Purchase of OFFICE FURNITURE FOR BPD SECTION , 2ND FLOOR, D WING ,VANBHAVAN BUILDING, CIVIL LINE NAGPUR

Amount

WISH SPINE FIN Size :- 1350x600

52 mm thk. 1200mm ht. panel based work station partition with flexible construction offering various functional and decorative finishes as well as cable management capacity. All trims made of aluminium extrusions. Blocks made out of a composite construction of MDF and paper honeycomb.Panel Blocks made of Fabric Tackable , white board .Tiles should be slide in to the panels from top before fixing the top horizontal. These tiles should be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. Bottom tile and leg made of Mild steel with epoxy powder coated.Fabricated bottom frame as a welded structure of steel components. The panels and worktops are supported with MS legs with levelers at various locations depending on the layout requirements.Work top shall be made of 25mm thick Pre laminated particle board interior grade of approved Architect shade conforming to IS: 12823. Bottom shall have a backing laminate of minimum 0.6 mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping. Fabric magnetic tiles are fabric upholstered metal tiles in 0.6 mm thick G.I. Grade.Fabric tack tiles are fabric upholstered metal tiles in 0.6 mm thick G.I. Grade, with P.E. Foam in the tile for tack ability / acoustics.Plain Metal tiles are made of 0.6 mm thick M.S. CRCA Grade D as per IS: 513 powder coated with Epoxy- Polyester finish.White board tiles are made of 8.0 mm thick particle board laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick PVC edging.Glass tiles 4 mm thick toughened clear glass is fitted onto both sides of the panel using horizontal and vertical stiffeners made from 0.6 mm powder coated CRCA steel Grade D as per IS: 513.

METAL KBPT WITH MOUSE TRAY

Metal Tray - Tray is made of 0.9 mm thick MS Sheet CRCA. (Size: 482(W) x 280(D) x 40(H) MM).

CPU TROLLEY

Metal Tray - Tray is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet. Non lockable twin wheel castors are injection moulded in Black Nylon. Size :- 230mm W -345mm W X 226mm D X 180mm H

NOVA FREE STANDING PEDESTAL WITH FLAT METAL FRONT

NOVA FREE STANDING PEDESTAL WITH FLAT METAL FRONT OF SIZE 390W X 435D X 646HT, 3DR = 2 BOX + 1 FILE, CENTRAL LOCKING.Welded construction made of 0.8mm thk CRCA steel for Body Shell, Drawer front & Tray with wooden facia,1.2 mm thk for front side stiffener , Rear side stiffener & Bottom,0.8 mm thk metal straight edge top, Powder coated to the thickness of 50 microns,Drawer fronts should be in metal front straight edge.

Overall Dimensions of VSDU - 12 shall be 1200mm(W)x450mm(D)x1168.5mm(H). The top shall be Metal top (1 mm add in unit height ) . The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 12 shall have 4 no. of adjustable half shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 12 - A4 size box file can be stored vertically on two shelves and clear space above third shelf is 295 mm . Bond white colour finish. Overall Dimensions of VSDU - 12=1200mm (W)x450mm(D)x1168.5mm(H).

MEDIUM MESH BACK CHAIR Back:46.0 cm (W) x 63.0 cm (H) Seat:45.0 cm. (W) x 50.5 cm. (D) Overall Dimensions of Chair : Seat Height-min 42.1cm-max 52.1cm Height- min 90.5cm - max 100.5 cm Width & Depth of Chair as measured from pedestal - Width-76.1 cm and Depth-76.1 cm.

1) SEAT ASSEMBLY: The seat assembly should be made up of 1.5±0.1 cm. thick hot pressed plywood upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 45.0 cm. (W) x 50.5 cm. (D) 2) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 ±2 kg/m3/ and Hardness 16±2 kgf for 25% compression. 3) BACK ASSEMBLY: The back should be a fabricated tubular frame assy, designed with contoured lumbar support for extra comfort, powder coated ( DFT 40-60 microns ) & upholstered with a high tenacity Polyester mesh fabric. The M.S. tubular frame should be made of ∅1.9±0.02 cm x 0.2±0.016 cm MS ERW Tube. BACK SIZE:46.0 cm (W) x 63.0 cm (H) 4) ARMRESTS: The armrests should be made of plastic injection moulded nylon. 5) CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: •360° revolving type. •Upright position locking. •Tilt tension adjustment. •Seat/back tilting ratio of 1:3 6) PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 10.0±0.3 cm. 7) PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon 66 and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be 66.1±0.5 cm.(76.1±1.0 cm with castor). 8) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in recycled compounded Nylon having 5.0±0.1cm wheel dia and assembled to pedestal 9) Overall Dimensions of Chair : Seat Height-min 42.1cm-max 52.1cm ; Chair Height- min 90.5cm - max 100.5 cm ; Width & Depth of Chair as measured from pedestal - Width-76.1 cm and Depth-76.1 cm.