Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.5 L+₹5.1 L (15.8%)Rejected-Finance 164 SEC 21 A CHANDIGARH 160022 | CHANDIGARH | CHANDIGARH | 160022 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹40.0 L+₹7.6 L (23.3%)Rejected-Finance 0 AS ENTERPRISES DAYALACHACK HIRANAGAR KATHUA JAMMU KASHMIR 184144 | KATHUA | JAMMU AND KASHMIR | 184144 | L3 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | TARLOCHAN SINGH AND CO L2 | P.G.INFRASTRUCTURE L1 | AS Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. | 25 | Each | 80 ₹2,000 | 50 ₹1,250 Lowest | 100 ₹2,500 |
| 2.00 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. | 20 | Each | 90 ₹1,800 | 50 ₹1,000 Lowest | 60 ₹1,200 |
| 3.00 | Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed. | 5 | Per leaf | 150 ₹750 | 50 ₹250 Lowest | 50 ₹250 Lowest |
| 4.00 | Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified. | 30 | Each | 70 ₹2,100 | 50 ₹1,500 Lowest | 50 ₹1,500 Lowest |
| 5.00 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge. | 600 | Kilogram | 560 ₹3,36,000 Lowest | 690 ₹4,14,000 | 650 ₹3,90,000 |
| 6.00 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. | 650 | Kilogram | 560 ₹3,64,000 Lowest | 690 ₹4,48,500 | 650 ₹4,22,500 |
| 7.00 | S&F for Powder Coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including U sections, fixed to aluminium door/windows/ventilators complete all as specified and directed. | 20 | Kilogram | 750 ₹15,000 | 500 ₹10,000 Lowest | 700 ₹14,000 |
| 8.00 | Material and labour in repair aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed.
Make :- Alstone/Alex panel/Armstrong/Euroboard | 45 | Square Metre | 850 ₹38,250 | 500 ₹22,500 Lowest | 800 ₹36,000 |
| 9.00 | Supply and fix 5mm thick float glass, tinted/smoked/Eached shape fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed. | 20 | Square Metre | 950 ₹19,000 | 500 ₹10,000 Lowest | 650 ₹13,000 |
| 10.00 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. | 20 | Square Metre | 550 ₹11,000 | 250 ₹5,000 Lowest | 650 ₹13,000 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
28 May 2026, 6:55 pmClosed
GE (AF) MC CHANDIGARH
GE (AF) MC CHANDIGARH
REPAIR/REPLACEMENT OF JOINERY, FALSE CEILING, WALL PANELING AND CONNECTED WORKS IN DOMESTIC AREA AT 3 BRD UNDER GE (AF) MC CHANDIGARH
2026_MES_765382_1
GE (AF) MC/CHD/T-30/2026-27
Open Tender
Civil Works
Item Rate
120 days
CHANDIGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) MC CHANDIGARH
₹80,000
Yes
8 Aug 2026
14 May 2026
30 May 2026
14 May 2026
28 May 2026
21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. | 25 | Each | - | - |
| 2 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. | 20 | Each | - | - |
| 3 | Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed. | 5 | Per leaf | - | - |
| 4 | Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified. | 30 | Each | - | - |
| 5 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge. | 600 | Kilogram | - | - |
| 6 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. | 650 | Kilogram | - | - |
| 7 | S&F for Powder Coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including U sections, fixed to aluminium door/windows/ventilators complete all as specified and directed. | 20 | Kilogram | - | - |
| 8 | Material and labour in repair aluminium composite panel sheet of 4mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber basket complete all as specified and directed.
Make :- Alstone/Alex panel/Armstrong/Euroboard | 45 | Square Metre | - | - |
| 9 | Supply and fix 5mm thick float glass, tinted/smoked/Eached shape fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed. | 20 | Square Metre | - | - |
| 10 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. | 20 | Square Metre | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
BOQ_857216.xls
BOQ • 0.58 MB
TenderDocument30.pdf
Tender Documents • 1.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .