REPAIR TO TRADE PATTERN FURNITURE AT AF STATION GWALIOR

Amount

PART-I REPAIR OF CHAIR REVOLVING/EXECUTIVE/COMPUTER OF TRADE PATTERNS. (Make EEZY CH-201, 204, 205, 217, 225 ,297,361, 355 and similar chair of make Godrej, Methodex, Delite, FD/E 6/MAP/01)M&L for repair & replacement of the following components of chair revolving/tilting complete all as directed by Engineer-in-Charge

Removing of existing old worn out/unserviceable tapestry cloth, foam, etc from seat and providing new tapestry cloth over with and including new polyurethane foam cushion 75mm thick, 40 density and cloth fixing in shape as per existing and necessary PVC beading wherever required as per design of existing chair complete all as shown on drg. Make of foam:-Raj foam/Sleep Well /MM Foam

Removing existing old worn out/unserviceable tapestry cloth, foam etc from back and providing new tapestry cloth over with and including new polyurethane foam cushion 50mm thick 32 density and cloth fixing in shape and necessary PVC beading wherever required as per design of existing chair complete all as shown on drg Note for item No 1.10 & 1.20 :-It must be noted that cushion shall be made to shape and size as per the exiting one.Make of foam:-Raj foam/Sleep Well /MM Form

Removing old broken/worn out casters wheels (not less than 50mm Dia) and supply and fixing new casters as per existing & as approved.

Removing existing broken arm rest (handles) and supply and fixing new arm rest (handle) with one piece arm rest (handle) made of black integral skin polyurethane reinforced with MS insert as per drawing & as directed by Engineer –in-Charge.

Removing existing old broken lifting/support mechanism and supply and fixing new hydraulic support mechanism (Pneumatic height adjustment) including steel spring as per existing & as directed by Engineer –in-Charge.

Removing existing broken/worn out shaft and supply and fixing new shaft as per existing & directed by Engineer-in-Charge

Removing existing worn out old ball bearing and supply and fixing new ball bearing of same size & as approved. Make :-SKF/NBC

Removing existing locking key of shaft and supply and fixing new locking as existing and as & as approved.

REPAIR OF CHAIR VISITOR(Make EEZY-CH-218, 219, 225 , 217, 227 and similar chairs of Godrej/Delite com)) M&L for repair & replacement of the following components of chair visitor complete all as directed by Engineer-in-Charge.

Removing of existing old worn out/unserviceable tapestry cloth, foam, etc from seat and providing new tapestry cloth over with and including new polyurethane foam cushion 3"thick, 40 density and cloth fixing in shape as per existing and necessary PVC beading wherever required as per design of existing chair complete all as shown on drawing.Make of foam:-Raj foam/Sleep Well /MM Form

Removing existing old worn out/unserviceable tapestry cloth foam back and providing new tapestry cloth, over with and including new polyurethane foam cushion 2” thick 32 density and cloth fixing in shape as per existing and necessary PVC beading wherever required as per design of existing chair complete all as shown on drg.Note for item No 2.10 & 2.20 ):-It must be noted that cushion shall be made to shape and size as per the exiting one.Make of foam:-Raj foam/Sleep Well /MM Form

Removing existing broken arm rest (handles) and supply and fixing new arm rest (handle) with one piece arm rest (handle) made of black integral skin polyurethane reinforced with MS insert as per drawing & as directed by Engineer –in-Charge.

RECANNING OF CHAIR VERANDAH(FD-19/255 & FD/MAP-II/15)

M&L for recanning of chair verandah seat and back with 4mm wide nylon plastic cane as godrej pattern complete all as shown on drawing including removing old cane from seat. The newar shall be of best quality as approved

M&L for Gas welding of chair verandah on joints/crack complete all as directed by Engineer–in-charge.

M&L for preparing of chair verandah and applying one coat of white synthetic enamel paint complete all as directed.

Removing of unserviceable shoes and S/F new rubber shoes as approved

Supply and fixing in replacement stiffeners made out of 18/19mm dia MS conduit having wall thickness 1.6mm x 470mm long pipe with gas welding duly painted with one coat of red oxide primer and one coat of synthetic enamel white paint and all as specified as directed by Engineer-in-Charge.

M&L for removing unserviceable PVC from chair verandah and recanning of chair verandah seat and back with 4mm wide nylon plastic cane as godrej pattern complete all as shown on drawing including removing old cane from seat. The newar shall be of best quality as approved

Removing the unserviceable PVC seat from chair verandah and supply & fixing PVC seat 4mm thick sheet made of PPCP material weight not less than 1.85 Kg suitable for chair verandah as per drawing and all as specified as directed by Engineer Make of PVC Seat - Amko/Brite/Cello/Comfo.

Removing the unserviceable PVC from chair verandah and supply & fixing PVC back 4mm thick sheet made of PPCP material weight not less than 1.85 Kg suitable for chair verandah as per drawing and all as specified as directed by Engineer Make of PVC back - Amko/Brite/Cello/Comfo.

S&F new MS plate in crossing position of bottom side of seat with gas welding duly painted with one coat of red oxide primer and one coat of synthetic enamal paint and all as specified .and directed.

REPAIR TO TABLE COMPUTER(FD/E6/MAP/03 & TP)

Removing of old unserviceable top of table computer and supply and fixing of top made of PLPB (prelaminated particle board) 18/19 mm thick exterior Grade one side decorative choice and other side balancing white lamination confirming to IS specification of size 900x600 duly covered with 4mm thick PVC beading all as specified shown on drawing .

Removing of old unserviceable top of table computer and supply and fixing of top made of PLPB (prelaminated particle board) 18/19 mm thick exterior Grade one side decorative choice and other side balancing white lamination confirming to IS specification of size 1200x900 duly covered with 4mm thick PVC beading all as specified shown on drawing.

Removing old unserviceable key board tray and supply and fixing new key board with 18mm thick pre laminated particle board as per existing pattern including replacement of telescopic channel of 16 gauge all as approved by GE.

Removing of old unserviceable adjustable Buffer and S/F new adjustable Buffer as per approval.

REPAIR OF LECTURE STAND STEEL/WOODEN(FD-1022)

M&L for repair & replacement of lecture stand top with 18/19mm thick PLPB exterior grade with one side decorative choice lamination and other side balancing while lamination confirm to IS specification with teak wood beading 18 x 6mm thick duly finished and polishing including tightening of frame all as specified and shown on drawing.

Description all as per item No 5.10 above but replacement of Sides

Description all as per item No 5.10 above but replacement of Front

Description all as per item No 5.10 here-in-before but replacement Shelf

CHAIR WRITING(FD/E6/ MAP/12) : M&L for repair & replacement of the following components of chair writing as directed by Engineer-in-charge.

Removing of existing old worn out/unserviceable tapestry cloth from with seat and back and providing new tapestry cloth over with and including new polyurethane foam cushion 50mm thick and shall be moulded with density 50-55 complete all as directed by Engineer-in-charge.Make of foam:-Raj foam/U foam/Sweet dream

Removing existing broken arms handles and S&F new arms handle PP as existing as directed.

CHAIR SCHOOL WITH HAND REST/CHAIR WRITING WITH WRITING PAD(FD/E 6/ MAP/15 & Eezy CH-219)

Removing of old unserviceable seat & back of one piece PVC blow plast and S & F new seat & back make Neel Kamal/Cello

Removing of old unserviceable writing pad of size 300mmx200mm made to shape as per existing of 18/19 mm thick prelaminated particle board with PVC beading all around the writing pad of Chair School.

S&F in replacement where ever required by cutting 25mm dia MS pipe of steel frame of chair, 1.6mm thick duly painted with two coats of synthetic enamel over a coat of red oxide primer complete all as directed by Engineer-in-charge.

M/s Manish Contractor

M/s R.D. Company

Bhadauria and Brothers

NITIN TRADERS

M/s Raghav Traders

M/s Pal Construction

Bidder Name

NITIN TRADERS