Signalling work in connection with " Development of Infrastructure facilities for Track Machine Siding in Solapur Division of Central Railway."

02-SOR EXECUTION

03-NS SUPPLY AND EXECUTION

Item Breakup - 01-SOR SUPPLY

10.00 Drg. No.TCA 15080 and Spec. No IRS-TC-44/88 (Amd.1) with amendment No. 1 Voltage 24 V DC. ( Inspection by RDSO ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

65.00 of PBT Specn No.IRS/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA- 23741A Alt.4., SA-23745 Alt.5, SA-23746, SA- 23748 Alt.4, & SA-23756 Alt.3. ( Inspection by RDSO )

50.00 per RDSO Drg No SA-23748 Alt 4, SA-23749 & Spec No.IRS S 75/2006 Rev.02 with latest amendment. Fuse block shall be suitable for round head type voltage fuses. ( Inspection by RDSO )

100.00 low voltage cartridge fuse as per specn No. IRS/S/78/92 with latest amendments - 2A/4A/6A capacity ( Inspection by RDSO )

8.00 14252.00 with detachable handle on both the doors.a) Single Case as per Drg No SK 783-1 & 2. with latest alteration. ( Inspection by RITES )

8.00 11287.00 with detachable handle on both the doors. b)Half Case as per Drg No SK 783-1 & 2. with latest alteration. ( Inspection by RITES )

20.00 Drg.No.CR/S&T/SK-815 ( Inspection by Consignee )

50.00 C.Rly Drg.No.RST 11509 made from fiber glass alongwith terminal blocks. ( Inspection by Consignee )

2000.00 connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed for recycled material should not be used. ( Inspection by Consignee )

500.00 track circuit rail bonding. As per IRS Specification S:13-62 ( Inspection by Consignee )

50.00 set suitable for ground connection as per RDSO drg No T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23/88 with Amendment No.01 & 40/84 with Amendment No.01 or latest amendments. ( Inspection by Consignee )

50.00 set consisting of one inlsulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST-10692 ( Inspection by Consignee ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

50.00 per RDSO drg No: T-10372 Alt2, T-10368, T- 10371 Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS S 23/88 with Amendment No.01 & 40/84 with Amendment No.01 or latest amendments. ( Inspection by Consignee )

30.00 class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make. ( Inspection by Consignee )

120.00 coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver 1.1 with Amd.1 or latest. ( Inspection by Consignee )

189.00 dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. ( Inspection by RITES )

365.00 dia outer and 250 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. ( Inspection by RITES )

9.00 63534.00 Telecom duct of size 50/42 mm and accessories as per latest Specification TEC GR No. GR/TX/CDS-008/03March 11 with latest amendment" for OFC cable of size 24 fibre armoured in length of 1000 mtr/roll. Duct to be supplied from TEC approved sources. ( Inspection by RITES ) Total 2102748.00

Item Breakup - 02-SOR EXECUTION

and laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783- 1& 2. with latest alterations & as per instructions of Rly engineer at site. a) Single Case

and laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783- 1& 2. with latest alterations & as per instructions of Rly engineer at site. b)Half Case

1500.00 phenolic laminated sheets and fixing by Conductor stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. SOLAPUR DIVISION-S AND T/CENTRAL RLY

of terminal/fuse blocks in the apparatus cases/ Conductor cable termination rack. This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.

8.00 8500.00 foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. i) Single Case as per Drg No SK-803

8.00 8024.00 foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. ii)Half Case as per Drg No SK-804

8.00 filling of location foundations and plastering .i)Single Case

8.00 filling of location foundations and plastering. ii)Half Case

8.00 1266.00 chargers batteries etc. as applicable) & wiring of the same in apparatus cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. i) Single Case

8.00 chargers batteries etc. as applicable) & wiring of the same in apparatus cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. ii)Half Case

20.00 Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks, block instruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.

