Constt. of Toilet Complex at bus stand Dhar Mahanpur under B2V3

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone )40 mm nominal size

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone )20 mm nominal size

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) 6.15.2 Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Extra for half Brick masonry in superstructure above plinth level upto floor V level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth leve

Centring & shuttering including strutting , propping & removal of formwork

Upto plinth level

Suspended floor

Edges of slab below 20cm

Lintel beam

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry stone agg.

Plastering with plaster in 1:6 mix

(a)15mm thick

(b)12mm thick

Plastering with 6mm thick plaster with 1:3 mix

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing and Laying vetrified flooring tile in different size with water absorption less than 0.08% and conforming to IS 15622 of approved mark in all colour and shade laid on 20mm thick cement mortar 1:4 including grouting the joint with white cement complete ( size 60 x 60 cm )

Tile work in skirting ,riser of step and dado over 12mm thick bed of cement mortar 1:3 and joint with grey cement slurry 3.3 kg/sqm. Including pointing in white cement

Distempering with oil bound distemer of approved quality & brand

Finishing walls with water proof cement paint of req. shade ( 2 or more coats )

Qty vide item no. 14(a)+

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

P/F white vitreous china pedestal type water closet (European type W.C. pan ) with ceat and lid, 10 ltr.low level white P.V.C. flushing cistern including flush pipe with manually controlled device ( handle lever ) conforming to IS: 7231, with all fitting and fixture, complete including cutting and making good the walls and floors wherever reduired: W.C. pan with ISI marked white solid plastic seat and lid.

P/F C.P. brass angle valve for basin mixer and gyser point of approved make conforming to IS : 8931 15mm nominal bore

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS: 8931

15 mm nominal bore. (Jaguar make code No.071)

P/F ball valve ( brass ) of approved quality complete. High or Low pressure with plastic floats 15 mm nominal bore

P/F G.I. union in G.I. pipe including cutting and threading the pipe and make long screws etc. complete ( new work ) 15mm nominal bore.

P/F brass bib cock of approved quality 15mm nominal bore

short nose

long nose

P/F wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the wall wherever required white vitreous china wash basin size 660 x 460 mm with single 15mm C.P. brass pillar taps with elbow operated levers ISI marked

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 15 mm nominal bore ( internal work ).

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 20 mm nominal bore ( external work ).

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 25 mm nominal bore ( external work ).

Making connection og G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including , cutting and threading the pipe etc. complete 25 to 40 mm nominal bore.

P/F PVC waste pipe for wash basin including PVC waste fitting complete 32mm dia.

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430X260X350 mm .

Providing and laying PVC soil easte pipe including bed concrete and all iround PVC pipe as per standard design 150mm dia (Prince, finolex, superme make of 4 kg / cm² pressure.

(i) 75mm dia

(ii) 100mm dia

Providing and fixing PVC loose collar (surpreme / prince make).

(i) 75mm dia

(ii) 100mm dia

Providing and fixing PVC plain bend (surpreme / prince make).

(ii) 75mm dia

(iii) 100mm dia

Providing and fixing PVC door bend (surpreme / prince make).

(i) 75mm dia

(ii) 100mm dia

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without bent arm complete, including cost of cutting and making good the walls and floors.

(i) 100mm x 75mm

(ii) 100mm x 100mm

Cutting of holes in brick masonry / RCC slab / floor for passing pipes.

a) Brick Masonry 300mm x 300mm

Constructing bricks masonry manhole in cement mortar 1:4 mix RCC tob slab with 1: 2 : 4 : mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in side plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design inside 90 x 80 cm and 45cm deep including CI cover with frames (light duty) 455 x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg with FPS bricks with class designation 75 and with

(a) crushed stone aggregate.

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Providing and fixing PTMT extension nipple for water tank pipe, fitting of approved quality, colour and make (Prayag or equivalent).

(i) 32mm nominal bore

Providing and fixing white vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.pan.

Rain water pipe 110mm dia.

Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.

Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor singlecore cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

S/F modular boxes, base and cover plate :- Supplying and fixing following size/modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 module ( 75mm x 75mm)

S/F power plug point modular type accessories:- Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required.

S/F Modular type switch/socket : Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6Amp Switch

S/F 'C' series , SP MCB:- Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

supply and fixing of main service line 25sqm.twin core aluminium cable

led pattern tube light bulb

Carriage of material from the source to the site of work

Bjari

Stone agg.

Brick

Add cost of sign board

Narinder singh contractor

MAHESH SINGH