SPECIAL REPAIR TO BLDG NO. P-2 AND P-3 SINGLE MEN (ORS) ACCN UNDER GE NARANGI

Amount

BUILDING WORKS: Dismantling Asbestos cement sheeting/ CGI sheets, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S & F pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, atmospheric classification category 3, coating class A complete all as specified and directed

S & F pre-painted hot dip aluminium zinc alloy metalic coated plain profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, atmospheric classification category 3, coating class A complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

M&L joint free non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for joint free non skid, Ceramic coloured tiles 7 to 8mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.38 sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:3 complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450 x350x7 mm thick on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over 10mm thick screed in CM 1:3 complete all as specified and directed.

M&L for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in wite cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and directed.

S & F in repairs, vitreous China Squatting Pan"Orissa pattern" size 580 mm x 440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 ltr capacity fixed in repair including siphan float valve and rubber cone etc complete all as specified and directed

Providing & fixing Elixir 2000 Series Windows of Double Rebate Openable windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass.The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete all as specified and directed

Supply and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

M&L for framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work complete all as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white oval shape size 550x400 mm including 32 mm PTMT waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified and directed.

S&F in repairs stop valves 15mm fancy type Chromium plated with long shank and cup(concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed

S&F in repair bib Taps 15 mm bore cast copper alloy fancy type Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair swivel shower with arm of CP fancy type for fixing with 15mm pipe complete all as specified and directed.

S&F in repairs stainless steel grating doom 125mm dia of complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail of 20mm dia of 60cm in length, D shaped, with brass chromium plated brackets completed all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stop valves/angle valves 15mm fancy type Chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed

S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.

Taking down cement plaster on brick or stone wall and roof in any description complete all as specified and directed.

M&L for rendering 5mm thick cement plastering in cement mortar 1:3 as on ceiling, chhajjas & other concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick (in two layers 10mm + 5mm) on fair faces of brick work or concrete surfaces in cement mortar 1:4 (using water proofing compound on top 5mm layer as per manufacture instructions) and finished even and smooth without using extra cement complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

Taking up or down steel water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking up or down steel water tubing 20 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in reairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, complete all as specified and as directed.

S&F in reairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, complete all as specified and as directed.

M&L for complete removal of existing wall surface and applying white cement based wall care putty on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

M&L for preparation of new plastered surfaces, applying white cement based wall care putty on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on surface of wall complete all as specified and directed.

M&L for preparation newly plastered surface and applying three coat of white wash on ceiling all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling applying one coat of white wash complete all as specified and directed.

M&L preparation newly plastered surface and applying two coats of exterior emulsion weather resistant/weather shield paint with primer on over concrete/plaster surfaces including prepation of plastered or unplastered decorated surfaces i.e, brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts, corneries, Projection, Beam etc. (as in external surfaces of wall) complete all as specified and directed.

Complete removal of existing wall surface and applying two coats of exterior emulsion weather resistant/weather shield paint with primer on over concrete/plaster surfaces including prepation of plastered or unplastered decorated including a coat of 3 mm thick or more putty concrete/plaster surfaces as per requirement including prepation of plastered or unplastered decorated surfaces i.e, brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts, corneries, Projection, Beam etc. (as in external surfaces of wall) complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & Grill without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters without taking off shutters from the frame) complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated medium density fibre board,commercial type,interior grade adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails including 4mm thick teak wood lipping duly french polished alround complete as specified and directed.

S&F powder coated aluminium frame for partiations, doors, windows ventilators with one or more rebates including joining cleat for fixing etc. completeall as specified and as directed

S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

S&F pressed steel frames of size 125mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete as specified and directed. Note: PCC in hollow frame shall be measured separately under relevant item.

S&F pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete as specified and directed. Note: PCC in hollow frame shall be measured separately under relevant item.

S&F flush shutters 35 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I Section No. 8, Clause No. 8.21(a) complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed.

S&F factory Made Solid Panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded sections 150 mm size complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S & F 100 mm long Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

S&F stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated steel and Steel based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F MS Joint, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) of Fe 410W (Gde E-250) quality B complete all as specified and as directed.

M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 34 mm x 24 mm and wall angle 32mm x 24mm in a grid of GI system duly suspended with 3mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) for providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid including dismantling old complete all as specified and as directed.

S&F in repairs 25 mm dia stainless steel tublar curtain rods including fancy type with fixing brackets, stops, rollers etc. with bracket complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) as in plinth Protection and finished the surface even and fair without using extra cement complete all as specified and as directed.

S&F pre-polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment over and including 20mm thick screed bed in cement mortar 1:4 including dismantling of old flooring complete all as specified and directed.

M&Lfor machine cut kota stone slab 20-25mm thick in floor and riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in cement mortar 1:4 including dismantling of old floor complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:5:10, type E2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

S&F in repair PVC (SWR) floor trap plain with grating of 75mm dia including jointing with solvent cement complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in bed block for hold fast and door frame etc., complete all as specified and directed

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in chajjas complete (reinforcement to be measured separately) complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately) complete all as specified and directed.

M&L for TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works for rough finished flat surfaces of concrete complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6mtr mean raidus bulit in CM 1:6 complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius as in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

ELECTRIFICATION: Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down ceiling /exhaust/wall fan including connection wire carefully and deposit to MES store in safe custody complete all as specified and directed.

M & L Point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLSH cable, 1100 volts grade IS -694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (incl connecting to earth dolly) laid/fixed in and including PVC conduit of suitable size as in concealed and also incl sunk type PVC terminal box and 3 mm thick plastic laminated sheet top covers for One light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and directed. Note: Cutting chases for conduits and sinkings for boxes and making good to walls, floors etc. in CM 1:3 in case of recessed or concealed conduit wiring are deemed to be included in the quoted rates.

All as per item serial Item No 93.00 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and directed.

All as per item serial Item No 93.00 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and directed.

All as per item serial Item No 93.00 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and directed.

S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and directed.

S&F switch socket combination 5 pin, 2-in-1, 5 Amp flush type complete all as specified and directed.

S&F stepped type electronic fan regulator, flush type complete all as specified and directed.

S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S & F in repair LED light fitting 1x9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed.

M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply & fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Supply & fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed..

S&F in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and directed.

S & F MCB SP 40 Amps, 240 V, 50 HZ,B series breaking capacity 10KA all as specified and directed.

S&F in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked for fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed.

S&F in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked for fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 8 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

M&L for sub-main wiring with 2 runs of 6 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring any type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable + 1 run of 6 Sqmm cable earthed cable + 1 run of PVC conduit together shall be measured as one unit.

M&L for wiring with 2 runs of 4 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: Note: 2 run of 4 Sqmm cable + 1 run of 4 Sqmm cable earthed cable + 1 run of PVC conduit together shall be measured as one unit.

M&L for wiring with 4 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith two run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 4 run of 6 Sqmm cable + 2 run of 6 Sqmm cable earthed cable + 1 run of PVC conduit together shall be measured as one unit.

M&L for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable + 1 run of 1.5 Sqmm cable earthed cable + 1 run of PVC conduit together shall be measured as one unit.

S&F in repairs Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB of rating 20 Amp suitable for three phase 415 V complete all as specified and as directed

S&F Sheet metal enclosure for with two pin and earth plug and socket complete with SPN MCB upto 20 Amps, 240 Volts capacity and tested on complete all as specfied and directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers including making hole in existing wall suitable for fixing of exhaust fan and making good complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 450m sweep, 1400 rpm with blades, and frame and louvers including making hole in existing wall suitable for fixing of exhaust fan and making good complete all as specified and directed.

M&L for civil work, opening on wall of suitable size and 450 x 450 x 6mm thick BWR graded plywood making suitable hole for fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and making good surface for fixing of exhaust fan complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core including taking down old complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core including taking down oldcomplete all as specified and directed

Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for foundation etc. and getting out in soft/loose soil complete all as specified and directed.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. Note :- Only punned down sand shall be measured.

M&L for bricks sub class ‘B’ brick old size for cable protection laid flat in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed.

Removing of excavated soil not exc 50m & depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed.

M&L for GI pipe light grade 40mm bore with all fittings laid in trenches or in floors, complete including taking down old rusted one all as specified and directed.

WATER SUPPLY: S& F steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed.

Cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed.

M&L taking up or down steel tubing 25mm bore or as existing on site with connections complete all as specified and directed.

S&F Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed mnimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

R K ENGINEERING ASSEMBLE (BID ID -3254549)

Pusphas Construction Pvt Ltd (BID ID -3253674)

LAXMI CONSTRUCTION (BID ID -3250145)

Ms N D Enterpise (BID ID -3254612)

KAKWANI BUILDERS (BID ID -3254823)

M/s DEBOJIT ROY (BID ID -3254685)