SPECIAL REPAIR TO BLDG NO DL17 SINGLE LIVING ACCN AT PW DIV AT INF SCHOOL UNDER GE MAINT INF SCHOOL MHOW

Amount

B/R ITEMS:

M&L for removing the existing APP membrane roof treatment of any description including screed bed /plastering of any thickness and removing the debris outside MD land etc. and carrying out the following roof treatment complete all as specified and as per Manufacture's instruction (a) Cleaning the existing roof surface and brushing with neat cement slurry @ 3 Kg per Sqm area al as specified (b) Rendering 15mm thick in cement mortar 1:4 mixed with integral water proofing compound and finish the surface even and smooth without using extra cement (c) Preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm (d) Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified. (e) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces (1st coat as a bonding material below membrane and 2nd coat on top of membrane (f) APP based polymeric membrane 3mm thick and minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as per Manufacturer instruction (g) Applying two coats of bitumen based aluminium paint @ 0.15 Kg/Sqm for each coat over APP membrain including preparation of surface complete all as specified

M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate ,25mm thick as in roof top,finished even and smooth without using extra cement complete all as specified .

M&L for vitrified ceramic coloured (Glossy finish) tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling existing tile / plaster of any description complete all as specified and as directed

M&L for vitrified ceramic coloured (Glossy finish) tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10mm thick back coat of plastering in cement mortar 1:4 and dismantling existing tile / plaster of any description complete all as specified and as directed

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing and dismantling existing slab / plaster of any description complete all as specified

All as per item no 05 above but in skirting including 15mm thick backing coat in CM (1:4 ) complete all as specified

M&L for 18mm to 20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size in floor,cooking platform,jambs,window cills etc and like bedded and jointed in grey cement slurry and pointed with coloured cement (1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in cement mortar 1:4 including polishing by using mechanical grinder complete all as specified and directed. Note : Size of Granite slab shall be maximum as available at market /as per site requirement and shall be approved by GE

M&L for 18mm to 20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size as in vertical surgaces ,pillars etc and like bedded and jointed in grey cement slurry and pointed with coloured cement (1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 10 mm thick rendering in cement mortar 1:3 including polishing by using mechanical grinder complete all as specified and directed. Note : Size of Granite slab shall be maximum as available at market /as per site requirement and shall be approved by GE

M & L for repair to sunken floor by providing the following water proofing treatment to sunken floor surfaces of RCC slab all as specified and directed :- (a) Demolition of old sunken treatment surface of any description carefully without damaging the roof structure and cleaniong of all loose particles and apply cement slurry @3.00 kg / sqm on old cleaned surface by brushing. (b) Provide PCC 1: 1.5:3 type A0 using 12.5mm graded stone aggregate as in required slope , average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or other equivalent as approved, finish the surface even & smooth without using extra cement. (c) Rendering 15mm thick in cement mortar 1:3 mixed with & including integral water proofing compound on sunken floor and sides of vertical surface of sunken portion. (d) Applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm on sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc complete all as specified and as directed. (e) After laying of all sewage/plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sides of sunken portion upto 600 mm height. (f) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with ployester non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed. (g) Filling sunken floor with PCC 1:5:10 type E2 using 40mm graded stone aggregate. (h) Fixing of 50 mm dia CPVC pipe projecting 450 mm clear of face outer wall to drain out seepage water if any. (j) Carry out water pounding test for four to six days all as directed by Engineer-in-Charge NOTE: (i)Water proofing treatment to sunken floor shall be executed through expert team of Manufacturer or through authorised applicator of Manufacturer and Tradesman having minimum five year experience in relevant field.Necessary documents in support of above shall be submiited to Engineer-in-Charge before commencement of treatment. (ii) The contractor shall give a written guarantee for effectiveness of treatment of roofing for 10[TEN] years from the certified date of completion of entire work. The guarantee amount shall be 3% of the cost of the water proofing treatment shall be retained by the Government from the contractor’s dues in lieu FDR shall also be provided by the contractor for 10 years validity (iii) Floor area only shall be measured for payment and nothing extra payable.

M&L for non skid ceramic coloured tile 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, over and including 15mm thick screed bed in cement mortar 1:4 in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles all as specified

M&L for glazed ceramic coloured tiles of size 450mm x 300 mm x 6 to 7mm thick as in dados , skirting etc over and including backing coat 10mm thick in cement mortar 1:4, jointed in neat grey cement slurry and pointed in colour cement to match the colour of tile all as specified

M&L for rendering 15mm thick in cement mortar 1:4 mixed with integral water proofing compound and finish the surface even and smooth without using extra cement including taking down old cement plaster of any description complete all as specified and directed Note: WPC shall be measured and paid separately under respective item .

M&L rendering 10mm thick in cement mortar 1:6 on brick surface of walls finished the surface even & smooth without using extra cement including taking down old cement plaster of any description complete all as specified.

Supply only liquid water proofing compound.

M&L for complete removal of existing treatment of any type from surface of wall without disturbing the plaster and clean the surface free from dust,loose particles etc and providing and applying minimum 1 mm to 1.50mm thick wall care putty over prepared surface and finished the surface even and smooth for painting complete all as specified

M&L for two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre /10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm over new surface including preparation of new surfaces complete all as specified

M & L for preparation of old treated wall surface of any description and applying two coats of oil bound distemper with roller complete all as specified and directed.

M & L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified

M&L for preparation of old treated steel surfaces of any description exceeding 10cm in width or girth and applying one coat of synthectic enamel paint complete all as specified

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm in width or girth and applying one coat of synthectic enamel paint complete all as specified

S&F in repairs 16mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified

S&F in repairs 25mm outer dia 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified

S&F in repairs PVC (SWR) pipes 110mm bore singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified

S&F in repair PVC (SWR) vent cowl 110 mm bore complete all as specified

S&F in repair PVC (SWR) bend with access door 110 mm bore complete all as specified

S&F in repair PVC (SWR) bend110 mm bore complete all as specified

S&F in repair PVC (SWR) branch piece 110 mm dia bore single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified

S&F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench and including as old cast iron pipe and complete all as specified

S&F in repair 75 mm bore PVC (SWR) bend with access door complete all as specified

S&F in repair of rotational moulded polythylene water storage tank (double layered) 1000 Litres capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

S&F in repair of rotational moulded polythylene water storage tank (double layered) 500 Litres capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

S&F in repair wash hand basin vitreous china of size 550x400mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified

S&F in repair pedestal pattern Vitreous china wash down water closet pan white colour, with 110mm PVC (SWR) 'P' trap including joint run and lead front or back inlet,connection to drain (or out going pipe ) and to flushing pipe anti-syphonage pipe ,plastic water closet seat cover white closed pattern with a flat bottom and cover complete as specified and directed.

S& F in repairs to mild steel chromium plated health faucet with 1.5m SS tube and hook complete all as specified

S&F in repair fancy chromium plated two way bib cock of 15mm bore screwed for iron pipe or brass ferrule etc complete all as specified

S&F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified Make : Cera/Plumber/Prayag

S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified Make : Cera/Plumber/Prayag

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends fixed to iron pipe at both ends complete all as specified

S&F in repairs CP Fancy type Angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified Make : Cera/Plumber/Prayag

S&F in repair CP fancy type stop valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified .Make : Cera/Plumber/Prayag

S&F in repairs CP Brass Fancy type shower rose 15mm dia with 125mm long CP Nipple of approved quality complete all as specified Make : Cera/Plumber/Prayag

S & F in repair of LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair of stainles steel gratings round type 150mm size minimum weight 100 gm complete all as specified

S&F in repair towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guilties and MS screws etc complete all as specified Make : Cera/Plumber/Prayag

S&F in repair PVC valveless, syphonic action type flushing cistern,10 litres capacity ,low /high level white with inlet ball valve float and handle including brackets complete all as specified. Make: Cera/Parryware

S&F in repair PVC waste pipe fixed to any type of coupling of length not exceeding 1.50m length complete all as specified

S&F in repair sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

S&F in repair PVC (SWR) multi floor trap 75mm diameter of outlet ,plain with grating including jointing with solvent cement complete all as specified

S&F in repair PVC body bathroom cabinet mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm of Model No 555 of PRAYAG or other equivalent as approved by GE complete all as specified

Taking down door shutter with frame exceeding 1.5 Sqm but not exceeding 4.00 Sqm each without taking of shutter from the frame complete all as specified

Taking down door shutter with frame not exceeding 1.5 Sqm each without taking of shutter from the frame complete all as specified

S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partitions upper partition shall have louvers with 3mm thick pin-headed glass and aluminum wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including making good the jambs all around in CM 1:3 finishied even and smooth complete all as specified and directed. Make : Jindal/Hindalco or other equivalent as approved by GE

S&F PVC door frame of size 50mm x 47 mm made out of 5 mm thick prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21

S&F for 150 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F 150 mm size aluminium anodized handle

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be in two parts , upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows with plastering in CM 1: 3 ,finished even and smooth complete etc including shifting of existing cooler stand wherever required and refixed complete all as specified and as directed by Engineer -in-charge. Make : Jindal/Hindalco or other equivalent as approved by GE (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S&F mild steel framed work such as grills,grating etc with ends of bars shoulders and /or riveted / welded in guard bars and similar works confirming to FE.290,Gde-E-165 all as specified

