GE(U)/CHM-52/2023-24 COMPREHENSIVE MAINTENANCE OF PANELS, PUMPS, MOTORS, STARTERS, FOUNDATIONS AND CONNECTED UG CABLE, EARTHINGS IN DISTRIBUTION INSTALLATIONS OF WATER SUPPLY UNDER GE (U) CHANDIMANDIR

Amount

Taking down carefully centrifugal pump set 200/215 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after).

Supply only pump shaft sleeve made of gun metal suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS) suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers complete all as specified and directed.

Supply only water seal suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 200/215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump tyre coupling of suitable size, pin and bush type complete with bush nut, bolts etc suitable for 200 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: B-FLEX RB Lovejoy or equivalent.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 1.01 to 1.10 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 01.

Taking down carefully centrifugal pump set 100/ 120 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:-Supply of spare parts shall be measured and paid for separately under respective items here-in-after .

Supply only pump shaft sleeve made of gun metal suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush/latern ring suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 100 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 100 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 2.01 to 2.11 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 02.

Taking down carefully centrifugal pump set 75 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:-Supply of spare parts shall be measured and paid for separately under respective items here-in-after .

Supply only pump shaft sleeve made of gun metal suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush/latern ring suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 75HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 75 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 75 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 3.01 to 3.11 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 03.

Taking down carefully centrifugal pump set 50/60 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after .

Supply only pump shaft sleeve made of gun metal suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 50/60 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 4.01 to 4.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 04.

Taking down carefully centrifugal pump set 30 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after)

Supply only pump shaft sleeve made of gun metal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 5.01 to 5.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 05.

Taking down carefully centrifugal pump set 20 to 25 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after) .

Supply only pump shaft sleeve made of gun metal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 6.01 to 6.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 06.

Taking down carefully centrifugal pump set 10 to 15 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Make:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after) .

Supply only pump shaft sleeve made of gun metal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed. Note : All the items/parts mentioned in Srl 7.01 to 7.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No 07.

Taking down defective electric motor, squirrel cage type of any make, from base plate after unscrewing nuts, bolts of foundation/ coupling, 3 phase, 415/440 volts, 50 Hz, AC of capacity 215/200 HP shifting the same to workshop, strip opening after un-screwing nuts, bolts/ screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enameled copper winding wire of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size upto terminal connection box, varnishing, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall deemed to inculde the same (ii) Repair shall be done from any workshop within a radius of 20 Km from GE (U) Chandimandir. (iii) After assembling, rewinded motor shall be checked for no load current and full load current, testing on full load for 6 hrs.

All as per the description of serial item No 08 here-in-above but 100 HP motor .

All as per the description of serial item No 08 here-in-above but 75 HP motor

All as per the description of serial item No 08 here-in-above but 50 HP motor

All as per the description of serial item No 08 here-in-above but 30 HP motor

All as per the description of serial item No 08 here-in-above but 20 to 25 HP motor

All as per the description of serial item No 08 here-in-above but 10 to 15 HP motor.

All as per the description of serial item No 08 here-in-above but 7.5 HP motor

All as per the description of serial item No 08 here-in-above but 5 HP motor.

All as per the description of serial item No 08 here-in-above but 0.5/1 HP motor.

Supply and fixing in repair ball bearing DE/NDE suitable for AC electric motor, 3 phase, 415/440 volts of rating 200/215HP capacity complete all as specified and as directed.

All as per the description of serial item No 18 here-in-above but of rating 100/75 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 50 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 30 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 25 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 20 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 15 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 10 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 7.5 HP motor.

All as per the description of serial item No 18 here-in-above but of rating 5 HP motor.

Taking out open well type 7.5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Taking out open well type 2 to 3 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Material and labour for Strip opening of open well type submersible motor of capacity 2 to 3 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 0.5 to 1 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Material and labour for Strip opening of open well type submersible motor of capacity 0.5 to 1 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Disconnecting electric connection of VT pump set and removing the nut and bolts and keeping aside , removing the VT pump set by using chain pulley block wire rope, pipe holding flat iron clamps etc.

Disengaging/ Dismantling of discharge head by the help of special tool, removing of solenoids valve, and complete system, removing of the column pipe, line shafts, rotor and pump set by the help of chain pulley block wire rope, pipe holding flat iron clamps. Taking out damaged shaft from the column pipe including transportation of oil tubes for removing of damage bush and other parts to wksp. Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after.

