REPAIR/ MAINTENANCE OF WATER SUPPLY, FIRE

Amount

Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately

Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge

Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge

Taking up cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge

All as per above item No 4 here-in-before but 150mm bore

All as per above item No 4 here-in-before but 200mm bore

All as per above item No 4 here-in-before but 250mm bore

M&L for Cutting to cast iron pipes of 80mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge

All as per above item No 8 here-in-before but 100mm bore

All as per above item No 8 here-in-before but 150mm bore

All as per above item No 8 here-in-before but 200mm bore

All as per above item No 8 here-in-before but 250mm bore

Supply and laying cast iron pipes of 100mm bore with spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge

All as per above item No 13 here-in-before but 150mm bore

All as per above item No 13 here-in-before but 200mm bore

All as per above item No 13 here-in-before but 250mm bore

Supply and fixing and testing of CI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by engr in charge.NOTE: Excavation earth working any type of soil/Rock and run lead joints tighten joints rubber gasket shall be measured and paid seperately.

All as per above item No 17 here-in-before but 200 to 300mm bore

Supply and fixing in replacement of unserviceable sluice valve cast iron with brass spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 250mm bore pipe as in repairs and ISI marked complete all as specified and as directed.

All as per above item No 19 here-in-before but 200mm bore

All as per above item No 19 here-in-before but 150mm bore

All as per above item No 19 here-in-before but 100mm bore

All as per above item No 19 here-in-before but 80mm bore

Supply and fixing in replacement of unserviceable jointing to cast iron pipe of size 250mm bore spigot and socket by run lead joints including spun yarn and chalking of lead joints complete all as specified and as directed by Engineer-in-charge

All as per above item No 24 here-in-before but 200mm bore

All as per above item No 24 here-in-before but 150mm bore

All as per above item No 24 here-in-before but 100mm bore

All as per above item No 24 here-in-before but 80mm bore

Taking out existing GI pipe 80mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge

All as per above item No 29 here-in-before but size 50mm bore

All as per above item No 29 here-in-before but size 32/40mm bore

All as per above item No 29 here-in-before but size 25mm bore

All as per above item No 29 here-in-before but size 20mm bore

All as per above item No 29 here-in-before but size 15mm bore

Supply and fixing GI tubing medium grade 80mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge.

All as per above item No 35 here-in-before but size 50mm dia bore

All as per above item No 35 here-in-before but size 32/40mm dia bore

All as per above item No 35 here-in-before but size 25mm dia bore

All as per above item No 35 here-in-before but size 20mm dia bore

All as per above item No 35 here-in-before but size 15mm dia bore

Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge

All as per above item No 41 here-in-before but size 80 to 100 mm dia bore

Supply and fixing in replacement of unserviceable gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge.

All as per above item No 43 here-in-before but size 32 /40mm dia bore

All as per above item No 43 here-in-before but size 25mm dia bore

All as per above item No 43 here-in-before but size 20mm dia bore

All as per above item No 43 here-in-before but size 15mm dia bore

Supply and fixing in replacement of unserviceable PVC bib cock 15mm dia

Supply and fixing in replacement of unserviceable PVC PTMT float valve 20/25 mm dia complete with PVC ball and connecting rod

Supply and fixing in replacement cast iron non return valve flanged end conforming to IS 5312 of size 80mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge.

All as per above item No 50 here-in-before but 100mm dia

All as per above item No 50 here-in-before but 150mm dia

All as per above item No 50 here-in-before but 200mm dia

Supply & Fixing In Replacement Of Water Meter 200mm Bore Including Rubber Packing Sheets, Nuts, Bolts Etc Complete All As Specified And Directed

Supply & Fixing In Replacement Of Water Meter 150mm Bore Including Rubber Packing Sheets, Nuts, Bolts Etc Complete All As Specified And Directed

M&L for Brick work with sub-class 'B' bricks straight on plan built in CM 1:4 for pipe line supports complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate built in CM for copping pipe liner support complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 type B-2 using 40mm graded aggregate built in cement mortar as in foundation/mass concreting complete all as specified and directed by Engr-in-charge.

M&L for plastering work 15mm thick on fair faces of brick work on concrete surfaces in 1:4 cement mortar for pillar supports

Making good for road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc all as specified and as directed by Engineer-in-charge

M & L for Design, development, supply commissioning & testing EHCC certified ground tubular effective Tripot type chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anticorrosive long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 25mm x 3mtr long copper rod as primary conductor and hollow pure Copper tube of dia 50mm x 3mtrs long as secondary conductor to install with suitable connection terminal coforming of IS 3043: 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 02 Bags / 60 Kgs minimum or sufficient quantities required as per site complete including FRP earthing pit clause suitable cover, material and labour including 32x6mm earthing strip 10mtr length and testing after completipon and result should be less than one Ohm complete, all as specified and as directed by Engineer-in Charge. Note:- Excavation for earthing in any surface hard/rock/soft soil for required length by using rock driller machine/other eqpt is inclusive in quoted rate and necessary earthing pit 60x60x6cm also inclusive in quoted rate.

