COMPREHENSIVE B/R REPAIRS WORK INCLUDING FLOORING, TILING, PLASTERIN, SANITARY FITTING AND OTHER CONNECTED WORK IN INCL EM WIRING IN MILITARY HOSPITAL AND MDC OF AGE B/R-I AREA UNDER GE NASIRABAD

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed by Engr-in-Charge.

M&L for brick work with flyash old size bricks, straight or curved on plan exc. 6mm mean radius, built in in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in of flooring without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in of flooring without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and directed by Engr-in-Charge.

Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 10mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed by Engr-in-Charge. (Note :- WPC measured and paid separately) .

M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall care putty, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed by Engr-in-Charge.

Dismantling Wall and ceiling boards/wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,including dismantling of old boards/ ciling etc complete at all heights as per direction of Engineer-in-charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed by Engr-in-Charge.

S&F solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC framecomplete all as specified and directed by Engr-in-Charge.

M&L cutting holes in stone walls built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 type B-1 as required area exc one brick but not exc two bricks complete all as specified and directed by Engr-in-Charge.

S & F rolled mild steel as in angle setion, fixed indepenntly with or without connecting plates or welding with existing steel or iron surfaces etc and similar work confirming to Gde E-165 (Fe 290) including necessary cutting, welding etc and fixing in position complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling, unframed work under 40 sqcm in section complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L 18-20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for chequered cement concrete/Endura tiles 30 x 30 cm x 10-12 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 complete all as specified and directed by Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge.

M&L for machine cut Kota stone slab flooring 18-20 mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed by Engr-in-Charge.

M&L only on old surfaces mirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified and directed by Engr-in-Charge.

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed by Engr-in-Charge.

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engr-in-Charge.

S&F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed by Engr-in-Charge.

S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe (excluding flushing cistern) antisyphonage pipe, including making good floor , etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and directed by Engr-in-Charge.

Taking down existing PVC low level flushing cistern including bend, flush pipes etc and M&L for providing 10 Ltrs capacity PVC low level flushing cistern including chromium plated brass inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length incl making necessary connections to water supply pipe line jointing to WC complete all as specified and directed by Engr-in-Charge.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engr-in-Charge.

Refixing shutters of any description n exc 1 sqm each in same opening incl. taking down complete all as specified and directed by Engr-in-Charge.

Refixing shutters of any description exc 1.0 Sqm but n. exc 2 Sqm each in same opening incl. taking down complete all as specified and directed by Engr-in-Charge.

M&L for aluminium powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminium door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified and directed by Engr-in-Charge and as per Chief Engineer Drg No CBZ/TD/05/2011.

M&L for aluminium powder coated sliding window, ventilator three track including aluminium powder coated decorated grill sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side complete all as specified and directed by Engr-in-Charge. and as per Chief Engineer Drg No- CBZ/TD/15/2011.

M&L for aluminium sliding window, ventilator three track including aluminium powder coated decorated grill sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side complete all as specified and directed by Engr-in-Charge. and as per Chief Engineer Drg No CBZ/TD/15/2011

Taking down chowkats with shutter (without taking off shutter from the frame) exc. 1.5 sqm & n. exc 4 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.

S&F door closure hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width of aluminium body (die cast) weight between 61 to 80 kg in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair 12mm thick toughened glass for door of any size and side portions of toughened glass fixed to wall/dloor, joints sealed with clear silicon silicate get to make water tight, incl necessary cleats edges with diamond cut including taper drilling to flush the screws/all fittings as required, floor hinges, patch fitting top, bottom and sides, lock and handles, including fixing of floor spring/floor machine spider joint etc, all as specified, required at site by manufacturer instruction ans as directed by Engr-in-charge.

Dismantling AC/corrugated/semi-corrugated Sheet roofing tiles with ceiling tiles or slate roofing complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws fixed with L & J hooks and washers, in roofs, walls etc with grade of zink coating 275 all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

M&L preparation of old plastered surface of wall and applying two coat of acrylic emulsion paint over coat of 1mm thick average thick wall putty, complete all as specified and directed by Engr-in-Charge. by Engr-in-Charge.

Dismantling timber scantlings unframed 40 sqcm and over in section, in any position complete all as specified and directed by Engr-in-Charge.

S&F steel work in tubular trusses, purlins, rafter including special shaped washer etc, complete using ERW or induction butt welded tubes complete all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed by Engr-in-Charge.

Taking down carefully by unscrewing from boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store ( To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following.

All as per Item No 67.00 above but One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 67.00 above but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 67.00 above but One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 67.00 above but One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 67.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including PVC casing & caping with all PVC casing caping accessories and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following.

All as per Item No 69.00 above but One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 69.00 above but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 69.00 above but One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 69.00 above but One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per Item No 69.00 above but with 2.5 Sqmm single core multistranded unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed:

All as per Item No 71.00 above but One light point/bell point controlled by one way 5 Amps single pole switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 71.00 above but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 71.00 above but One 5 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 71.00 above but One 5 Pin 5 Amps socket outlet on independent board with other switch complete all as specified and directed by Engr-in-Charge.

All as per Item No 71.00 above but One light point controlled by two, 2-way switches complete all as specified and directed by Engr-in-Charge.

All as per Item No 71.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

S&F of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed by Engr-in-Charge.

S&F of switch piano flush type, 5 Amp , 240 volt , single pole, two way switch, complete all as specified and directed by Engr-in-Charge.

S&F of switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed by Engr-in-Charge.

S&F of switch bell push, flush type, 5 Amp, complete all as specified and directed by Engr-in-Charge.

S&F of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed by Engr-in-Charge.

S&F of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all, as specified & directed.

Supply and fixing stepped type ( switch type) electronic ceiling fan regulator flush type, AC, 230 volts , complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed.

S&F of modular bell push, 6 Amp, 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S&F of mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed by Engr-in-Charge.

S&F of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed by Engr-in-Charge.

S&F of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed by Engr-in-Charge.

S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed by Engr-in-Charge.

Fixing only boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store ( To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed by Engr-in-Charge.

M/S SHIVA TRADERS (BID ID -3065914)

Shree Sai Ram Enterprises (BID ID -3064311)

TANISHQ ENTERPRISES (BID ID -3066236)

ASHISH SHARMA (BID ID -3066701)

V K LAKWAL CONSTRUCTION (BID ID -3066444)

M/s AKASH CONSTRUCTION CO. (BID ID -3073988)