50.00 Lead juntion Box on two supports (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40x40x5mm 1200mm length. This will include drilling of holes for track lead/side connections of rail. The work shall be carried out as per Drg. No.SK-845 or / & instructions of Rly engineer at site. SOLAPUR DIVISION-S AND T/CENTRAL RLY

200.00 jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as Per IS:2266:2019. Reclaimed or recycled material should not be used. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provison of two jumpers for each bond, clipping of bonds etc. with contractors own materials and tools as per instruction of Rly engineer at site.

200.00 SWG) for track jumper & fish plate joints bonds. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly engineer at site.

600.00 plan, 1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm thickness after clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

300.00 plan, 1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm thickness afer clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

20.00 concrete type) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 807

30.00 bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site. SOLAPUR DIVISION-S AND T/CENTRAL RLY

20.00 flange/road level (for LC) and, 0.3 Mtr to 0.6 Mtrs wide and back filling after placing of DWC/RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately). The ballast disturbed be screened and dressed as required by Engineer- in-charge or his representatives and road tarred immediately. Drg No SK 806

3000.00 RCC Half round pipes in trenches at places of track and road crossings, platform cutting etc.

12.00 various cores/sizes in trenches.

20.00 feasible, cable shall be protected as under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench."

280.00 Mtr depth along with laying of 120mm HDPE pipe for track crossing with minimum depth reckoned from bottom of the rail/Road crossing with minimum depth reckoned from ground level. The work shall be done as per extant practice & instructions of site engineer. Preparation of site for Horizontal Boring shall be carried out in presence of Railway Representative. HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.

10.00 machine through bend pipe this includes preparatory work of pulling the cables, and peeling out the insulation, dressing and lacing after termination etc., pulling of tail cable as per circuit requirement inside point machine through bend pipe, termination of cables on terminal blocks as per instruction of site supervisor the cable shall be entered in such a way that, armouring shall protect the cable near sharp edge of entry point and armouring shall be clamped between pipe fixing bracket and boy of point machine.

5.00 4835.00 Digging of pit, cleaning of earth from all sides, breaking of seal of location boxes removal of sand from location, marking of new cable holes. 2) insertion cable from ground 3) making place for cable termination in old location, shifting ARA, fuse etc after removal and termination including fixing of ARA. 4) Termination of cable in old location. 5) Filling of sand and plastering to all sides upto 50 mm below ground level." SOLAPUR DIVISION-S AND T/CENTRAL RLY

5.00 existing location box to New location box. The work include breaking/dismantling of existing foundation of locations, excavating and removing / segregating coils of this cables which may be of about 10 mtr in length. These cables are then to be disconnected and removed from the existing locations one by one as per the instructions and under the supervision of railway staff present at site. The cable is then to be inserted and terminated in new location box. The item includes neatly dressing of cables marking wiring tree etc. The material required for dressing / lacing will be arranged by contractor at its own cost. The work is required to be done systematically and with due precaution during the night block of 2.00 - 2.30 hrs each or within the time that may be allowed. The excavation work to be done carefully without damaging the cables to avoid undue failures. (Termination charges will be given separately) Note: Proportionate payment will be made if cable is of other length. 2/6/12/19/24/30 core signalling cable/4 or 6 Quad/PIJF/Any signalling/Telecom Cable (One no. unit = One cable of 10 m length) "

20.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions o f site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (i)Apparatus Cases Full size.

20.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions o f site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (ii)Apparatus Cases Half size.

40.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions o f site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(v)Track lead Junction Box. (Black enamel outside only) SOLAPUR DIVISION-S AND T/CENTRAL RLY

40.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions o f site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(vi)Point Machine with ground connections complete (Point Machine with Black enamel only outside and ground connections with Red Oxide)

20.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions o f site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(vii)Axle counter devices.

100.00 Machine, Track Lead junction Boxes, Block joints, Apparatus Cases etc.(each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway.

20.00 equipments names etc., legibly and neatly inside location boxes.(a)Full Case.

