SPL REPAIR TO ROOF TREATMENT AND ALLIED WORKS OF BLDG. NO P-84 (MAIN BLOCK) OF HQ CENTRAL COMMAND AND PROVN OF HARD STANDING IN FRONT OF BLDG. NO 154E OF 9 KUMAON UNDER GE (EAST) LUCKNOW

Amount

Demolition of brick work built in cement mortar including all of quoins, arches, pillars etc but excluding ashlar facings and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks staright or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls / ceiling including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 with liquid WPC on brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. Note: Liquid WPC shall be measured and paid seperately as 'Supply only'.

M&L for rendering 10 mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on concrete surface of ceiling, finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. →

M&L for applying two coats of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of required shade and colour as per manufacturer's specification on new surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats white wash on ceiling surfaces complete all as specified and directed.

Dismantling bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons,roof top etc (each layer) laid dry and pointed complete all as specified and directed.

Demolition of mudphuska/cement concrete/cement mortar including existing tarfelt etc of any thickness including, cleaning, washing down etc complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Removing building materials / wastage material retrieved from demolition/dismantling upto distance not exc 1.00 km including loading, unloading and stacking/spreading at the destination complete all as specified and directed .

M&L for roughening surfaces of old concrete/brick floor by picking, sweeping clean and washing down with water to remove dust etc. brushing neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding of roof slab, coping, benching and to maintain slope of roof top, complete all as specified and directed.

S&F galvanised iron (low carbon) chicken wiremesh of mesh size 25 mm and dia of 0.8 mm hexagonal wire netting conforming to IS-3150 (1985) for PCC padding work and sandwitched between two layers of PCC on roof top complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of concrete surfaces/roof top and parapet wall in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note: Liquid WPC shall be measured and paid seperately as 'Supply only'.

M&L for high performance hybrid polyurea polyurethane waterproofing coating cold applied of spray/brush and applying smartcare ultron or approved equivalent liquid membrane at 1.5 Kg/Sqm with an elongation of 500% + 50% and tensile strength of 11-13 N/sqmm as per ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C1305, shore a hardness of min 75 as per ASNZ 4546 . The system includes final base preparation as per site requirement, epoxy primer (mixed with resin and hardener ) not be less than 80 gm/sqm as per manufacturer direction )application @150 gm/sqm in single coat and applying smartcare Ultron or approved equivalent in two coats at a coverage of 1 Kg/Sqm each coat after gainig the moisture content of primer less than 4% complete as per manufacturer's specification including cleaning of the surface complete all as specified and as directed. Note:- 2nd coat of smartcare ultron or equivalent product approved by GE ,shall be laid after 6 hours to over night of 1st coat .

Taking down 15 mm dia GI tubing and connections and removal from site complete all as specified and as directed.

M&L for cutting chases not exc 10cm in girth for concealed water tubing and making good to disturbed surfaces in CM 1:3 complete all as specified and directed.

S&F 15 mm bore steel tube, medium grade, galvanised with all fittings such as bends, elbows, tee etc and fixed to walls and ceiling complete all as specified and directed.

Taking down 20 mm dia GI tubing and connections and removal from site complete all as specified and as directed.

S&F 20 mm bore steel tube, medium grade, galvanised with all fittings such as bends, elbows, tee etc and fixed to walls and ceiling complete all as specified and directed.

Dismantling of water storage tanks exc 500 Ltr but not exc 1000 Ltr capacity and removing from site complete all as specified and directed.

S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part–I and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt -210gms) complete all as specified and directed .

S&F 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Disconnecting of PVC water tanks of capacity exc 500 ltr but not exc 1000 ltr and refixing the same after necessary cleaning and reapir complete all as specified and directed.

Taking down rain water pipes ( any type, any size or pattern) including all fittings , shoes, bends, swan neck etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall , complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall , complete all as specified and directed.

S&F 150mm PVC (SWR) bends any radius complete all as specified and directed.

S&F mild steel stack clamps made out of 50mm by 5mm flat iron round iron stays, including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Removal of surplus soil not exc 50 m and deposting where directed at level not exc 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core of broken stone or boulder of gauge not exc 63 mm, deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 100 mm plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base of floor or paving , path etc complete all as specified and directed.

Material and labour for sand cushioning in layer under floor including watering and consolidation complete all as specified and directed

Material and labour for 80 mm thick machine pressed precast interlocking paver block of grade M-40 of yellow and red glossy colour of any size and shape finished with pigment confirming to IS 15658-2006 complete all as specified and directed.

M/S KAUSHIK CONSTRUCTION

sweety pest control

QUALITY CONSTRUCTIONS CO