SPL REPAIR TO WOODEN KITCHEN CABINETS/CBS OF OFFRS MD ACCN AT ANJALEE/ PINE WALK COMPLEX ETC AND SPL REPAIR TO MISC B/R SERVICES IN CERTAIN MD ACCN OF SIG COY UNDER GE SHILLONG

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each including make good complete all as specified and as directed.

Taking down shutters of any description but not exc 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complet all as specified and as directed.

S&F stainless steel three self pullout basket of size 150x485x530mm complete all as specified and as directed.

S&F plain stainless steel basket of size 520x485x200mm complete all as specified and directed.

S&F plain stainless steel plate basket of size 520x485x200mm complete all as specified and directed.

S&F plain stainless steel cup & saucer basket of size 520x485x100mm complete all as specified and directed.

S&F plain stainless steel perforated cutlery basket of size 520x485x100mm complete all as specified and directed.

S&F plain stainless steel grain trolley of size 520x485x350mm complete all as specified and directed.

S&F ball bearing drawer channel of size 500 mm long complete all as specified and as directed.

Material and Labour for 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Material and Labour for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

Material and Labour for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Supply and fix for 75mm long Butt hinges, medium weight, stainless steel, complete all as specified and as directed.

Material and Labour for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Material and Labour for 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, frame-work as in kitchen cabinet/cup-board completed all as specified and as directed.

Supply and fix 150mm long aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and as directed.

Supply and fix Continuous (Piano) hinges, stainless steel, bright finish or electrogalvanised width of flaps 30 mm (when open) complete all as specified and as directed.

Supply and fix Extruded brass bow handles, of 150 mm size, fabricated type, polished complete all as specified and as directed

Supply and fix Magnet catches for cupboard/ cabined shutter, brass body and striking plate including letting in and fixed complete all as specified and as directed

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital, similar pattern as in roof coverings. complete all as specified and directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed.

Dismantling wall and ceilling boards of any description including cover fillets complete all as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work).

Dismantling timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work complete all as specified and as directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed.

S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.

M&L 2nd class hard wood in scantling clean sawn timber, timber framed & fixed complete all as specified and directed.

Material and Labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering / cladding including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base of floor complete all as specified and directed

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for non skid ceremic coloured tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L 12 mm thick Plywood (07 Nos of ply) , grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered). complete all as specified and directed.

M&L for rendering 10mm (cement plaster 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed.

M&L for rendering 15mm (cement plaster 1:4) thick on the other side of lathing with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and directed.

Supply only Integral waterproofing compound

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Dismantling water tanks exc 250 ltrs but not exc 500 ltrs capacity , complete all as specified

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item above here–in–before, but for 20mm dia (Bore).

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified & directed.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and directed.

M&L for Plain Cement concrete Type C1, 1:3:6 (using 20 mm graded stone aggregate) any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm , resecuring, adjusting if any and refixing in same opening complete all as specified and directed.

M&L 100mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub base complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 Grade complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed.

S&F mild steel as in aerial mast , water tank staging and the like incl caps , bases splices etc builtup from two or more beam or channel sections or angles with plates incl all lattice bars stiffers gussets etc of gde Fe-290(Gde E-165) complete all as specified and as directed

Complete removal existing treatment of wall and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and as directed.

M & L for preparation of new/ old plastered/concrete surfaces of walls, applying 1 mm thick of wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and directed.

M & L for preparing newly plastered surfaces of brick work or concrete walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M/S U.K ENTERPRISE (BID ID -3297098)

S K Construction (BID ID -3297017)

M/s M.L Consortium (BID ID -3296701)

Bharara construction (BID ID -3296755)

M/s A L Traders (BID ID -3296859)