rose, surfaces Bakelite three terminals complete alas specified and directed.

S & F step regulator 230-250 volts, suitable for ceiling fan of size 1200/1400 mm sweep complete all as specified and directed.

S & F lamp holder with insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin (6 Amps) flush type controlled by one switch complete all as specified and directed.

S&F switch socket combination 2 in 1, 6 pin (16 Amps) flush type controlled by one switch complete all as specified and directed.

S&F two single core, 4 Sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) concealed, including 4 Sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

S&F in repair security light fittings 25 watts, minimum lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F in repair 18W LED light fitting wall mounted batten 4'ft, extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 18 watt, 6000K including necessary connection complete all as specified and directed.

S&F in repair bracket made out of glavanized tube 25mm dia bore (Iight grade) 1.50 meter long and Sand as required with MS clamps, nuts and bolts with two coat of red primer and one coat of silver paint complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), single pole and neutral 240 V, 8 ways with mounting fitted with bus bas, DIN channel, neutral link and incoming contact complete all as specified and directed.

S&F in repairs MCB SP, 6 to 32 Amps, 'C’ series 10kA, 240 Volts and to be housed in DBs including necessary connection complete alll as specified and directed. (Note: Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

M & L for GI tubing 25 mm bore medium grade in trenches/ floor/pillar and connection in old or news position including fitting like socket / union/ tee/ reducer/ nipple etc complete required will be supplied by contractor rate for the same is included in the item rate quoted complete all as specified and directed.

S&F in repairs MCB SPN 6 to 32 Amps, 'C’ Series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed. (Note: Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any ratinq).

S & F of 500 ltrs capacity rotational moulded polyethylene water storage tank (Cylendrical, vertical with closed top with double layer conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fitting complete all as specified and directed.

M & L for GI tubing 50 mm bore medium grade in trenches/ floor/pillar and connection in old or news position including fitting like socket / union/ tee/ reducer/ nipple etc complete required will be supplied by contractor rate for the same is included in the item rate quoted complete all as specified and directed.

Cutting existing steel tubing for alteration or additions (each out measure ) 50mm bore complete all as specified and directed.

Taking down existing unserviceable service earth continuity conductor or main earthing lead and supply and fixed 4mm dia GI earth lead with clamp, connection complete all as specified and directed.

S&F ceiling fan 1200 mm size, star 5 rated, ISl mark, 240V, 50Hz complete all as specified and directed.

S&F metal exhaust ventilation fan of sweep 300mm complete all as specified and directed.

M&L for earthing complete with galvanized mild steel earth plate electrode 600x600x6.0mm thick, buried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or riveted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40mm dia GI 'light grade' pipe from upper end of earth plate upto equipments 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, test point, GI funnel with wire mesh fixed on water pipe and PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC (1:2:4) type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part-I complete all as specified and directed and testing on completion.

S S ENTERPRISE

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

ROY ENTERPRISE

M/S DEBNATH MONDAL

NIRMAL DAS AND CO.