Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.3 LAccepted-AOC HOUSE NO 1 I V LRC COLONY NOTUN BOSTI DIMAPUR DIMAPUR NAGALAND 797112 | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable Rate | |
| 2 | L2₹47.3 L+₹65,637.50 (1.41%)Rejected-AOC | L2 | Rejected-AOC Highest Rate | |
| 3 | L3₹47.3 L+₹68,995.75 (1.48%)Rejected-AOC | L3 | Rejected-AOC Highest Rate |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPECIAL REPAIR TO BLDG NO T2 AND T22 OF 220 TRANSIT CAMP AT RMS PROVN OF ADDN ALTN TO BLDG NO T49 IN SANGAM COMPLEX AT RMS AND PROVN OF HARD STANDING NEAR BLDG O T5 AT SPEAR WELFARE COMPLEX AT RMS
2022_MES_571831_1
8512/C/E8
Open Tender
Civil Works
Item Rate
183 days
RANGAPAHAR
Please refer tender documents
3 documents required · 3 mandatory
₹500
Yes
GE 868 EWS
₹90,000
Yes
27 Feb 2023
29 Dec 2022
27 Jan 2023
29 Dec 2022
25 Jan 2023
13 Jan 2023
29 Dec 2022 - 5 Jan 2023
Amount
B/R-PORTION Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Dismantling timber scantlings unframed work 40 sqcm and over in section in any position complete all as specified and directed.
Demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.
Dismantling Asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering etc complete all as specified and directed.
Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description etc complete all as specified and directed.
M&L roughening surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level etc complete all as specified and directed.
M&L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment etc complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in hardstanding etc complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed.
M&L 25mm th PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth without using extra cement etc complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.
Same as per ser No 17 but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured ceemnt to match etc complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick CM (1:4) backing coat etc complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.
M&L for Cement concrete type C-2 1:3:6 (40mm grade stone aggregate) in foundations, filling and mass concrete etc complete all as specified and directed.
M&L 100 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in floor etc complete all as specified and directed.
S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.
S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165) etc complete all as specified and directed.
S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming Fe 410-W (gde E-250 Quality-A) etc complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. for steel work in roof trusses, purlins,rails and fastening heavey bracket framing including distance pieces, cleats etccomplete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed.
S&F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated confirming Fe-290 (Gde E-165) etc complete all as specified and directed.
S&F 2nd class hard wood scantling as in purlins rafters & framed work etc clean sawn etc complete all as specified and directed.
All as per item no. 30 as above but except timber etc complete all as specified and directed.
S&F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and directed.
S&F for 10mm thick of size 600 x 600mm acoustic ceiling boards to be fixed or laid with GI/aluminium frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and directed.
M&L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards etc complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and directed.
M&L GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste etc complete all as specified and directed.
M&L 15mm thick plastering in CM 1:4 on one side of lathing in two separate layers even and smooth without using extra cement etc complete all as specified and directed.
M&L 10 mm thick plastering in CM 1:6 the other side of lathing finished even and smooth without using extra cement etc complete all as specified and directed.
M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints etc complete all as specified and directed.
S&F for Pressed steel frames of 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F for Pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats etc complete all as specified and directed.
M&L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and directed.
M&L 30mm thick 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) etc complete all as specified and directed.
M&L 30mm thick 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) etc complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
Refixing of aluminium window shutters of any descriptions n exc 1 Sqm each in same openings includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
All as per item no. 47.00 above but exc 1 Sqm and n. exc 2 Sqm each etc complete all as specified and directed.
S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
S&F Sheet glass 4.8mm thick, ordinary quality ground or obscured or frosted, on one side and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing etc complete all as specified and directed.
M&L butt hinges medium weight cold rolled mild steel and fixed size of hinges 100 mm long size etc complete all as specified and directed.
M&L butt hinges, medium weight cold rolled mild steel and fixed 75 mm long size etc complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long etc complete all as specified and directed.
S&F 150mm long aluminum hook and eye, etc complete all as specified and directed.
S&F Aluminium handle cast type anodised 150 mm long etc complete all as specified and directed.
S&F 125mm size aluminium handles,cast type,anodised etc complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) etc complete all as specified and directed.
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm etc complete all as specified and directed.
M&L sheet glass ordinary quality 3mm thick and glazing with oil putty/rebates in squares n.exc. 0.5 sqm each pane etc complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water etc including cleaning of bush, shrubs, vegetation, grass,weed,saplings etc complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashalar facing etc complete all as specified and directed.
M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius in CM 1:6 using old size bricks etc complete all as specified and directed.
M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and directed.
M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and directed.
M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and directed.
S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified and directed.
M&L for 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework etc complete all as specified and directed.
S&F external teak wood lipping, 6mm thick, fixed with nails etc complete all as specified and directed.
M&L for 75mm aluminium handles, cast type , anodised etc complete all as specified and directed.
S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished etc complete all as specified and directed.
S&F magnet Catcher for cup board etc complete all as specified and directed.
M&L for Pin headed frosted glass pane 3mm thick & glazing with oil putty in square in not exceeding 0.5 Sqm in each pane etc complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface and priming with chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade on walls etc complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.