20.00 equipments names etc., legibly and neatly inside location boxes.(b)Half Case.

of material/equipments including loading and unloading in 10MT vehicle, anywhere to anywhere, and stacking at destination as per instructions of SSE in-charge as per inventory. For carrying heavy materials like cable drums, DG set, Electrical lifting barrier pedstal, IPS, Batteries, Point machine etc.Unit(Per Ton/Per KM=1 set)

9.00 5462.00 protective work as per direction of site engineer.

9.00 11607.00 duct and protective work, as per direction of site engineer. Total 1925721.00

Item Breakup - 03-NS SUPPLY AND EXECUTION

HDPE Pipe 110 mm Diameter,PE63, Class PN6, Metre withconfirming to IS4984 with ISI marked (or) Latest.(Inspection By Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Casting of cement concrete to protect S&T cum equipments and laid cables above pipes, signal store etc by concrete mixture of cement , sand, stone in the ratio of 1:2:4 using 25 mm graded stone aggregate as per instruction of site in charge of railways. Concrete is to be casted with the help of suitable size of shuttering from as per site requirement. concrete is to be cured for sufficient time as per standard practice of railways.

Installation of earth electrode assembly by Numbers drilling 300mm vertical hole in rocky area as per Drg.No.RE/S&T/SIG/ Tender/SK 726 /85, including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks,block insruments,and etc. as per RE manual. The earth value should be less than 10 Ohm sincluding the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material requiredfor provision of earthing will be brought by the contractor.

Insulating Components for Ground Connections Numbers of 220mm stroke Point Machine in set One set consists of :- 1. Insulating Bush for Switch Extension Bracket to drg.no. S-23199 : 04 Nos. 2. Bush for Drive Rod Lug to Drg.No. RDSO S 3463 : 1 No. 3.Insulating Plate RH to Drg.No. S 3592 : 01 No 4. Insulating Plate LH to Drg.No. S-3593 : 01 No 5. Insulating Washer to drg.No. S-8640 : 04 Nos. 6. Drive Rod Insulation Washer to Drg.No. CWM 10323 : 2 Nos. 7. Insulating Plate for Locking Bar Assembly to Drg.No. S 3404 Alt-2 : 02 Nos. 8. Crank Bush to Drg.No. S 8912 Alt-2 : 6 Nos 9. Insulation Plate to Drg.No. CWM 09723 : 03 Nos 10. Insulating Plate for Gauge Tie Plate and Stretcher Bar to Drg.No. CWM 09623 : 22 Nos. 11. SSD Insulation Plate to drg.No. CWM 10023 : 01 No. 12. Insulation Bush to Drg.No. CWM 09923 : 11 Nos. (Items from 1 to 12 to be supplied duly packed in polythene covers in sealed condition)FIRM'S OFFER: MAKE / BRAND - SHT or similar. (Inspection by Consignee)

L Bracket insulation made of Nylon 66 as per Set specification No:IRS.S 40/84. One set consisting of 1) Insulating plate Drg no S.8804=1nos, 2) Insulating Bush drg no S.8813=2nos, 3) Insulating washer drg no S.8640=04 nos. (Inspection by Consignee)

HIGH SPEED STEEL HIGH COBALT CONTANT Numbers DRILL BIT 14 MM (Inspection by Consignee)

DRILL BIT WITH HOLE SAW CUTTER. HOLE SAW Numbers ARE MOUNT ON AN ARBOR SIZE 22 MM((7/8").USED FOR CUTTING CLEAN, CIRCULAR HOLES IN A VARIETY OF MATERIALS. (Inspection by Consignee)

HSS Parallel Shank Super Jobber Series Drill Bit Numbers of Size-7mm.Make: Miranda Tools or Bosch or JK OR TAPARIA OR STANLEY OR TATA AGRICO. (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Digital Current Clamp Meter to measure Numbers current leaks parasitic draws down to 1ma and electric loads from 1 ma to 100 Amp AC/DC and voltages from 0 to 600v AC/DC, small jaw size to measure current in signaling circuits, 4 digit display. Make Fluke/GTC/KOICO or superior with better specifications mentioned with all accessories like test lead, batteries, and carrying case, sample may got approved from consignee before supply. (Inspection by Consignee)

