REPAIR/ROUTINE MAINTENANCE OF ELECTRIC LIFTS INCLUDING MAINTAINING AND OPERATION AT COMPOSITE BUILDING AND ADMIN BUILDING AT INS SHIKRA UNDER GE NW NOFRA COLABA MUMBAI

Amount

Mannual operation of electrically operated lifts fully automatic capacity 08/13/Goods lift to serve (G+06) 16 hrs daily in one shifts from 0800 Hrs to 1600 Hrs except Sundays & holidays including taking care from any pilferage, theft of damage of lifts etc complete all as directed for the following buildings:- (a) Composite Bldg INS Shikra (b) Admin Bldg INS Shikra Note :- (i) One lift operator to be employed in each bldg per shift. (ii) Passes will be processed alongwith (after verification of antecedence of deployed employees and verified experience certificate only. Pass shall not be granted without submission of proof of well qualified lift operators & experience certificate. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of pass) Note :- (a) There shall be two category of operators :- (i) One category is Rescue Operator who shall be invariably ITI qualified and trained for Rescue Operation for all the building - Each shift. (ii) The other category is for Lift Operator (semi skilled) duly trained for each building - Each Shift (b) Rescue operator having ITI qualification with at least 02 (Two) years practical experience shall posses thorough knowledge to rescue user in case of emergency like anybody getting trapped in lifts (Rescue Operator) for all building - Each Shift

(c) Passes will be processed alongwith (after verification on signed certificate, verified ITI certificate only. Pass shall not be granted without submission of ITI qualification proof & experience certificate. (d) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Lift Operator and Rescue Operator. (e) Payment to Lift Operators and Rescue Operators shall be done by crossed cheque only which shall not be less than minimum fare wages as per Act in vouge. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. After entire satisfaction of Engineer-in-Charge the payment action shall be processed further. (f) Rescue Operators shall be trained for rescue passangers of lift by an enlisted OEM / Lift maintenance contractor / Lift maintenance having approval lift licence issued by lift inspector of PWD and certificate for the same be submitted with proposal for passes. (g) Lift operator shall be available as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall affected.(h) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (j) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell.(k) In case of any necessity for rescue operation or accident, Rescue Operator shall be capable of rescue the passenger and reacting to the situation (accident etc). (l) Contractor shall submit the labour licenece VAT & Copy of GST Regn registered number issued by concerned authority. (m) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department.

Repair/maintenacne of lifts including carrying out daily check and periodical services of fully automatic electrical lift 13 ps with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell. Location :- Admin Tech and Composite building -04 Nos lifts

Taking down old wornout gear box of any make and size and supply and fix new gear box with allied items for suitable for 200 kg existing lift and make good all the disturbed surface all as specified and directed by Engineer-in-Charge.

Taking down old motor of any size and capacity and supply and fix new motor 3 Phase, 415 volt 11 KW of suitable size for existing lift complete all as specified and directed.

M&L for taking down old MSI beam and supply and fix new MSI beam, and necessary masonry work to match with existing surface complete all as specified and directed.

Disconnecting and taking out old defective V3F door operator with all connected accessories from existing car door, supply and fix new V3F door drive operator suitable to existing motor mechanism unit suitable for existing door opening and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift car door complete all as specified and directed.

Diconnecting and taking out unserviceable defective main VVVF drive from existing control pannel and supply and fix new main VVVF drive unit of Make : Yashikawa (Japan) suitable for 15 KW capacity in existing pannel and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift complete all as specified and directed in certain building at Nofra.Make- Yaskawa/Fuji

Disconnecting and taking out old defective infra red door sensor of any make and supply and fix new infra red door sensor up to full length of car door complete all as specified and directed in certain lift at Nofra. Make- Lamda, Weco, TL Jones as approved

Taking out old unserviceable cabin fan from car cabin, supply and fix new cabin fan non osciliating type axial flow, single speed 300mm sweep, 24 Volts, ISI mark with stainless steel grill complete all as specified and directed. Make- VBM/EMCO/SINI

Desconnecting and taking out unserviceable travelling cable from hoist way and supply and fixing new travelling cable PVC insulated 16 core flat / round type with multistranded copper conductor 1100 Volts grade of size 0.75 Sqmm confirming to IS and including thimbless suspended type freely move with car cabin up and down movements between ground and upper floors including necessary proper connection with midway junction and other connection required in circut complete all as specified and directed.

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers complete all as specified and directed in certain lifts at INS Shikra. Make : USHA MARTIN

Disconnecting and taking out governer steel wire rope after disconnecting from car cabin & supply and fix new steel wire rope 08 mm dia ungalvanised 08/19 construction in and including necessary connection with machine room and shaft pit complete with clamp nuts bolts and washers complete all as specified and directed

Supply and fix the counter weight guard at the bottom of counter weight raail covering full length to secure counter weight complete all as specified and directed.

Supply & Fix MS toe guard, beneath the car made of sheet 1.2 mm thick, with angle support, having size of 750 mm height and length equivalent to cabin door opening width

Supply & Fix MS angle barricte on the car top fully covering the car,properly drilled and fixed with nuts and bolts and complete paint over one coat of red oxide complete all as specified and directed.

Supply and fixing in repair of recessed mounting low height backlit square/round LED downlight 8W with non integral driver provides high quality ecomonic energy suitable for ceiling complete all as specified and directed.

Taking down old/unserviceable pit pulley and machine room pulley and supply and fix new pulley complete all as specified and directed.

Monarch Enterprises

Escon Elevators Pvt Ltd

Veer High Tech Solution