84819 REPAIRS TO ROAD, PATH, KERBSTONE AND ROAD FURNITURE IN SFC, PG ROAD, KOHIMA LINE AND CERTAIN OTHER AREA UNDER AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Repair to pot holes depth not exceeding 30mm thick, area not exc 1 sqm each sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying evenly priming /tack coat primer using paving bitumen VG-10 grade @ 5 Kg per 10 Sqm putting in bituminious premix macadem, well rammed and sealed with binder 9.8 kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed complete all as specified and directed by engineer In charge.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying evenly priming /tack coat on black top surfaces of bituminus primer using paving bitumen of grade VG-10 at the rate of @ 5 Kg per 10 Sqm all as direted by Engr-in-Charge.

M&L for premixed bituminous macadam (Design Mix) not exc 70mm in thickness (consolidated thickness) with 4% binder content of Bitumen Gde VG- 30 by weight of total mix mixed with aggregate (as specified) in hot mix plant and laid, rolled and compacted with 8 to 12 tonne power roller to required gradient and camber on prepared bituminous surface, complete all as specified and as directed (Note : Mix shall be obtained from hot mix plant and spreading shall be done by using mechnical paver)

M&L for Applying evenly a priming/tack coat paving bitumen with bituminous primer at 2.5 Kg per Gde VG-10 Sqm on bituminious macadam surfaces complete all as specified and as directed.

M&L for providing bituminious premix hot mix asphaltic semi dense concrete (design mix) 30mm thick (consolidated) thickness with 5.5% binder content (paving bitumen VG-30 grade) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed by Engineer In charge. (Note:- Laying shall be done by means of self propelled mechnical paver, finishing with suitable speed and capable of laying, spreading, tamping and finishing)

M&L for preparing of black top surfaces of road and applying thermo plastic paint 2.5mm thick for making lines, dashes, arrows, letters etc exceeding 10cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MOST & BIS specification, not less than 2.5mm thick of white/golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt oil grease etc complete all as spcified and directed by Engineer incharge

Supply and fix in repairs cat eye reflective type of road stud of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

Supply and fixing in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed by Engineer-in-charge.

S&F in repair solar delinator made out of poly carboate and toughened body of 80mm dia and delineated height 80mm comprise of super bright LEDs which gives 360 degree viewing solar panel 5 volt with visibility of 120m (approx), 3.7 Volt rechargeable battery of 1800 mAh with battery backup of 48 hours, also has a high intensity retro reflective band of 1" width for extra visibility. The delineator is mounted on MS pipe of height 1000mm and 50mm dia with an anti theft wire mesh provided over it for extra protection. Both the pipes and wire duly powder coated embedded in the ground with PCC 1:2:4 (300mmX300mmX300mm) including necessary excavation and earth work complete all as specified and directed.

Aadarsh Construction

MOHANLAL MATHRANI CONS. PVT. LTD.