PERIODICAL SERVICES TO CERTAIN MD ACCN AND REPAIR TO ROOFING WALL/FLOOR TILES, SANITARY FITTING, JOINERY, FALSE CEILING ETC TO OTM ACCN OF GE(SOUTH) MEERUT CANTT UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises Complete all as specified and directed.

M&L light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 Sqm in skirting/dado set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L 15mm thick Screed bed in cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:4 as bedding layer on skirting/dado to receive wall tiles complete all as specified and directed.

S&F in repair hollow PVC wall lining consisting of 5mm thick plain/printed colour (as approved by GE) PVC sheet inclusive of solvent cement and fixing on PVC frame including corner (sides, top, bottom and corner) as per specification and drawing. Comnplete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Including fixing with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F 6mm thick Asbestos cement onepiece plain angular ridge 6mm thick fixed with L -type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Dismantling wrought iron or mild steel work of any description not otherwise provided for. Complete all as specified & directed

S&F Fe 290 (Gde E-165) Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified & directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Supplied and fixed GI steel water tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including cutting screwing and waste etc and cutting through walls floors etc complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Supplied and fixed GI steel water tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including cutting screwing and waste etc and cutting through walls floors etc complete all as specified and directed.

S&F in repair one piece closet S trap size (690x375x785)mm with integrated cistern, seat cover and twin flush fittings. Complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm bore complete all as specified and directed.

S&F in repair fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.

S&F in repair fancy type CP angle cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

S&F in repair CP towel ring 155mm dia. Complete all as specified and as directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F in repair Cast iron Nahani trap 100mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 liter capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F factory made single extruded WPC (wood polymer composite) solid door frames of chokhat of size 65x125mm comprising of virgin PVC Poymer of K VALUE 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC aolvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm², moduiles of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F factory made 30mm thick pre-laminated WPC (wood polymer composite) moulded shutter with different design and both side plain required size comprising of virgin WPC resin of K value 58-60(suspended grade) calcium carbonate and natural fibres (wood/powders/rice husk/wheat husk) and nontoxic additives made from extrusion process WPC foam sheet single extruded (inner) with density not less 600 kg/cbm, having good screw holding capacity (screw withdrawal strengthof 2000N (face) & 100N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity 850 N/mm² and resistance of spread of flame of class A category with property of being termite/borer free. Water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. Including tower bolt, handle etc. The design and fittings approved by Engr-in-charge. Complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down Shutters & removing to or from store of any description exc 1 sq. m and n exc 2 sq. m each and removing to store complete all as specified and directed.

S&F pressed steel frames ( 105x60)mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc Complete all as specified and directed.

M&L Precast cement concrete type C1 1:3:6 (using 20 mm well graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling, prssed steel frames etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.”

S&F 40mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F in repair overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 100mm butt hinges stainless steel complete all as specified and directed.

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick Work or concrete curface and finished fair & even in CM 1:6 complete all as specified and as directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces mixed with liquid WPC @ 200 ml per 50 Kg of weight of cement consumed or as per manufacterers instrutions finished even and fair without using extra cement complete all as specified and directed. Note:- Water proofing compound consumed under this item will be measured & paid separetaly under "Supply only" item of Sch 'A'.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling complete all as specified and as directed.

M & L for rendering 20mm mm thick in cement mortar (1:4) on concrete surfaces such as chajjas/roof projection/facia finished the surfaces even and smooth mixed with liquid WPC @ 200 ml per 50 Kg of weight of cement consumed or as per manufacterers instrutions finished even and fair without using extra cement complete all as specified and directed. Note:- Water proofing compound consumed under this item will be measured & paid separetaly under "Supply only" item of Sch 'A'.

M&L for new plastered surface of wall by applying 1mm thick wall care putty and then two coat of exterior grade weather proof acrylic emulsion paint over a coat of primer. Complete all as specified & directed.

M&L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall by applying 1mm thick wall care putty and then two coats of oil bound distemper complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying one coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of old plastered surfaces on wall including petty repair with wall care putty where ever required to obtainig acheive even and smooth surface and applying two coat of oil bound distemper complete all as specified and directed.

Supply and fixing in repair vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusiveof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

S&F in repapir vitreous china urinal partion incl all necessry fxing arrangement complete all as specified and directed.

S&F Powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F in repair powder coated aluminium Anodised door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F in repair 5.5MM thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F aluminium 4 levers Mortice lock, vertical type, size 100 mm. Complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n. exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from wooden frame or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed.

M&L Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A complete all as specified and directed.

Taking down PVC/CI pipes any type and size incl all fittings complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC in repair (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed.

S&F in repair Stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

M&L for complete removal of exisitng treatment on external wall surfaces and applying 1mm thick wall care putty and two coats of exterior grade weather proof acrylic emulsion paint over and including 1mm thick wall care putty. Complete all as specified and manufactures instruction and directed by Engr-in-charge.

M&L for preparation of old painted surfaces of wood of any decription over 10cm in width or girth and applying one coat of synthetic enamel paint.Complete all as specified and directed.

M&L for preparaton of old painted surfaces of steel of any decription over 10cm in width or girth and applying one coat of synthetic enamel paint.Complete all as specified and directed.

M&L for injection chemical GLYPHOSPHATE (4% concentration) of 20ml or till refusal by making cut/injection in the steam of plant or roots at 30mm and spraying with solution 25ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the platn/vegetation of any girth including penetrated roots and making good with PCC 1:2:4 and plaster for any height of the building. Complete all as specified and directed.

ATHARV CONSTRUCTION

M/S ABHI ASSOCIATES

Jay Ambay Enterprises

SA construction co.

M/S AMAR ELEKTRO CENTRE

R.D.Builders

Shikha Enterprises

AEGIS INTERNATIONAL

Tayal Builders