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 all as specified

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm in width or girth on untreated steel surfaces over a coat of red oxide primer including preparation of surfaces complete all as specified

Taking down shutters of any description not exceeding 1 Sqm each

Taking down shutters of any description exceeding 1 Sqm and 2 Sqm each

Taking down shutters and refixing in same opening of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each

S&F 25mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work all as specified

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified

S&F second class hard wood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified

S&F 100mm long butt hinges medium weight cold rolled mild steel

S&F in repair 100mm long butt hinges medium weight cold rolled mild steel

S&F in repair 200 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F in repair 200 mm long Aluminium anodizes barrel tower bolts of extruded section

S&F 150 mm size aluminium anodized handle

S&F in repiar 150 mm size aluminium anodized handle

S&F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified

S&F in repair of aluminium floor door stopper double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified

S&F in repair rubber beading 40mm wide , 5mm thick rubber beading fixed to door shutter with nails all as specified and directed.

S&F Hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate with screws 100mm size all as specified and directed

S&F in repair Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100m size all as specified and directed

S&F Aluminium alloy anodised sliding door bolt of 200mm size with hasp staple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F in repairs Aluminium alloy anodised sliding door bolt of 200mm size with hasp staple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

M&L for brickwork with fly ash bricks,straight or curved on plan exceeding 6m mean radius,built in cement mortar 1:4 including demolition of old brick work of any description complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 mixed with integral water proofing compound ,finished the surface even and smooth without using extra cement all as specified Note: WPC shall be measured and paid separately under respective item

M&L for rendering 10mm thick in cement mortar 1:6 on brick surface of walls finished even & smooth without using extra cement complete all as specified.

M&L for repairing of spalled concrete from RCC surfaces such as roof ceiling, beams, columns, parapets, chajjas etc as per the following :- (a) Preparation of existing surfaces carefully by chipping unsound weak/loose concrete with an electric hammer or manually including tapping all edges, making square shoulder of cavities etc not exceeding 50mm thickness, including removal of debris complete all as specified and directed. (b) Applying rust remover cum passivators Sika rust off 100 @ 0.20 Kg/Sqm in each coat as per manufacturer instructions to remove rust from existing reinforcement (Make :- Sika/Fosroc/Asian Paint). (c) Applying a epoxy base Zinc rich rebar corrison protection system of product Frianzic (R) @ 0.15kg /Sqm in each coat as per Manufacturer instruction. (d) Mixing and applying two components epoxy resin concrete bonding coat of Sikadur R&B-42 @ 0.10 Kg/Sqm (Mixing Proporation as per manufacturers instruction) including preparation of surfaces by chipping and thoroughly cleaning of surfaces complete wherever required over new reinforcement and as directed. (Make : Sila/Fosroc/Asian Paint) (e) Applying two layers of guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting not exceeding 40mm (Average thickness) in CM 1:2 using OPC 53 grade cement mixing with polycerate mixture 2% by weight of cement or as per Manufacturer instruction. (e) Applying a prebached one component polymer modified cementious patch repair mortar not exceeding 50mm in layers of 15mm thick each product Sika mono Top as per Manufacturer instruction to match with the existing surfaces as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, lintels, column and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto G+1 storey buildings including removal of all small tress /shurbs etc complete all as specified and directed. Note : Quoted rate shall be inclusive for necessary scaffolding as required to carry out the work upto a height G+1 floor.

M&L for precast reinforced cement concrete 1:2:4 type BI using 20mm graded stone aggregate as in manhole cover chaujjas, landing cover slab, shelves etc set in cement mortar 1:4 complete all as specified.Note:Reinforcement shall be measured and paid separately under relevant item

M&L for Mild steel TMT Bars,10mm dia and over cut to length,bent to shape required including cranking,bending spirally hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L for providing stainless steel railing for stair case consisting of stainless steel pipes of different dia including socket,reducer,knobs balls and cups of matt finish,type and size as approved by GE

E/M WORKS:

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc. complete all as specified

M&L for Point wiring using approved colour coding as as per IS with FRLS PVC insulated PVC unsheathed electric cable 1100V grade ISI 694 marked down through single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping shall be provided ) & 1.5 sqmm green FRLS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanized boxes and bakelite sheet /Modular Boxes for mounting switches, sockets, fan regulators etc for the following :

(a) One light point/fan/ Bell point controlled by one switch

(b) One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

All as per item No 93 here in before but using FRLS PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FRLS PVC insulated cable for 15 Amps socket point on independent board controlled by one switch.

