C/o Atal Adarsh Vidyalaya at Mohal Ghera Dhanet Tehsil Bangana District Una (H.P. )

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual/ mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chieselling , wedging out of rock(where blasting is prohibited) and their intermediate classification of soil , setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-charge at site according to the MORD technical specification clause 302, 1603.1 and 1603.2 and sorting out useful materials and stacking the same in all leads and lifts on acquired width of road and transportation for filling in road ways, camber ,embankments for grade improvements and disposal of all surplus material to required width of the road or to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials ,tool and labour if required. Any loss to the public private property during the course to execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all the cases as per the direction of engineer-in-charge including carriage of material with in all leads and lifts. All useful material such as stone, shingle, sand and slates etecetra shall be sorted out. A recovery of 338.03 cum (Three hundred thirty eight decimal zero eight) stone to be obtained from excavation cutting at the rate of Rs. 600/-(Rupees Six hundred) per cubic metre shall be effected on prorata bases in each running bill for this item. including carriage of material with in all leads and lifts and other incidentals .The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Earth work in excavation by mechanical means (Hydraulic excavator) /mannual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqmt. on plan) etcetera in all kinds of earth work including spade work, pick work, jumper work, blasting work and chiselling/wedging out of rock etcetera including dressing of sides and bed and disposing of excavated earth upto all leads and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge within all leads and lifts depth, including clearing of jungle.Pick Jumper work and than disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per the direction by the Engineer in charge upto all floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Suspended floors, roofs, landings, balconies and access platformas per the direction by the Engineer in charge upto all floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Edges of slabs and breaks in floors and walls under 20cm (twenty centimeter) wide as per the direction by the Engineer in charge upto all floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Fe-500D tor steel reinforcement make of SAIL,TISCO,RINL,JINDAL, PANTHER of JSPL,SHAYAM STEEL as per structural design for reinforced cement concrete work including bending binding and placing in position complete in all height including cost of binding wire upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work finishing and reinforcement work with graded crushed stone aggregate 20mm nominal size in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level upto all height in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Construction of precast reinforced cement concrete mechanically mixed and vibrated precast railing of cement concrete grade M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm2 (twenty five Newton per millimetre square) with cement contents should not be less than 400Kg (four hundred kilogram) per cubic metre with aggregate size not exceeding 12mm (twelve millimetres) and curing complete, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 ( one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm ( two thousand millimeter) resuming adequate space between vertical post for expansion, including the cost of reinforcement and form work complete upto all floor level as per drawing and technical specifications including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying design mix Cement concrete prepared with batch mixing machine of M-30 (M-thirty) grade, in roads/taxi tracks/ runways, using Cement content considered in M-30 is @ 420kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately) including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, Goods Service tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (one cement : five fine sand : ten graded/ crushed stone aggregate 40 mm (forty millimeter) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in foundation and all work upto plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, Goods Service tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( One cement : four coarse sand : eight graded crushed stone aggregate 40mm (forty milimetre) nominal size)mechaniclly mixed and curing complete excluding cost of form work upto all work plinth level including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete M-20 design mix to obtain the compressive strength of 20N/mm² with graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give smooth and even surface with minimum cement contents not less than at the rate of 320 kg (three hundred twenty kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work in all work upto plinth level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 (one cement: three coarse sand: six graded/crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and curing complete excluding cost of centring and shuttering in all work upto plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, Goods service tax, sale tax or other taxes imposed by the Government.

Providing and laying Non Pressure NP-3 class (Medium duty) 900mm(Nine hunderd millimetre) dia reinforced cement concrete pipes including collar/spigot with stiff mixture of cement mortar 1:2 (one cement:two sand) including testing of joints etc. complete as per the direction by the Engineer-in-charges, including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing weepholes in brick masonry/ stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm(hundred milimetre) dia PVC pipe make of (D-plast) / Finolex, ) having working pressure not less than 4.00 (four ) kg/cm² extending through the full width of the structures with slope of 1(v):20(H)(one vertical twenty horzontal) towards drawing face complete as per drawings and MORD technical specification, including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Construction of Hill side drain in accordance with the requirement of specification to lines and grades dimensions and other particular as per drawing and technical specification in C.C 1:3:6 with 20mm nominal size with thickness of concrete as 10cm size 45 x 25 cm including cost of earth work in all kinds of soil and cost of form work with steel plates as per MORD specification including construction of in all leads and lifts as per direction of Engineer-in-Charge, including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Stone soling properly hand packed filling interstices with kharanja stone and consolidating with power road roller to the required gradient and camber including watering and rolling and binding material,including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Back filling with stone/boulder behind return wall, abutment, wing wall and retaining walls complete as per drawing and MORD technical specifications and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections/framed work approved make TATA/JINDAL, Panther of (JSPL), Sail, Shyam Steel, Tisco including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Balwant Singh

Shiv Kumar Govt Contractor

Ramesh Chand Sharma