S&F as in repairs SS shaft of existing size 40mm, 5 fit long including threading, grinding and cutting, complete all as specified and as directed.

Opening of VT pump set, cutting, taking out existing winding, cleaning etc carefully and rewinding with super enameled insulated copper wire with existing gauge & size and turns of coils including, heating, providing mica sheet & Ball bearing-6321 SKF etc complete all as specified and as directed.

Replacement of gun metal bush, of shaft & repair of Rotor of VT pump set complete all as specified and as directed.

Refixing the pump set with electric motor, tighten with nut & bolts, electrically connection of motor and motor starter after checking of phase sequence etc complete all as specified and as directed.

M&L for opening of twin-lobe (Raoots type blower) compressor for servicing, greasing, testing,of Lobes, Rotor, Shafts Helical timing gear etc speed 1500 RPM,14.5 HP and capacity 1000 CMH Model No-RL-110AC Installed at MDPH and Main pump house complete all as specified and as directed.

Supply only gear oil -360 for lubrication of twin-lobe (Raoots type blower) compressor complete all as specified and as directed. .

S&F as in replacement compressor bearing housing DE/NDE suitable for 14.5 HP compressor as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for Campressor as per manufacturer's design complete all as specified and as directed.

S&F as in replacement Air filter as par sample at site complete all as specified and as directed.

Dismantling of Double reduction gearbox with coupled induction motor mounted on common base frame of MS channel including Paddle assembly at Main Filter pump house and Servicing/overhaling ,Greassing of reduction gearbox and motor, reassembled the camplete gearbox with all accessories complete all as specified and directed complete all as specified and directed .

M&L for overhauling of single/double reduction Gear Box vertical/Horizental type with rotation 25:1 cogulation having integrally casted body, carbon steel worm, brass lined gear with interchangeable legs suitable for Bridge muving/Alum dozing and including necessary shaft , pooly ,nut bolts wooden fan as per existing dimentions. Gear Box should be suited for continuous run. Gear box to be fitted with electric induction motor of capacity 0.75HP to 3 HP, single phase , 230v, 50 Hz 1440 rpm etc.

S & F DOL starter for induction motor capacity of 1 HP to 3 HP Three phase ,415 V, 50 Hz as per specified and directed by Engr-in-charge.

Supply & fixing of fan belt (Size B32/B34) for reduction gear all as spicified and directed by Engr - In - Charge.

Supply of gear oil for reduction gear all as specified and directed by Engr-in-charge.

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint all as specified and directed by Engineer - in - Charge .

M & L for opening of submersible motor capacity 7.5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design, including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

M&L for servicing of hand operated crane of capacity upto 5 tonne including cleaning with wire brush, greasing of hoist, painting with approved color, replacement of hook, cleaning and greasing of rail slots, replacement of bridge drive and idler wheels, repair of pulley chain, painting of all iron parts with approved color, complete including load testing all as specified and directed

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 4 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 6 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 10 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 16 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 25 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 35 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 50 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 95 Sqmm 3 core complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in replacement spider coupling set, size L-150 of motor pump set complete made out of cast iron including drilling holes and suitable size of nuts & bolts complete all as specified and directed. Make: Flex-C/Lovejoy/HIC/Fenner

All as per item no. 56 above but of size L-190

All as per item no. 56 above but of size L-225

All as per item no. 56 above but of size L-276

All as per item no. 56 above but of size L-295

M&L for periodical Servicing of motor pumps of capacity 10 to 15 HP which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed. Note: (i) Record of servicing shall be entered in a log book and shall be signed by the Engineer-in-Charge. (ii) Each service per motor pump to be measured and paid as one unit.

All as per item No 61 here in before but for motor pumps of capacity 20 to 30 HP

All as per item No 61 here in before but for motor pumps of capacity 50 to 60 HP

All as per item No 61 here in before but for motor pumps of capacity 75 HP

All as per item No 61 here in before but for motor pumps of capacity 100 to 215 HP

Taking down carefully existing motor and pump set of capacity 10 to 20 HP from MS common base frame for replacement of deteriorated base frame and repair of PCC foundation including re-mounting of motor pump set to match with alignment of existing pipe line complete all as specified and directed by Engineer-in-Charge. Note : PCC foundation & MS common base frame shall be measured & paid seperately under respective item of BOQ.

