Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.4 LAccepted-AOC 161 SADAR BAZAR SADAR BAZAR CANTT AYODHYA UP PIN 224001 | AYODHYA | AYODHYA | UP | 224001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹16.4 L+₹67,785 (4.31%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹16.8 L+₹1.1 L (6.73%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹17.0 L+₹1.2 L (7.90%)Rejected-Finance D 65 423 C 1 RANA NAGAR COLONY GATE NO 4 LAHARTARA VARANASI UP PIN 221106 | VARANASI | VARANASI | UTTAR PRADESH | 221106 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹18.3 L+₹2.5 L (16.1%)Rejected-Finance MIG 444 AWADHPURI COLONY AMANATGANJ AYODHYA 224001 | AYODHYA | AYODHYA | UTTAR PRADESH | 224001 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹20.5 L
EMD Value
₹41,000
Closing Date
15 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Ayodhya
AGE (I) Military Engineer Services Ayodhya Cantt PIN-224001
SPECIAL REPAIR TO PORTION OF BLDG NO. 23 AND 24 OF DRC UNDER AGE (I) AYODHYA
2023_MES_614565_1
8382/E8
Open Tender
Civil Works
Item Rate
120 days
Ayodhya
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Ayodhya
₹41,000
Yes
14 Dec 2023
19 Aug 2023
18 Sept 2023
19 Aug 2023
15 Sept 2023
2 Sept 2023
Amount
Dismantling AC (corrugated or semi corrugated) / fibre glass translucent sheet as in roof covering including ridges of any description complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge fixed with self tapping screws complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls of any description including raking out joints, hacking for key, scrubbing down with water to receive plaster and rubbish off the premises etc complete all as specified and directed.
Dismantling floor, wall tiles including cement mortar bedding but not backing, removing serviciable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 15mm thick rendering inn cement mortar (1:4) on fair faces of brick work or concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plasterd surfaces of any description and applying 1 mm thick wall care putty on external and internal surfaces of walls complete all as specified and directed.
M&L for 15mm thick screed bed or bedding layer incement mortar (1:6) for laying further floor finishes such as tiles etc complete all as specified and directed.
M&L for vitrified ceramic dark shade tiles 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm, laid in floors etc over screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note- Make, colour and design to be approved by AGE (I).
M&L for chequered cement concrete tiles 20cm x20cm x 25mm thick with grey cement and no pigment, laid over screed bed, set, jointed and pointed in neat cement slurry in floors/paths complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over over a coat of primer complete all as specified and directed.
M&L for prepararion of newly plastered surfaces of walls and applying two coats of weather coat over a coat of exterior grade primer complete all as specified and directed.
M&L for anti-termite treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.
M&L for anti-termite treatment to soil under existing floors using chemical emulsion @ one litre per hole including drilling 12mm dia holes at 300mm c/c and plugging with cement mortar (1:2) (1 cement: 2 sand) and finishing to match the existing floor surfaces complete all as specified and directed.
M&L for preparation of old surfaces of walls by complete removal of existing decorative treatment and applying two coats of weather coat exterior emulsion paint over a coat of exterior grade water proof wall care putty 2-3 mm thick and a coat of primer complete all as specified and directed.
M&L for preparation of old surfaces of walls by complete removal of existing decorative treatment and applying two coats of oil bound distemper over 1mm thick wall care putty on internal wall surfaces complete all as specified and directed.
M&L for 5mm thick cement plaster on fair faces of concrete surfaces of ceiling in cement mortar (1:3), finished even and fair complete all as specified and directed.
S&F decorative POP cornies of sectional area 30 to 50 Sqcm complete all as specified and directed.
M&L for preparing newly plasterd ceiling surfaces with 1mm thick wall care putty and applying two coats of destemper oil emulsion complete all as specified and directed.
M&L for providing precast cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in 25mm thick louvres and jallies (measured solid), including all mouldings, set in cement mortar (1:4) complete all as specified and directed.
M&L for providing precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc and setting in mortar (1:4) with joints to match complete all as specified and directed.
S&F framed shower enclosure, corner entry, half rounded of size - 1200x1200x1950mm with curved sliding door of 6mm thick glass and finished chrome complete all as specified and directed. Make- Jaquar model-Delta Cat No. JSE-CHR-DEL 1212X or equivalent as approved by AGE (I).
S&F shower panel Jaq Brushed stainless steel of size 1400x200mm complete all as specified and directed. Make- Jaquar model- Jaq Brushed S S with Cat No. JPL-SSF-ST8858B3 or equivalent as approved by AGE (I).
Dismantling wall & celling boards (fibre pulp insulation etc) or insulation boards / slabs / blankets of any thickness including cover fillets complete all as specified and directed.
S&F E- board ceilin tiles on GI powder coated channel / Tee / Grid of make (Armstrong or equivalent) frame work with the following specifications including cutting holes in brick wall built in cement mortar & making good in cement concrete (1:2:4) type B-0 / cement mortar (1:3) complete all as specified and directed :- (a) M&L for plugging to wall around the room and supplying & fixing GI powder coated angle of size 25 X 25 mm X 1.0 mm (make - Armstrong or equivalent). (b) S&F 2 mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab placed @ 605 mm centre to centre from perimeter of wall. (c) S&F 25 x 25 x 1.0 mm thick GI tee powder coated as main and cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S&F 4mm thick E-board of approved texure and finished ceiling tiles of size 595 x 595 mm, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be approved by Engr-in-Charge.
