Procurement of spares for MOH of Detroit S60 Engine ESN 06R0970832 and 06R1058557

PLUG PIPE 1/4-18 HEX HD STL CTD RED

OVERHAUL KIT GASKET

HEX SCREW (23506222)

3/8"PIPE PLUG

PIPE PLUG

CAM BRG SET

BOLT PHOS HVY HEX FLG

DRIVE ASSY., 2 GROOVE UNITIZED TEFLON

INTAKE VALVE (P)

GASKET

BOLT 12 PT

SENSOR, OIL/FUEL PRESSURE

SENSOR,TEMP

SENSOR ASSEMBLY

SEALING RING

BOLT PHOS HVY HEX FLG

BOLT PHOS HVY HEX FLG

ELBOW, 1/2"-90 DEG. FL. TUBE; 3/8" PIPE*

PRIMARY FUEL FILTER

BOLT, M10 X 1.5 X 30.0 MM

FILTER, FUEL SECONDARY

VALVE ASM

BOLT PHOS HEX FLG LRG 6174M

PLUG 1/2 PIPE

GASKET

CLAMP, 4.44" DIA

PLUG PIPE 1/4 SQ SOC

DRAIN COCK 1/4"

ELBOW

THREAD PLUG

GASKET

ELBOW ASM

VALVE ASM

ELEMENT OIL FILTER

OIL COOLER GASKET KIT S60 UNIVERSAL

BOLT, SPL M8 X 1.25 X 73.0

SEAL RING

THERM 190

CLAMP HOSE

CLAMP

WASHER

BOLT, 3/8"-24 X 1.125" (12.9001)

WASHER

CONNECTOR

DRAINCOCK,3/8"( 12.9510)

GASKET, PWR STRG PMP COVER/FUEL PUMP

BOLT HEX FLG B16

BOLT PHOS HEX FLG LRG

CLIP .688 DIA 3/8 BOLT CTD

BASE F/FLTR PRIMARY 3/8 X 3/8 NPTF X .5*

INJ HOLE KIT

VIB DAMPER

NAME PLATE

BUSHING

OIL PUMP 60 GEAR DRIVEN

WATERPUMP KIT

BOLT M10 X 1.50 X 70.0 LONG 10.9

BOLT, M12 X 1.75 X 65

GASKET FUEL PUMP TO GOVERNOR

ELBOW, 45 DEG. 3/8 FLD TUBE 1/4 PIPE (1*

WASHER FLAT, 5 /8 INCH

CLAMP, 2 3/4"-3 5/8" ID HOSE (NON RC)