M&L for earth continuity conductor of size 32x6 mm galvanised strip strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge

M&L for Construction of brick masonary valve pit of size 100cmx100cmx100cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3.15mm thick including frame of angle iron 40x40x6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in CM 1:6 15mm thick plastering in CM 1:4 (internal & external) and necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to a distance not exe 50 mtrs 150mm thick PCC 1:4:8 type D-2 for base and PCC copying 15mm thick 1:2:4 using 12mm graded aggregate all as specified and as directed by Engineer-in-charge) for upto 250mm dia valve)

Supply & fixing in replacement of 100mm foot valve complete all as specified and as directed by Engineer-in-charge.

Supply & fixing CI air release valve of dia 150mm bore dia complete with all accssories incl taking down old unsv air release valve all as specified and directed by engr in charge.

Dismantling & taking out open well submersible pump sets installed at water storage tank of fountains, pumphouse and booster pump sumps of capacity 2 to 15 HP after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note : - Repairs carried out / parts replaced shall be paid seperately under relevent items

M&L for transportation of open well centrifugal type submersible pump set of capacity 10.0 HP to 15 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete ( other spares required for motor will be measured and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

M&L for transportation of open well centrifugal type submersible pump set of capacity 5 HP to 7.5 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete( other spares required for motor will be measured and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

M&L for transportation of open well centrifugal type submersible pump set of capacity 2.0 to 4.0 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring complete( other spares required for motor will be measured and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

S&F in replacement of SS coupling for 5 HP to 7.5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge

S&F in replacement of gland suitable for 5 HP to 7.5 HP submersible pump

S&F in replacement of casing ring suitable for 5 HP to 7.5 HP

S&F in replacement of shaft sleevesof existing material for 5 HP to 7.5 HP

S&F in replacement of wear ring suitable for capacity 5 HP to 7.5 HP

S&F in replacement of mechanical seal suitable for 5 HP to 7.5 HP

S&F in replacement of gaskets suitable for 5 HP to 7.5 HP

S&F in replacement of impeller for existing material suitable for 5 HP to 7.5 HP

S&F in replacement of SS coupling up to 10 HP to 15 HP submersible pump set complete all as specified and as directed by Engineer-in-charge

S&F in replacement of gland suitable for 10 HP to 15 HP submersible pump

S&F in replacement of casing ring suitable for 10 HP to 15 HP

S&F in replacement of shaft sleevesof existing material for 10 HP to 15 HP

S&F in replacement of wear ring suitable for capacity 10 HP to 15 HP

S&F in replacement of mechanical seal suitable for 10 HP to 15 HP

S&F in replacement of gaskets suitable for 10 HP to 15 HP

S&F in replacement of impeller of existing material suitable for 10 HP to 15 HP

S&F in replacement of SS coupling suitable for 2 HP to 4.0 HP submersible pump set complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of gland suitable for 2 HP to 4 HP submersible pump

S&F in replacement of casing ring suitable for 2 HP to 4 HP

S&F in replacement of shaft sleeves of existing material for 2 HP to 4 HP

S&F in replacement of wear ring suitable for capacity 2 HP to 4 HP

S&F in replacement of mechanical seal suitable for 2 HP to 4 HP

S&F in replacement of gaskets suitable for 2 HP to 4 HP

S&F in replacement of impeller of existing material suitable for 2 HP to 4 HP

S&F in replacement gun metal bush bearing of any number/Model suitable for 5 HP to 15 HP open well submersible pump

S&F in replacement gun metal bush bearing of any number/Model suitable for 2 TO 4 HP open well submersible pump

Dismantling of water fountain ring made out of MS / GI pipe of 40 to 80mm dia and refixing the same in its original position after cleaning / repairing like welding work etc complete all as specified and directed by Engineer-in-charge

Dismantling of Blocked nozzles fixed on various fountain and refixing after cleaning / servicing and setting by trial and error complete all as specified and as directed by Engineer-in-charge

S&F in replacement fountain nozzle (adjustable) of size 12mm brass Model FNCF-12B complete

S&F in replacement fountain nozzle (adjustable) of size 15mm brass

S&F in replacement fountain nozzle (adjustable) of size 20mm brass

S&F in replacement fountain nozzle (adjustable) of size 25mm brass

S&F in replacement dandelion fountain nozzle (adjustable) brass as per existing size and model

