DAY TO DAY MAINT ARMAAN AND ADDRESSAL COMPLAINT INCLUDING CERTAIN REPAIR TO FLOOR, CHAJJA, ROOF TREATMENT AND OTHER MISCELLANEOUS ITEMS FOR JCOs/OR MD ACCN AT FORT CANTT ALLAHABAD

Amount

Cleaning and removing all scale and dirt, etc from PVC/RCC tanks and mouths of circulating pipe of exceeding 250 litre but not exceeding 500 liter capacity comprising in following stages :- (a) First Stage : Mechanised dewatering by mechnical appratus from tank. (b) Second Stage : Sludge & silt deposits to be removed including scrubbing the surface of the base and wall of tank by suitable brush and with special sludge removal pump. (c) Third Stage : Cleaning of the surface of tank with high pressure rotatory water jet with the help of mechanical equipment. (d) Fourth Stage : Vacuum cleaning, removal of remaning sludge from the floor with the help of industrial vacuum cleaner. (e) Fifth Stage : Anti bacterial spray - spraying non toxic biodegradable eco-friendly anti bacterial agent. (f) Sixth Stage : UV radiation treatment of inside of tank by exposing UV radation to kill further suspended or floating bacteria.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 Sqm each with shutter (without taking off shutters from the frames), complete all as specified and directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as speified and directed .

Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as speified and directed .

Asbestos cement corrugated or semi-corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Asbestos cement corrugated or semi-corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed. [Expect sheet]

Dismantling framed hardwood/ soft wood timber scantlings 40 sq. cm and over in section, including removing bolt, nut etc in any position, complete all as specified and directed.

Second class hard wood timber scantling clean swan fixed as girder, lintels, wall plates, joist, purlin rafters, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Galvanised, corrugated mild steel sheeting, 0.63mm thick, with two corrugations side lap, fixed with ‘L’ type or ‘J’ type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

Galvanised, plain mild steel sheeting, 0.63mm thick, in ridges, hips, valley gutters, drip and straight flshings (length and girth as fixed), with grade of zinc coating 275, complete all as specified and directed.

Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid and bedded pointed in cement mortar, complete all as specified and directed.

Demolition of Mud / Lime concrete from roof surface not exceeding 200 mm thick including plastering, leaping, vegetation shrubs not exceeding 15 cm thickness (below or above ground level) and removing rubbish from site complete all as specified and directed.

Providing water proofing treatment over cleaned roof surface with APP modified bitumenous membrane weight not less than 3 kg per sq.m comprising of the following and testing of following: (a) 10 mm thick rendering or screed bed or bedding layer in cement sand mortar 1:3 mixed with water proofing compound @ 3% by weight of cement, finished surface even and smooth without using extra cement. (b) One coat of Bitumen primer confirming to IS-3384-1965 @ 0.3 ltr per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (d) Providing APP modified polymeric water proofing membrane having weight not less than 3 kg per sq.m with 100 mm wide side or end lap and joint sealed with flamed torched pasted over full length. (e) Again Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (f) Spread coarse sand @0.5 kg/sqm over entire bitumen surafce. Note: Water proofing compound to be measured and paid separately.

Plain cement concrete 1:2:4 type B-0 (12.50mm graded stone aggregate), as in roof padding, levelling course, benching etc., and finished the surface even and fair, complete all as specified and directed.

Bricks, sub class "A", laid flat on roofs, old size bricks bedded and jointed in CM 1:6 and pointed flush in CM 1:3, bricks bedded on 25mm thick sand layer, complete all as specified and directed.

Bricks, sub class "A", laid flat on roofs, old size bricks bedded and jointed in CM 1:6 and pointed flush in CM 1:3, bricks bedded on 25mm thick sand layer, complete all as specified and directed. [Except bricks]

Plain Cement concrete 1:2:4, type B-0 (12.5 mm crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges using water proofing compound, complete all as specified and directed. NOTE:- Water proofing compound shall be paid separately under respective item of this Schedule.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Vitrified homogenous tiles (light shade) 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm each (minimum size of tile 600mm x 600mm), in vertical surfaces such as skirting, dados, riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10mm thick bedding in CM 1:4, complete all as specified and directed.

Vitrified homogenous tiles (light shade) 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm each (minimum size of tile 600mm x 600mm), in floors. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Non - skid Ceramic, jointless coloured tiles 7 to 8 mm thick, size of each tile shall be 300mm x 300mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Non - skid Ceramic, jointless coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 350mm x 250mm x 7mm / 450 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Non skid jointfree ceramic coloured tiles 400mm x400mm x 7 to 8 mm thick, in skirting, dados, risers to steps, etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4), complete.all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.

