Loading
Loading…
Loading…
Tender Value
₹42.5 L
EMD Value
₹85,100
Closing Date
5 Jun 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
TENDER
13 conditions · 2 needing a document upload
No Financial credentials are required for tenders having advertised value up to Rs.50 lakhs.
No Technical credentials are required for tenders having advertised value up to Rs.50 lakhs.
26 conditions · 2 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make in India) Policy: This tender complies with Public Procurement (Preference to Make in India), Order 2017-Revision dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Govt. of India (herein referred to as PP-PIM), circulated vide Ministry of Railways (Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671) dated 20.08.2024, and all its amendments. Only Class-I local suppliers (as defined in PP-PIM) shall be eligible to bid for list of items specified in Ministry of Railways (Railway Board)'s letter no.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For other items, only Class-I and Class-II local suppliers are eligible to bid. At the time of bidding, each bidder is required to indicate percentage of local content (as defined in PP-PIM) and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be. If this self-certification is not submitted, the bid will be summarily rejected. For contracts above Rs.10 crores, the provisions of Para 9(c) of PP-PIM shall be additionally applicable. For the purposes of this NIT, the "local content" (as defined in PP-PIM) requirement to categorize a supplier as "Class-I local supplier" is minimum 50% and for "Class-II local supplier" is minimum 20%. Also, the Margin of Purchase Preference (as defined in PP-PIM) is 20%. The procedure for preference to Make in India shall be as specified in PP-PIM. Uploading of self-certificate for meeting the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be (proforma attached). Non-submission of this certificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
HAS - MAJN section replacement of over aged overhead line & faulty UG cable and pumping arrangements under HMRDC section.
Y-E-29-2026-27-22
Y-E-29-2026-27-22
Open
Works - General
120 Days
Dharwad, Karnataka
₹0
₹85,100
5 Jun 2026
15 May 2026
22 May 2026
67 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 42,52,691.45 | ||
| — | 2550.00 | — | — | ||
| Laying of 4x16 - 35 Sq mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 24,556.5 | |
| — | 2200.00 | — | — | ||
| Laying of 4 x 50-240 Sq mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc | — | — | — | 47,828 | |
| — | 2850.00 | — | — | ||
| Supply and laying of 75 mm Diameter PE 80 HDPE, PN 4 Pipe for safety of cables including all the ends should be sealing with bituminous compound. | — | — | — | 3,39,634.5 | |
| — | 500.00 | — | — | ||
| Supply & erection of HDPE pipe of 110 mm dia, PN-6, PE-100 of material grade as IS 4984 or latest as per instructions of engineer at site. | — | — | — | 2,37,075 | |
| — | 110.00 | — | — | ||
| Supply and Fixing of GI pipe 'B' class of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 88,881.1 | |
| — | 2100.00 | — | — | ||
| Excavation of cable trench, 450 mm. wide and 1000 mm. deep in all types of soil and refilling the cable trench to its original position. | — | — | — | 3,21,363 | |
| — | 200.00 | — | — | ||
| Excavation of cable trench below the Rail Track/Road/Tiles 450 mm. wide and 1000 mm. deep in all types of soil and refilling the released ballast/refilling concrete/Tiles to bring back to original surface. | — | — | — | 52,722 | |
| — | 200.00 | — | — | ||
| Platform surface/concrete cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of tails / soils / re-plastering of excavated trench with cement to bring back to its original shape. | — | — | — | 1,49,598 | |
| — | 900.00 | — | — | ||
| Excavation of Trenchless duct using horizontal drilling in all types of soil for laying of LTUG/HTUG cable across the track/road. | — | — | — | 14,28,615 | |
