WORK OF PROVIDING MID SPAN JOINT IN Y AND B PHASE CONDUCTOR AT LOC NO. 26A- 27C OF 132 KV BANDA (220) - KABRAI LINE TO REMOVE DAMAGED CONDUCTOR OF LINE UNDER ETD HAMIRPUR

Amount

Details of Work.

Replacement of damaged conductor of Y and B Phase between loc. No. 26A - 27C of 132 KV Banda (220)-Kabrai line by providing mid span joint under ETD Hamirpur :-

Shifting of material like conductor length 800 mtr., fitting, 120 KN disc insulator and Nut & Bolts etc. from 132 KV S/S Mahoba to site (Approx Distance = 50 KM and returning the balance material to concerned JE at 132 KV S/S Kabrai.

Making stay arrangement for Y & B Phase cross-arm of tower loc. no. 27C for safety for tower by digging the pit of proper size 1x1x1 meter in earth and providing necessary earth weight on anchor of steel wire and removing the stay after work completion and filling the pit with earth.

Complete re-tightening the whole tower from peak of tower to bottom and fixing missing nut & bolts in tower parts at loc no. 27C . All material will be provided by department free of cost as per actual consumption.

Opening of Y & B Phase Jumper from X-arm of 27C towards loc. No. 26A one end provided at single tension fitting and other end from conductor by opening nut and bolts carefully.

Destringing the conductor of Y & B Phase with insulator string at subjected loc. 27C with safety by taking the conductor load on steel wire rope by providing comeolong clamp on Panther conductor and fitting the arrangement for this job at site.

Laying the Panther conductor (180-200 Mtr.) in length upto last end of damaged conductor Y & B Phase for mid span joint. Separating the insulator string from old conductor fitting, marking on the new conductor for compression of single tension fitting with proper care and compressing the single tension fitting (earthwire and conductor) with hydraulic compressor machine taking all measurements before and after of compression of fitting.

Compressing the mid span joint on Y & B Phase with compressor machine taking all necessary measurements including proper cutting of old counductor for mid span joint. along with all T&P and labour.

Lifting of conductor with string upto cross-arm with steel wire rope arrangement/ conventional arrangement and fitting the insulator string D-shackle in cross-arm by maintaining the proper tesion of line conductor. Includingt fixing the old jumper on the dead end fitting.

Rates qouted by the bidders shall be without taxes. Taxes applicable if any to paid extra

M/S DINESH KUMAR CONTRACTOR

sakshi enterprises