Thorough renovation and relocation of Animal House at Pharmacy, Ground Floor, Jadavpur University Main Campus.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (b) above 150 mm. thick Page 10 of 315 Item - 2/b

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed Page - 3rd CORRIGENDA 49 of 96 / Item - 1/i/a

Cement concrete (1:1.5:3) with graded stone chips ..... And scaffolding complete as per direction of Engineer-in -charge. Page 18 of 96 Item 3 Corri / 46/b

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing Page - 11 of 315 Item - 10

Supplying Santras for Taking out heavy iron grated window with locking arrangement after cutting out from walls Page 303 of 315 Item - 13

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor Page - 3rd corrig 01 of 96 / Item - 3/ b

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) Page - 198 of 315 / Item - 5

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering Page- 24 of 315 / Item 4/a

Single Brick Flat Soling ...................................and filling joints with local sand. Page - 3rd CORRIGENDA 1 of 96 / Item - 1

(A) Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed and consolidating the same by thorough saturation with Page - 2 of 315 / Item - 4 / A

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Page - 3rd corrig 91 of 96 / Item - 10 / i

M.S. works in brackets made from flats, angles, tees etc. to sizes ……… bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) Page - 3rd CORRIGENDA 89 of 96 / Item - 6

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smootheningsurfaces by sand papering etc Page 196 of 315 / Item 10

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Page - 201 of 315 / Item - 4 / ii

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc Page - 200 of 315 / Item 2/A /iv

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm ………. Page - 124 of 315 Item - 11/a

Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete. ii) 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick Page - 146 of 315 Item - 33/a/ii

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: Page - 144 of 315 Item - 26 / viii

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and …….. Page - 145 of 315 Item - 28 / (iv)

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed …… Page - 145 of 315 Item - 29 vii

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete Page - 143 of 315 Item - 16/b

(i) Door stopper.(Brass) Page - 143 of 315 Item - 19 / i

Supplying Carpenter for wooden work with accessories fittings. Page - 303 of 315 Item - 5

Supplying and laying true to line and level vitrified tiles of approved brand ..... (White cement, synthetic adhesive and grout material to be supplied by the contractor Page - 3rd CORRIGENDA 36 of 96 / Item - 23 / A

Supplying, fitting & fixing 1st quality Ceramic tiles ......... necessary or by synthetic adhesive & grout materials etc. (B) Wall (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative Page - 3rd corrig 34 of 96 / Item - 22/B/b/i

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the ………….. direction of Engineer in charge Page - 12 of 315 Item - 13

Supplying of Mazdoor ( Male ) for damages windows shifting and others related works Page - 303 of 315 Item - 3

Supplying, fitting and fixing in position 10-15 micron and anodized (mad finish IS-1855-199 ) heavy duty aluminum door & window for any floor (a) sliding window Analysis rate ref tender no : C-61 /11-12