S&F in replacement of Porcelain 2 pin holder complete

Dismantling of 12mm dandelion aluminium tubes and nozzles etc cleaning of tubes & nozzles and necessary repairs in the tubes / nozzles by carrying to civil workshop and refixing and setting by trial and error complete all as specified and as directed by Engineer-in-charge

S&F in replacement of Rubber packing ring suitable for under water light fittings complete all as specified and as directed by Engineer-in-charge

Supply & fixing in replacement wire netting of stainless steel wire 1.4mm dia size of mesh 12mm fixed to bend pipe dia 100mm to 200mm fixed with GI clamp including nuts and bolts etc complete all as specified and directed by Engineer-in-charge

S&F in replacement of constant voltage driver of capacity 10 amps 12 Volt complete all as specified and as directed by Engineer-in-charge

S&F in replacement of constant voltage driver of capacity 15 amps 24 Volt complete all as specified and as directed by Engineer-in-charge

M&L in replacement water proof joints for cable size 2.5/4/6 sqmm complete all as specified and as directed by Engineer-in-charge

S&F in replacement of angle adjustable stand for luminaries made of SS-304 materials as per Sample for fountains.

S&F in replacement of Fountain light fitting 12 V 100 watts suitable for existing make.

S&F in Replacement fountain light fitting 24 volt LED type 3 watt model F 21 of make Fountainer (any colour)

S&F in Replacement fountain light fitting 24 volt multicolour 3W (7 colours) as per existing make & model

Scrapping of old painting from complete fountain assembly made of MS / GI / Steel pipe and applying two coats of approved synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Dismantling of pressure pump set of Cap 0.5 HP to 1.0 HP from the existing site after disconnecting all electrical connections and refixing the same after carrying out repairs / rewinding of motor / overhauling of pump including transportation to local work shop & back complete all as specified and as directed by Engineer-in-charge. Note : - Spare parts replaced shall be paid seperately under relevant items

S&F in replacement of Air Tank for pressure pump set of capacity 0.5 HP to 1.0 HP

S&F in replacement of Pressure gauge 0-10 Kg / SqCM

S&F pressure control switch suitable for 0.5 HP pressure pump set

S&F in replacement gun metal non return valve of size 15mm bore

S&F in replacement gun metal non return valve of size 20mm bore complete all as specified and directed by Engr-in-charge.

S&F in replacement gun metal non return valve of size 25mm bore complete all as specified and directed by Engr-in-charge.

S&F in replacement gun metal non return valve of size 40mm bore complete all as specified and directed by Engr-in-charge.

S&F in replacement gun metal non return valve of size 50mm bore complete all as specified and directed by Engr-in-charge.

M&L for rewinding of Booster Pump set motor of capacity 2 HP to 3 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

M&L for rewinding of Booster Pump set motor of capacity 4 HP to 5 HP with same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

Dismantling & taking out defective parts of booster pump set of capacity 0.5 HP to 1.5 HP and refixed after repairs / making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : - Parts replaced if any shall be paid under relevent items of the schedule

M&L for rewinding of Booster Pump set of capacity 0.5 Hp to 1.5 HPwith same gauge of super enamelled copper winding wire after cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge

S&F in replacement old Running Capacitor 10.0 MFD

S&F in replacement Running Capacitor 25.0 MFD

S&F in replacement Running Capacitor 36.0 MFD

S&F in replacement Running Capacitor 50.0 MFD

S&F in replacement Running Capacitor 72.0 MFD

S&F in replacement Running Capacitor 125.0 MFD

S&F in replacement of ball bearing for 0.5 HP to 1.5 HP

S&F In Replacement CI Impeller Assy of Centrifugal mono block Pump set of capacity 0.5 HP to 1.5 HP as per sample (size varies depend upon the make and cap)

Supply and fix in replacement Decrin dozing pump Model No 96NG Q 51 , 100 PSI 40 GPD Capacity of make DECLIBAC or equivalent.

Supply and fix in replacement FRP TANK of Capacity 100 LTR with level gauge with agitator Motor ,connection shaft and mixing blade complete

Supply and fix in replacement Electric motor Single phase 50 HZ 1/8 HP assy Suitable to mount on decrin mixing tank along with agitator shaft and blade complete.