Demolition of concrete of any description and in any position complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6m mean radius complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base including surface dressing complete all as specified and directed.
M&L for 60mm thick coloured (combination of red and yellow) machine pressed precast cement concrete M-35 grade interlocking paver block, glossy and rubber moulded with white cement and pigment of any size and shapeconforming to IS-15658-2006, completed all as specified and detected.
M&L for dry river sand, spread and levelled in a uniform layer as in cushioning for laying paver blocks complete all as specified and detected.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape, required, including cranking, bending sprially for hoping for cols, hooking ends and binding with MS and including wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F 8 mm dia and over TMT bar for reinforcement, cut to length, bent to shape required including cracking bending booking ends and binding with MS wire (annealed) not less than 0.9mm dia all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (nominal mix) (using 20mm graded crushed stone aggregate) as in roof slab supported on walls, beams and columns, in floors, roofs, landings, balconies etc and in shelves and the like including necessary formwork complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fittingS&Fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kitS&Fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC concealed conduit of adequate size with all fittings and accessories including metal modular sunk box with modular cover plate with frame of suitable size including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly . including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-
All as per Srl item No. 39.00 above but for one light/fan point controlled by one, one way switch
All as per Srl item No. 39.00 but for one bell point controlled by one bell push.
All as per Srl item No. 39.00 but for One socket outlet point 6 A on same board
All as per Srl item No. 39.00 but for one socket outlet point 6 Amps on independent board
All as per Srl Item No. 39.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps Metal modular sunk box with modular cover plate with frame of suitable size complete all as specified and directed.
All as per Srl Item No. 39.00 here in before but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for one AC socket point on independent board complete all as specified and directed.
S&F Modular Switch 1 way, 6A, 1 module as per existing as directed by Engr-in-charge.
S&F modular type white colour bell push 6 Amps, 230 Volts in 1 modules all as specified and as directed.
S&F modular type white colour shuttered socket 16 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.
S&F modular type white colour shuttered socket 6 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.
S&F modular type white colour shuttered socket 16 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.
M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.
S&F modular stepped type electronic fan regulator white colour 120 Watt, AC 230 Volts suitable for 2 modules including connecting complete all as specified and as directed.
S&F in replacement, bell/buzzer Ding Dong type AC 230 Volts complete all as specified and directed.
Taking down old unserviceable submain wiring of any description and M&L for new sub main wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB complete all as specified..
Taking down old unserviceable submain wiring of any description and M&L for new sub main wiring with two run of 4.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB and AC complete all as specified.
Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and S&F new epoxy powder coated MCB distribution box double door TPN 4 way horizontal type for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.
Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and S&F epoxy powder coated MCB, DB, double door SPN 12 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.
S&F MCB, TPN ,100 A, 415V 25KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning
S&F MCB Triple Pole & Neutral of capacity 63 amps, 240 Volts C-series with 10kA breaking capacity all as specified and as directed.
S&F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.
S&F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection complete all as specified and as directed.
S&F MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.
Taking down unserviceable LED light fitting and S&F new round shape 15 watt 220 volts(White/warm White) AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed by Engr-in-Charge
Taking down unserviceable LED light fitting and S&F new LED tube light fitting,1X20 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack fitting including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed by Engr in Charge
Taking down unserviceable LED light fitting and S&F new warm/white LED wall mounted light with single swing arm for mirror of suitable size including all mounting all mounting hardware high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in Charge
Taking down unserviceable LED light fitting and S&F LED building security light fitting 20 Watt 230 Volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including hermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr in Charge.
S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc all as specified and directed by Engr in Charge
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.
S&F Wall mounted fans, 230 volts, single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed by Engr in Charge
S&F Motion sensor B22 LED Bulb 9 watt 220 V AC complete all as specified and directed by Engr in Charge
S&F Modular AC Box With 20A SP MCB, Plastic Enclosure & Unbreakable Heavy Duty With ISI AC Plug Top for AC all as specified and directed Cat No:-98489 Make :-Anchor/ Havells/Bajaj or equivalent specified make.
S&F ceiling fans design blades, 230 V, 1200mm sweep, Air delivery 240 CMM , 5-Star Rated Remote-Controlled Silent Ceiling Fan with ActivBLDC Technology to Save Energy complete all as specified and directed by Engr in Charge
S&F Decorative, surface mounting, dome shaped pendant in green & black finishes with LED Filament lamp 4 W T32 2C Type B22 CLEAR complete all as specified and directed by Engr in Charge
S&F bed side lamp antique type decorative light of metal base with LED bulb, complete all as specified and directed by Engr in Charge
Dismantling existing unserviceable earthing and M&L for new earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.
M/S CHANDRIKA PRASAD AND SONS
Saket Traders
R K BROTHERS
ABC CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .