REPAIRS TO LEAKAGE SEEPAGE OF ROOFS KITCHEN AND TOILETS ETC AT MD AND OTM ACCN AT TB II UNDER AGE BR P IN GE C KIRKEE

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n. exc. 1.5 sqm each and removing from site.

All as per item No.1 here-in-before but exc. 1.5 sqm and n.exc. 4 sqm each.

Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixindg in the frame at site as per specifiction & drawing.

S & F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, ncluding PCC 1:2:4 filled in hollow portion of frame etc, complete all as specified.

S & F 30mm thick IInd class HW glazed and skelton shutter,open rebated and prepared to receive glass, gauze, etc. (without such bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of shutters as specified in SSR-I, Section 8.24(a) supplied and fitted to chawkats.

S&F 35mm thick IInd class HW Factory made plain framed, panelled shutter (two leaf) Factory made with lock rail and panel of 9mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-Charge.

Supplying and fixing (in repairs) Factory made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with bars, dovetailed or welded all as specified.

Supplying and fixing (in repairs) Factory made steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified.

S&F in repair MS window guard bars and similar articles confirming to Fe 290 square or round match to existing all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm long.

S&F butt hinges midium weight cold rolled mild steel 125mm size.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long.

All as per item no.14 here-in-before but 150mm long.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long.

S&F aluminium alloy anodised handle, cast type 150mm long.

S&F aluminium alloy anodised handle, cast type 100mm long.

M&L for running welding for fixing hinges in repair work complete all as spcified.

M&L for Stainless steel kitchen trolley or tray rack of any size fixed in position including taking down old unserviceable Stainless steel kitchen trolley or tray rack complete all as spcified.

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beads.

M & L for 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.

M & L for 3 mm thick sheet froasted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.

M & L for 3 mm thick plain PVC sheet ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.

S & F Stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples including necessary beading all as directed by Engr-in-Charge.

S & F in repair Stainless steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks or galvanised wire staples in steel windows/ventilators or in fly proof shutter including necessary beading all as directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer etc complete all as specified.

Demolition of cement concrete (unreinforced) in any discription and in any position not other wise specifically provided for all as specified.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

M&L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded coarse aggregate in flooring surface finished even and smooth using extra cement.

Complete removal of any type old water proofing treatment including PCC if any and cleaning the top surface of slab and chajjas with wire brushues, removing dust, foreign materials, rubbish of materials from site to a distance n exc 100m complete all as specified and directed.

M&L Rendering 10 mm thick in CM1:3 on RCC roof and Chajjas including mixing with WPC @ 3% by weight of cement fininshing even and fair to receive water proofing APP membrane complete all as specified and directed by Eng-in-charge.

M&L for polythene film, 150 micron thick, laid on a coat of bituminous primer @ 0.3 to 0.5 kg per sqm all as specified.

Supply only integral water proofing compound.

M&L for water proofing treatment to roof slab and chajjas as mentioned below :- (a) On the finished and dried surface of screed applying a coat of oil bound bitumen primer @ 0.25 Kg/Sqm. (b) M&L for laying 3mm thick APP modified water proofing membrane of weight not less than 3.5 Kg/Sqm reinforced with non woven polyester having soften point not less than 150°C (wt. not less than 150 gms/sqm) applying by torch method all as specified. (c) M&L for carrying out 24 hrs ponding test over the complete treatment. (d) M&L for applying a coat of solar reflective Bituminous Aluminium paint @ 0.15 Kg/Sqm over the membrane. Note : The rate includes all necessery temporary arrangements to be made by contractor for ponding test and relevant guarantee period of Ten years. This item shall be carried out by the applicator of apporved firm and necessary guarantee certificate from applicator firm to be submitted by the Contractor after completion of the work. Make - M/s STP limited (ii) MOPLY-FP manufactured by M/S Texsa India ltd or M/S (iii)HYPERPLAS manufactured by M/s IWL Ltd

M&L for carrying out non-distructive water proofing treatment to floors, sunken portion of slab and junctions of floor and walls of bath / WC and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc with first course of injection MDI basd PU foam and second course of injection PU plain all as per manufacturers instructions etc complete and as directed. The PU foam shall have 100% solids and solvent free and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 including cleaning the surface of any description with wire brush, detecting source of leakages/seepages and removing / taking down unsound treatment / surface. Make : PIDILITE or Equivalent.

M&L for fixing the metallic packer for Hydrophobic PU foam by making hole and sealer as per manufacturers specifications for floor trap/Nahani trap in kitchen and other places. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times of its volume at liquid stage in presence of water. The PU foam plain injection shall have minimum 100 CPS viscosity and shore hardness min 50. Make : PIDILITE or Equivalent.

Dismantling of stone slab and tiles of any description or thickness in cooking platform laid bedded and pointed in any mortar all as specified and as directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding and removing rubbish off the premises.

M&L 50mm thick Cement concrete type D2, 1:4:8 (40mm graded stone aggregates) including demolition of existing PCC 50mm thick all as specified and as directed.