M&L for Point wiring using approved colour coding as per IS with FR LSH PVC insulated and unsheathed electric cable 1100 volts grade single core having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area for phase & neutral, drawn in and including non metallic rigid PVC Conduit Pipe /casing caping not less than 25mm base size with all fitting and fixing accessories and with 1.5 Sqmm green FRLS PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs including galvanized/wooden boxes of suitable size with white laminated bakelite sheet/Modular Boxes for mounting switches,sockets etc complete for the followings.

(a) One light/ fan/ bell point controlled by one switch

(b)One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

All as per item no 95 here in before but using FR LS insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified . Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or other equivalent in Wipro approved by GE

S&F in repairs LED round light fitting 15W recess mounting type,6000k complete with driver duly making connection with copper cable etc.complete all as specified Make: Havells Cat No. LHEBLDP7IN1W015 ,Bajaj Cat Pt No. BGSLO SLEEK 15W WH RD, or other equivalent in Crompton, Wipro as approved by GE

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat No ENXT P 36L WH CR PC SD of Bajaj or other equivalent make in Philips, Wipro ,Havells

S&F in repairs Modular Switch flush type 6 Amps single pole, one way complete all as specified. Make :Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush type complete all as specified. Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Modular Bell push flush type,6 Amps Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs Modular Switch 16 Amps single pole, one way Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

S&F in repairs modular fan regulator step type, 2 module type Make: Legrand Mylinc Series, Anchor Roma Plus, Crabtree Athena Series.

Taking down of old unserviceable sub main wiring of any type complete all as specified

Taking down old / unserviceable distribution board by disconnecting of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified

S&F Bell Electric Ding Dong type suitable for operation on 230 volt 50 Hz AC supply

S&F lamp holder, PVC body of brass suitable for battern fitting completes all as specified.

S&F Ceiling rose, surface Bakelite with three terminals, ISI marked for batten fitting complete all as specified

S&F LED 10 watt battern aluminium extruded with decorative end caps complete all as specified Make: Bajaj cat No. BCLSB 10 NW or other equivallent model in Wipro, Havells, phillips as approved by GE

S&F Energy saving new generation 10 watts LED bulkhead fitting IP 65 luminaire with opel diffuser pre-wired with warranty option of 5 years from the date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.Make:Bajaj Cat No : BIBWP 10W LED or other equivalent make in Philips/ Wipro/Havells as approved by GE

M&L for Sub main wiring in repairs with Four runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non-metallic rigid PVC conduit of not less than 32 mm dia concealed in the wall by cutting chases of wall and making good the disturbed surface, including two runs of FRLS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified Note: two Run of Single Core FRLSH ( 6Sq mm) Cable and one runs for same size as earth wire(6 Sq mm). Note: 4 runs of 6 sqmm single core multistandard copper conductor and two run of earth conduit conductor and one length of PVC conduit and its accessories shall be measured as one unit length.

M&L for three phase Sub main wiring in repairs with four runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including two runs of FRLS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Note: Four Run of Single Core FRLSH ( 6Sq mm) Cable and two runs for same size as earth wire(6 Sq mm).

S&F TPN phase segregated distribution board double door vertical type 4 way 415 volts, 50 Hz suitable for MCCB incommer IP 43 protection on wall/floor with necessary cement work and electrical connections complete all as specified Make- L&T Cat No-DBPGL004DD or in equavalent in legrand, C&S,Sechieider,ABB

S&F for sheet metal enclosere MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DB in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F for sheet metal enclosere MCB DB SPN 8 Way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DB in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified.

S&F for MCB tripple pole and neutral rated capacity 63 A,415 v breaking capacity 10KA complete all as specified and as directed.

S&F for MCB single pole and neutral rated capacity 5 to 32A, 240 v breaking capacity 10KA complete all as specified and as directed.

S&F for MCB single pole rated capacity 5 to 32A, 240 v breaking capacity 10KA complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation ,laying of cable or pipe ( where provide for protection of cable or fixing poles and stay and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engr-in-charge.

Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point.

Supply and laying well burnt bricks , locally available best quality (sub class "B'bricks) laid in tranches perpandicular to UG cable for protection complete all as specified

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable all as specified.Note - punned thickness only will be measured and paid.

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 3.5 core x 50 Sqmm complete all as specified and directed

Supply and laying galvanised iron pipe 'light Grade' 50 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed .Make Jindal/Prakash Surya/Tata

M & L for Earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed. Note :-Provide total length of galvanised earh lead wire size of 4mm from earthing pit to main DB through PVC pipe.

NIDHI CONSTRUCTION

Jamna Constructions

M/S GARG CONSTRUCTION

Auto Traders

M/S Sunshine Construction

M/S UnitedConstruction

SATHI ENTERPRISES

sunway associates

KAILASH CHANDRA KHANDELWAL