As per tender document

SUPPLY & ERECTION OF FOLLOWING MATERIAL AS PER RESPO NORMS:-

33KV Line Isolator

33KV Bus Isolator

33KV Lightning Arrestor

33 KV VCB

VCB Plinth and Foundation

33 KV CT 200/100/1A

33 KV Fuse set

33kV 1 Ph PT 33kV/110 V

33kV Control panel for double T/F without differential relay

11 KV VCB Switchgears with Incoming CTR 600/300/5A, 350MVA

11 KV VCB Switchgears with Outgoing CTR 200/100/5A, 350 MVA

11 KV VCB Switchgears Bus Coupler 350 MVA

24 Volt battery and battery charger with cabinet complete

33 kV Pin Insulator

33KV Post Insulator

33 KV G.I. Pin with Nuts

11 KV 3 Core Al. XLPE Insulated 3x300 mm sq. Cable

11 KV 3 Core Al. XLPE Insulated 3x185 mm sq. Cable

ACSR Dog conductor

P G Clamp DOG to DOG

Control Cable (Copper) 4x2.5 mm sq.

Control Cable (Copper) 2x2.5 mm sq.

90 lbs Rail pieces for transformer 44.64 Kg/M

Outdoor switchyard and approach road lighting

T & P of Sub-Station & Switchgears (As per Specification)

4.5 Kg. CO2 fire extinguisher, portable type

5 kg. Dry chemical powder fire extinguisher, portable type

Fire buckets (4 nos.) with stand filled with dry sand

Rubber matting 20 sq. mm. thick size (1 X 2 mtr.)

S/S name board (SMC) with stand as per REC specification.

Power Transformer Plinth of size 3.46x4.46 Mtr. having 0.5 Mtr. below ground level and 0.4 Mtr. above ground level.

Indoor earthing of equipments in control room

Outdoor equipment earth mat

Barbed wire fencing with Gate (No)

Cost of accessories for mounting of 63 KVA T/f

Chemical Pipe earthing as additional earthing (for T/F, LA, CT & PT) with GI Strip (50x6 mm)

11KV XLPE Cable (3x300 Sq.mm.) Heat Shrinkable Jointing kit boxes O/D

11KV XLPE Cable (3x300 Sq.mm.) Heat Shrinkable Jointing kit boxes I/D

11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit boxes mounted with switchgear Indoor.

11KV XLPE Cable (3x185 sq.mm.) Heat Shrinkable Jointing kit Outdoor

Terminal Gantry Structure

Transformers bus bar complete with structure

Structure for 33 kV Line Isolator with Plinth & foundation

Structure for 33 kV Bus Isolator with Plinth & foundation

Structure for 33 kV Fuse Set with Plinth & foundation

Structure for 33 kV Post Insulator (3 nos.) with Plinth & foundation

Structure for 33 kV C.T. (3 nos.) with Plinth & foundation

Structure for 33 kV Lightning Arrester (3 nos.) with Plinth & foundation

Structure for 33 kV Single PT (3 Nos.) with Plinth & foundation

Laying of 11 KV XLPE cable on D/p

Laying of 11 KV XLPE cable UG including cost of sand and bricks

Painting of S/s structure

8.5 Mtr. long. PCC Pole

11KV/0.433 KV, 3 Phase, 63 KVA Transformer (BEE standard, 3 star rating self protected type), Al. wound

LT Aluminium armoured insulated Cable of size 3.5x70 Sq.mm.

11KV TPMO with fixing clamps

11KV Fuse Set (Drop out) with clamps

M.S. Top channel 100x50x6 mm., 2240 mm long

MS Channel 100x50x6 mm 2028 mm long (For TPMO, Fuse set & LA)

MS angle 75x75x6x2028 (T&F base & LT DB)

Chemical Pipe earthing as additional earthing (for T/F, LA, CT & PT) with GI Strip(50x6 mm)

Earthing of pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc.

Grouting of 8.5 M Long PCC Poles (0.268 Cu m)

Stone Pad

9 Meter long PCC Pole

11 Meter long STP (SP-55)

13 Meter long STP (SP-72)

33 KV XLPE Insulated Al. Cable of size 3x300 mm2

33 kV composite Polymeric Pin Insulator

33 KV Disc Fitting B & S type (70 KN)

11 KV Disc. Insulators B&S type 70 KN

33 KV Steel X-arm V type (MS Channel 100 X 50 X 6 mm )

33 KV Cross arm holding clamps with bolts & nuts 9 mtr pole

33 KV Cross arm holding clamps with bolts & nuts 11 and 13 mtr pole

F- Bracket for 33 KV line 9 mtr pole

F- Bracket for 33 KV line11 and 13 mtr pole

E- Bracket for 33 KV line

MS Angle Iron 65x65x6mm, 4300 mm long bracing with 4 clamps

M.S. Top Channel 125x65mm, 3200 mm (10.7kg/mt) with clamp, bolts, nuts and washers

33 KV MS Dropper Channel 100x50x6 mm with holding clamp, bolt, Nut & washer.

PG Clamps for Dog to Dog

Bolt, Nuts & Washer

33 KV Stay Complete 20x1800 mm with concreating

M.S. Guarding angle 75x75x6 mm, 3500 mm long with holding clamp, packing piece, nut & bolts etc.

G.I. Pipe 6" dia. "C" Class Clamps etc.

G.I. Barbed wire

G.I. Wire No. 6 SWG

G.I. Wire No. 10 SWG

Stone Pad (300x300x75mm)

33 KV Number Plate with Clamp and Nuts & Bolts

33 KV Danger Board with Clamp and Nuts & Bolts

Alluminium binding wire - 6 SWG

Alluminium paint

Red Oxide Paint

cable support clamp

Turn Buckle

Eye Bolt

Heat Shrinkable Jointing Kit Outdoor for 33 KV 3x300 sq. mm XLPE Cable

HDPE Pipe (160 mm dia.) for UG Laying of 3x300 sq. mm. 33 KV XLPE Cable (Pipe to be laid by HDD Method)

Grouting of PCC 9.0 mtr Pole (0.286 cum)

Concreting of supports (11 Mtr. STP)(0.44 cum)

Concreting of supports (13 Mtr. STP)(0.64 cum)

Tree cutting compensation

laying of cable by excavation of earth, laying of bricks to cover the cable and filling of sand & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 sq. mm including cost of Bricks, sand, clamps etc.

Laying of cable in HDPE Pipe underground minimum 3 meters below by HDD Method along with laying of 33 KV 3x300 Sq.mm. XLPE Cable in HDPE Pipes.

Laying of 33 KV 3x300 sq.mm XLPE Cable in G.I. Pipe on double pole

Making of Proper heat shrinkable J/k

8.5 Mtr. long. PCC Poles

ACSR Rabbit Conductor

11KV 45 KN Disc fitting T&C type complete

stay set complete 16x1800mm

11 KV Polymeric Pin Insulators

11KV Disc Insulator T&C type 45 KN

M.S. channel 100x50x6 mm., 2240 mm long

M.S. Angle Iron 50x50x6 mm, 2700 mm long bracing complete with 4 clamps

11KV V-Type Cross-arm (Angle 65x65x6mm)

Tee-off Channel 100x50x 1300 mm with clamp, Nut & Bolt

Guarding Cross-arm (M.S. angle 65x65x6mm/1.6 Meter long), 5.8kg./M=9.28kg.

F-bracket with bolts & nuts

E-Brackets with nuts & bolts

Clamp for fixing X-arms with bolts and nuts

Holding clamps for Top channel, MS Channel & MS Angle with bolts & nuts

11 KV Danger Board with Clamp and Nuts & Bolts

P.G. Clamp for ACSR Rabbit/Weasel

Painting number mark with paint

Grouting of 8.5 M Long PCC Poles (0.268 Cu m)

Concreting of supports (11 Mtr. STP) 0.44 Cu m)

Erection of 2x5 MVA Power Transformer.

AMIT ENGINEERING CORPORATION