M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.
Taking up or down steel tubing and connections including all fittings for 15 mm bore GI tubing etc complete all as specified and directed.
Taking up or down steel tubing and connections including all fittings for 20 mm bore GI tubing etc complete all as specified and directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing etc complete all as specified and directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing etc complete all as specified and directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.
S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete etc complete all as specified and directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and directed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete etc complete all as specified and directed.
S&F of soap-dish chromium plated etc complete all as specified and directed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws etc complete all as specified and directed.
S&F towel ring of PTMT fixed with and including Chromium plated Brass Screws and wooden/ plastic cleats ( Minimum weight 90 gms) etc fixed in kitchen etc complete all as specified and directed.
S&F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and directed.
S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) etc complete all as specified and directed.
S&F Glass shelves, with 12mm thick desher glass incl CP brackets with brass nuts 300 mm long etc complete all as specified and directed.
M&L cement concrete type C2 1:3:6 (40 mm graded stone agg) as in surface channels and drains etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary formwork etc complete all as specified and directed.
S&F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and directed.
S&F for 4 mm thick veneered decorative Plywood (no of ply 05), grade-I (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work etc complete all as specified and directed.
M&L second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads etc complete all as specified and directed.
S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor etc complete all as specified and directed.
S&F PVC (SWR) 110mm dia bends in any radius etc complete all as specified and directed.
S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor etc complete all as specified and directed.
S&F of PVC (SWR) 75 mm dia pipe as in floor etc complete all as specified and directed.
S&F of PVC (SWR) 75 mm dia vent cowl pipe etc complete all as specified and directed.
S&F for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls etc complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius etc complete all as specified and directed.
M&L Viterous china ware wash down water closet pan (EWC), pedestal pattern coloured including plastic WC seat black closed pattern with flat bottom and cover and mild steel chromium plated of aluminised hinging device, complete fitings etc complete all as specified and directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover etc complete all as specified and directed.
Supply only flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern etc complete all as specified and directed.
S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual flush type complete all as specified (Make Cera, F1020106) etc complete all as specified and directed.
Re-fixing of Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.
S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws etc complete all as specified and directed.
S&F in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed.
S&F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star).
S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed for WC (Make - SONA/ADSON/ ESSCO).
S&F in repair brass CP mixer for basin mixing hot & cold water screwed down for iron pipe and fixed 15mm dia pipe etc complete all as specified and directed. and as approved by GE.
S&F cast iron P or S trap of 100mm dia etc complete all as specified and directed.
S&F in repairs 15mm dia stop cock fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and directed.
S&F in repairs CP wall mixer (3 in 1) etc complete all as specified and directed. and as approved by GE.
S&F toilet paper holder, coloured vitreous china, box type fixed to walls etc complete all as specified and directed.
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and directed.
S&F in repair Fancy type brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc complete all as specified and directed.
E/M PORTION Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface etc complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
(a) One light/ Bell Point controlled by one way switch .
(b) One Exh/Ceiling fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No-137.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 6 Amp etc complete all as specified and directed. Make:- Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 3 pin 5A flush type etc complete all as specified and directed. Make:- Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and directed. Make:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 6A/16A, 5 in 1 flush type etc complete all as specified and directed. Make:- Havells/Legrand/Anchor
M&L for Bell push 6A etc complete all as specified and directed. Make:- Havells/Legrand/Anchor
M&L for Bell Multi Music type Make:- Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and directed. Make:- Havells/Legrand/Achor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body etc complete all as specified and directed. Make:- Havells/Legrand/Achor
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel/Richa Make of caping/casing :- Prestoplast/Finolex/supreme/Richa
S&F for LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton/Havells/Bajaj/ Philips.
All as per item No-148.00 above but 10 Watt LED 2' Wall mounted with polycarbonate housing/batten etc complete all as specified and directed.Make : Crompton/Havells/Bajaj/ Philips.
M&L in replacement for Decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and as directed. Make : Crompton/Havells/Bajaj/ Philips.
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting etc complete all as specified and directed. Make : Crompton/Havells/Bajaj/ Philips.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and directed.Make : Havells/Crompton/Bajaj/Philips
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and directed. Make : Havells/Crompton/Bajaj/Philips
Taking down carefully ceiling light fitting round/square type and refixing the same after repair/replacement of ceiling work etc complete all as specified and directed.
Supply and fixing LED focus light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and as directed. Make : Philips/Havells/Bajaj
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for refixing and hanging only ceiling fan (MD supply) and connecting up including provision of cable from ceiling rose or connector completion complete all as specified and as directed.
M&L for MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand /Havells/Siemens
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand /Havells/Siemens
Supply and fixing for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and directed. Make : Legrand/ABB/Siemens
M&L for MCB TPN 40 to 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB SPN 40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand /Havells/Siemens
M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand /Havells/Siemens
Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Havells/Richa/Polycab
All as per item No- 164.00 here-in-before but 10 Sqmm 2 core
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed.
M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes ' Medium grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable
Rameshwar Prasad
Kalim sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .