DEFPROC

Technical Eval

Goods

Miscellaneous Goods

Term for supply / fabrication of MS bins capacity 1.25 Cum and 4.5 Cum MS steel container for skip loader for the sanitation purpose for Pune Cantonment Board (2nd call)

Directorate General Defence Estates

Pune, Maharashtra

Amount: Refer DocsCloses: 4 Jun 2026Closed

Timeline

Published22 May 2026
Closed4 Jun 2026
Technical Evaluation2 Jul 2026
Award—

Bids

3 Bids2 Jul 2026

#	Company	Status
1	adya environmentals Rejected-Technical	Rejected-Technical Documents not submitted as per tender
2	MALWA ENGINEERING Rejected-Technical	Rejected-Technical Documents not submitted as per tender
3	ZEN TECHNO ENGINEERING PVT LTD Rejected-Technical	Rejected-Technical Documents not submitted as per tender

Tender Value

Refer Docs

EMD Value

₹50,000

Closing Date

4 Jun 2026, 11:00 amClosed

Tender Inviting Organisation

Name

CHIEF EXECUTIVE OFFICER

Address

Office of the Cantonment Board, Golibar Maidan, Pune 411001

Work Description

Term for supply / fabrication of MS bins capacity 1.25 Cum and 4.5 Cum MS steel container for skip loader for the sanitation purpose for Pune Cantonment Board (2nd call)

Tender Information

Tender ID

2026_DGDE_767074_1

Reference Number

PCB/Wksp/2026-2nd call

Tender Type

Open Tender

Product Category

Miscellaneous Goods

Form of Contract

Supply

Period of Work

90 days

Location

PUNE

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredTechnical bid (.pdf)

Finance

RequiredFinancial bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹3,540

Tender Fee Payable To

Chief Executive Officer, Pune

EMD Fee Amount

₹50,000

Important Dates

Last Activity

2 Jul 2026

Published

22 May 2026

Bid Opening

5 Jun 2026

Download Starts

22 May 2026

Download Ends

4 Jun 2026

Submission Starts

22 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1FABRICATION OF MS BINS FOR SKIP LOADERS AS WELL AS COMPACTOR
1.01	FABRICATION OF M S BINS CAPACITY 1.25 CMT FOR SKIP LOADER As per the attached sketch and specimen available in this office. All welded steel construction with stipulated wall using MS sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. Two adequate support should be provided at the bottom for ground clearance.All wheels of the containers should be of M.S	-	Nos	-	-
1.02	FABRICATION OF M S BINS CAPACITY 4.5 CMT FOR SKIP LOADER As per the attached sketch and specimen available in this office. All welded steel construction with stipulated wall using MS sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. Two adequate support should be provided at the bottom for ground clearance.All wheels of the containers should be of M.S	-	Nos	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.08 MB

Work Item Documents

wtenderskip.pdf

Tender Documents • 0.68 MB

BOQ_859075.xls

BOQ • 0.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

adya environmentals

Rejected-Technical

MALWA ENGINEERING

Rejected-Technical

ZEN TECHNO ENGINEERING PVT LTD

Rejected-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1FABRICATION OF MS BINS FOR SKIP LOADERS AS WELL AS COMPACTOR
1.01	FABRICATION OF M S BINS CAPACITY 1.25 CMT FOR SKIP LOADER As per the attached sketch and specimen available in this office. All welded steel construction with stipulated wall using MS sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. Two adequate support should be provided at the bottom for ground clearance.All wheels of the containers should be of M.S	-	Nos	-	-
1.02	FABRICATION OF M S BINS CAPACITY 4.5 CMT FOR SKIP LOADER As per the attached sketch and specimen available in this office. All welded steel construction with stipulated wall using MS sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. Two adequate support should be provided at the bottom for ground clearance.All wheels of the containers should be of M.S	-	Nos	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1FABRICATION OF MS BINS FOR SKIP LOADERS AS WELL AS COMPACTOR

1.01

FABRICATION OF M S BINS CAPACITY 1.25 CMT FOR SKIP LOADER As per the attached sketch and specimen available in this office. All welded steel construction with stipulated wall using MS sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. Two adequate support should be provided at the bottom for ground clearance.All wheels of the containers should be of M.S

Nos

1.02

FABRICATION OF M S BINS CAPACITY 4.5 CMT FOR SKIP LOADER As per the attached sketch and specimen available in this office. All welded steel construction with stipulated wall using MS sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. Two adequate support should be provided at the bottom for ground clearance.All wheels of the containers should be of M.S

Nos