All as per item No 66 here in before but for motor pumps of capacity 30 HP

All as per item No 66 here in before but for motor pumps of capacity 50 to 75 HP

All as per item No 66 here in before but for motor pumps of capacity 100 to 120 HP

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .

M&L Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate for foundations, fillings and mass concrete all as specified and directed by Engineer – in - Charge.

S & F in replacement rolled mild steel channel, angle or tee sections, fixed independently, without connection plate, etc Fe-290 (Gde E-165) including nuts, bolts and washers for base frame of motor pump set, drilling of holes of suitable size for bolts & painting with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Supply & fix in repair direct online starter suitable for 5 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fix in repair star delta starter suitable for 7.5 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fix in repair star delta starter suitable for 10 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Lath work for making of threads on a cylindrical (internal / external) surface and turning of conical surfaces or tapers and making of any tools as directed by Engineer-in- charge.

M & L motor capacitor of capacity 20 micro farad complete all as specified and directed.

M & L motor capacitor of capacity 25 micro farad complete all as specified and directed.

M & L motor capacitor of capacity 36 micro farad complete all as specified and directed.

M & L motor capacitor of capacity 45 micro farad complete all as specified and directed.

S&F Electrical insulating mat as per IS 15652:2006, with anti skid design, 1.1 KV grade, 3mm thick, 1 mtr wide, type-C, complete all as specified and as directed.

Supply and fixing in replacement Fountain light waterproof IP-68 ,RGB colour, Stainless Steel body, 10 W including fitting complete all as specified and directed

Supply and fixing in replacement Fountain light waterproof IP-68 , RGB colour ,Aluminium body 10 W including fitting complete all as specified and directed.

Supply and fixing in replacement Decoder light controller US plus for 3CH X 2A 660 W for AC 100-240 V LED lighting all as specified and directed. Make: DMX or equivalent as approved by GE.

Supply and fixing in replacement Stainless steel water flow universal straight jetting fountain nozzle of size 15mm dia complete all as specified and directed

Supply and fixing in replacement Stainless steel water flow universal straight jetting fountain nozzle of size 10 mm dia complete all as specified and directed

Supply and fixing in replacement 1.5 Sqmm 4 core PVC sheathed copper conductor cable incl accessories complete all as specified and directed

Supply and fixing in replacement Gun metal gate valve 15 mm dia complete all as specified and directed.

Supply and fixing in replacement Fountain Jet nozzle suitable for 25 mm dia pipe complete all as specified and directed.

Supply and fixing of copper thimble for 10 to 35 Sqmm cable

Supply and fixing of copper thimble for 50 to 95 Sqmm cable

S & F in replacement DI sluice valve, SS spindle 100 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

S & F in replacement DI sluice valve, SS spindle 150 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

S & F in replacement DI sluice valve, SS spindle 200 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

Demolition of brick work built in cement mortar including all quoins, arches, piller etc complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan to exceeding 6m mean radius, built in 1:4 cement mortar complete all as specified and directed

M & L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L MS black sheet 3mm thickness used as trench / valve pit cover incl painting work with two coats of black bitumouns paint over a coat of red oxide primer complete all as directed.

Shifting of existing panel board including loading unloading, demolition of existing foundation and making good complete all as directed

S&F in replacement Pop Up Sprinklers as in replacement 50 mm dia working pressure 1 to 3 bar complete.

S&F in replacement Rain Bird Swing Joint in replacement 50mm operating pressure 80 PSI complete.

S&F in replacement Air release Valve in replacement 50 mm dia complete.

S&F in replacement Pressure gauge as per sample

S&F in replacement PVC Branch pipe 15 mm dia flexible

S&F in replacement stainless steel with brass connector round dia of pipe 54 mm dia and 15 mm threads fountain welded in per meter for fixing of nozzle including welded work for any connecting work requirement complete all as specified and directed.

Supply and fixing in replacement of brass nozzle adjustable type of 15 mm dia, interior thread complete all as directed.

Supply and fixing in replacement MS suction stainer of size 80 mm bore complete all as specified.

Supply and fixing in replacement MS suction stainer of size 100 mm bore complete all as specified.

Supply only tyre coupling complete set of suitable size (TC-13/14/15/16 or any other as per site requirement) suitable for 20/25/30/50 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Unique/ Unimac

M&L for painting with super synthetic enamel paint after scrapping out and prepration of surface of open CI/GI/DI pipeline up to 300 mm dia appx 100 RM, sluice valves appx 10, and metalic parts fire point, In/out get, , main gate and supporting including writting existing matter arrow marking the pipe line etc at Chandimandir Mil stn pump House etc complete all as specified and directed by EIC .