Rendering 10mm thick in CM 1:6 on brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed.

Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick in cement mortar in two layers consisting of first layer 10mm thick in cement mortar 1:6 and top layer 5mm thick in cement mortar 1:4 mixed with approved water proofing compound as per manufacturer's instructions on other than fair faces on brick work or concrete surface on external surface of brick work complete all as specified & directed. Note : Water proofing compound shall be measured and paid seperately.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of acrylic emulsion paint, complete all as specifed and directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of cement primer, complete all as specifed and directed.

Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash including washing of floor, cleaning of glass , joinery,electrical fittings,wires etc. of drops & splash, complete all as specifed and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame (with and including punching or drilling out old glazing pins/spring clips and providing and fixing new ones) or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Figured glass, 4mm thick, pin headed type and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 75 mm size long, fixed in repair, complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100 mm size long, fixed in repair, complete all as specified and directed.

Block board 18/19 mm thick, interior grade, commercial type, fixed with screws to timber frame work, fixed in repair, complete all as specified and directed.

Prelaminated particle board, 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed in repair, complete all as specified and directed.

First class hardwood wooden Beads, 19mm width, straight (any size) for glazed or gauzed joinery, partical boards, renewed, including mitres etc. and removing old beads to store, complete all as specified and directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm (when open), fixed in repair, complete all as specified and directed.

PVC tank cover any type for water tank of capacity 500 litres/1000 ltr, in repair, complete all as specified and directed.

Rotational moulded polyethene water storage tanks, 500 ltr capacity, "ISI marked"double layered (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc, in repair. complete all as specified and as directed.

Rotational moulded polyethene water storage tanks, 1000 ltr capacity, "ISI marked"double layered (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc, in repair. complete all as specified and as directed.

Vitreous China wash hand basin, white flat back of size 580 mm x 400mm fixed on and fixing of cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) including fixing of tap, waste fitting etc complete all as specified and directed. Note :- Pillar tap shall be measured & paid seperately as supply only under respective item.

Supply only 15mm dia chromium plated pillar tap, fancy type with fly nut capstan head screwed for 15mm dia pipe, complete all as specified and directed.

Toilet paper holder, box type of brass, chromium plated, fixed to wall with chromium plated brass screws, in repair, complete all as specified and directed.

Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35mm x 35mm x 5mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, in repair, complete all as specified and directed.

Aluminium (diecast) body hydraulically door closer regulated, designation No.3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg, in repair, complete all as specified and directed.

Hasp and staple 100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws, in repair, complete all as specified and directed.

Stainless steel plate rack (utensil rack) of size (600mmx750mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet fixed with brass screw including necessary fittings, nut/bolts , washer etc., fixed in repair, complete all as specified and directed. Note: Sample of stainless steel plate rack shall be as approved by Accepting Officer.

Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed in repair, complete all as specified and directed.

Fixing in repair only existing tubular towel rail /ring any types complete all as specified and directed.

Mild steel handle (left or right) for steel window of existing size including necessary welding / riveting etc., fixed in repair, complete all as specified and directed.

Peg stay including welding to base plate , pin and handle / brackets etc, fixed in repair, complete all as specified and directed.

Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 300mm size, fixed in repair, complete all as specified and directed.

Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, fixed in repair, complete all as specified & directed.

Extruded aluminium alloy handle fabricated type, anodized 125mm long, in repair, complete all as specified and directed.

Extruded aluminum, anodized, barrel tower bolts 10mm dia extruded section 150 mm size ISI marked, in repair, complete all as specified and directed.

Extruded aluminum, anodized, barrel tower bolts 10mm dia extruded section 100 mm size ISI marked, in repair, complete all as specified and directed.

Harrison rail mild steel chromium plated bracket holder for curtain rod, 20mm dia fixed with screws to pelmet boxes, in repair, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300mm long, fixed in repair, complete all as specified and directed.

Mild steel sliding door bolts, Length of bolt in 300 mm, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, fixed in repair, complete all as specified and directed.

Stainless steel waste coupling for stainless steel sink 75 to 100 mm dia set with rubber washer etc, in repair, complete all as specified and directed.

Resecuring or erasing & adjusting of door/ windows/ cup boards shutters of any number of panels for easy closing/ opening tightening or hinges of changing the position of hinges adjustment of tower bolts, sliding bolts, handle/ knob hasps/ stapple etc size exceeding 1 Sqm but not exceeding 2 Sqm complete all as specified and directed.

