8350/E8

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc.and getting out in soft / loose soil. complete all as specified and directed.

Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25Cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft / loose soil complete all as specified and directed.

Removing excavated material of soft / loose soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and Labour for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Dismantling asbestos cement ( corrugated ,semi corrugated sheets etc) sheets in roof coverings complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section for Unframed work complete all as specified and as directed.

Dismantling timber scantling Under 40 Sqcm in section for fillets, rails, post rafters, purlins etc for Unframed work complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connection complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connection complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 Cm thickness. (below or above ground level) complete all as specified and directed.

Material and Labour Material and Labour Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. .

Material and Labour RCC Type B-1 (1:2:4 Using 20mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) for embedding holdfast, bed block, coping cills, etc including necessary form work complete all as specified and directed.

Material and Labour Brick work with Pulverized fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Material and Labour Brick work with pulverized fly ash bricks of designation 7.5, straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and directed

Materials and Labour Formwork for rough finished surfaces to the soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Supply and fix 35mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 35mm thick 2nd class hard wood glazed & skeleton door shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

Supply and Fix 1.25mm thickness of laths Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including taking down old unserviceable one complete all as specified and as directed.

Supply and fix Ball bearing for rolling shutters complete all as specified & directed by the Engr-in-Charge.

Supply and fix Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified & directed by the Engr-in-Charge.

Supply and fix aluminium anodised 2mm thick powder coated , three track sliding window frame with shutters as per Drg no. CWE/KOL/TD-33 of section No. 1F-1F including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and stainless steel wi\re cloth of 0.36mm nominal dia of wire fitted with screws and washer. The section of frame and shutter is as under complete all as specified and as directed:- Note:- Cost of wire cloth and glazing shall be measured and paid separately under relevant items of this schedule.

Supply and fix 200mm Stainless steel barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100mm long butt hinges stainless steel complete all as directed.

Supply and fix 100 mm Stainless steel handles 'D' type complete all as specified and as directed.

Supply and Fix 300mm Stainless steel sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fix stainless steel door stopper of suitable size complete all as dirceted by Enginneer-in-Charge.

Material and Labour for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Supply and fix Drappery rod made of electric resistance welded MS pipe of 21mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic complete all as specified and as directed.

Supply and fix closed type stainless steel bracket for drappery rod fixed to wall with fixing arrangements complete all as directed by Engineer in Charge.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and Fix Mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410W(GdeE-250) quality B complete all as specified and as directed.

Supply and Fix steel work in tubular truss including special special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161, 1979 grade St-240 complete all as specified and as directed.

Supply and Fix Mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe-290W(GdeE-165) complete all as specified and as directed.

Supply and fix Miild steel screw bolts (machine made) diameter of neck 11mm to 18mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt 22.50mm to 30 mm long complete all as specified and directed.

Supply and fix TMT steel bars 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Supply and fix Expanded metal, cut to length, n.exc 4 Kg per Sqm and fitted with mild steel nails complete to wood or steel members complete all as specified and directed.

Supply and fix Pressed steel frames of size 105mm x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed steel frame shall be filled with PCC type C0 ( 1:3:6, using 12.5mm graded crushed stone aggregates) and cost of same shall deemed to be included in the rate quoted by the tenderer in this Item.

Supply and fix Pressed steel frames of size 125mm x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note:- Pressed steel frame shall be filled with PCC type C0 ( 1:3:6, using 12.5mm graded crushed stone aggregates) and cost of same shall deemed to be included in the rate quoted by the tenderer in this Item.

Supply and fix 4mm thick suspended non asbestos fibre cement non asbestos building boards similar to E- board classic placed in the grid of size 605 x 605 mm with aluminium anodised angle/channel/Tee section fixed with screw duly suspended with 4 mm dia GI hanger fixed with GI hooks 4 mm dia and fastner as required at the site including two coats of acrylic distemper complete all as specified and directed by Engr-in-Charge . Details of section are as Under :- (i) Aluminium angle 25mm x25mm x1.5mm thick. (ii) Aluminium Cross Tee 25mm x25mm x1.5mm thick. (iii) Aluminium main TEE 25mm x38mm x1.5 mm thick.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated / semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and ridge, fixed with self tapping screws complete all as specified and directed.

Material and Labour Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

Material and Labour for 75 mm thick, plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base for flooring complete all as specified and directed.

Material and Labour for 75 mm thick, plain cement concrete 1:2:4, type B2 (using 40 mm graded stone aggregate) as in flooring, finished the surface even and fair without using extra cement including making impression of expanded metal, whilst the concerete is green complete all as specified and directed.

Material and Labour for 25 mm thick, plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in sub base etc complete all as specified and directed.

Materials and labour for non-skid, ceramic, joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc,set and jointed in neat cement slurry and jointed in white or coloured cement to matcht etc over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Materials and labour for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc,set and jointed in neat cement slurry and jointed in white or coloured cement to matcht etc over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Materials and labour for non-skid, joint free ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, etc,set and jointed in neat cement slurry and jointed in white or coloured cement to matcht as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles.

Materials and labour Heavy duty exterior grade vitrified tiles ( full chrged) of size 300mmx 300xmm x7 to 10mm thickness as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including cement screed bed 15mm thick in cement mortar 1:4 complete all as specified and as directed.

Material and Labour 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) including dismanteling of old unserviceable stone slab complete all as specified and directed.

Materials and labour Mirror finished grinding works with machine grinder and polishing of kota stone slabs etc as in old floor, cooking platform, shelf etc complete all as directed by Engineer-in-Charge.

Supply and fix 4.8mm thick tinted sheet glass, ordinary type with oil putty, in square exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Material and Labour Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour Rendering 15mm (10 + 5 mm) thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each mixed with integral water proofing compound @ 2% by weight of cement (WPC shall be mixed with top layer only i.e 5mm thick) finished the surfaces even and smooth without using extra cement complete all specified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only" item under relevant item of these schedule.

Material and Labour Rendering 5 mm thick in Cement mortar 1:3 as in ceiling concrete surfaces finished the surfaces even and smooth without using extra cement complete all specified and as directed.

"Supply only"lequid water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ SIKA

Materials and labour Complete removal of existing treatment old internal surfaces and applying two coats of Acrylic distemper of any colour / tint over a coat of wall care putty white cement based and primer complete all as specified and directed.

Materials and labour Preparation of newly plastered wall surfaces of any description and applying two coats of acrylic distemper of any colour / tint over a coat of primer and white cement based putty complete all as specified and directed.

Materials and labour Preparation of newly plastered exterior wall surfaces of any description and applying two coats of exterior emusion paint with silicon additives of any colour / tint over a coat of primer upto any height of building including scaffolding with safety measure complete all as specified and directed.

Materials and labour complete removal of existing treatment exterior wall surfaces of any description and applying two coats of exterior emusion paint with silicon additives of any colour / tint over a coat of primer upto any height of building including scaffolding with safety measure complete all as specified and directed.

Materials and labour Cement based paint of any colour/ tint , two coats over a coat of primer on newly plastered external surfaces including necessary preparation of surfaces complete all as specified and directed.

Material and Labour Preparation of new steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint of any colour/ tint over a coat of red oxide primer complete all as specified and directed.

Material and Labour Preparation of new wooden surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint of any colour/ tint over a coat of pink primer complete all as specified and directed.

Material and Labour Preparation of old steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint of any colour/ tint complete all as specified and directed.

Supply and fix 20mm outer dia CPVC pipes SDR 13.5 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed.

Supply and fix 25mm outer dia CPVC pipes SDR 13.5 & plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed.

Supply and fix 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc upto any height of building including necessary scaffolding including taking down old unserviceable PVC(SWR) pipe with fittings complete all as specified and directed.

Supply and fix 110 mm bore, PVC (SWR) pipe, double socketed, in any length with rubber ring joints fixed to wall etc upto any height of building including necessary scaffolding complete all as specified and directed including taking down old unserviceable PVC(SWR) pipe with fittings.

Supply and fix 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed .

Supply and fix 110 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and as directed.