Supply and fix in replacement connection pipe suitable for connecting to decrin dosing pump to Header( 2 Mtr long 8 mm internal dia)

Supply and fix in replacement of circuit of speed of Dozing pump

Supply and fix in replacement of injector Nozzle of Decrin dozing pump

Supply and fix in replacement of Regulator Knob of dozing pump

Supply and fix in replacement of power cord of dozing pump 2 mtr long plug top 5 AMP 240 volt AC

Supply and fix in replacement of PVC pipe 25mm dia

S&F in replacement of Phase sequence corrector suitable for 5 HP to 7.5 HP pump complete complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of Phase sequence corrector suitable for 10 HP to 15 HP pump complete complete all as specified and as directed by Engineer-in-charge.

M&L for cleaning / maintenance of fountain, water body complete with cleaning solutions removing all the sludge /foreign particles all as specified and as directed by Engineer-in-charge

S&F in replacement of DOL starter for 5 HP to 7.5 HP with relay 13-22 Amp complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement electronic timer ET-100 240/415 complete all as specified and as directed by Engineer-in-charge.

Supply and fix in replacement amp meter 96 Sqmm digital type 0-100 amps .

Supply and fix in replacement volt meter 0-500 volts 96 sqmm digital type .

S&F in replacement of dial type FM-1 / QT daily timer one day 24 hrs 240 volt AC

S&F in repair CT 30/5 to 200/5 Make:- AE/EE/Nutronics(DPS)

S&F in repair indicating light with bulb set of three

S&F in repair PVC copper stranded conductor cable size 1.5 Sqmm multi stranded single core 1100 volt grade

S&F in repair PVC copper stranded conductor cable size 2.5 Sqmm multi stranded single core 1100 volt grade

S&F in repair PVC copper stranded conductor cable size 4 Sqmm multi stranded single core 1100 volt grade

S&F in repair PVC copper stranded conductor cable size 6 Sqmm multi stranded single core 1100 volt grade

S&F in repair PVC copper stranded conductor cable size 10 Sqmm multi stranded single core 1100 volt grade

S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade

S&F in repair PVC flat sheathed submersible cable copper conductor of size 2.5 sqmm 3 core,1100 volt grade

S&F in repair PVC flat sheathed submersible cable copper conductor of size 4.0 sqmm 3 core,1100 volt grade

S&F in repair PVC flat sheathed submersible cable copper conductor of size 6.0 sqmm 3 core,1100 volt grade.

S&F in repair PVC flat sheathed submersible cable copper conductor of size 10.0 sqmm 3 core,1100 volt grade.

Disconnecting and removing unserviceable under ground cable 1100 volts grade from trenches / poles / walls / floors etc of size 50 sqmm 3.5 core

All as per Item No 165 above but of size 185 sqmm 3.5 core

Supplying, spreading and compacting approved river sand intrenches for cable cushioning at bottom and top of cable all as specified and as directed by Engineer-in-charge

Supply & lay burnt bricks sub class 'B' of old size laid dry in trenches as protection to cable all as specified and directed by Engineer-in-charge

Supply laying & jointing of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 50 sqmm 3.5 core

Supply laying & jointing of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 185 sqmm 3.5 core

Supply & laying GI pipe light grade 50mm dia on poles / on walls / floor etc including S&F MS clamps made of 40mmx3mm iron strip

S&F single phase preventor type VSP-D2 415 volts AC complete all as specified and directed by Engr-in-charge.

Dismantling & taking out defective part of centrifugal pump set coupled with 25 HP to 50 HP motor and refixed after making it complete serviceable by repairing/replacement complete all as specified and as directed by Engineer-in-charge.Note :- Parts to be replaced under this item shall be paid as supply only under respective items

Supply only shaft of existing material suitable for 25 to 50 HP motor

Supply only impeller of existing material suitable for 25 to 50 HP motor

Supply only shaft sleeve of existing material suitable for 25 to 50 HP

Supply only Drive end Bearing No 6313

Supply only Cast iron bearing housing for 25 to 50 HP motor

Supply only Gland assembly suitable for 25 to 50 HP motor

Supply only throat bush suitable for 25 to 50 HP motor

Supply only mechanical seal suitable for 25 to 50 HP motor

Supply only rotor body suitable for 25 to 50 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 25 to 50 HP pump set

Supply only ball bearing of suitable size for 25 to 50 HP Pump set as per existing model complete all as specified and directed by Engineer-in-Charge.

Supply only roller ball bearing of size 21309 complete all as specified and directed by Engineer-in-Charge.

S&F cooling fan for 40 to 50 HP induction motor of any make and type as approved by GE.

S&F cooling fan for 25 to 30 HP induction motor of any make and type as approved by GE.

Disconnecting & dismantling of pump set from the foundation breaking the existing defective PCC foundation in any size, shape M&L for PCC 1:2:4 type B-2 using 12.5 mm graded aggregate for foundation of any size of motor pump set from 50 HP to 75 HP capacity pump set and fitting pumping set in position with base frame painted with synthetic enamel black paint complete all as specified and as directed by Engineer-in-charge

Supply only Water based chlorine (liquid) calcium hypo chloride grade-I as per IS-11673/86 with comprissing the following specifications :- (a) Clear liquid with straw yellow colour (b) Minimum PH Value range 6 to 8 (c) Freezing point 1-4 degree F (d) Fresh alkaline Na2 Co3 GPL (min) (e) Date of packing & expiry date mentioned on packing Jar / Cane (f) 90% GPL (g) Packing in 40 litre PVC Jar / Cane and selaed packing Jar / Cane shall be accepted by the Engineer-in-charge and same shall be verified by GE.

Supply & fix in replacement MCB TP pole 415 volt AC of capacity 63 amps

All as per above item No 198 here-in-before but capacity 32 amps

Supply & fix in replacement of MCCB 200 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 100 amps 3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB160 amps 4 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 63 amps 3 pole 25 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

Supply & fix in replacement of MCCB 400 amps 4 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of MCCB 250 amps 4/3 pole 35 KA 415 volts 50 HZ in LT control panel complete all as specified and as directed by Engineer-in-charge.

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 50 to 110

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 40 to 45

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX 25 to 32

S&F in replacement of 3 pole power contactor with NO / NC block suitable for MNX upto 18.

Dismantling of 3 phase electric induction motor of any make and type and removing the old burnt copper winding wire from 25 /30 HP motor and rewinding with existing gauge of super enamelled copper winding wire including refixing in its original position and testing complete all as specified and as directed by Engineer-in-charge

All as per item No 202 here-in-before but cap of motor 50 HP

S&F ball bearing 6312 complete all as specified and as directed by Engineer-in-charge.

S&F ball bearing 6313 complete all as specified and as directed by Engineer-in-charge.

S&F roller bearing No NU-314C complete all as specified and as directed by Engineer-in-charge.

M&L for GI clamps of 32mmx5mm complete with screw 50mm long x 6mm dia complete with drilling the hole with drilling machine with rawl plugs / wooden gutties for fixing / clamping the GI pipes suitable for 50/40mm dia at a interval 01 mtr each complete by providing necessary scafolding upto the height of 15 mtrs complete all as specified and directed by Engineer-in-charge

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 50 to75 HP

Material and labour for scrubbing out the rust deposited on the surface of centrifugal pump set including its base frame and preparing for apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number as directed. capacity of pump set 5 to 20 HP

Supply and fix in replacement on load change over switch 4 pole 400 amps 440 volts open Execution type

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 50 HP 3 phase 415 volts over load relay range 65-100 amps

Supply and fix in replacement fully automatic star delta starter ML series with sheet metal enclosure suitable for 10- 15 HP 3 phase 415 volts over load relay range 45-65 amps

Supply and fix in replacement Motor Guard( weather protection cover) made out of 22 gauge GI Sheet suitable for 2 to 3 HP centrifugal mono block pump set with lifting handle and provision of suction /discharge pipeline Holes complete all as directed.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 5000 LTRS complete all as specified in SSR Part-I and directed by Engr-in-charge.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 2000 LTRS complete all as specified in SSR Part-I and directed by Engr-in-charge.

Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 LTRS complete all as specified in SSR Part-I and directed by Engr-in-charge.

M&L in replacement of Ladder for OHT/ UG sump with square bar,angle iron,channel, Flat Iron and etc welding, drilling, cutting with one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engineer in charge.

M&L in replacement of unserviceable / burnt mono block pump (pressure booster) set of capacity 0.5 HP to 0.75 HP complete including necessary cutting of GI pipe inserting tee and connection all as specified and as directed by Engineer-in-cjharge.

M&L in replacement of unserviceable / burnt mono block pump (pressure booster) set of capacity 1.0 HP complete including necessary cutting of GI pipe inserting tee and connection all as specified and as directed by Engineer-in-cjharge. Make:- Kirloskar Model Mini series 50S or equivalent.

Supply & fix Electronic overload relay (Manual reset) relay range 24-40 amp suitable for direct mountimg

Supply & fix Electronic overload relay (Manual reset) relay range 45-75amp suitable for direct mountimg

Supply & fix Electronic overload relay (Manual reset) relay range 66-110 amp suitable for direct mountimg

Supply & fixing in replacement of self priming recirculation pump set of capacity 4.5 HP / 4.08 KW- RPM-3000 RPM, Head-14 Mtrs induction motor type for swimming pool as per existing make and model complete all as specified and as directed by Engineer-in-charge

S&F in replacement pressure gauge analong type 4" dia 0-14 Kg rating complete all as specified and as directed by Engineer-in-Charge.

