ADDN ALTN TO DETT COMPLEX AT AFS UNDER GE AF TECH AREA AGRA

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 at any depth complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for glazed ceramic coloured tiles joint free of size 350x250 x 7 /450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Providing & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistanceedged GRG thick square edged of 99%, NRC 0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with incl 15mm thick screed bed in CM 1:6 laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all complete as specified and directed.

M&L for 10 mm thick Vitrified ceramic tiles,Dark shade shade/ double charged (square/recangular) area of each tile n exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.Note:-Any of Make among Kajaria/Nitco and equivalent tiles of premium quality will be procured as per direction by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and paving exc 15 cm thickness (below or above ground) complete all as specified and directed.

M&L for 100mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 ( using 20mm graded stone agg) 50 mm thick as in floor,coping etc complete all as specified and directed.