CORROSION INHIBITOR CONC. COOLANT CS100*

SEAL REAR

REMAN CYLINDER KIT 16:1 SERIES 60 14L E*

SHELL SET, STD CONN ROD DRILLED UPR/LWR*

FUEL PUMP ASSEMBLY S60 14L DDE

HOSE ASSY., #6 X 19.42 LG

TURBO ASSEMBLY 1.03 A/R WATER C

PLUG - M14 X 1.5 S60 14L DDEC VI EP

CORE ASSY.,ENG OIL CLR 11 PLT MODINE

CLIP - 1 1/2 INCH INNER DIAMETER

HOSE, WAT SPLY 90DEG HADADY EXH MFD WAT*

HOSE ASSEMBLY NO 06 X 12.30 LO

HOSE ASSEMBLY NO 06 X 26.90 LON

SHUT-OFF VALVE - COOLANT FILTER

GASKET AIR COMPRESSOR S60 14L

BOLT M14 2.00 X 40.0 LONG 10.9 P

BOLT M10 X 1.50 X 110.0 LONG 10.9

BOLT M10 X 1.5 X 55 LONG 10.9 PHOS

BOLT - M10 1.5 X 25 LONG, 10.9, PH

BOLT M14 2.00 X 50.0 LONG 10.9 PH

BOLT M14 2.00 X 95.0 LONG 10.9 PH

HARNESS ASSEMBLY - ENGINE, HAZ

SCREW M8 X 1.25 X 25.0 LONG SELF

BOLT M10 X 1.50 X 70.0 LONG 10.9 PH

BOLT M10 X 1.50 X 130.0 LONG 10.9

RING - SEAL RECTANGLE S60 14L DD

ADAPTOR REMOTE MOUNT OIL FUEL

WASHER SEAL REMOTE MOUNT OIL

BOLT 1 5/8-12 HEXAGONAL ADAPTO

HOUSING ASSEMBLY - OIL COOLER,

GAUGE ASSEMBLY OIL LEVEL SNAP

BOLT M10 1.50 X 135 LONG

BOLT M14 2.00 X 100.0 LONG 10.9 PH

BOLT M14 2.00 X 60.0 LONG 10.9 PH

ADAPTOR ASM

NUT 7/16 - 14 HEXAGONAL FLANGE

BOLT M14 2 X 140 LONG 10.9 PHOSP

DRIVE ASSEMBLY - FUEL PUMP, S60

TUBE ASSEMBLY TURBO WATER OU

Y-TUBE

TUBE WATER TEE T - STAT SPACER S

ELBOW TURBO COMPRESSOR OUTL

HOUSING THERMOSTAT S60 14L DDE

PULLEY - CRANKSHAFT S60 14L DD

DRIVE ASSEMBLY AIR/BRAKE COM

PULLEY FAN S60 14L DDEC IV

SEAL RING

GASKET

BOLT PHOS HEX FLG LRG

PLUG 1/2"PIPE

HOSE ASSY., #16 X 38.4" LG L&L

ELBOW 45 DEG 5/8-18 UNF-2A M14 X 1.5-6 G

ELBOW 90 DEGREE 37 DEGREE - OIL

BRACKET

TUBE WATER 2.00 DIAMETER S60 M

SPACER AND TUBE ASSEMBLY - THE

ELBOW 45 DEG 5/8-18 UNF-2A M14 X 1.5-6 G

PLUG PIPE 1/4-18 VIBRASEAL HEX HD

OVERHAUL KIT GASKET

MAIN BRG KIT

INJ HOLE KIT

WASHER

BOLT, M16 2.0 X 1.75.0 LG HEX 10.9 (12.*

WASHER

WASHER

WASHER

WASHER

SHELL SET

INTAKE VALVE (P)

BOLT, M12 X 1.75 X 65

BOLT PHOS HVY HEX FLG

CAM BRG SET

SCREW ASM EXH VALVE ADJ UNITIZED S60

SCREW ASSY., INJECTOR ADJUSTING UNITIZE*

SCREW ASSY., INTAKE VALVE ADJUSTING UNI*

NUT, 3/8"-24 HEX JAM

NUT, M12 X 1.75

STUD/SEAL KIT

EXH VALVE

BOLT PHOS HVY HEX FLG

SEAT ROTATOR

SEAL EXH VALVE STEM (4 VLV)

ROTATOR ASSY

VALVE LOCK

GASKET

SLEEVE ASM

BOLT 12 PT

ISOLATOR EMC MOUNT

HARNESS ASSEMBLY - ENGINE, HAZ

SENSOR ASM

SENSOR ASM

SENSOR ASSEMBLY

BOLT M5X0.8X20MM, 10.9 ANSI

SENSOR, TEMPERATURE (PLASTIC)

SENSOR, OIL/FUEL PRESSURE

SENSOR,TEMP

SENSOR

VALVE

F/PMP(VITON)

ADAPTER STGHT R-FLARE

BUSHING

COUPLING FUEL PMP DRIV BARNES

PRIMARY FUEL FILTER

ELBOW

BOLT PHOS HEX FLG LRG 6174M

VALVE ASM

BOLT, M10 X 1.5 X 20.0

BOLT, M10 X 1.5 X 30.0 MM

HOSE ASM N06 16.5 B+P FITTING

HOSE ASM N08 34.8 H+H FITTING

CLIP .688 DIA 3/8 BOLT CTD

DRAIN COCK 1/4"

WASHER

CONNECTOR 3/8"

PLUG PIPE 1/4 SQ SOC

ELBOW

PLUG 1/2"PIPE

GASKET,TURBOCHARGER EXHAUST

CLAMP, 4.44" DIA

NUT, 1/4-28 LOCK

OIL PUMP 60 GEAR DRIVEN

ELEMENT

GASKET

VALVE ASM

OIL FILTER

BOLT, SPL M8 X 1.25 X 73.0

CORE ASM

PLUG - M14 X 1.5 S60 14L DDEC VI EP

PLUG PIPE 1/4-18 HEX HD STL CTD RED

ELBOW ASM

SCREW

CHAIN

SEAL RING

ADAPTOR O/G

PLUG PIPE

BOLT ASM

WATERPUMP KIT

BOLT M10 1.50 X 135 LONG

O RING SEAL

THERM 190

GASKET

PLUG PIPE3/4

CLAMP

CLAMP

CLAMP HOSE

ADAPTOR

TUBE ASSEMBLY TURBO WATER OU

TUBE ASM

CONNECTOR

DRAINCOCK,3/8"( 12.9510)

BOLT M10 X 1.5 X 170

BOLT, M12 X 1.75 X 30 MM

HOSE AIR COMP

SCREW M8 X 1.25 X 25.0 LONG SELF

BOLT M10 X 1.50 X 110.0 LONG 10.9

CRANK 6 HOLE

HOSE ASM

BOLT, M8 X 1.25 X 20 12 PT. (23506222)

FILTER, FUEL SECONDARY

TURBOCHARGER ASSEMBLY

BOLT M10 1.50 X 70.0 LONG 10.9

M8X1.25X50 MM HHCS

BOLT PHOS HEX FLG LRG 6174M

SEAL LIP TEFLON S60

CLAMP, 2 3/4"-3 5/8" ID HOSE (NON RC)

HOSE ASM

GASKET

ELBOW 90DEG 3/4 TUB 1/2 NPTF BRS W/SEAL*

FITTING

If the bidder is authorized distributor (Indian/Foreign) of OEM (foreign origin) for supply to India/ ONGC then bidder to provide the details of price being charged by foreign manufacturer either on Ex-works or FOB or CFR basis, as the case may be, in its bid.

i) Prices quoted by bidder shall be firm during execution of the contract / order and not subject to variation on any account. ii) If different unit ex-works prices/packing and forwarding charges are quoted by bidder for multiple items having same manufacturer part no and item description , then the lowest unit ex-works price/packing and forwarding charges quoted will be considered for evaluation and placement of order. iii) Interchangeability certificate shall be provided by bidder wherever there is change in part numbers iv) Bidder to quote merit rate of GST applicbale as on bid submission date. However, Concessional rate of GST shall be payable by ONGC against submission of EC. In case EC is not provided by ONGC then the merit rate of GST will be applicable.

If the bidder is authorized distributor (Indian/Foreign) of OEM (foreign origin) for supply to India/ ONGC then bidder to provide the details of price being charged by foreign manufacturer either on Ex-works or FOB or CFR basis, as the case may be, in its bid.

i) Prices quoted by bidder shall be firm during execution of the contract / order and not subject to variation on any account. ii) If different unit ex-works prices/packing and forwarding charges are quoted by bidder for multiple items having same manufacturer part no and item description , then the lowest unit ex-works price/packing and forwarding charges quoted will be considered for evaluation and placement of order. iii) Interchangeability certificate shall be provided by bidder wherever there is change in part numbers iv) Bidder to quote merit rate of GST applicbale as on bid submission date. However, Concessional rate of GST shall be payable by ONGC against submission of EC. In case EC is not provided by ONGC then the merit rate of GST will be applicable.