M&L in repair to fountain lights of any make and model complete all as specified and as directed by Engineer-in-Charge.

Supply & fix of monoblock pump single phase 2/3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply & fix of Submersible pump horizontal single phase 2/3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Supply & fix of Submersible pump single phase 5 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge.

Cleaning of under ground / semi under ground water storage sump of capacity 2x100000 gallons (Old & New pump house) having two compoartments by tank clean process which is folowing :- (a) Mechanised removal of all remaining dirty water by high capacity submersible pump set (b) Removal of sludge by vacuum operated German pump (c) Cleaning of walls, ceiling and bottom of tank by German made high pressure rotary jet 120 bars pressure (d) Removal of all dirty particle by industrial wet vacuum cleaner leaving the tank 99.9% physically cleaned (e) Sterlization of tank by Eco-Friendly biodegradable and highly effective against all pathogens (f) Sterlization of tank atmosphere by industrial UV radiator leaving the tank complete sterlite by Spealized Method specialized firm as approved by Govt.

All as per above item No 229 here-in-before but underground water storage sump of capacity 2x50000 gallons having two compartments (Mandir pump house) & (MT pumphouse) complete all as specified and directed by Engr-in-Charge.

All as per above item No 229 here-in-before but underground water storage sump of capacity 20000 gallons (Sabji Mandi-01 No, HQ WAC Offcers mess-01No, SP-32- 01 No) complete all as specified and directed by Engr-in-Charge.

All as per above item No 229 here-in-before but underground water storage sump of capacity 35000 gallons (Sabji Mandi-02 Nos) complete all as specified and directed by Engr-in-Charge.

All as per above item No 229 here-in-before but underground water storage sump of capacity 10000 gallons (Swimming pool-02 Nos) complete all as specified and directed by Engr-in-Charge.

All as per above item No 229 here-in-before but over head water tank of upto 45 mtr staging (Height of OH Tank) of capacity 100000 gallons (Subji Mandi pump house-01 Nos) complete all as specified and directed by Engr-in-Charge. NOTE FOR ITEM NO 229 TO 234 :- All the sluge materials / fungs removed from the underground sump / semi underground sump and over head tanks will be removed from the site to a distance not exceeding 50 mtr and all underground sump / semi underground sump and overhead tanks will be cleaned in all respect upto 3 mtr around the water tanks. The cost of the same shall be deemed included in the respective items. All T&P required for the cleaning of tanks / sumps will be arranged by the contractor.

M&L for preparation of old treated surfaces, cleaning throughly and providing two coat of Apex weather proof to the OH tank, UG Sump, pillars etc with specified colours, including marking of cleaning record as directed in painting complete all as specified for following OH tanks, UG sumps : - Semi underground water storage sump of capacity 2x100000 gallons (Main pump house- 01 Nos) having two compartments

All as per item No 235 above but Semi underground water storage sump of capacity 2x50000 gallons (Mandir pump house- 01 Nos) & (MT pumphouse) having two compartments

All as per item No 235 above but Semi underground water storage sump of capacity 35000 gallons ( (Sabji Mandi-01 Nos))

All as per item No 235 above but Semi underground water storage sump of capacity 10000 gallons (Swimming pool-01 Nos)

All as per item No 235 above but Over head water tank of upto 45 mtr staging (Height of OH Tank) of capacity 100000 gallons (Subji Mandi pump house-01 Nos)

Supply only Soda Ash

Supply only Alum

Supply only Copper Sulphate (CuSO4)

Supply only HCL (Acid)

Disconnecting from supply and dismantling and repair of under water light fitting Halogen / LED type 20 watt 12 volts by replacing LED/BULB, water proofing, wiring, driver etc complete all as specififed and as directed by Engineer-in-charge

Supply and fixing in replacement of unserviceable under water light fitting LED 20 watt 12 Volt complete including water proofing joint. complete all as specified and directed by Engr-in-charge.

S&F in replacement constant voltage driver CVD for light (12 volts) suitable for LED 20 watt 12 volt luminaries complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 50mm dia (OD 63mm) complete

Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 80mm dia (OD 90mm) complete

Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 150mm dia (OD 160mm) complete

Supply and fixing in replacement of unserviceable water type cast iron butterfly valve class PN-1.0 of size 200mm dia (OD 250mm) complete

Supply and fixing in replacement of unserviceable water type cast iron non return valve of size 80mm dia having matching flange class PN-1.0 complete all as specified and as directed by Engineer-in-charge

Supply and fixing in replacement of unserviceable MCCB 63 amps 415 volts TP 25 KA complete all as specified and as directed by Engineer-in-charge

Supply and fixing in replacement of unserviceable Grating made of UV stablized polypropelene Height 33mm width 295mm for over flow drain complete all as specified and as directed by Engineer-in-charge

Supply and fix in replacement multi fuction valve size 100 / 80 / 63 mm (Filter, Rinse, Waste, Close, Backwash, & Recirculate option in built) including necessary fittings required at site to match with the existing and connected to as per exisiting size and Make for swimming pool complete all as directed .

SUPPLY ONLY MENTIONED BELOW ITEMS FOR SWIMMING POOL MAINTENANCE ACESSORIES : - (a) SUCTION SWEEPER PVC PIPE : - Suction sweeper PVC pipe 50mm dia

(b). Test kit for residual chlorine & Ph including necessary chemicals

S&F in replacement & jointing in position of unserviceable UPVC pipe conforming, to IS: 4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g coupling, tees, bends, reducers, screwed adapters, flanged tails pieces etc. jointing as per manufacturers insturctions , including excavation, earth work (45cm width and 30 cm depth) in any type of soil / rock complete all as directed for the following :- (a) UPVC pipe 90 mm OD-6 Kg/cm²

(b) UPVC pipe 75 mm OD-6 Kg/cm²

(c) UPVC pipe 63 mm OD-6 Kg/cm²

(d) UPVC pipe 50 mm OD-6 Kg/cm²

Supply & fixing in replacement of unserviceable Sprinkler gear driven pop up Pro Sport with ABS Riser with 1" inlet and 4" Riser, patented are set degree markings are memory clutch , time proven patenteed revesing mechanisim. It has rubber cover which seals out dirt and increase product durability and having optical check valve capable of delivering 0.32 to 2.05 lps with dia of coverage from 27.4 to 45.72m at 2.76 to 6.21 bar.

S&F in replacement of unserviceable 1" Swing Joint.

S&F in replacement of unserviceable 1" one piece QCV, auto close lid made of heavy duty rubber when QCV is not use, one piece construction, having stainless steel spring, brass valves.

S&F in replacement of unserviceable 1" QCV Key wih handle with 1" outlet

S&F in replacement of unserviceable 1" QCV Key swivel elbow

S&F in replacement of unserviceable Metallic services saddle 90 mm X 1"

S&F in replacement of unserviceable Valves box 20" Rectangular Valve box with cover. The valve boxes shall be high strength , high density polyethelene constructed material. It should be \UV stablizer with anti oxidants, resistant to moisture.

S&F in replacement of unserviceable Valves box 6" round Valve box with cover. The valve boxes shall be high strength , high density polyethelene constructed material. It should be \UV stablizer with anti oxidants, resistant to moisture.

S&F in replacement of unserviceable Aluminium pilot pressure relief valve size 2" alongwith by pass arrangement, cover and necessary fittings. It shall be adjustable pressure setting from 22 PSI for maximize performance . It shaould be high strength cast Aluminium body, stainless steel shaft offer, strength and corrosion resistant. Oil tempered coil spring provides quick response for individual pressure range.

S&F in replacement of unserviceable a double acting plastic Air release valve 2" made of high strength plastic with fiber glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line . The working pressuee shall be 10 Bars and testing pressue shall be 16 Bars.

S&F in replacement of unserviceable of Disc filter (120 mesh) 30 m 3/Hr having one inlet & two outlets connections of 3", 2 pressure gauze ports of 3/4" , a helix made of fiber glass reinforce polyamide at base of disc filter cartridage to create a helical effect in the incomming water , spinning particulate in suspension away fromk the filtering element and so minimizing clearings frequency, 3/4" outlent for flusing at botom of filter & maximum working pressure of 14 bars.

S&F in replacment of unserviceable pressure gauge (Glycerine filled)

S&F in replacement of unserviceable PVC insulated single core multistanded copper conductor cable 4 Sqmm complete all as specified and directed by Engineer-in- charge

(a) Supply & fixing in replacement of 2" BSP straight flow solenoid valve with flow shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact , weather-resistant Nylon Glass filled with heavy duty diaphragm and stainless steel, screws, fasteners and components, The valve shall have manual open/ close control (internal bleed) for mannual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minutes at 10.5 bars and less than 30 seconds at 0.7 bar. The valve constructin shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation.

(b) Supply & fixing in replacement of pump start relay enclosure shall be constructs with a corriosin resistant, UV resistant and shock proof, rain tight , secure and rust proof enclosure.

(c) Supply & fixing in replacement of 1.5 Sqmm 2 triple core copper conductor cable

(d) Supply & fixing in replacement of 10 Sqmm 2 single core copper conductor cable

(e) Supply & fixing in replacement of conduit pipe 1 " for laying of electric wires.