Battery operated High performance LED area Numbers with 3000 lumens output light weight & unbreakable as per specification attached (1) Product specification M18 HAL -+ M18 NRG 502B (2) Article No. 493345123 (3) Battery compatibility all Milwaukee M18 Batteries (4) Battery capacity (Ah) 5.0 (5) Battery type Li ion (6) No of Battery charger supplied 01 No. (7) Full Battey charging time 59 min (8) Maxlight output 3000/1500/650 (9) Max run time battery 2/4/9 hr. (10) No. of batteries supplied 2 Nos. (11) Voltage (AC) (V) 220- 240 (12) Voltage (DC) (V) 18 (13 Wight with battery pack (kg) 3 (14) One year onsite warranty, installation & training free of cost make Eibenstock/Milwaukee or equivalent . (Inspection by Consignee)

Highly Galvanised anti vibration self locking nut Set bolt with reusable washer lock arrangement at any torque for P-bracket. Make "RASY" or similar, size M20X120, PART NUMBER (N-NUT, BBOLT & W-WASHER)- N20120P (NUT) B20120P(BOLT) W20120P (Washer). DRG No SP-02, SP-03, S&T workshop Byculla (Inspection by Consignee)

Supply and Fixing of Protective mesh of metal Numbers 12 SWG of size L(24)x W(12)x D(18) inches for Calling on signals with necessary clamps and accessories. (Inspection by Consignee)

Limit Switch new top roller type with 2 Numbers NO+2NC contacts as per RDSO specification no IRS/S41/70 or Latest amendment suitable for Heidz make electrical lifting barrier of Indian railways. Make: Jay Balaji, L&T, Seimens (Inspection by Consignee)

3 pole power contactors with coil voltage Numbers suitable for 110VAC coil with minimum 9A current rating , inbuilt 1NO+1NC auxiliary contacts suitable for use in Indian Railway Electrically operated gates. Make: Schneider, L&T, Siemens, Havells.(Inspection by Consignee)

Timing Belt type length 285/300 width 18mm Numbers suitable for Heidz Electrical Lifting barrier in Indian Railways as per RDSO/SPN/180/2005. Make: Heidz, Optibelt 2R, Mecoy or similar. (Inspection by Consignee)

Push Button element: 1NO or 1 NC contact Numbers element min. 5 Amps rating with screw type fixing of RDSO approved. (Inspection by Consignee)

Supply of Push Button Actuators. Push Button Numbers with screw type fixing.(Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Rotary Switch (Change over programme with Numbers OFF) suitable for 10A / 440V AC / 2 Pole / 2 way / Two position ON, Two position OFF, 90 degree apart with complete rotation, FLAG Knob. Salzer make or similar Cat No. S10-61153-B13. (Inspection by Consignee)

Supply of lateral filing cabinet/sliding door unit Numbers 3 feet to store circuit diagram with two drawer type Godrej or Kompress or Allwyn make. (Inspection by Consignee)

Supply of single line caller ID hand free Numbers telephone with speaker of make Beetel M 53 or latest with RJ 11 rosettes and 3 No. of pen torch cells Eveready or Novino to be supplied with each instrument as per specification and warranty of 01 year.(Inspection by Consignee)

Supply of STP (shielded Twisted Pair) CAT-6 Boxes cable from D-Link, Finolex., Lucent or DAX Make (1 Box-305 mtrs). (Inspection by Consignee)

Laying of CAT 6 cable with proper identification Metre marks and as per the instruction of site engineer.

Supply of on line UPS with isolation transformer Numbers suitable for signal phaseAC input & single phase AC output, floor mounted type. Rating of UPS 3.0KVA, indicative back up time 120 minutes, make APC or Immerssion or Microtek or Champion with SNMP module card installed in UPS.(Inspection by Consignee)

Supply of Optical Fiber Termination and Numbers Distribution Management System for 48 Core OFC fully loaded with Pigtails and Couplers Make Raychem/R&M or 3M equivalent. (Inspection by Consignee) Total 1366384.76