M & L for cleaning , scraping out old rubbed paint / rust & appling one coat of rubber synthetic paint over a coat of primer on 100 HP to 120 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & appling one coat of rubber synthetic paint over a coat of primer on 50 HP to 75 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & appling one coat of rubber synthetic paint over a coat of primer on 20 HP to 40 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & appling one coat of rubber synthetic paint over a coat of primer on 01 HP to15 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

S&F in replacement MCCB 4 pole with neutral link 160-200 Amp 25 KA including the cost ofsuitable wooden board,lugs and grouting etc .

S&F in replacement MCCB 4 pole with neutral link 250-320 Amp 50KA including the cost of suitable wooden board,lugs and grouting etc .

S&F in replacement MCCB 4 pole with neutral link 125-160 Amp 36 KA including the cost of suitable wooden board,lugs and grouting etc

Supply and fixing as in repairs HRC fuse 100 Amp for Soft Starter

Supply and fixing as in repairs HRC fuse 160 Amp for Soft Starter

Supply and fixing as in repairs HRC fuse 250 Amp for Soft Starter

Supply only glass type fuse 5 Amp, 125V for Soft Starter

Supply and fix in replacement indicator lamp, LED type of colour red/ green complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement phase indicator lamp, LED type of colour red, bule and yellow (Set of three) complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement indicator lamp, LED type of colour red/ green complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement soft starter 3 phase, 50 Hz, 415 V, Icl current rating 480A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 175 kW motor, complete all as specified and directed.

Supply and fixing in replacement soft starter 3 phase, 50 Hz, 415 V, Icl current rating 110 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 55 kW motor, complete all as specified and directed.

Supply and fixing in replacement soft starter 3 phase, 50 Hz, 415 V, Icl current rating 170 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 90 kW motor, complete all as specified and directed.

Supply and fixing in replacement soft starter 3 phase, 50 Hz, 415 V, Icl current rating 140 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 75 kW motor, complete all as specified and directed.

Taking down carefully Vehicle washing Pump set 5 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after.

Supply only Bearing of Pump

Supply only Bush of Pump

Supply only Kem shaft of Pump

Supply only Lock of Pump

Supply only Packing Kit of Pump

Supply only Yena bond

Supply only Ball set of Pump

Supply only Ring

Supply only Boki of Pump

Supply only Valve chamber/Head of Pump

Supply only Cylinder of Pump

Supply only Nozzle 300 PSI of Pump

Supply only Hose pipe of 200 PSI

Supply only Belt of Pump

Supply only Pipe connector iron clamp and nut bolt

Supply only Lubricant oil

S&F as in repairs Maxbay Highbay light 100W , CCT-6500K Voltage -240V Mains Current (A)-0.450A, Lumens (Lm)-10360 with No harmful UV IR radiations ,Environment Firedly & energy saving up to 50% over conventional light soucre ,Robust desing for better heat dissipation , Operating temp :- 10 degree cel , Operating voltage range :- 140-270VAC, IP 65 Protection , IK 07 Protection LED Driver THD<10% dully fixed on wall /pole with and incl 10 mm dia 150 mm long anchor bolts

S&F as in repairs Maxbay Highbay light 120W , CCT-6500K Voltage -240V Mains Current (A)-0.540A, Lumens (Lm)-12200 with No harmful UV IR radiations ,Environment Firedly & energy saving up to 50% over conventional light soucre ,Robust desing for better heat dissipation , Operating temp :- 10 degree cel , Operating voltage range :- 140-270VAC, IP 65 Protection , IK 07 Protection LED Driver THD<10% dully fixed on wall /pole with and incl 10 mm dia 150 mm long anchor bolts

Note:- (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall deemed to inculde the same. (ii) Repair shall be done from any workshop within a radius of 20 Km from GE (U) Chandimandir. (iii) After assembling, rewinded motor shall be checked for no load current and full load current.

Alpha Engineers and Builders (BID ID -3011364)

NARINDER KUMAR SONS (BID ID -3008027)

Bharat Enterprises (BID ID -3016303)

KHAJURIA ENGINEERS (BID ID -3011442)