M&L for chemical and bacteriological analysis and potability of water obtained from Delhi Jal Board & various bore wells from Sriram Test House / MCD Approved Micro Engineering and Testing Lab and submitting the report in duplicate to GE for verification complete all as specified and as directed by Engineer-in-charge

S&F in replacement of 3 pole power contactor suitable for MNX 50 to 70 / ML-4. Complete all as specified and as directed by Engineer-in-charge

All as per above item No 281 here-in-before but for MNX 40 to 45 / ML-3

All as per above item No 281 here-in-before but for MNX 25 to 32 / ML-2

All as per above item No 281 here-in-before but for MNX upto 18 / ML-1.5

Supply and fixing in replacement unserviceable overload relay range 28-42 amps complete all as specified and as directed by Engineer-in-charge.

All as per above item No 285 here-in-before but over load relay of range 9-15 amps MNX

Suply and fixing in replacement of unserviceable Single phase preventor VSP-2 complete all as specified and as directed by Engineer-in-Charge

Opening the pressure filter 1200mm dia Make-Pentair installed at swimming pool equipment room removing the old filter media, removing all the scaling deposited on the surface area of filter assembly by using wire brush and cleaning the filter with HCL, refilling new filter media of various silica grade as required at site, re-assembling the filter assembly and apply one coat of good quality paint on the outer surface area of the filter assembly and testing for leakage for proper functioning and testing complete all as directed by Engr-in-charge.

Supply & fixing in replacement of self priming recirculation pump set of capacity 4.5 HP / 4.08 KW- RPM-3000 RPM, Head-14 Mtrs induction motor type for swimming pool as per existing make and model complete all as specified and as directed by Engineer-in-charge

M&L for replacement of pressure booster pump 1 HP capacity single phase, 50 Hz mounted on roof for boosting water supply to high pressure and connected with existing water supply pipe line including necessary electrical wire and plug top , NRV socket alll as specified and directed by Engr -in-Charge.

M&L for replacement of pressure booster pump 0.5 HP capacity single phase, 50 Hz mounted on roof for boosting water supply to high pressure and connected with existing water supply pipe line including necessary electrical wire and plug top , NRV socket alll as specified and directed by Engr -in-Charge.

Repairs to fire hose cabinet including replacement of unserviceable broken glass, aluminium tower bolts door steples locks wooden pieces hold fastners connect work and painting to fire hose cabinet and writing necessary information of Hydrant including cement work as required at site complete all as specified and as directed by Engineer-in-charge

S&F in replacement of fire hydrant valve single headed of size 63mm bore complete

S&F in replacement of hose real drum 30m complete along with brass adopter for fixing in hydrant valve

S&F in replacement of RRL hose pipe 15m long complete

S&F in replacement of RRL hose pipe 30m long complete

Dismantling & taking out defective part of centrifugal pump set coupled with 60 HP motor and refixed after making it complete serviceable by repairing/replacement complete all as specified and as directed by Engineer-in-charge.Note :- Parts to be replaced under this item shall be paid as supply only under respective items

Supply only shaft of existing material suitable for 60 HP motor

Supply only impeller of existing material suitable for 60 HP motor

Supply only shaft sleeve of existing material suitable for 60 HP

Drive end Bearing No 6313

Supply only Cast iron bearing housing for 60 HP motor

Supply only Gland assembly suitable for 60 HP motor

Supply only throat bush suitable for 60 HP motor

Supply only mechanical seal suitable for 60 HP motor

Supply only rotor body suitable for 60 HP complete all as specified and directed by Engineer-in-charge

Supply only shaft coupling suitable for 60 HP pump set

Supply only ball bearing as per existing complete all as specified and directed by Engineer-in-Charge. Make- SKF / NBC

Supply only roller ball bearing as per existing complete all as specified and directed by Engineer-in-Charge. Make- SKF / NBC

S&F cooling fan for 60 HP induction motor of any make and type.

M & L for centrifugal type induction motor of capacity 60.00 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick 'O' ring including refixing in its original position and testing complete ( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge.

Taking out existing GI pipe 150mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge

All as per above item No 312 here-in-before but size 100mm bore

Supply and fixing GI tubing medium grade 150mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge. Make- Jindal / Tata

All as per above item No 313 here-in-before but size 100mm dia bore

Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers cleaned connected to and including GI earth strip 32 x 6mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c both ways and PCC chamber pit with pcc 1:2:4 Type B2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part -I 2009

Supply only TCCA-90 (TRICHLOR CYNURIC ACID)

AMIT ENTERPRISES

SANWARIYA ENTERPRISES