Thoothukudi District TN Tut 05 2026 27 Construction of Community Hall at Melasekkarakudi Village in Sekkarakudi panchayat in Karungulam Union

Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary.

Supplying and filling in foundations and basement with filling sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications.

FlyAsh Brick work in Cement 1:5 mix using country Bricks of size 23x11.5x7.5cms for the following including mixing mortar and all other labour charges etc. complete.

Filling with Collected Gravel including all labour charges etc.

Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations (Below Ground level)

Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations (Above Ground level)

Supplying, fabricating and placing in position mild steel or ribbed to steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete.

RCC 1:1.5:3 using 20mm HBG metal including cost and conveyance of materials and labour charges etc. complete

Weathering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid over into a single layer and cons

Finishing the top of the roof with one course of Machine PressedTiles of size 23 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement us including all charges etc.

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with CM 1:5 mix 12mm thick including cost and conveyance of all materials to site and labour charges etc. complete.

Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly compl

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats with Interior Emulsion & Exterior Emulsion using best quality of Emulsion, Brushs, scaffolding charges etc. complete

Painting two coats over new iron work using synthetic enamel paint including cost and conveyace of all materials to site etc. complete.

Provision for Cuddapa Slab 40mm thick including all charges etc.

Elactrical(Sub Estimate)

Wiring with2x1.5sq.mm. PVC insulated unsheathed FRLSSC copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AFT switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/ fan point (for electronic regulator) (5pointsper coil)Light Point SD 20

Wiring with 2x1.5 sq.mm. PVC insulated unsheathed FRLSSC copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AFT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/ fan point (for electronic regulator)(5pointsper coil)Fan point SD 20

Supply and fixing of fancy glass shade and 15 W LED Bulb SD-80

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb - SD. 84

Supply and fixing of single box type4'40W fluorescent fitting complete with copper choke and condensor withTW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting SD. 88

Wiring with 2x1.5sq.mm. PVC insulated SCunsheathed FRL Scopper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mmx100mmx113mm TWswitch box with 3mm thick hylem sheet cover for 5A3 pinnoninter locking wall socket with 5A flush type switch with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point.- SD -36.

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link(1"x1/8"copper flat)onTW plank of size 375mmx300mmx19mm with supporting TW reepers of1" thick a neither side with painting with suitable bolt and nuts for fixing theTW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30 MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection SD-129

Supply and run of 2 of 6 sq.mm.(84/0.3)PVC insulated SC unsheathed FRLS coppe rconductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains SD-71

Supply and fixing of 5A/15 A3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheetSD No.141

Supply and fixing of 1200mm (48")AC ceiling fan complete with stepped electronic 300W regulator with 1meter down rod on the existing clamp. SD-110

Supply and run of 2 of 6sq.mm. PVC insulated Scunsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains - SD.66

Septic Tank(Sub Estimate)

Earth work excavation and depositing on bank with in initial lead of 10 mt and initial lift of 2mt in Hard Gravelly soil for foundation as per specification

Cement Concrete 1:4:8 mix using 40 mm ISS H.B.G. metal including cost and conveyence of all materials to site and all other albour charges etc., completed.

FlyAsh Brick Work in C.M 1:5 mix using good quality of country bricks including cost and conveyence of all materials to site and all other labour charges etc., completed.

Supply and errection of steel centering for all R.C.C items of works including hire charges and labour charges for errection etc., completed.

Supplying and fabrication of steel including cost and conveyence of all materials to site and all other labour charges for straightening ,cutting, bending , placing in position tying etc completed.

Reinforced Cement Concrete 1:1.5:3 mix using 20 mm ISS HBG metal including cost and conveyence of all materials to site and all other labour charges etc., completed.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, Plastering with cement mortar 1:5 mix 12mm thick including all cost and conveyance etc., complete.

Plastering with cement mortar 1:3 mix 12mm thick including all cost and conveyance etc., complete.

Supply and filling of 40mm brick jelly including cost and conveyence of all materials to site and all other labour charges etc., completed.

Water Supply(Sub Estimate)

Provision for Indian Water Closet including all labour charges etc.

2000 ltr HDPE tank

Tap pvc (MO 510)

Mirror (600mmx450mm)

110mm PVC Pipe

110mm pvc Elbow

110mm pvc Tee

Wash Basin Colour(MO 544)

25mm PVC Pipes

25mm PVC Elbow

25mm PVC Tee

32mm PVC Pipes

32mm PVC Elbow

32mm PVC Tee

32mm Gate Valve

63mm PVC Pipes

63mm PVC Elbow

63mm PVC Tee

63mm Gate Valve

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information