Fixing only loose existing pelmet boxes made of 19mm thick block board by embedding wooden gutties in cement mortar 1:3 with mild steel clips and screwes etc (length of pelment box not exceeding 1.5 m), complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring , fixed in floor with over all ( length of cover plate 140 mm), in repair, complete all as specified and directed.

Flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, in repair, complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

Galvanised Steel water tubes 15 mm bore, medium grade, (ISI marked), galvanised with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Galvanised Steel water tubes 20 mm bore, medium grade,( ISI marked), galvanised with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Galvanised Steel water tubes 15 mm bore, medium grade, (ISI marked), galvanised with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [Except tubing]

Galvanised Steel water tubes 20 mm bore, medium grade,( ISI marked), galvanised with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. [Except tubing]

PVC waste pipe 32 mm dia & 60cm long with cup & washer for wash hand basin, fixed in repair, complete all as specified and directed.

PVC Waste pipe 40mm dia & 60cm long for stainless steel sink with cup, fixed in repair, complete all as specified and directed.

Centre hole basin mixer, 15mm dia, with casted spout chromium plated brass with swinging including plugging and securing to walls, fixed in repair, complete all as specified and directed.

Wall mixer with telephonic type shower arrangement chromium plated, fancy type, 15 mm bore, fixed in repair, complete all as specified and directed.

Chromium plated brass shower rose, 100mm dia, with swivel joints fixing to steel pipe or union of 15 mm dia pipe, fixed in repair, complete all as specified and directed.

PVC shower rose any colour for fixing with 15mm pipe. (Minimum weight 40gms) with swivel joints fixing to steel pipe or union of 15 mm dia pipe, fixed in repair, complete all as specified and directed.

Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repair, complete all as specified and directed.

Angle valves two-in-one, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15 mm bore, in repair, complete all as specified and directed.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions, 15mm bore, fixed in repair, complete all as specified and directed.

Bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, 15mm bore, fixed in repair, complete all as specified and directed.

Bib taps long body chromium plated, 15 mm bore cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends suitable for 15 mm bore GI pipe, ISI marked, fixed in repair, complete all as specified and directed.

Bib taps short body chromium plated, 15 mm bore cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends suitable for 15 mm bore GI pipe, ISI marked, fixed in repair, complete all as specified and directed.

Repair to leakage water in pillar tap, stop cock, angle valve, bib taps of any size or any discription by replacing the washer etc & rifixing in same position complete all as specified and directed.

Brass chromium plated pillar tap, fancy type with fly nut capstan head screwed, 15mm bore, fixed in repair, complete all as specified and directed.

Pillar taps 15mm bore, of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms), fixed in repair, complete all as specified and directed.

Ball valve 15mm dia, of PVC with complete accessories for PVC low level flushing cistern, in repair, complete all as specified and directed.

PVC connection 15mm dia and 45 cm long with 2 Nos brass nuts with washers, fixed in repair, complete all as specified and directed.

PVC connection 15mm dia and 60 cm long with 2 Nos brass nuts with washers, fixed in repair, complete all as specified and directed.

Small fittings of galvanized iron medium grade such as socket, reducer, socket, elbow, nipple, tee, long screw, union etc for 15mm bore pipe, in repair, complete all as specified and directed.

Small fittings galvanized iron medium grade such as socket reducer, socket, elbow, nipple, tee, long screw , union etc for 20 mm bore pipe, in repair, complete all as specified and directed.

Repair /adjustment to washer/ siphon etc for high level or low level flushing cistern including replacement of washer, check nuts, plug etc any type of flushing cistern and making functional complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms), 20mm dia, fixed in repair, complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455gms), 25mm dia, fixed in repair, complete all as specified and directed.

Internal fittings such as syphon, ball valve for PVC low level flushing cistern, complete all as specified and directed.

Internal fittings such as syphon, ball valve for viterous china one piece pedestal pattern WC, complete all as specified and directed.

Spindles for 15mm brass or CP brass pillar tap, bib tap, stop cock etc, fixed in repair, complete all as specified and directed.

Greasing of existing steel window & door (of any type/size) and making suitable for easy opening/closing of shutters including cutting of jambs/ cills etc and making good the disturbed surfaces, complete all as specified and directed.

Welding in repairs n.exc 2.5cm in length, thickness of Metal to be welded exc. 6mm but n.exc 9mm, complete all as specified and directed.

Mortice lock for fixing in aluminiun door as per site requirement, fixed in repair, complete all as specified and as directed.

Double action floor door spring, complete all as specified and directed. Make : Godrej Cat No 4102 or equivalent as approved by the GE.

Plastic seat & cover for pedestal pan, black/ white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

PVC handle for low level flushing cistern, fixed in repair, complete all as specified and directed.

Stainless steel grating or jalli for nahani trap etc, 100mm dia, fixed in repair, complete all as specified and directed.

Stainless steel grating or jalli with central hole for nahani trap etc, 100mm dia, fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe 15mm bore, fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves,with iron wheel head, screwed both ends for iron pipe 20mm bore, fixed in repair, complete all as specified and directed.

Brass chromium plated Over head shower 150mm x 150mm square with swivel joints, in repair, complete all as specified and directed. Make: Jaquar Model Code- OHS-35495 or equivalent as approved by GE.

Rubber door seal 32mm wide with aluminium strip of size 19mm wide fixed with machine made steel screw with washer, fixed in repair, complete all as specified and directed.

Removing air lock from GI Pipe of any size by opening of joints / fittings and refixing the same after the job is done, complete all as specified and directed.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable nails/ screws, complete all as specified and directed.

Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable nails/ screws, complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, fixed in repair, complete all as specified and directed.

Mild steel angle cantilever bracket made to shape of size 35mm x 35mm x 5 mm for kitchen sink/ WHB including taking down existing bracket from wall and refixed with new bracket embedded in PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) including two coat of synthetic enamel paint over a coat of red oxide primer on exposed surface & anti-corrosive paint on embedded portion, complete all as specified and directed.

Peg (set of six) aluminium alloy 350 mm long, in repair, complete all as specified and directed.

Long screw fittings galvanized iron 'medium grade' for 15 mm bore pipe, fixed in repair, complete all as specified and directed.

Long screw fittings galvanized iron 'medium grade' for 20 mm bore pipe, fixed in repair, complete all as specified and directed.

Hand shower chromium plated (health faucet) with 8 mm dia and 1.5 m long flexible tube with wall hook with NRV (back flow prevention), fixed in repair, complete all as specified and directed.

Chromium plated stainless steel soap dish fancy type, fixed in repair, complete all as specified and directed.

Chromium plated towel ring including brass screw, in repair, complete all as specified and directed.

Chromium plated towel rack with lower hanger, brass railing, hook including brass screw, fixed in repair, complete all as specified and directed.

Cement concrete, 75mm thick, type B-2, 1:2:4 (40mm graded aggregate) as in patch repair aera n exc 3.00 Sqm finished surface even and smooth or as per existing/ surrounding floor, complete all as specified and directed.

Rendering 10mm thick, as in patches area n exc 3 Sqm on wall/ceiling surface finished as in existing/surroinding plaster in CM 1:4 complete all as specified and directed.

Renewing glazed tiles/ceramic tiles (floor/wall tiles) in patches, area not exceeding 5 sq.m. including removing and cleaning old tiles, preparing screed beds 15 mm thick 1:6 and laying or setting, jointing and pointing new or old tiles, complete all as specified and directed.

Chromium plated corner glass shelf with bracket and 6.3 mm sheet glass including circular cutting, grinding polishing & rounding edges of glass etc., fixed in repair, complete all as specified and directed.

Brass chromium plated bottle trap for wash basins with inlet and outlet, screwed for pipe or connections including necessary packing, union and cap, 32mm/ 40 mm bore, in repair, complete all as specified and directed.

Bathroom cabinet of hard thermosetting plastic of size 625mm x 625 mm, fitted with superior quality distortion free 4 mm thick mirror, in repair, complete all as specified and directed. Make : Jindal Model No 708 (Morris) or equivalent in Commander and Gratolite.

Taking down Aluminium door/window from frame n.exc 2 sqm for necssary repair work and ruber beads, springs, floor finish propoerly, re-fixing in same opening after adjusting of the same including accessories as required to make good of defect portion complete all as specified and directed..

PVC coating mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings decorative holder and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair, complete all as specified and directed.

Vitreous china bowl urinal half stall type white complete including providing and fixing plugs embedding urinal against wall in cement mortar 1:2 securing urinal to plug with including 60 cm long brass screws and pointing around urinal back in cement fixing automatic flushing cistern with bracket, flush pipe, grating and union for discharge pipe (excluding of fixing supply pipe to flushing cistern, trap and waste pipe), in repair, complete all as specified and directed.

