SPECIAL REPAIRS TO SENIOR SAILOR BLOCK BLDG NO P-270 AT INHS DHANVANTARI AT MINNIEBAY

Amount

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for.

Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

Supply and fix prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

Supply and fix prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

Supply and fix Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade St - 240, Medium Grade of any dia complete all as specified and as directed.

Material and labour Roof trusses (framed), trusssed, purlings, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee,angle,Channel or flat sections) including distance pieces, cleats etc.

Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A.

Supply and fix Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but n.exc. 10 cm long.

Supply and fix aluminium flat 25 X 6mm size as wind tie fixed with 50mm/75mm aluminium self tapping screws.

Material and labour for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Supply and fix Rotational moulded polyethylene water storage tanks of 2000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified including dismantling of old damaged tank complete.

Supply and fix 25mm dia gun metal gate valves with iron wheel head screwed both ends for iron pipe .

Supply and fix 32mm dia gun metal gate valves with iron wheel head screwed both ends for iron pipe.

Supply and fix 25mm bore brass ball valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed.

Material and labour for providing cement concerte type B0 (1:2:4) using 20 mm graded aggregate as in roof, kerbs or mud stops complete

Material and labour for non shrink high strength IPH 411 cementitious micro concrete mix with 12.5 mm graded stone aggregate laid to a thickness of 50 to 60 mm inside of columns, beams, jacketing of columns and similar structural members as per manufacturer instructions including use and waste of water tight formwork to facilitate pouring of micro concrete all as per specified and directed by Engr-in-charge.

Demolition of floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises outside MD land, all as specified and as directed.

Material and labour for coloured non-skid/matt finish ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6)

Material and labour for glazed ceramic tiles 450x350x 7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed

Material and labour for vitrified tiles 10mm thick square/ rectangular polished double charged area exceeding 0.36 sqm in floors, skirting but n. exceeding 0.42 Sqm set and jointed in cement slurry and pointed in tile joint filler to match the colour or tiles over a screed bed of 15mm thick in CM 1:4 all as specified and as directed.

Demolition of cement concrete in floors and pavings n exceeding 15 cm thickness (above or below GL)

Material and labour for 50mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed.

Demolition of Precast Concrete work/ precast concrete block built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

Material and labour precast cement concrete block masonry with solid block, exceeding 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling stone slab of any description or thickness in floors approns etc

Material and labour Granite (of any type) 16 to 18 mm thick machine cut fixed on slab,window cill, Steps, Vertical surface etc, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, moulding & polishing over 15mm thick screed in CM (1:6) all as directed by Engr in charge

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

Material and labour for preparation of existing plastered wall surfaces and applying one coat of acrylic emulsion based premium quality matt finish exterior antifungal paint all as per manufacturer's instructions complete all as specified and as directed

Material and labour for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement.

Taking down Steel/CPVC tubing 15mm dia and connections including cleaning for refixing or removal to store.

All as per item 37.00 above but 20 mm dia

All as per item 37.00 above but 25 mm dia

All as per item 37.00 above but 32 mm dia

Supply and laying of CPVC pipes 15mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 32mm dia outer bore SDR 11 & plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and fixing 15 mm outer dia CPVC elbow with brass threads

Supply and fixing 20 mm outer dia CPVC elbow with brass threads

Supply and fixing 20 x 15mm outer dia CPVC elbow with brass threads

Supply and fixing 20mm outer dia CPVC female adaptor with brass threads (FTA/FBTA)

Supply and fixing 25mm outer dia CPVC female adaptor with brass threads(FTA/FBTA)

Supply and fixing 32mm outer dia CPVC female adaptor with brass threads(FTA/FBTA)

Supply and fixing 16 mm outer dia CPVC Tee with Brass Threads

Supply and fixing 20 mm outer dia CPVC Tee with Brass Threads

Supply and fixing 20mm outer dia tank connector

Supply and fixing 25 mm outer dia tank connector

Supply and fixing 20mm outer dia union

Supply and fixing 25 mm outer dia union

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth

Material and labour for complete removal of existing treatment on wall & finishing the surface with 3 mm thick wall care putty & applying two coat of oil bound distemper along with primer all as specified

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer and 3mm thick wall care putty all as specified and as directed.

Material and labour for preparation of old distempered or plastered surfaces of ceiling and applying one coat of oil bound distemper, all as specified.

Material and labour for preparation of old wooden surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint, all as specified.

Material and labour preparation of old steel surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint, all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame).

Taking down carefully Aluminium window/ventilator frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) and refixing the same at same opening after repair of window cill all as specified and directed .

Taking down care fully Aluminium window/ventilator frames exceeding 1.5 Sqm but not exceeding 4 sqm (with shutters & grill (if fixed) without taking off shutters from the frame) and refixing the same at same opening after repair of window cill all as specified and directed .

Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame)

Supply and fix Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

Supply and fix Anodised Aluminium frames for Partition, Door, Windows ,sliding shutters and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skeleton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary Aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame all as specified and directed NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc. (ii) Supply only 5mm thick sheet glass and aluminium wire cloth be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

Supply only 5mm Plain glass ordinary quality ,in square exceeding 0.5 sqm each.

Supply only Aluminium anodised XPM 1.50mm x3.00mmsize for mosquito proofing 22gauge thick complete all as specified and as directed.

Supply only stainless steel friction stay hinges of standard size.

Supply only standard aluminium window handles 125 mm long for Aluminium windows/ ventilators

Supply only butt hinges of stainless steel 100 mm long ISI marked fixed with brass screws

Supply and fix second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Supply and fix second class hard wood plain framed panelled shutters (any number of panels), 35mm thick with panels of plywood flats complete all as specified and directed.

Supply and fix second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

Material and labour preparation of new wood/wood based surfaces of exceeding 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer

Material and labour Second class hard-wood clean sawn in scantlings framed and fixed

Supply and fix Aluminium anodised sliding door bolts 300mm long.

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long.

Supply and fix extruded aluminium alloy handle fabricated type anodised 100mm long.

Supply and fix extruded aluminium alloy handle fabricated type anodised 150mm long.

Supply and fix butt hinges of cast brass with mild steel pin, bright polished 100 mm long ISI marked fixed with brass screws

Supply and fix Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Supply and fix in repairs vitreous china counter top wash hand basin, white colour of size 550mm including fixing on granite slab 32 mm waste coupling brass chromium plated suitable for was hand basin with long screw shank and fly nuts & PVC waste pipe complete all as specified and as directed. Make :Jaquar Cat part code No. FLS-WHT-5701 or Equivalent in Somany, Parryware and Cera.

Supply and fix in repairs to Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. Make- Jaquar Cat part No COS-047KN or Equivalent in Johnson or Marc

Supply and fix in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore, including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed. Make: Jaquar Essxo o or Equivalent in Johnson or Marc

Supply and fix Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed. Make: Jaquar Cat part No CON-059KN or Equivalent in Johnson or Marc

Supply and fix Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. Make: Jaquar Cat part No CON-041KN or Equivalent in Johnson or Marc

Supply and fix in repairs brass chromium plated telescopic Hand shower(Health Faucet)(ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish & wall Hook all as specified Make:Jaquar Cat No:ALD-CHR-585 or Equivalent in Johnson or Marc

Supply and fix brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed. Make: Jaquar Essxo Cat part No COS-ESS-103041 or Equivalent in Johnson or Marc

Supply and fix Soap Dish, Vitreous China, White of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed.

Supply and fix Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. Make: Jaquar Cat part No CON-011KN or Equivalent in Johnson or Marc

Supply and fix in repairs vitreous china Anglo Indian WC with normal closing seat cover, white with P or S trap, front or back inlet and foot rest complete including provision of PCC (1:5:10) bedding, all as specified. Make:Jaquar Essxo Cat part No ECS-WHT-355PN or Equivalent in Johnson or Parryware

Supply and fix in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed.

Supply and fix in repairs Vitreous China Urinal, Half stall type of size 375X315X620mm white complete all as specified and directed Make Jaquar Cat Part No. 132530 or equivalent in Neycer/ CERA/ Hindware/ Parryware

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Supply and fix in repairs PVC flexible connection, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank etc, all as specified.

Supply and fix hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Material and labour 6mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium framework with screws including preparation of surfaces and applying two coats of oil emulsion distemper.

Supply and fix in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down take pipes complete all as specified and as directed.

Supply and fix in repairs 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement

Supply and fix in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.

Supply and fix in repairs 18 mm plywood, grade BWP, type BB fixed in cup board shutters, shelves & partition.

Supply and fix in repairs plywood, grade BWP, type BB 12 mm thick 7 No of ply, fixed as panels of Aluminium door shutters, pelmet box, partition etc complete.

Material and labour 0.9mm thick Decorative laminates type I surface finish, colour and pattern as approved incl all necessary cutting to the size and pasting to the wood surface with and including approved synthetic adhesive as per manufacturer's instructions complete all as specified and as directed.

Supply and fix 30mm width continuous (piano) hinges mild steel finish or electrogalvanised all as specified.

Supply and fix 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix curtain Rod /Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc , 25 mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed.

Supply and fix brackets mild steel chromium plated suitable for curtain Rod 25 mm dia complete all as specified and as directed.

Material and labour for precast cover slab with 1:2:4 type B1 using 20mm graded stone aggregate incl cost of use and waste of clean sawn wooden form work but excluding cost of reinforcement all as specified incl removal of existing unserviceable cover slab.

Material and labour for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete, masonry etc any section, including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh, any type complete all as directed.

Excavating in post holes (or similar holes) each n exceeding 0.5 cu. m, getting out in hard / dense soil complete all as directed.

Material and labour for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete.

Material and labour for 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in sub base, plinth protection etc complete.

Material and labour Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with white cement and pigment, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer in charge.

Material and labour for MS work such as fencing post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 complete.

Supply and fix for PVC coated GI chain link fencing 3.5 mm dia with 50 x 50 mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts complete all as directed.

Supply only mild steel screw bolts 10 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends complete all as directed.

Supply only MS bars 10 mm dia for support to chain link fencing complete all as directed.

Supply only MS flat iron 40 x 6 mm as in fillets for securing wire mesh including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe-410-0 to Fe-310-0 complete.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Material and labour for point wiring with 1.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metallic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls & surface on ceiling/ roofs including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations , fan regulators etc as required with 3mm thick plastic laminated sheet top cover all as specified and as directed for the following points . Make:- Havells/plaza/polycab

(a) one light point controlled by one switch

(b) one ceiling / exhaust fan point controlled by one switch

(c) one three pin socket out let 5 amps on independent board complete.

(d) one three pin socket out let 5 amps on Same board complete.

(e) one call bell point controlled by one bell switch

(f) For one light point controlled by two 2 -way switches.

Material and labour for point wiring with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metallic concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 2.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely , surface in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for one 3 pin socket out let 15 amps on independent board with 3mm thick plastic laminated sheet top cover all as specified and as directed.-Make:- Havells/plaza/polycab

Material and labour for point wiring with 4 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts drawn through and including rigid non metallic concealed, conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 4 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, surface in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for one 3 pin socket out let 15 amps on independent board with 3mm thick plastic laminated sheet top cover all as specified and as directed -Make:- Havells/plaza/polycab Note for Sr. No 140, 141 & 142: Necessary PVC,rigid,concealed type junction boxes for identifying junction as required on site directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted

Supply and fix Switch Piano type 6A 240 Volts complete all as directed

Supply and fix switch piano two way 5A, SP, 230Volts.

Supply and fix bell push switch piano type 5 Amps SP complete all as directed Make:-Havells/Anchor/Cona

Supply and fix ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as directed Make:-Havells/Anchor/Cona

Supply and fix Switch Socket Combination, 5/6A - 2/3 pin complete all as directed Make:-Havells/Anchor/Cona

Supply and fix Socket outlet Combination, 15/16A - 2/3 pin complete all as directed Make:-Havells/Anchor/Cona

Supply and fix Socket outlet , 5/6A - 2/3 pin complete all as directed Make:-Havells/Anchor/Cona

Supply and fix Ceiling Fan regulator socketed step type , complete all as directed Make:-Havells/Anchor/Cona

Supply and fix Lamp holder, PVC/Polycarbonate angular type complete all as directed Make:-Havells/Anchor/Cona

Supply and fix bell, ding dong AC 230 Volts, single phase complete all as directed Make:-Havells/Anchor/Cona

Supply and fix LED base B12 (holder type) 7 watts complete all as directed, Make Bajaj, Wipro, Philips.

Supply and fix energy efficient LED security light fittings 25 Watts GreenLine Range with high power LED lamp and unique peanut lens to ensure uniform distribution, AC, 230 Volts, 50 HZ supply single phase including connection with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting all as specified and as directed of Make :Havells ENDURAPEARLSL25WLED757SASYTOPC or in Bajaj, Wipro, Philips.

Taking down Ceiling fan ceiling cable end, dismantling blades and removing fan and deposited to E/M store yard complete all as directed

Supply and Fix Energy efficient (5 Star rated) ceiling fan 1200 mm sweep single phase 230 / 240 volts AC with necessary fitting with down rod. canopy without fan regulator suitable for ceiling un complete and connecting up including provision of three core flexible PVC cable with stranded copper conductor of size 1.5 Sq.mm from ceiling rose to connector of ceiling fan all as directed and as specified. Make : Havells Cat No ES-40- 5 Star or equivalent in Bajaj, Khaitan, Usha,

Taking down old Exhaust fan & supply and Fix Exhaust fan continuous duty with louvers, double ball bearing. silent operation, rust proof body and blades with fixing arrangements Making hole including breaking of RCC walls in the Kitchen and making good of surface Complete of size 300mm sweep, 1400 rpm, 240V, all as Make Havells Ventil Air DB or equivalent in Bajaj, Khaitan, Usha, Note : Old Fan to be deposited to E/ M Store yard.

Supply and fix Single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp. Make :Legrand/L & T/C&S.

Supply and fix Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmental friendly energy efficient cap 20W LED 6000K etc. Make Havells lumilineBs20Wled865sPCWH or equivalent in Bajaj, Philips.

Supply and fix Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmental friendly energy efficient cap 9W LED 6000K etc. Make Havells lumilineBs9Wled865sPCWH or Bajaj, Philips.

Material and labour for sub main wiring with FRLS PVC insulated 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 2 x 6 sqmm & 1 x 6 sqmm of earth continuity conductor drawn through & including PVC conduit of 20 mm dia size and conduit accessories in wall connecting to common earth dolly all as specified and directed. Make:- Havells/plaza/polycab Note: (i)3 runs of cable & 1 run of conduit with necessary accessories will be measured as one unit length.

Material and labour for sub main wiring with 3 runs of 10 sqmm single core multistranded copper conductor FRLS PVC insulated cable confirming to IS specification with earth continuity conductor drawn through & including PVC conduit of 20mm dia size and conduit accessories in wall connecting to common earth dolly all as specified and directed. Make:- Havells/plaza/polycab Note: (i)3 runs of cable & 1 run of conduit with necessary accessories will be measured as one unit length.

Supply and Replace sheet metal enclosure powder coated ,MCCB DB, 'G' frame TPN vertical D/D, 6 way IP 43, prewired suitable for 125-160A MCCB, incoming bus bar, neutral links, blanking plates etc, all as specified and directed by Engineer-In-Charge. Make L&T DBVTL006GD or equivalent in Legrand & MDS.

Supply and fix 25 liters capacity electrical geyser white/half white, copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressure release valve/pressure reducing valve, non return valve, including new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed in same or new location as ordered as per manufacturers instruction with suitable size nuts & bolts, making necessary connection & testing on completion complete all as directed. Make- Havells GHWCAMTWH025 of Adonia or Bajaj, Racold. Note : Old Geyser deposited to E/ M Store yard.

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps.Neutral link, Earth bar, double door SPN 8 way 230volts all as directed. Make L&T, Legrand & MDS.

Supply and fix MCCB 125 A TPN 415 volts 25 KA Amps. Make L&T, Legrand & MDS.

Supply and fix MCB TPN 415 volts 63 Amps, 10KA. Make L&T, Legrand & MDS.

Supply and fix MCB Single pole 240 volts 6-32 Amps, 10KA. Make L&T, Legrand & MDS.

Supply and fix MCB SPN 240 volts 0- 32 Amps, 10KA. Make L&T, Legrand & MDS.

Earthing complete with GI earth plate electrode of size 60cm X 60cm X mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including GI strip 32 x 6mm dia size up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 40mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type B1 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009. Note : Earth strip beyond 7.5 mtr will be measured and paid separately under relevant item of this schedule.

Material and labour for PCC (1:3:6) type C1 using 20mm grade stone aggregate as in pole coping

Supply and fix Decorative Post - Top, 40 Watts for 360 degree indirect light Resistant to impact and corrosion, Glare free and better uniformity IP 65 protection. Make: Crompton, Model : MAPLE LPT0-40-CDL or Equivalent in Wipro, Philips.

Supply and fix LED Bollard Lights 9 W with Opal Diffuser & aluminium reflector 50 HZ . Make: C &S Model LTGLCW9W LED or Equivalent Wipro / Philips.

Supply and fix LED Focus Light 7 W Aluminium Die Cost Body with reflector Complete. Make: Luker Model :LSP 07 or Equivalent in Wipro, Philips.

Supply and fix LED Mirror Lights 10W AC 140 -265 Aluminium Die Cast IP 42 In door Type Complete . Make: Luker Model : LMR 10 or Equivalent in Wipro, Philips.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying cables in soft / loose soil all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as directed.

Removing excavated materials not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point all as directed.

Material and labour for road cutting for laying of LT UG cable /Galvanised Iron Pipe/Rex Pipe complete all as specified

Supply and laying in trenches, fixed on walls, passing through pipes, jointing and testing of electric cables, PVC insulated, PVC sheathed, galvanised steel strip or wire armoured electric power cables with stranded aluminium conductors 1100 Volts grade for the following sizes including disconnecting & taking out the existing unserviceable cables from trenches. Make : Universal/ Polycab/ Gloster.

2 Core 25 Sqmm

3 .5 Core 50 Sqmm

Supply & Laying of Telerex Double Wall corrugated HDPE pipe ISI marked of 77 mm (OD) and 63 mm (ID) polyethylene including coupler & Bend with smooth internal and profiled external surface for under ground cable protection complete all as specified. Make : Rex Poly Extrusion Ltd/ Tirupati Plastomatics Pvt Ltd

Supply & Laying of Telerex Double Wall corrugated HDPE pipe ISI marked of 50 mm (OD) and 38 mm (ID) polyethylene including coupler & Bend with smooth internal and profiled external surface for under ground cable protection complete all as specified. Make : Rex Poly Extrusion Ltd/ Tirupati Plastomatics Pvt Ltd

Material and labour for GI steel tubing medium grade for cable protection, passing under road/floor or for fixing to poles/walls all as specified and directed for the sizes 50 mm dia. Make : Tata / Jindal / Bansal

Supply and fix PVC Junction box Hinged Door of Size 140x140x95. Make: Sintex or Equivalent

Supply and fix PVC Junction box Hinged Door of Size 250x200x105. Make: Sintex or Equivalent

RS ENGINEERING WORK

M/s Pintu Furniture

NAVJEEVAN ENTERPRISES

SUBASH FURNITURE SHOP

Sree Tirumala Enterprises

S S CONSTRUCTION

Priya construction

DEEPAK AGENCIES

M/s Sriya Enterprises

BHARAT MULTITECH INDUSTRIES PVT LTD