Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.5 Craccepted-aoc | ₹1.5 Cr | accepted-aoc |
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
25 Mar 2026, 9:30 pmClosed
Minor Irrigation Department
Mahadev B
Providing Lift Irrigation Scheme to farmers lands of Govanakoppa Village in Bailhongal Tq Dist Belagavi (4702/2025-26)
MI/2025-26/LI/WORK_INDENT10463/CALL-2
MI/2025-26/LI/WORK_INDENT10463/CALL-2
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
Minor Irrigation Division Belgaum
9 documents required · 9 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
b) Satisfactorily completed (at least 90% of the Contract value), in last five years (i,e. 2020-21 to 2024-25) as prime contractor, at least one similar work such as Providing Lift Irrigation Scheme work to an extent of 50% of the cost of the work Rs.75.00 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer (if the work is done in other states)
c)Executed in any one year, the following minimum quantities of workExcavation and Embankment (combined quantities)3930Cum Cement concrete (Including RCC & PSC40.00 CumProviding Steel Reinfrocment fabrication1160Kgs Providing & installing HDPE Pipes PE 110 PN-6200mm dia 160, mm dia6480Rmtr Supply&fixingof Submersiblepumpsets65HPwith electrical2Nos
A Copy of GST Registration Certificate
Income Tax :Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos.
Scanned signature of the bidder/representative to be attached while uploading the bid document
Section 3, Qualification Information
The tenderer shall also disclose if there are any bankruptcy proceedings against him
3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24, 2024-25)(a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.297.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2025-26
Assessed available tender capacity-AxNx1.5-B where A -Maximum value of civil engineering works executed in any one year during the last five years (i.e. 2020-21 to 2024-25) (updated to 2025-26 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2025-26 price level of existing commitments and on-going works to be completed during the next 06/12 years (period of completion of the works for which Tenders are invited) Note -The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
b) Liquid assets and /or availability of credit facilities of no less than Rs.75.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
₹3,710
₹2.2 L
25 Mar 2026
18 Mar 2026
26 Mar 2026
24 Mar 2026
24 Mar 2026
Amount
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Formwork Centering at 3 percent
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Forwork for Colum at 70 percent
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Formwork for Beam and Lintel at 60 Percent
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification)
Design, manufacture, supply, erection, trail running, performance testing and commissioning of Submersible pump of approved make conforming to IS: 8034 (2002) having specified pump output under specified operating head coupled to LT motor of adeuate HP rating operating at suitable KV with flexible coupling, self water lubricated thrust bearings, discharge Tee with flanged end for connecting delivery pipe with all other standard accessories and saftey device& all necessary works etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Duty point Head = 154.00 m Duty point discharge = 0.030 cumecs Motor rating 48.49 KW (65 HP) x 2 (1 Working + 1 Standby)
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) a) 4 core 2.5 sqmm
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)b) 4 Core 6 Sq.mm Cables
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)d) 2 Core 6 Sq.mm Cables
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)c) 2 Core 2.5 Sq.mm Cables
Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) b). From Transformer to panel3.5 core 240 sqmm cable with end connecters
Fabricating supplying and mounting MS boxmadeout18SWGsuitableforfloor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements,with suitable sizeclamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenancesetc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification)
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) .For Ordinary/soft rock (without requiring blasting)
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Description of item (with brief specification and reference to Book of Specification)
Amount
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Formwork Centering at 3 percent
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Forwork for Colum at 70 percent
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Formwork for Beam and Lintel at 60 Percent
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification)
Design, manufacture, supply, erection, trail running, performance testing and commissioning of Submersible pump of approved make conforming to IS: 8034 (2002) having specified pump output under specified operating head coupled to LT motor of adeuate HP rating operating at suitable KV with flexible coupling, self water lubricated thrust bearings, discharge Tee with flanged end for connecting delivery pipe with all other standard accessories and saftey device& all necessary works etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Duty point Head = 154.00 m Duty point discharge = 0.030 cumecs Motor rating 48.49 KW (65 HP) x 2 (1 Working + 1 Standby)
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) a) 4 core 2.5 sqmm
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)b) 4 Core 6 Sq.mm Cables
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)d) 2 Core 6 Sq.mm Cables
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)c) 2 Core 2.5 Sq.mm Cables
Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) b). From Transformer to panel3.5 core 240 sqmm cable with end connecters
Fabricating supplying and mounting MS boxmadeout18SWGsuitableforfloor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements,with suitable sizeclamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenancesetc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification)
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) .For Ordinary/soft rock (without requiring blasting)
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Description of item (with brief specification and reference to Book of Specification)
Amount
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Formwork Centering at 3 percent
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Forwork for Colum at 70 percent
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Formwork for Beam and Lintel at 60 Percent
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification)
Design, manufacture, supply, erection, trail running, performance testing and commissioning of Submersible pump of approved make conforming to IS: 8034 (2002) having specified pump output under specified operating head coupled to LT motor of adeuate HP rating operating at suitable KV with flexible coupling, self water lubricated thrust bearings, discharge Tee with flanged end for connecting delivery pipe with all other standard accessories and saftey device& all necessary works etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Duty point Head = 154.00 m Duty point discharge = 0.030 cumecs Motor rating 48.49 KW (65 HP) x 2 (1 Working + 1 Standby)
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) a) 4 core 2.5 sqmm
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)b) 4 Core 6 Sq.mm Cables
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)d) 2 Core 6 Sq.mm Cables
Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)c) 2 Core 2.5 Sq.mm Cables
Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) b). From Transformer to panel3.5 core 240 sqmm cable with end connecters
Fabricating supplying and mounting MS boxmadeout18SWGsuitableforfloor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements,with suitable sizeclamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenancesetc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification)
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) .For Ordinary/soft rock (without requiring blasting)
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Description of item (with brief specification and reference to Book of Specification)
Amount
Providing & fixing Weasel ACSR Conductor with 1.5% Sag etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)
Item Details
Tonne
Each Point
Each Point
Each Point
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : Five
Item Code : Six
Item Code : Seven
Item Code : Eight
Item Code : Nine
Item Code : Ten
Item Code : Eleven
Item Code : Twelve
Item Code : Thirteen
Item Code : Fourteen
Item Code : Fifteen
Item Code : Sixteen
Item Code : Seventeen
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : Five
Item Code : Six
Item Code : Seven
Item Code : Eight
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : Five
Item Code : Six
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : Five
Item Code : Six
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : Five
Item Code : Six
Item Code : One
Item Code : Two
Item Code : Three
Item Code : Four
Item Code : Five
Item Code : Six
Item Code : Seven
Item Code : Eight
Item Code : Nine
Item Code : Ten
Item Code : Eleven
Item Code : Twelve
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Royalty.pdf
Others - Royalty • 0.19 MB
banker certificate.doc
Others - banker certificate • 0.03 MB
Drawings.pdf
Design Document • 0.23 MB
Govt GO.pdf
Others - Govt GO • 0.54 MB
detail specification.zip
Others - detail specification • 29.02 MB
standard bid document kw-4 Govankoppa LIS.doc
Tender Document • 3.22 MB
Bar Chart Office10463.xls
Others - Bar Chart Office10463 • 1.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .