REPAIRS TO FOOTPATH, DRAINS, HARD STANDING AND BOUNDARY WALL/ FENCING OF AREA -I OF AGE B/R (WEST) AT COLABA MUMBAI

Amount

Demolition of stone slabs and tiles of any description and thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site out side of MoD land all as specified and directed.

M&L rubber moulded glossy finished 60 mm thickness precast cement concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of M-35 Grade with grey cement and pigment laid over sand cushning 25 mm thick compacted thickness of bed of coarse sand, filling the joints with fine sand including compaction of paver blocks using surface vibrator all as specified and directed.

M&L glazed/matt finish chequered cement concrete coloured tiles 25 mm thick area of each tiles exc 0.09 Sqm but not exc 0.36 Sqm, set, jointed and pointed in neat cement slurry (with grey cement and pigment) after and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles all as specified and directed. Make -Somany/Rak/Kajaria or equivalent

M&L for vitrified heavy duty outdoor anti, skid full, bull -noise finish, self embossed grooves body tiles 10 mm thick of any colour (Square/rectangular, 600mm x 600mm) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and including 20 mm thick in cement plaster in CM (1:4) for fixing tiles any where all as specified and directed. Make -Somany/Rak/Kajaria(Grandstone Crema series) or equivalent

M&L for any coloured digital matt finished EPDM rubber flooring tiles 20-25 mm thick (Square 500mm x 500 mm) area of each tile exc 0.09 Sqm but not exc 0.36 sqm, set and jointed field apply adhesive material SR2 to match the shade of tiles and fixing tiles anywhere on floor all as specified and directed.

M&L for any coloured digital ultra strong/heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square / Rectangular, 600mm x 600 mm) polished area of each tile exc 0.09 Sqm but not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over including 20 mm thick in cement plaster in CM (1:4) for fixing tiles anywhere all as specified and directed. Make -Somany/Rak/Kajaria(Geostone series) or equivalent

M&L 20mm thick Granite (of any type) machine cut laid over floor cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and direceted.

M&L 20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and direceted.

Dismantiling and refixing after preparation of sub base, 25mm thick coloured chequred cement concrete tiles with gray cement and colour pigment of size 300mm x 300mm/200x200mm set, jointed and pointed with neat cement slurry with as in floor including 20mm thick cement mortar screed bed in CM 1:4 all as specified and directed.

Dismantiling and refixing after preparation of sub base, 60mm/80 mm thick coloured interlocking tiles with gray cement and colour pigment set, jointed and pointed with neat cement slurry with as in floor including 20mm thick cement mortar screed bed in CM 1:4 all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise specially provided for all as specified and directed.

Supplied and fixing of framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.

Supplied and fixing of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to FE 290 Gde -E-165 all as specified and directed.

S&F in repair steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and directed.

S&F mild steel 2mm thick , plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over a coat of epoxy primer all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent

Dismantling of fencing wire mesh any type all as specified and directed.

Supply only chain link MS galavanised fencing all as specified and directed.

Fixing only chain link fencing including line wires, and mesh size type of stadards, rail straining bolts etc size of mess 100x100mm 4mm dia wire complete all as specified and directed.

S&F MS bolts machine made with hexagonal or square head one end and screwed the other or screwed both ends n.exc 5 cm long 12mm dia. all as specified and direceted.

S&F in repair Galvanised, 2 strand, steel, barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified and directed.

S&F in repairs concertina coil fencing with punched tape concertina coil 450 mm dia up to 3.0 m height of wall with existing angle iron Y shaped placed 2.4 m or 3.0 m apart stud tired with G.I barbed wire tied to angle made from High Tensile Spring Steel - High Carbon Wire conforming to IS 4454/ Part -1 /Grade –SM duly Hot dipped galvanized with diameter starting from 2.50 mm , UTS 1670 N/mm2, Heavy zinc coating with minimum 230 gms per sqm all as specified and directed.

M&L for providing and fixing stainless, steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed. .

Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removed from site of work etc all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for including removing debrise from MoD land all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided including removing debrise outside MoD land all as specified and directed.

Material and labour 75mm thick PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in plinth protection and all other similar works, finishing the cement concrete surfaces even and smooth without using extra cement all as specified and directed.

Material and labour for forming construction joint 30mm deep X 10mm wide with sealing compound grade A all as specified and directed.

Material and labour for READY MIXED CEMENT CONCRETE DELIVERED ON BUNKER M-20 grade 1, 1:11/2:3 (using 20 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

Material and labour 75 mm thick PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:4 in road side kerb stones of size 450 x 300 x 150 mm or similiar with longer facing edges tapered on top and all other similar works all as specified and directed.

Material and labour for preperation of old / new pre-cast concrete kerb stone surfaces or similiar concrete surfaces and applying two coats of industrial epoxy paint over a coat of primer of any colours and pattern all as specified and directed .

Material and labor for two coats of epoxy concrete floor coating on surface (consists of hardner and resin ) over one coat of primer for creating a bonding between epoxy and concrete surface, before applying, prepare the surface from any undulation (using wire brush or electric floor scrubber, etching) removing all oil and grease stain if any, and brooming the surface clean to remove any settle dust particle, filling the cracks with suitable epoxy grout material and then applying the coating with the help of a roller all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

M&L for brick work with fly ash modular building bricks having standard size built in CM 1:6 all as specified & as directed.

All as per item No 37 here in before but but except bricks. Note:- Serviceable bricks obtained from Item above to be reused.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work, finished surfaces even and smooth without using extra cement all as specified and directed.

M&L 20mm thick cement plaster on fair face of brick or concrete surfaces in two layers of 15 mm+5 mm in cement mortar 1:4, each coat shall be mixed with water proofing powder @ 2% of cement or as per manufacturers instuction including necessary scafolding all as specified and directed. Note:- Water proofing compound shall be measured separately under respective item.

Supply only intergral water proofing compound powder confirming to IS- 2045 all as specified and directed.

Dismantling of RCC jali of any description and in any position all as specified and directed.

M&L for providing precast cement concrete (1:2:4) type BO (using 12.5 mm graded crushed stone aggregate) as in jallies 40 mm thickness(measured solid) including all mouldings and frame set in cement mortar (1:4) all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete and like all as specified and direcetd.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork all as specified and as directed.

M&L RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded crushed stone aggregate) as in precast cover slab perforated fixed in position , tie between two brick walls and all other similar works set in CM 1:4 including necessary form work all as specified and directed.

M&L mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.

S&F in repairs cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, ralling, frames, manhole covers, fire and shoot doors,balusters and similar articals exc 5 kg each by weight all as specified and directed.

S&F MS plate (chequered) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150 mm handle all as specified and directed.

Cleaning of open drains width of drains n. exc. 30 cm by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as specified and directed.

Cleaning of open drains width of drains exc. 30 cm but n.exc. 60 cm by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as specified and directed.

Cleaning of open drains width of drains exc. 60 cm but n.exc. 75 cm by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as specified and directed.

Cleaning of drains/culverts width n. exc. 30 cm including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as specified and directed.

Cleaning of drains/culverts width exc. 30 cm but n.exc. 60 cm including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as specified and directed.

Cleaning of drains/culverts width of drains exc. 60 cm but n.exc. 75 cm including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land all as specified and directed.

Taking down rain water pipes/PVC pipes/cemented pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc.at any height, any location, any floor including all necessary scaffolding all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and as directed.

S&F 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding all as specified and as directed.

S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding all as specified and as directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all as specified & as directed.

M&L RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, and all other similar works all as specified & as directed.

Supply and fixing in repairs 200 mm dia reinforced concrete pipes, class NP3 laid and jointed with collar all as specified and directed.

Material and labour for providing PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains finished surfaces even and smooth all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends all as specified and directed.

M&L preparing new surfaces of walls/ceilings and and applying two coat of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) over a coat of primer (Ultima Protek Duralife Basecoat) or equivalent) and scaffolding where ever required at any height for external painting all as specifed and directed.

M&L for preparing old surfaces of walls/ceilings by scrapping/rubbing and applying two coat of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) including necessary scafolding of any height for external painting all as specifed and directed.

Removing and refixing of MS / Steel drain cover with steel frame after peaparation of base/edegs of menhole / drain all as specified and directed.

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.

SRI SAIRAM COUNSTRUCTION

SAHU AND SAHU CO.

Frends Enterprises

Nilesh Construction

Unitech Enterprises

SAI SIDDHI CONSTRUCTION

Bidder Name

Unitech Enterprises

Frends Enterprises

Nilesh Construction

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

SAI SIDDHI CONSTRUCTION