M & L for Glazed coloured Ceramic tiles (300x200mm) or (350x250) or (450x350) x 7 mm thick in Dado/Skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10 mm thick backing coat in CM (1:4) including demolition of existing wall tiles and removing the rubbish upto 50m distance complete all as specified and directed by Engr-in-Charge. Make - Johnson Tiles, Kajaria, Somany, Orient Bell

M & L for Non skid coloured Ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles over 15mm thick screed bed in CM (1:6) including demolition of existing floor tiles and removing the rubbish upto 50m distance all as specified and directed by Engr-in-Charge. Make - Johnson Tiles, Kajaria, Somany, Orient Bell.

M & L for Machine cut cudappa stone slab 20-25mm thick over and including 15mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling/chajjas at any height and finished fair and even and applying two coats of white wash including preparation of new plastered surfaces complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & fair complete all as specified and directed.

M&L for rendering 10mm thick onfair faces of brick work or concrete surfaces in CM 1:6 finished even & fair complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint (any tint) on walls complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint Apex (any tint) on walls complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting primer.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc., complete making good to floor all as specified. Make - M/s Hindustan Sanitary Ware, Parryware, Prayag, Neyveli Ceramics (Neycer), CERA.

S&F in repair water closet vitreous China (Orrisa pattern) size 580mm x 440mm white with complete foot rest including connection WC pan to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor all as specified. Make - M/s Hindustan Sanitary Ware, Parryware, Prayag, Neyveli Ceramics (Neycer), CERA.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets complete all as specified. Make - M/s Hindustan Sanitary Ware, Parryware, Commander, CERA, M/S Johnson Peddar.

S & F in repairs viterious china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as specified and directed by EIC. Make - M/s Hindustan Sanitary Ware, Parryware, Prayag, Neyveli Ceramics (Neycer), CERA.

S & F PVC connections 15mm dia with brass nut on both ends and washers 450mm long including taking down old PVC connections all as specified and directed by EIC.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia all as specified. Make - Jaguar, Sona, Leader, Zoloto, Sieco, Prima.

S& F in repairs bib taps CP brass fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule 15 mm dia. Make - Jaguar, Sona, Leader, Zoloto, Sieco, Prima.

S&F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore. Make - Jaguar, Sona, Leader, Zoloto, Sieco, Prima.

S & F in repair CP brass shower rose 125 mm dia all as specified.

Taking down steel tubing and connection 15mm bore from wall/ceiling/floor all as specified.

-Ditto- but 20mm bore.

Refixing of old steel tubing and connections after cleaning and descaling in new or old position with new medium grade galvanised iron fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as directed.

-Ditto- but 20mm bore.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified. Make - Tata, Jindal, Zenith, Swastik, Prakash.

-Ditto- but 20mm bore.

Dismantling PVC water tanks 500 litres capacity at any height and position all as specified.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Make - Sintex, Polycon -Jaipur, Rotex, Infra, Ashish Plast.

S&F in repair 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified.

S&F in repair ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore.

S&F in repair Cast iron floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including water leak proof treatment complete all as spcified.

S&F in repair Cast iron Nahani trap, with grating 100mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proof treatment complete all as spcified.

M&L for preparation of old undecorated surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and directed.

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old undecorated surfaces of walls by complete removal of existing treatment and applying two coats of cement based paint (any tint) on walls complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M & L for ceiling with 12mm thick perforated gypsum board pre painted /plastic coated,finish granular surfaces fixed on GI powder coated frame work of grid size0.6 X0.6 consisting of GI angles supports on wall of size 19mm X19mm X0.7mm and main tee of size 24mm X32mmX0.7mm and cross Tee of size24mmX32mmX0.79mm using purpose made members interlocking into each other other and suspended from the roof by using GI hanger wire of dia 2.68mm tof adequate length with adjustable hook clips of a 3.5mm wire to be used with main runner etc all as per manufacture instruction all as specified and directed .Make of GI grid work and celling board "Armstrong or equivalent approved make byAccepting officer" including dismantling old ceiling board of any description including cover fillets. Make - Anchor Ceiling Tiles, Arm Strong, Bison Panel, Lagyp.

S & F of 6mm th. corrugated or semicorrugated asbestos cement sheets fixed with "L" type or "J" type in roofs,walls and ridge of any description and at any height all as directed by Enh-in-charge. Incl dismantling of Asbestos cement (Corrugated , Semi corrugated etc ) sheet in roof covering all as specified.

S&F for galvalume sheets having pitch 190mm, depth 29mm and thickness not less than 0.50mm (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self staging screws of size 50/75mm and aluminium washer of suitable size in roof covering incl ridge all as specified.(Over lap shall be as specified by manufacturer) incl dismantling of Asbestos cement (Corrugated , Semi corrugated etc ) sheet or any other in roof covering all as specified.

L.K.R.TIWARI CONSTRUCTION

M/S DARSHAN ENTERPRISES

MAHESH DADAJI BACHHAV

S.R.M.K Enterprises