REPAIR/MAINT OF CEILING, EXHAUST, WALL MOUNTED FANS, GEYSER FITTINGS AND FIXTURES, EARTHING AND REPLACEMENT OF U/S METER BOXES AT MIL STN TALBEHAT

Amount

GEYSER :-

Taking down un serviceable Geyser having complete damaged Inner/Outer tank any capacity and type.

Supply and fix in repair Geyser element of 1500 watt (Screw/Cup type) suitable for 25/35 litre geyser of any make and type as directed by Engineer-In-Charge.

Supply and fix in repair Geyser element of 2000 watt (Screw/Cup type) suitable for 50 litre geyser of any make and type as directed by Engineer-In-Charge.

Supply and fix in repair indicator lamp suitable for 25/50 litre geyser of any make and type as directed by Engineer-In-Charge.

Supply and fix in repair 3 core PVC sheathed flexible cable of size 1.5 sqmm complete as directed by Engineer-In-Charge.

Supply and fix in repair of inner tank (Steel) of Geyser 50 litre capacity complete as directed by Engineer-In-Charge.

Supply and fix in repair of inner tank (Steel) of Geyser 25 litre capacity complete as directed by Engineer-In-Charge.

Supply and fix in repair of outer tank/cover (Steel) of Geyser 50 litre capacity complete as directed by Engineer-In-Charge.

Supply and fix in repair of outer tank/cover (Steel) of Geyser 25 litre capacity complete as directed by Engineer-In-Charge.

Supply and fix in repair of Aperture plate (On which Heating Element and Thermostat switch Installed) of Geyser 25/50 litre capacity complete as directed by Engineer-In-Charge.

Supply and fix in repair of metallic pipe connector flexible 15 mm bore (For hot & cold water) including two nos CP brass coupling, 250 mm long complete as directed by Engineer-In-Charge.

Supply and fix in repair of thermo state switch suitable for 25/50 litre Geyser complete as directed by Engineer-In-Charge.

Supply and fix in repair of safety valve 15/20 mm dia as requirement of site suitable for 25/50 litre Geyser complete as directed by Engineer-In-Charge.

Supply and fix in repair of fusible plug 15/20 mm dia as requirement of site suitable for 25/50 litre Geyser complete as directed by Engineer-In-Charge.

Supply and fix in repair plug top, 3 pin, 15 Amp for 25/50 litre Geyser complete as directed by Engineer-In-Charge. Make:- Anchor/CONA/HAVELLS.

S&F in replacement single pole and neutral enclosure with a two pin and earth socket complete with one single pole MCB of 20 Amp 240 volt. Make:- Legrand/Havells/ABB.

M&L for Grouting of fast nut in replacement 150 mm long and 16 mm dia in wall with drilling arrangement/by suitable aggregate of cement and sand, for fixing of Geyser complete with one nut and one washer.

CEILLING/EXHAUST FAN :-

M&L for rewinding of ceiling fan, 1200-1400 mm sweep, AC 220 volt, Single phase, 50 Hz, of any make, Model and vintage with super enamelled copper wire with same gauge and turn with and including top quality of insulation material such as varnish, cotton tape and sleeve etc., Including painting one coat of white synthetic enamel paint on body and blade also and marking Fan No on that. Complete all as specified and directed by Engineer-In-Charge.

M&L for rewinding of Exhaust fan, 225-300 mm sweep, heavy duty, AC 220 volt, Single phase, 50 Hz, of any make, Model and vintage with super enamelled copper wire with same gauge and turn with and including top quality of insulation material such as varnish, cotton tape and sleeve etc., Including painting one coat of smoke grey synthetic enamel paint on body and blade also and marking Fan No on that. Complete all as specified and directed by Engineer-In-Charge.

M&L for rewinding of Exhaust fan, 400-450 mm sweep, heavy duty, AC 220 volt, Single phase, 50 Hz, of any make, Model and vintage with super enamelled copper wire with same gauge and turn with and including top quality of insulation material such as varnish, cotton tape and sleeve etc., Including painting one coat of smoke grey synthetic enamel paint on body and blade also and marking Fan No on that. Complete all as specified and directed by Engineer-In-Charge.

M&L for rewinding of wall mounted fan, 300-450 mm sweep, heavy duty, AC 220 volt, Single phase, 50 Hz, of any make, Model and vintage with super enamelled copper wire with same gauge and turn with and including top quality of insulation material such as varnish, cotton tape and sleeve etc., Including painting one coat of existing colour synthetic enamel paint on body and blade also and marking Fan No on that. Complete all as specified and directed by Engineer-In-Charge.

S&F in replacement of ball bearing No.6201. Make:- SKF/NBC/Tata.

S&F in replacement of ball bearing No.6202. Make:- SKF/NBC/Tata.

S&F in replacement of ball bearing No.6203. Make:- SKF/NBC/Tata.

S&F in replacement of ball bearing No.6204. Make:- SKF/NBC/Tata.

S&F in replacement of Gun Metal Bushes for ceiling fans. Make:- SKF/NBC/Tata.

S&F flexible copper cable of size 23/0.0076, 2 core, for ceiling and exhaust fan complete for connection and directed by Engineer-In-Charge.

S&F in repair of MS clamp for holding ceiling fan with nut, bolt & split pin etc., complete all as specified and directed by Engineer-In-Charge.

S&F in replacement Ceiling fan blade 1200-1400 mm sweep (Set of three) complete all as specified and directed by Engineer-In-Charge.

S&F in replacement Canopy Suitable for Ceiling Fan of any make and size complete all as specified and directed by Engineer-In-Charge.

S&F in replacement exhaust fan blade 300 mm sweep complete all as specified and directed by Engineer-In-Charge.

S&F in replacement wall mounted fan blade 300 mm sweep complete all as specified and directed by Engineer-In-Charge.

supply and fixing capacitor 3.15 mfd suitable for exhaust fan/ceiling fan complete all as specified and directed by Engineer-In-Charge. Make:- Epcos/Asian/Tesla.

Supply and fixing capacitor 2.5 mfd suitable for ceiling fan complete all as specified and directed by Engineer-In-Charge. Make:- Epcos/Asian/Tesla.

M&L for cutting of hole 300mm dia at 9" wall for exhaust fan including PCC (1:3:6) type C-1 and one coat of existing white wash over disturbed area complete all as specified and directed by Engr-in-Charge.

Fixing only repair digital Meter in replace of defective meter proper wiring by lugs complete all as specified and directed by Engr-in-Charge (Note: Repair Meter provided by the Department on no cost basis in (E/M) yard)

M&L for sub main wiring with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistranded and including flexible PVC conduit of 25 mm external dia for digital meter connection complete all as specified and directed by Engr-in-Charge.

M&L for cutting exceeding 20cm girth chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,

S & F for Rigid non-metallic PVC 20mm dia conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

M&L for cutting of PCC/roads for earthing pipe including PCC (1:3:6) type C-1 for disturbed area complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing GI tubes light grade 25 mm dia, on support of cables, on pole/wall/laid in floor/in trenches including clamp and nut bolts.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 8 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh and necessary testing on completion complete all as specified and as directed.

Note :- 1) Disconnection of Geyser and fans from electric source, inspection of problem, taking down to ground, and transportation from site to market for repair/brazing will be deemed to be included in the rate quoted by the contractor without incurring any extra cost to the department. 2) Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S SHIVA TRADERS

M/S Kharya Associates

HARNAM SINGH ANIL SINGH