Fibre glass reinforced translucent corrugated sheeting, 2mm thick, with two corrugation side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from PVC/ RCC tanks and mouths of circulating pipe of exceeding 500 litre but not exceeding 1000 litre capacity comprising in following stages :- (a) First Stage : Mechanised dewatering by mechanical apparatus from tank. (b) Second Stage : Sludge & silt deposits to be removed including scrubbing the surface of the base and wall of tank by suitable brush and with special sludge removal pump. (c) Third Stage : Cleaning of the surface of tank with high pressure rotatory water jet with the help of mechanical equipment. (d) Fourth Stage : Vacuum cleaning, removal of remaning sludge from the floor with the help of industrial vacuum cleaner. (e) Fifth Stage : Anti bacterial spray- spraying non toxic biodegradable eco-friendly anti bacterial agent. (f) Sixth Stage : UV radiation treatment of inside of tank by exposing UV radiation to kill further suspended or floating bacteria.

Fixing only in repair Cast iron 100mm dia Branch piece/ bends any type fitted to existing alignment of same dia pipe fixed to wall of any height including necessary screw for repair or rubber gasket or suitable solution, complete all as specified and directed.

Cast iron bends, 100mm bore, with access door (any radius), diminishing pieces or tapers (larger bore measured), fixed in repair, complete all as specified and directed.

Cast iron 100mm dia Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door, fixed in repair, complete all as specified and directed.

Fixing only in repair Cast iron 75mm dia Branch piece/ bends any type fitted to existing alignment of same dia pipe fixed to wall of any height including necessary screw for repair or rubber gasket or suitable solution, complete all as specified and directed.

Cast iron bends, 75mm bore, with access door (any radius), diminishing pieces or tapers (larger bore measured), fixed in repair, complete all as specified and directed.

Cast iron 75mm dia Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door, fixed in repair, complete all as specified and directed.

Fixing only in repair 110mm dia PVC (SWR) Branch piece/bends any type fitted to existing alignment of same dia pipe fixed to wall of any height including necessary screw for repair or rubber gasket or suitable solution, complete all as specified and directed.

PVC (SWR) bend, 110mm dia, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door, fixed in repair, complete all as specified and directed.

PVC (SWR), 110mm dia, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door, fixed in repair, complete all as specified and directed.

Fixing only in repair 75mm dia PVC (SWR) Branch piece/bends any type fitted to existing alignment of same dia pipe fixed to wall of any height including necessary screw for repair or rubber gasket or suitable solution, complete all as specified and directed.

PVC (SWR) bend, 75mm dia, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door, fixed in repair, complete all as specified and directed.

PVC (SWR), 75mm dia, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door, fixed in repair, complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.

Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore / M/s Kumar Arch Tech Ltd.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

Aluminium alloy handles, cast type, anodised, 125mm long, complete all as specified and directed.

Magnetic catcher, fixed in repair, complete all as specifed and directed.

Brass drawer pulls, 4 screw plate with fixed dished pull; 80 mm to 100mm long, in repair, complete all as specified and directed.

Urinal pipe with coupling for fixing in urinal pot, 32mm dia, in repair, complete all as specified and directed.

Pressed steel frames of size 165mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. Note:- The quoted unit rate under this item shall deemed to be included one shop coat of primer.

Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. Note:- The quoted unit rate under this item shall deemed to be included one shop coat of primer.

Flush shutters 35 mm thick, factory made, kiln seasoned and ASCU treated solid core construction, with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

Second class hardwood glazed and skeleton door shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars),divided into square with plain chamfered or rounded, metered edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc. are provided with stiles and rails as specified in SSR Part-I, section 8 clause 8.24 (a), complete all as specifed and directed.

Steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars dovetailed or welded including two coat of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, fixed in repair, complete all as specified and directed. Note:- Red oxide primer have been cattered by factory.

Steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars dovetailed or welded including two coat of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, fixed in repair, complete all as specified and directed. Note:- Red oxide primer have been cattered by factory.

Steel ventilators, fixed type, with glazing bars guaged bar, fixed in repair, complete all as specified and directed.

Plain solid straight chowhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint of 2nd class hard wood (sal), complete all as specified and directed.

Framed work as in grills, grating etc with ends of bars shouldered and riveted, or forged in to spike frame guard bars, iron door hold fast etc confirming to Fe-410-0 or 310-0, complete all as specified and directed.

E-board Make: Everest, Design "Lake and Hill" of size 605 x 605 x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x 300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 2mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturers instructions, fixed in repair, complete all as specified and directed. Make of frame work: Armstrong or equivalent.

Dismantling of AC sheet corrugated or semi corrugated including ridges as in roof or wall etc covering complete all as specified and directed.

Supply only Integral Water proofing Compound ISI marked.

K L KALSI

M/S Akhilesh Enterprises

Airways Enterprises

shweta constructions

ms shanti sons

M/S ATUL CONSTRUCTION

creative construction co.