Loading…
Loading…
Tender Value
Refer Docs
Closing Date
14 Jul 2026, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
LP
3 conditions · 1 needing a document upload
Bulk orders will be awarded to suppliers who have supplied same or similar type of items to any Indian Railway production unit or Zonal Railways, either through single or multiple Purchase orders, in the last three financial years and the current financial year up to the tender closing date. Firm must attach documentary evidence of their successful supply performance along with offer, including copies of Receipt Notes, Inspection Certificates, and Completion Reports, etc., along with their offer, failing which the offer may be rejected.
I/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of Contract (last version) and upon the terms of the Revised special conditions and Instructions for the Guidance of the Contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 12 of August 2018.
Procurement from (OEMs) manufacturers or authorized agent/dealer: 2.0 Either OEM should quote directly or OEM can authorize and give Tender Specific Authorization to its Agent / dealer to quote on their behalf. 2.1 The authorized dealer should submit valid tender specific authorization, along with the offer, failing which their offer will be liable to be passed over. 2.2 Trader / Authorized dealer should mention name of Manufacturer along with complete address for inspection of material at OEM Premises in line with Instructions to Tenderers and General Conditions of Contract VERSION 2024 or latest with all revisions and corrigendums issued before tender closing.
27 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
as per R B letter no. 200/RS(G)/779/7Ptl dtd 29.06.2017 para d , the order can be placed even on unapproved vendor if the rates offered by approved sources are unreasonably high. The para d of the above mentioned R B letter is reproduced below:- With regard to Boards letter reffered at (iii) above, in suspected cartel situations or where available rates from approved sources are adjudged unreasonably high, despite fair efforts as permissible after recording reasons, Railways may consider placing orders outside Approved venders list, even beyond prescribed limits, if any, subject to rates being reasonable and firms otherwise considered capable.
SPECIAL INSTRUCTIONS:-1 As per IRS conditions of the contract.
2 conditions
Technical and commercial deviations, if any, must be quoted in relevant column Specified while submitting the bid. Any deviation in offer quoted anywhere else in the Tender or in uploaded documents, shall be ignored and contract shall be placed after Ignoring such deviations, which will be binding on the firm
Type test certificate from NABL or any other Govt. agency Lab report shall be attached along with the offer without which offer will be rejected.
1 location across Maharashtra · 9 Numbers total
Set of Analog dial bore gauges
52265891~SR
52265891
Limited - Indigenous
Goods
Maharashtra
₹0
Exempted
14 Jul 2026
2 Jul 2026
1 item · 9 Numbers total
Supply, termination Installation, testing and Commissioning of Ventilation system in Paint sh op of Lower Parel Workshop along with complete installation Of industrial air blower with movable trolley, o perating voltage 190V AC TO 380 V AC, 50 Hz, single/three phase supply, maximum power consumption sh all be less than 600 WATT, maximum speed of 400 rpm, air flow of 700 meter cube per minute, weight shall be less than 60 kg and noise shall be less than 50DB. Size of blower shall not be more than 1500 mm diam eter confirming to IS 6272-1987 or latest All electrical works shall be carried out in accordance with the pro vision of Indian Electricity Act 2003 and Indian Electricity Rules 1956 amended to date and All the safety co des and procedures outlined in the safety codes shall be complied with General and safety requirement sha ll be governed by IS 13947 (Pt 1) 1993 and IS:8623/1993, amended to date. termination of all cables shall b e done with bimetallic terminal connector suitable for 2.5 dia Aluminium tubular busbar for 20A copper pal m Copper Cu ETP CW 0041A and Aluminium barrel Aluminium AL 99.5 cable connector temperature resilien ce, corrosion resistance size: 2.5 sqmm confirming to IS: 5561-1970 with maximum temperature rise of 90 degree Celsius. Materiat shall be confirmed to designation A6 of IS: 617-1959. Breaking Resistance for Barr el 85 N/M SQ M and for palm 225 N/M SQ M with Stretching A5% for barrel must be for palm 2.5. Type test certificate from NABL or any other Govt. agency Lab report shall be attached along with the offer without w hich offer will be rejected. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TL/PL, WR | Maharashtra | 9.00 Numbers |
| Total | 9 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .