ADDN/ALTN/IMPROVEMENT TO AIRMEN BILLETS AT 28 ED AF STN AMLA

Amount

Excavation in trenches n exc. 1.5m wide & n exc. 1.5m in depth for foundation etc. and getting out in soft / loose soil complete all as specified and directed.

Material and labour for plain cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) in door and windows frames, any size, single or double rebated, including ar?rangement for fixing of hinges and fixtures as required complete all as specified and directed.

Material and labour for providing precast cement ,type B-1 ,1:2:4,(20mm graded stone aggregate) concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match in CM 1:4 complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for . water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Material and labour for Cement concrete type D-2 ,1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete

Material and labour for reinforced cement concrete (Nominal mix), Type B-1, 1:2:4 (using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

M&L Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with modular size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and dirceted.

Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Cutting holes in to brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete,Superficial area not exceeding 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

Material and labour for Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Taking down Chowkat or frames Exc 1.5 sqm but not exc 4 sqm each(without taking off shutters from the frames) and refixing in other openings complete all as specified and directed .

Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) and refixing in other openings complete all as specified and directed

Supply and fixed 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed.

Supply and fixed 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

Supply and fixed second class hard wood small fittings such as shaped door and window stops, brackets of any type, latches, hings blocks and the lile, articles not exceeding 200 cucm complete all as directed.

Supply and fixed Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixed150mm long aluminium anodised barrel tower bolts of extruded section (SI marked) complete all as specified and directed

Supply and fixed 150mm long size extruded aluminium alloy handles, cast type anodised (ISI Marked) complete all as specified and directed.

Supply and fixed 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed.

Supply and fixed door closer hydraulically regulated designation No.2 universal type,suitable for door shutters of 701 to 850 mm width and of wt 36 to 60 kg.Aluminium (Die cast) complete all as specified and directed

Supply and fixed 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed

Supply and fixed 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

Supply and fixed 4 lever brass Locks, cupboard, grade I, size 75 mm, with escutcheon plates and two keys complete all as specified and directed.

Supply and fixed 19mm dia heavy weight Harrison/curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed

Supply and fixed steel window with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

All as per item no 27 above but without glazing bars complete all as specified and directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Supply and fixed Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etccomplete all as specified and directed

Supply and fixed Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

Supply and fixed for rolled mild steel angles conforming to Fe 410-w (Gde-E-250) quality A, as in frame work for door frame including flat iron hold fasts, all cutting, welding, finishing, etccomplete all as specified and directed

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed.

Supply and fixed Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

Supply and fixed Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality-A, including distance pieces, cleats etc complete all as specified and directed

Material and labour for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed.

M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 Type B-2 (40mm graded agg ) , as in top layer including Finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed

Material and labour for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick rendering in cement mortar 1:3, on ceiling finished even and fair complete all as specified and directed.

Material and labour for two coats of oil emulsion distemper on wall newly plasterd surfaces over a coat of chalk white primer complete including prepatation of new surfaces complete all as specified and directed.

Material and labour for providing and applying plaster of wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Material & labour for applying one coats of distemper oil emulsion on wall after preparation of old surface by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.

Material & labour for applying one coats of white wash on ceiling after preparation of old decorated plastered or unplastered surface on walls include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

Supply and fix sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each panes in steel window complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of redoxide including scaffolding where required for external painting complete all as specified and directed.

Material and labour for for 4mm dia GI wire fixing to angle complete all as specified and directed.

Demolition of cement concrete ( unreinforced) as in ground floor and paving not exc 15 cm thickness below or above GL complete all as specified and directed.

Material and labour for surface excavation n.exc 30cm deep and averarging 10cm deep and getting out soft/loose soil as in dressing of shoulder /berm cutting etcand removing excavated material n.exc 50m and depositing where directed complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Material and labour for broken stone or bolders ,Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fixed roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410 -W (Gde- E- 250) quality-A, including distance pieces, cleats etc complete all as specified and directed.

Supply and fixed pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:2:4 Type B-2 (40mm graded agg ) , as in top layer including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Material and labour for preparing for new surfaces of walls and applying two coat of cement base paint over a coat of primer including use of scaffoldings complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete along with fittings and fictures such as switches sockets ceiling Rose point light fittings etc and making good the surface on wall complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per is with 1.5 sqmm to single core PVC insulated but unsheathed FRLS cable,1100 volts grade, ISI-694 marked with multi standard copper conductor and Earth continuity wire with similar 1.5 square mm cable (including connecting to earth Dolly) drawn through ISI marked heavy duty rigid PVC concealed conduit with all accessories etc with mild steel sunken box 50 mm deep, 1.6 mm thick with earth dolly duly,concealed in wall and having modular cover plate with frame suitable for modular switch/sockets/regulators for the following:

one light point controlled by one switch one way complete all as specified and directed.

one fan point controlled by one switch one way complete all as specified and directed.

one light point controlled by two 2 way switch complete all as specified and directed.

Socket outlet 05 Amp on same board complete all as specified and directed.

Socket outlet 05 Amp on independant board complete all as specified and directed.

All as per Item No : 60 point wiring with 2.5 sqmm single core copper cable and earth continuity wire with 2.5 sqmm single core cable for one three pin15 Amp socket outlet point on independent board complete all as specified and directed.

Supply and fixed modular switch 01 way 6 Amp, 01 module complete all as specified and directed.

Supply and fixed Modular switch 02 way 6 Amp, 01 module complete all as specified and directed.

Supply and fixed Modular switch 01 way 16 Amp, 01 module complete all as specified and directed.

Supply and fixed Modular socket 6 Amp, 02 module complete all as specified and directed.

Supply and fixed Modular socket 6/16 Amp, 02 in 01, 02 module complete all as specified and directed.

Material and labour for replacement modular step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz supply complete all as specified and directed.

Supply and fixed ceiling Rose surface bakelite 3 terminals 65X50 mm, 230 volts including PVC box of size 3" X 3" round type complete all as specified and directed.

Material and labour in repairs for sub main wiring with approved color coding as per IS with single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked drawn through concealed heavy duty ISI marked rigid non-metallic PVC conduit of suitable size with all fitting accessories including taking down old unserviceable submain wiring and making good the disturbed surface of wall etc complete all specified for the following size of cable Note: 3 run of FRLS cable & one run of heavy duty rigid PVC conduit shall be measured as single unit

2 runs of 6 Sqmm size main cable and one run of 6 Sqmm size earth continuity conductor complete all as specified and directed.

Supply and fixed in repair for wall mounted LED 20 Watts CRCA fitting 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integral electronic driver connector block etc complete with all accessories internally provided including necessary mounting , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including necessary LED tube 4FT 20 Watts complete all as specified and directed.

Supply and fixed for MCB DB TPN 4 way double door sheet metal enclosure comprising of 200 Amps, 415 Volts, 50 Hz busbar and neutral link complete including inserting in wall complete all as specified and directed.

Supply and fixed in repair for MCB DB SPN 12 way double door sheet metal enclosure with OEM specified common busbar and neutral link complete to fixtures complete all as specified and directed.

Taking down Ceiling fans of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling, greasing including providing flexible cable from ceiling rows to connector of fan complete all as specified and directed.

Taking down Exahust fans of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling, greasing including providing flexible cable from ceiling rows to connector of fan complete all as specified and directed.

Supply and Fixing connecting and testing of ceiling fan size 1400 mm sweep single phase, 230 Volts complete, Make : Bajaj/Usha/Havells with suitable length of down rod as per ground condition complete all as specified and directed.

Supply and fixed for MCB triple pole and neutral 415 Volts, 63/100 Amps, 10KA complete all as specified and directed.

Supply and fixed for 'C' curve MCB single pole & neutral 240 Volts 40 Amps complete all as specified and directed.

Supply and fixed for 'C' curve MCB single pole & neutral 240 Volts 6 to 30 Amps complete all as specified and directed.

Supply and fixing water heater(Geyser) storage type(Vertical) of capacity 25 Ltrs, energy saver/energy-efficient 5-Star rating, 230 Volts, 2KW element single phase AC supply, inner tank made out of heavy duty stainless steel sheet glass line coated, having pressure release valve, non return valve, and drain valve, thermostat with auto cut off etc, hanging on wall with 04 Nos Steel fasteners 10mm dia 100mm long and making good the distributed surface as per existing surfaces, including electric,earthing and water connection to geyser and testing on load (Filled with water) up to entire satisfaction of Engineer-in-charge/ JE complete all as specified and directed. Note : (i) Srl Number of geyser and 'GE AF Amla' shall also be writing on geyser with red colour permanent marker, which will be issued by Engineer-in-charge and cost for the same shall be deemed to be included in the quoted unit rate, nothing shall be paid extra on this account. (ii) Geyser installed/hanging at various locations as directed by Engineer-in-charge with the Jurisdiction of GE AF Amla (from market to AGE E/M store / AGE E/M store to sites/Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.

Supply and fixed in repair GI pipe bracket bent to shape drilled/welded made out of 20 to 40 mm dia bore light grade GI Pipe 0.9 metre long for fixing of building security light fitting of any type and description including suitable size of MS clamps, nuts, bolts and washers including two coatt of Aluminium paint over one coat of red oxide primer complete all as specified and directed

Supply and fixed in repair for environment friendly high efficiency with better thermal management type building security light 25W with integral electronic driver connector block etc complete with all accessories internally provided including necessary mounting arrangement, provision of 2 core 1 Sqmm multi strand copper conductor from ceiling Rose to fitting complete all as specified and directed MAKE :-Cat Part No ASTRA LSTS-25-CDL-M of Crompton,Edqe Plus series 169826 BRLEP 25W LED WH of Bajaj, ENDURACITYLITEPLATSL25WLED757SASYBOPC of Havells

Material and labour for earthing complete with galvanized steel Earth plate electrode 60 cmX60 cmX6 mm thick buried directly in ground vertically (earth but not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50m deep below normal ground level, connecting to GI Earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 15 mm dia light grade protection pipe for earth lead complete with charcoal and common salt in alternate layer including watering arrangement with galvanized iron pipe medium grade 20mm dia ,PCC chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in in any type of soil/strata and testing on completion. Note: Gi Earth wire 4mm dia and 15 mm dia protection pipe up to 7.5 m from earth plate is Deemed to be included in rate quoted.)

Note : The amount against Schedule of Credit on Page No. 40 shall be deducted from the total amount quoted against Sch 'A' while deriving Item Rate for Acceptance.

Vee kay construction

SHIV SHANKAR MISHRA

M/s Shrangi Rishi Construction