| — | 20.00 | — | — | ||
| Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. | — | — | — | 11,559 | |
| — | 10.00 | — | — | ||
| Supply and fixing of LT cable terminal LILO box (Min size 300 x 230 x 120 mm) with Hinged door with 32 A strip connector. | — | — | — | 21,081.6 | |
| — | 28.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stencilling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 1,61,949.2 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 4 Way Double Door FP MCB Distribution Board with following switch gears (All 'C' Series) FP 63A MCB -1 Nos., FP MCB 25 A-3 Nos., with required suitable hardware and internal wiring complete. | — | — | — | 11,563.25 | |
| — | 2.00 | — | — | ||
| Design Fabrication supply, fixing testing and commissioning of L.T control panel of suitable size made up of 16 S.W.G CRCA sheet, angle frame, duly powder coated with double door and locking arrangement on suitable size plinth/ foundation (plinth should be minimum 1 feet below surface level and 1 meters above surface level) with MS "C" channel with nut bolt,100A Aluminum bus bar with following switchgears (All C Curve)- 63A 4Pole MCB - 02 No., 32 A 4 Pole MCB-02 No. | — | — | — | 43,087.58 | |
| — | 4.00 | — | — | ||
| Supply, fixing and commissioning of Time lite Distribution Board - Time lite 32 A 3 pole / 230V-Digital time switch similar to M/s Indo Asian CatrefTL032DB0 or with latest specifications and as per site requirement. | — | — | — | 85,294.4 | |
| — | 13.00 | — | — | ||
| Provision of outdoor type LT kiosk board, water tight weather proof double door locking arrangement with alum. Bus bar supporting PVC bushes/fasteners on hylum sheet with grey enamel paint, provision of GI pipe for incoming and outgoing LTUG cables bottom entry painting of names/stickers, LT board shall be mounted on Cement concrete plinth min size 1000x800 mm & above ground level 400 mm with MS "C" channel with nut bolt, 63A 4 Pole MCB, 2 Nos domestic and street light 32 A MCB for street light 2 nos. complete. | — | — | — | 2,60,377.65 | |
| — | 3.00 | — | — | ||
| Supplying and fixing 8-way, Double door, double pole (DP), sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as per site requirement. | — | — | — | 7,853.31 | |
| — | 3.00 | — | — | ||
| Supplying and fixing 50 A to 63 A rating, 415 V, 10 kA, "C" curve, FP miniature circuit breaker suitable for inductive load of in the existing MCB DB complete with connections, testing and commissioning etc. as per site requirement. | — | — | — | 7,322.22 | |
| — | 36.00 | — | — | ||
| Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, Double pole (DP) miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as per site requirement. | — | — | — | 24,026.76 | |
| — | 6.00 | — | — | ||
| Supply and provision of DP RCCB of 25 A rating having sensitivity of 30 mA with all other connected accessories. | — | — | — | 12,985.68 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of fabricated Feeder Pillar distribution box made of MS sheet 1.6 mm thick size 600x300x600mm with suitable MS stand Copper bus bar of 200 A capacity and 2 x 63 A MCB 4 pole including all other necessary accessories complete. | — | — | — | 9,621.6 | |
| — | 2.00 | — | — | ||
| Supply, fixing, installation and commissioning of 8-way FP Double door Distribution board to control all-night and part-night light circuits in platform with following switch gears (All 'C' Series) FP MCB 100A-1 No., DP MCB 63A-1 No., DP MCB 32A-1 No., DP MCB 16A-2 Nos. along with Supply fixing and commissioning of 02 Nos. Digital Timers with 02 Nos. Automatic Modular Contactors along with 1 No. TYPE 2 AC FP surge protection device with required suitable hardware and internal wiring complete. | — | — | — | 69,832.56 | |
| — | 2.00 | — | — | ||
| Supply, fixing and commissioning of FP 4 Way Double Door Distribution Board with following switch gears (All 'C' Series) FP 63A RCCB having sensitivity 300 mA 10KA Short circuit capacity-1 Nos., FP MCB 63 A-1 Nos., SP MCB 16A-2 Nos., SP MCB 6 A-1 No. with required suitable hardware and internal wiring complete. | — | — | — | 39,636.12 | |
| — | 2.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way DP Double Door Distribution Board with following switchgears (All 'C' Series) in comer 40 A DP RCBO sensitivity 30 mA-1 Nos. and outgoing SP MCB 6-32A 10 Ka - 10 Nos. with required suitable hardware and internal wiring complete. | — | — | — | 20,255.26 | |
| — | 4.00 | — | — | ||
| Supply, installation, testing & commissioning of centrifugal type vertically multistage bore-well submersible pump as per the following technical specification. The Pump model QF duty point will be Flow 120LPM @ working Head 110 Mtr. The Pump design will be the Flow Range starting from 15 LPM to 130 LPM & Head Range of 150 Mtr. To 82 Mtr. Pump material to be like, Pump impeller-SS 304, Pump casing-SS 304, Pump Shaft- SS410 steel, Pump motor body- SS 304. The pump motor should be 5 HP BEE 5 star rated with warranty which will operate through 415V-AC/50 Hz standard power supply. The motor manufacturing and testing as per IS 8034-2018 or latest similar to Make CELVIN Model STKTP620 or with latest specifications or as per site requirement. | — | — | — | 1,64,900 | |
| — | 1.00 | — | — | ||
| Supply, fixing / replacement, testing and commissioning of BEE 5-star rating and energy efficient mono block submersible pump 7.5 HP capacity, 3 phase Pump for suitable for working with 415V AC, 50Hz complete as per site requirement. Including all other necessary labour, tools, accessories complete. | — | — | — | 33,771.6 | |
| — | 5.00 | — | — | ||
| Supply, fixing, testing and commissioning of 3 phase Submersible Pump control panel double door outdoor type made of 20 SWG Sheet steel with locking arrangements provided with (i) DOL Starter with Auto Switch, 3 Position Selection (Manual - Manual SPP - Auto) including volt meter, ammeter, LED pilot lamps BCH make, Cat No. CPEYSAGZ, (ii) FP MCB-32 A for short circuit protection, (iii) Time Switch Minilec Make, Model-S2 TSR 1, (iv) Water Level Controller- Minilec make, Model-WLC D1, (v) Current Sensing Phase Failure Relay with selectable Dry Run & Overload Protection Minilec Make, Model-SPG D2 or with latest specifications. or as per site requirement. | — | — | — | 80,125 | |
| — | 2.00 | — | — | ||
| Supply and testing of BEE 3 star and above rated and ISI marked bore well submersible motor pump set 3 HP single phase 240 volt. AC 50 Hz. | — | — | — | 45,430 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of 3 HP Starters Control Panel for Submersible Pump suitable for Single Phase/230v/50Hz with all other necessary accessories complete. | — | — | — | 11,330 | |
| — | 300.00 | — | — | ||
| Supplying & fixing PVC insulated PVC sheathed copper conductor submersible 3 Core 4.0 Sq mm Flat Cable, ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. | — | — | — | 55,800 | |
| — | 300.00 | — | — | ||
| Supplying & fixing PVC insulated PVC sheathed copper conductor submersible 3 Core 6.0 Sq mm Flat Cable, ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. | — | — | — | 79,800 | |
| — | 600.00 | — | — | ||
| Supply and fixing of heavy-duty uPVC column pipe coupler of 40 mm dia, pressure 35 kg/cm2 with collars and other required suitable accessories complete. | — | — | — | 2,78,694 | |
| — | 4.00 | — | — | ||
| Liaison work with EB officials in getting Power supply - making Agreement; Commissioning work exclusive of EB Deposit work. | — | — | — | 26,121.56 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Booklet
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
AdvanceCorrectionSlips1-11toGCC-2022.pdf Advance Correction Slips to GCC
ATTACHMENT
AdvanceCorrectionSlips1-11toGCC-2022.pdf
ATTACHMENT
TB-HAS-MAJN-replacementofoverheadlinefaultyUGcabl.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .