Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC H NO 257 1ST FLOOR KAMALA NEHRU NAGAR BATHINDA PB | BATHINDA | BATHINDA | PUNJAB | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.5 L+₹2.8 L (22.4%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹17.4 L+₹4.7 L (37.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) Bhisiana
GE(AF) Bhisiana
As per BOQ/ Price Schedule
2023_MES_621813_1
GE/BHI/T-34/2023-24
Open Tender
Civil Works
Item Rate
150 days
GE(AF) Bhisiana
As per NIT/ Tender documents
6 documents required · 6 mandatory
₹500
GE(AF) Bhisiana
₹30,000
18 Dec 2023
6 Oct 2023
8 Nov 2023
6 Oct 2023
4 Nov 2023
20 Oct 2023
6 Oct 2023 - 16 Oct 2023
Amount
Taking down rolling shutter, hood cover and guide channels etc complete width of rolling shutter upto 3metre, incl complete servicing, greasing, oiling and strengthening of guide channels and refixing all arrangements in proper alignments for smooth functioning, complete all as specified and directed by Engineer in Charge.
S&F Mild steel plain sheet 0.63mm thick, cut to size , made to shape of hood cover of rolling shutters , fixed in position as in repairs incl painting two coats with snthetic enamel paint over a coat of red oxide primer, fixed as in repairs, complete all as specified and directed by Engineer in Charge.
S&F as in replacement ball bearing of No 6202 suitable size for making the steel rolling shutters operational complete all as specified and directed by Engineer-in-Charge
S&F as in replacement safety lever locks, mild steel with 4 lavers for rolling shutters of standard quality as approved by GE complete all as directed by Engineer-in-Charge.
Taking down existing unserviceable tension spring of rolling shutter and provision of new tension spring of approved quality, fixed as in repairs, complete all as specified and directed by Engineer in Charge.
Taking down steel rolling shutters, any type with two ball bearings as specified including top cover, anchor rod etc complete all directed by Engineer-in-Charge.
S&F Steel rolling shutters, manual operated type with ball bearings, complete all as specified in SSR Part-I, including tope cover, anchorintg rod, hasp & staple and one shop coat of primer; erected in position (thickness of sheet/ lathes 1 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, complete all as specified. Note: (i) Quoted rate includes making good the disturbed surfaces as per existing finished specifications. (ii) Quoted rate includes necessary use and waste of form work, if required.
S&F in repair Collapsible steel gates, top hung, consisting of channels pickets, pivoted flat bars, top and bottom runners, brass handles etc erected in postion and securing runners with holdfasts and brackets including taking down collapsible steel gate of any description, complete all as specified and directed. Note : The rate quoted shall incl for provision of suitable size of bed blocks in PCC 1:2:4 type B1 for securing of runners hold fasts.
Dismantiling of mild steel work of any description not other wise provided for completed all as directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165.all as specified and as directed by Engr-in-Charge.
M&L for Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide paint exposed to view surfaces complete all as specified and directed by Engineer in Charge.
Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed by Eng-in-Charge
Taking down chowkhats or frames exc 1.5 sqm but not exc 4 Sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as specified and directed by Engineer in Charge.
Taking down shutters of any description exc 1sqm and n exc 2 sqm each acomplete all as specified and directed by Engineer in Charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm (double rebate ) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including PCC Type B1 1:2:4 (using 20 mm graded granite stone aggregate) for repair of hold fasts and similar works as per specified drawings as directed by the Engr-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified and directed by Engineer in Charge.
All as per Item no 15 but of frame size 65 x 100mm (single rebate)
All as per Item no 15 but of frame size 45 x 70mm (single rebate)
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed by Engineer in Charge.
S&F factory made Single Extruded WPC (wood polymer composite) solid plain flush door shutter of size 35mm th comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and Natural Fibers (Wood Powder /Rice Husk / Wheat Husk) and Non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N1100 (Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screws, complete all as specified and directed by Engr-in-Charge. (Note : stainless steel butt hinges and necessary s s screws shall be paid separately.
S&F factory made Single Extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 35mm th comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and Natural Fibers (Wood Powder /Rice Husk / Wheat Husk) and Non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N1100 (Edge), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design posted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screws, complete all as specified and directed by Engr-in-Charge. (Note : stainless steel butt hinges and necessary s s screws shall be paid separately.
S&F Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing and directed by Engr-in-Charge.
Supply and fixing glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing including S&F Stainles wire cloth of dia 1.14mm and avg aperture width 0.36mm and Rate tail type spring 200mm complete all as specified and directed by Engineer in Charge..
S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed by Engineer in Charge.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats complete all as specified and directed by Engineer in Charge.
M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed by Engineer in Charge.
S&F galvanised stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed by Engineer in Charge.
S&F Butt hinges100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer in Charge.
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed by Engineer in Charge.
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed by Engineer in Charge.
S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer in Charge.
S&F Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue, anodised,with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer in Charge.
S&F of powder coated anodised alluminium frame for doors, windows, ventilators with one or more rebates including Aluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge.
S&F of powder coated anodised aluminium door shutters, alluminium sections weighing .55 kg/M including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 Nos in each door , 3 Nos hinges, 2 Nos tower bolts, anodised aluminium snap beading screws etc, complete all as specified and directed by Engineer in Charge.
S&F in repairs aluminium powder coated window/door grills , mesh size 50mm x50mm thickness 3.8mm complete all as specified and directed by Engineer in Charge.
M&L for Powder coated Aluminium windows of three tracks outer frame top, side sections, bottom frame(track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh(total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4 mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specified and directed by Engineer in Charge.
S&F anodised aluminium window and ventilator shutters, side hung type with out sash bars, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) with powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed by Engineer in Charge.
S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
M&L 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in cup board shutters, partitions, shelves etc. complete all as specified and directed by Engineer in Charge.
S&F 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter (supplied alongwith shutter) exc 0.50 sqm each complete all as specified and directed by Engineer in charge.
S&F solar control film 25 micron reflective type (gareware sun control or equivalent) all as specified and directed by Engineer-in-charge.
S&F in repairs mortice lock verticle type size 100 mm, 4 levers for Aluminium doors of MS complete with handle as per sample kept in GE office complete all as directed and specified by Engineer in Charge.
Taking down and refixing aluminium joinery area exc 1 Sqm n exc 3 sqm after making serviceable including removing of rubber seal, beadings and fixing new rubber beading & aluminium beading and replacing unserviceable part e.g. glass pane , floor door stopper, floor spring, door closer, pivot hinges etc glass pane floor door stopper , door closure, door spring & pivot hinges should be measured and paid separately
S&F in repairs Floor door stopper 140mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring fixed in floor complete all as specified and as directed.
S&F in repair pivot hinges suitable for aluminium door shutters, complete all as specified and directed.
S&F 12mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc., fixed as in repairs, complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, fixed as in repairs, complete all as specified and as directed.
S&F 4 mm thick frosted glass panes, fixed with necessary glazing clips, in squares exceeding 0.5 Sqm in each pane, fixed as in repairs, complete all as specified and directed.
S&F in repair double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass and other parts made of heavy duty mild steel, complete all as specified and as directed.
S&F in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified.
S&F 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixes as in repairs , complete all as specified and directed.
S&F in repairs 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed.
S&F in repairs 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed.
S&F in repairs 150 mm long Aluminium handles, cast type, anodised, complete all as specified and directed.
S&F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F in repairs 100 mm long Aluminium handles, cast type, anodised, complete all as specified and directed.
S&F in repairs 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, fixed as in repairs complete all as specified and directed.
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, fixed as in repairs complete all as specified and directed.
S&F Mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate, fixed as in repairs, complete all as specified and directed.
S&F 125mm aluminium anodised Hasp and staple, safety type fixed with screws, fixed as in repairs complete all as specified and as directed
Sliding locks suitable for sliding window shutters, fixed as in repairs, complete all as specified and directed.
Easing & adjusting of Shutters of any description exc 1 sq. m and n exc 2sqm each door/windows/cup board shutters of any description for easy closing/opening tightening of hinges of changing the position of hinges adjustment of tower bolts, sliding bolts complete all as specified and as directed by Engineer-in-Charge.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete.
S&F as in repairs galvanised stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tack or galvanised wire staple complete.
Welding in repairs n. exc 2.5cm in length, thickness of metal to be welded not exceeding 6 mm. Complete all as specified and directed.
S&F in repairs Harrison rails mild steel, chromium plated alloy with fixing brackets, stops, roller etc complete all as specified and directed by Engineer in Charge.
Mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers as in repair complete all as specified and directed.
Dismantiling boarding of any description including hardware fittings, fixed in any position with nails etc completed all as directed.
S&F 18mm thick PVC ply of plain colour fixed with screws, solvent cement / adhesive to make cabinet and bottom and shelves inside the cabinets complete as per specified and as directed by Engr-in-Charge.
S&F 18mm thick PVC ply of one side prelam/rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete as per specified and as directed by Engr-in-Charge.
S&F 5mm thick PVC ply of plain white colour fixed with screws, solvent cement / adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specified and as directed by Engr-in-Charge.
S&F 20mm wide & 1mm thick PVC edge bedding of PVC pested on edges with suitable adhesive, complete as per specified and as directed by Engr-in-Charge.
S&F of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed by Engineer in Charge.
S&F of ball bearing runners 45mm telescopic channel (20 inch) full extention load capacity 50 kgs complete all as specified and directed by Engineer in Charge.
S&F of stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed by Engineer in Charge.
S&F of continous piano hinges stainless steel , bright finish width of flaps when open 40mm complete as per specified and as directed by Engr-in-Charge.
S&F 150mm hasp and staple safety type aluminium powder coated with mild steel pin including bolt to hinge plate and fix with screws complete as per specified and as directed by Engr-in-Charge.
S&F Magnetic catcher for cupboards complete as per specified and as directed by Engr-in-Charge.
S&F 10 mm thick and 40mm width flexible rubber beading fixed with suitable stainless steel screw alongwith washer at bottom of any type of door shutter as door-seal complete as per specified and as directed by Engr-in-Charge.
Taking down cement of cement lime plaster on brick or concrete surfaces, static water tanks etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engr-in-charge.
M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and as directed by Engr-in-charge.
M&L for 15 mm thick, cement plaster in CM (1:6) on fair faces of brick or concrete on wall surfaces and finishing the surface even and smooth (without using extra cement) etc,complete all as specified as directed by Engr-in-charge
M&L for preparation of new plastered surface of walls and apply two coats of oil bound distemper over a coat of alkali resistant Primer paint complete all as specified and directed by Engineer in Charge.
M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer in Charge.
RAKESH KUMAR GARG & CO.
M/s Manav Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .