WELCOME MAINTENANCE TO CERTAIN MD ACCN AND REPAIR AND CLEANING OF SEWAGE LINE SANITARY FITTINGS UNDER AGE B R I CHANDIPUR

Amount

PART-I M/L for preparation of old decorated surfaces of walls plastered or unplastered incl removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying one coat of white wash to walls to obtain uniform surface including making good the surface all as specified.

- ditto - all as per item No. 1 above but on ceilings complete all as specified & directed by Engr-in-Charge..

- ditto - all as per item No. 1 above but one coat of distemper oil emulsion on walls complete all as specified & directed by Engr-in-Charge..

M/L for preparation of old decorated surfaces of walls plastered or unplastered incl two coat of distemper oil emulsion over Priming plastered and other surfaces all as specified.

M&L for complete removal of existing treatment of walls plastered applying two coat of distemper oil emulsion over a coat of wall putty including making good the surface all as specified.

M&L for Preparation of old surfaces and applying one coat of synthetic enamel paint to wood and wood based surfaces of any description not otherwise described over 10cm width or girth complete all as specified & directed by Engr-in-Charge.

M&L for Preparation of old painted surfaces of steel and applying one coat synthetic enamel paint to steel surfaces of any description not otherwise described over 10cm width or girth complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-in-Charge.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid seperately) on wall complete all as specified & directed by Engr-in-Charge.

Supply only intergral water proofing compound (liquid admixture) complete all as specified & directed by Engr-in-Charge.(Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for 15mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified & directed by Engr-in-Charge.

M&L for 10mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement on ceilings complete all as specified & directed by Engr-in-Charge.

M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation complete all as specified & directed by Engr-in-Charge.

M&L for prepartion of newly plastered surfaces and priming plastered surfaces with alkaliresistant primer paint and applying two coats of oil bound distemper on walls over a coat of wall putty all as Specified & directed

M/L for preparation of new decorated surfaces of walls plastered or unplastered and applying three coat of white wash to walls surface all as specified.

M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall complete all as specified & directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed by Engr-in-Charge.

M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified & directed by Engr-in-Charge.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate to receive tiles complete all as specified & directed by Engr-in-Charge.

M&L for 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete all as specified & directed by Engr-in-Charge.

M&L for joint free coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles complete all as specified & directed by Engr-in-Charge.

M&L for coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles complete all as specified & directed by Engr-in-Charge.

-Ditto- all as per item No 22 above but as in skirtings complete all as specified & directed by Engr-in-Charge.

M&L Vitrified light shade tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc jointed in neat slurry and pointed in white or coloured cement to match the shade using coloured tiles complete all as specified & directed by Engr-in-Charge.

-Ditto- all as per item No 24 above but as in skirtings complete all as specified & directed by Engr-in-Charge.

M & L joint free Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour tiles complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified & directed by Engr-in-Charge.

S&F GI pipe medium grade 15 mm dia bore as in walls .

S&F GI pipe medium grade 20 mm dia bore as in walls.

Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore

Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as directed by Engineer-in-Charge.

All as per item No.33 above but exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified & directed by Engr-in-Charge.

Taking down shutter of any description n.exc 1.0 Sqm each complete all as specified & directed by Engr-in-Charge.

All as per item No 35 above but exc 1.0 Sqm and n.exc 2.0 Sqm each complete all as specified & directed by Engr-in-Charge.

M&L 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed by Engineer-in-Charge.

M & L PCC type C1 (1:3:6, using 20 mm graded stone aggregate) for fixing of hold fast complete all as specified & directed by Engr-in-Charge.

S&F MS hold fast made out of 25x 3mm flat iron dully cutting/barding of required size complete all as specified & directed by Engr-in-Charge.

S&F 30mm thick factory made 2nd class hard wood glazed, gauged, skeleton shutter, as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats open rebated and prepare to receive glass, gauge etc divided into squares edges of framing, plain, chamfered or rounded, mitred and rebated sash bars any numbers prepared to receive glass/ gauge and all as specified.

All as per item No-40 above but for 35mm thick, as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed by Engr-in-Charge.

S&F 35 mm thick factory made plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed by Engineer-in-Charge.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both sidePrelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified & directed by Engr-in-Charge.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified & directed by Engr-in-Charge.

S&F Butt hinges mild steel 100mm long, medium weight, cooled rolled complete all as specified & directed by Engr-in-Charge.

All as per item No. 45 here-in-before but 75mm long complete all as specified & directed by Engr-in-Charge.

S&F 250 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as directed by Engineer-in-Charge.

S&F 125mm long extruded Aluminium alloy handles, fabricated type anodised.

S & F 150mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-Charge..

S & F 125mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified & directed by Engr-in-Charge..

S & F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified & directed by Engr-in-Charge..

S&F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each complete all as specified & directed by Engr-in-Charge.

S&F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each as in repair complete all as specified & directed by Engr-in-Charge.

All as per Item No. 53 above but 3.00 mm thick figured glass complete all as specified & directed by Engr-in-Charge.

S&F of stainless steel wire cloth 0.36mm nominal dia and average with of aperture 1.4mm with beads & metal panel pin fixed complete all as specified & directed by Engr-in-Charge.

S&F of stainless steel wire cloth 0.36mm nominal dia and average with of aperture 1.4mm with beads & metal panel pin fixed in repairs complete all as specified & directed by Engr-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preperation of surfaces complete all as specified & directed by Engr-in-Charge.

S&F of 2nd class hardwood plain fillets square or rectangular or triangular in section clean sawn,secured with nails or brads of cross section exc 3 Sqcm but not exc 6 Sqcm in repairs complete all as specified & directed by Engr-in-Charge.

S&F prelamintated particle board of 18mm thick, interior grade, one side with decorative lamination other side balancing white lamination, fixed with screws in pelmet boxes, shelves or cupboard shutters or in narrow width n exc 15 CM each, rebated or flat edged as in repairs complete all as directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length 140 mm of cover plate as in repairs complete all as specified & directed by Engr-in-Charge.

S&F 100mm long Hasp and Staple, Safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed by Engr-in-Charge.

S&F 300mm MS ordinary rat tail rod pattern springs including roller & roller plate complete as in repair complete all as specified & directed by Engr-in-Charge.

S & F stainless steel 20 mm dia curtain rod complete all as specified & directed by Engr-in-Charge.

S & F fancy type stainless steel bracket for 20 mm dia curtain rod complete all as specified & directed by Engr-in-Charge.

S & F Brass CP mixer of 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified & directed by Engr-in-Charge.

S &F in repairs 15mm CP angular stop cock with flange complete all as specified & directed by Engr-in-Charge.

S&F in repairs 15 dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified & directed by Engr-in-Charge.

S&F pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high presure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified & directed by Engr-in-Charge.

S&F in repairs 15 dia PVC Bib cock complete all as specified & directed by Engr-in-Charge.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete complete all as specified & directed by Engr-in-Charge.

Supply and fix Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding in repairs complete all as specified & directed by Engr-in-Charge.

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified & directed by Engr-in-Charge.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm as in repair complete all as specified & directed by Engr-in-Charge.

S&F vitreous china wash basin, white, flat back size 550x400mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets,wastevpipe,waste coupling in repairs complete all as specified & directed by Engr-in-Charge.

S&F stainless steel sinks with drainage board made of steel 1 mm thick kitchen with plugs washers and waste coupling & waste pipe, including bedding in cement mortar dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified & directed by Engr-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste coupling & waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engr-in-Charge.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, approons etc complete all as specified & directed by Engr-in-Charge.

M & L Granite (of any type) tiles 18mm(+2) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified & directed by Engr-in-Charge.

S & F Mild steel Mortice lock, vertical type, 04 lever of size100 mm fixed in repair complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.

M&L PCC (1:5:10) type E2 using 40 mm graded aggregate as in sunken floor filling complete all as specified & directed by Engr-in-Charge.

M&L 10mm thick cement mortar (1:3) mixed with TUFF SHIELD) mortor plus of Nito bond SBR @10 ltr/bag of cement of M/S FOSROC ((as per manufacture's instruction) shall be applied for as secondary protectin over bottom and side wall of lit pit complete all as specified & directed by Engr-in-Charge.

S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs complete all as specified & directed by Engr-in-Charge..

S/F brass chromium plated shower rose 125 mm size fixed in repair complete all as specified & directed by Engr-in-Charge.. (Prayag/ Jaquar/ Mark)

S&F MS hat pegs,solid body,125mm to 175mm as specified and directed

S&F CP tubular towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 90gms) complete all as specified & directed by Engr-in-Charge.(Make-Prayag/Jaquar/Jainko)

S&F aluminium anodised tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair complete all as specified & directed by Engr-in-Charge..(Make-Prayag/Jaquar/Jainko)

S&F PVC grating doom 100 mm dia complete all as specified & directed by Engr-in-Charge. .

S&F Plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device in repair complete all as specified & directed by Engr-in-Charge. ( make: Paryware/Hindware ).

S & F health faucet Abs with Double lock 1.0 meter tube and wall hook complete all as specified & directed by Engr-in-Charge.

S&F 200 mm corner glass shelf complete all as specified & directed by Engr-in-Charge. .

PART-II (SEWAGE) Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified & directed by Engr-in-Charge.

-ditto- all as per item No 93 above but exc 1.5m and n.exc 3.00m complete all as specified & directed by Engr-in-Charge.

Demolition and breaking up drain pipes, 100mm internal dia, (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified & directed by Engr-in-Charge.

Demolition and breaking up drain pipes, 150mm internal dia, (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified & directed by Engr-in-Charge.

Demolition of brick or stone/boulder masonry, built in cement mortar incl coping complete all as specified & directed by Engr-in-Charge.

Demolition of existing cement concrete (un reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge..

Taking down existing cement plaster in cement mortar on brick/stone masonry walls etc incl racking out joints hacking for key scru bbing down with water all as specified (internal and external surfaces of manholes, septic tanks, etc).

M&L for Cleaning of drain pipes exc 100mm but not exc 300mm by rodding from man holes incl flushing with water and placing back manhole covers after cleaning for pipes complete all as specified & directed by Engr-in-Charge.

Taking out deposited sludge from manhole, septic tanks etc n.exc 1.50m depth from top of manhole , septic tanks etc pumping out sewage water including cutting of bushes and removing of sludge from bottom of manhole, septic tanks etc to a distance 50m and covering of the deposited sludge with excavated earth includiing spereading of bleaching powder @ 1.00 Kg/Sqm (for disinfection purpose) over deposite sludge before earth spreading incl sweepingncleaning with water all as specified (earth work will be paid separately)

All as per item No 102 here-in-before but depth exc. 1.50m and n.exc 3.00m depth complete all as specified & directed by Engr-in-Charge.

M&L for cleaning of blockage of gully trap, water closet, WHP of any description complete all as specified & directed by Engr-in-Charge.

M&L for cement concrete in foundations, filling and mass concrete using type D2 1:4:8 (40mm graded stone aggregate) complete all as specified & directed by Engr-in-Charge..

M&L for plain cement concrete type C1 1:3:6 (20mm graded stone aggregate) as in copings complete all as specified & directed by Engr-in-Charge.

M&L for plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in benching, finishing surfaces of concrete even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L precast cement concrete type B1 (1:2:4) using 20mm graded sone aggregrates set in cement mortar 1:4 as in cover slabs of manhole/septic tanks complete all as specified & directed by Engr-in-Charge.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size bricks complete all as specified & directed by Engr-in-Charge.

All as per item No 109 but except bricks complete all as specified & directed by Engr-in-Charge.

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement incl mixing with water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement including mixing with water proofing compound complete all as specified & directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L for MS TMT bars, 10mm dia & over , cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire and quality conforming to complete all as specified & directed by Engr-in-Charge.

M&L for MS TMT bars, 8mm dia & over , cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire and quality conforming to Fe-410-W(Gde. E-250) Quality A or Fe 290 (Gde E-165) complete all as specified & directed by Engr-in-Charge.

M&L for returning, filling incl spreading levelling watering and well ramming in layers n.exc 25 cm as in soft/loose soil complete all as specified & directed by Engr-in-Charge.

Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed by Engr-in-Charge.

M&L for salt glazed stoneware drain pipes grade `A' laid in trenches and jointed as specified, internal dia of pipe 100mm complete all as specified & directed by Engr-in-Charge.

M&L for salt glazed stoneware drain pipes grade `A' laid in trenches and jointedin cm 1:1 complete internal dia of pipe 150mm as specified

M&L for concrete bed to drain pipes 100mm dia using cement concrete 1:4:8 type D2 including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified & directed by Engr-in-Charge.

M&L for concrete bed to drain pipes 150mm dia using cement concrete 1:4:8 type D2 including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR) bend any radius 110mm bore with access door complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR) junction double T equal or unequal with access door of bore 110mm complete all as specified & directed by Engr-in-Charge.

S&F PVC(SWR) floor trap, plain with grating including jointing with solvent cement 75mm outlet complete all as specified & directed by Engr-in-Charge.

S&F PVC(SWR) gully trap125/110 including jointing with solvent cement 75mm outlet complete all as specified & directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl of bore 110mm complete all as specified & directed by Engr-in-Charge.

Supply and fix Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding in repairs complete all as specified & directed by Engr-in-Charge.

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified & directed by Engr-in-Charge.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified & directed by Engr-in-Charge..

S&F vitreous China bowl urinal flat back size 465 x 365 x 265mm white (minimum) withgrating and union for discharge pipe (excluding flushing cistern, flush pipe complete including waste coupling & waste pipe and providing & fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixed in repairs complete all as specified and directed (Make : Hindware, Parryware, Nycer).

jlenterprise

MS BEHERA SANITARY AND HARDWARE

Ajay Associates

NUPUR CONSTRUCTION

M/S DK MUKHERJEE CO

MS MISHRA ENTERPRISES

DS ENTERPRISES

RANA ENTERPRISES

MS SUBHAM ENGINEERING AND CO

M/S T.N.CONSTRUCTION