Supply and fixing in repairs Bib cock 15 mm bore cast copper alloy chromium plated with crutch or butterfly handle screwed for iron pipe or for brass ferrule etc complete all as specified and directed. Make- Essco Cat Part No. MQT-511KN or Equivalent model from Make:- MARC/ JAQUAR.

Supply and fix sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Make:- Nirali / Bluestar/ Neelkant/ Prayag.

Supply and fix Rotational moulded HDPE water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked including 25mm bore PTMT ball valve with epoxy coated Aluminium rod and high density ball complete all as specified and directed including taking down old unserviceable tank with accessories . Make:- Sintex / Polycon

Taking down carefully any type of point wiring (light, fan, bell, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets ( excluding light fittings) etc stacking at site for reuse of serviceable items and removal of unserviceable items from site and making good disturbed faces of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed by the Engineer-in-charge.

Material and labour Point wiring with PVC insulated and unsheathed FR grade cable single core multistranded copper conductor 1.5 Sqmm size, 1100 volts grade cable confroming to IS - 694 1990 drawn through and including PVC casing and caping of suitable size with all accessories including fabricated 1.6mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 Sqmm multistranded PVC insulated FR grade and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one switch and switch socket outlet point / ceiling fan/ exhaust fan point on independent board complete all as specified and as directed.

All as per item No. 87.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with casing caping complete all as specified and directed by Engineer in-charge.

All as per item No. 87.00 here-in-before but using 2.5 Sqmm size stranded copper conductor cable, FRLS grade for one 16 Amp switch/ socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable sub main wiring of any type and making good the disturbed surfaces complete all as directed by Engineer-in-Charge.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated FR type, unsheathed stranded copper conductor of size 4 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 2.5 Sqmm FR type as earth lead drawn in and including rigid non metallic PVC conduit 20mm external dia, ISI marked complete all as specified and as directed. Note:- One run of 4 Sqmm cable and one run of 2.5 Sqmm cable with one run of PVC conduit shall be measured as one unit.

Supply and fix Socket outlet 2 in 1, 3 pin 5 /6 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5 /6 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5 /15 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix Switch piano flush type, single pole one way 6 Amps complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite three terminals 230 volts complete all as specified and as directed.

Supply and fix Lamp holder , PVC / polycarbonate type with back plate for batten fittings complete all as specified and as directed.

Supply & fix in repairs LED lamp of 12/15 watts including necessary connection complete all as specified and as directed by Engr-in-Charge. Make:- Havells cat Part no.LHLDDEEEML8R015 or Make:- Surya cat part No.12W NEO PLUS LED LAMP 6500K or make:- RASHMI Cat part No. RLBU12MP

Supply and fix Electronics fan regulator, step type, solid state AC 240 Volts, white / Ivory finish complete all as specified and as directed.

Supply and fix Sheet steel phosphorised powder coated neutral link earth bar DB's double door/ Metal door where MCBs to be used 4 way Tripple pole and neutral with 200 amps rated bus bar complete all as specified and as directed. Make:- Schneider/ ABB/Legrand/L&T.

Taking down old unserviceable and rusted DB of any size and type alongwith MCB of various capacities and making good the disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fix Sheet steel phosphorised powder coated neutral link earth bar DB's double door/metal door where MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed . Make:- Schneider/ ABB/Legrand/L&T

Supply and fix Sheet steel phosphorised powder coated neutral link earth bar DB's double door/metal door where MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar complete all as specified and as directed . Make:- Schneider/ ABB/Legrand/L&T

Supply & fix LED tube light fittings suitable for 1x20 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection including taking down old unserviceable LED tube light fittings complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat No. LUMLINEPLUSBS20WLED865PCSS or make:- Cromton Cat part No. LDL 20 NW or Philips Cat Part No. BN021 LED 20S PSU CW GR S2.

Supply & fix LED Building security light 25/30 watt in aluminium PDC housing, toughened glass cover with IP66 protection with 0.5 mtr GI pipe of suitable size making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in lenght including taking down old unserviceable security light fittings complete all as specified and as directed. Make:- Crompton cat part No.LST-25-CDL-M or Make:- Surya cat Part No. SLE UL 25W IP66 (LXN) or Make:- Bajaj cat part No BCLST 30W LED I.

Supply and fix MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:- Schneider/ ABB/Legrand/ L&T.

Supply and fix MCB 40 Amps, SPN, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:- Schneider/ ABB/Legrand/ L&T.

Supply and fix MCB 63 Amps, SPN, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:- Schneider/ ABB/Legrand/ L&T.

Supply and fix Isolator 63 Amps, 415 Volts, TPN complete as directed by the Engr-in-Charge. Make:- Schneider/ ABB/Legrand/ L&T

Supply & fix 100/120 watt capacity LED flood light fittings with all fittings arrangement with lamp and driver including die cast aluminium housing with heat resistance clear glass cover complete all as specified and as directed. Make:- Surya Cat Part No. SLE FL 100W IP66 LUMOS or Make:- Crompton Cat part No. LFLN-120-CDL/60-M or Century LED Cat part No. FWZP120C0839.

Supply and fix Exhaust fan AC single phase 240 V of size 300mm sweep, 1400 RPM with louver specially designed by Kitchen in domestic ventilation metal body and blade powder coated metallic finish heavy duty motor and protective bird guard including cutting the existing brickwall in square / round type suitable for fixing exhaust fan including cement work with grouting 4 nos long bolts, nuts, washer and making good to disturbed surfaces with cement mortar 1:3 and finished the surface with two coats of acrylic distemper of existing finish over a coat of primer complete all as specified and as directed by engineer-in-Charge. Make:- USHA Cat part no. 300mm S.PH TURBO HDEF 1400 RPM GREY ISI or Make:- Crompton cat Part no. EXHD300-4-1 or make :- Havells cat Part No.TURBO FORCE SP.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Supply and fix Ceiling fan AC Single Phase 240 Volts of size 1200mm sweep, metal body and 3 blade, including all fixing arrangements 'S' hook completeall as specified and asd irected. Make:- Usha cat part No. NABILA 1 STAR W/OREG or Make:- Havells cat part No.SS 390 METALLIC or Crompton cat part No.Aura metallic.

Supply and fix Fully automatic star delta starter with steel enclosure AC 3 Phase, 415 volts 50 Hz, type ML-1.5, relay range 14-23 amps suitable for pump motor set complete all as directed by Engineer-in-Charge. Make:- L&T cat part No. SS95894 or equivalent model from make:- ABB/Schneider/ Legrand/ Siemens.

Supply and fix MCCB 3 Pole, 415 Volts, adjustable type, 25-100 amps with breaking capacity 16 kA complete all as specified and as directed. Make:- L&T/ ABB/ Siemens/ Schneider/ Legrand.

Supply and fix Power supply unit consisting of starter with 11-18 Amp over load protection, MCB of 25 Amp with socket complete for AC 240 Volt single phase including taking down old unserviceable one complete all as specified and directedby Engr-in-Charge. Make: Havells Cat Part No DHDUCDP0253016-25 or Make:- C&S cat Part No.CG26405PWNR

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 3 core fixed along the building wall with clamp etc including connection complete all as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 2 core fixed along the building wall with clamp etc including connection complete all as directed by the Engr-in-Charge .

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 4 core fixed along the building wall with clamp etc including connection complete all as directed by the Engr-in-Charge including taking out old unserviceable XLPE cable.

Supply and fixin Mild steel pipe, 40mm bore,medium grade with all fittings, laid in floor , walls or ceiling for cable proction complete all as specified & directed.

Supply and fixin repairs Galvanized iron pipe, 40mm bore, light grade with all fittings, laid in floor , walls for cable proction complete all as specified & directed.

Material and Labour Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. including taking down old unserviceable earth plate with all broken/ rusted/ unserviceable accessories

BHARUKA ENTERPRISES

Tirupati Buildcon Pvt. Ltd.

S.S.ENTERPRISE

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

Rounaq Enterprise

M/S J S ENTERPRISES

J B NATH AND SON