GE/C-20/2020-21

Amount

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description areaexc 1.0 Sqm but n exc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge.

Plain, solid, straight chowkats and frames made out of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and as directed by Engineer-in-Charge.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS and magic eye, complete all as specified.

S & F factory made Glazed and skelton shutters 35mm open rebated and prepared to receive glass, gauge etc edges of framing plain champered or rounded fitted with cut & metered beads for securing glass etc sized of membane shutter as specified in SSR Part I Section 8, Clause 8.24 (a) supplied and fitted to chowkhats, 35mm thick 2nd class hard wood complete all as specified and as directed by Engineer-in-Charge.

S&F for 35 mm thick second class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel 9mm B.W.P or 12 mm veneered particle board with commercial veneering on both faces . The size of rail and style as per IS 1003/SSR part -1 complete all as specified and as directed by Engineer-in-Charge.

S&F for galvanise Stainless steel wire cloth 20mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed.

Supply and fix 300mm long, Aluminium alloy anodised, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified.

S&F Steel work in tubular trusses or frame, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed by Engineer-in-Charge including dismantling old frame ..Note :- frame provide over chhajja upto FOUR storey building including scaffolding .

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheets complete all as specified and as directed by Engineer-in-Charge. Note :- The steel sheets,to be provide over MS frame such as chhajja upto two storey building including scaffolding .

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge..

M & L for non skid 600x600x8 to 10mm thick coloured ceramic tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height. complete all as specified directed by Engr-in-Charge, and approved by GE Make-kajaria/Johnson,Somany

M & L for non skid 600x600x8 to 10mm thick coloured duble charge vetrified tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles ,complete all as specified and directed by Engr-in-Charge, and approved by GE Make-kajaria/Johnson,Somany

All as per item No 13 above but 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting on walls complete all as specified directed by Engr-in-Charge.

All as per item No 14 above but to 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting on walls complete all as specified directed by Engr-in-Charge, and approved by GE all as directed.

M& L for non skid coloured ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge, approved by GE Make - kajaria /Johnson ,Somany

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,complete all as specified and directed by Engr-in-Charge, approved by GE Make-kajaria/Johnson,Somany

Dismantling of stone slab marble of any description or thickness in floors, aprons etc laid, bedded & jointed in any mortar, complete all as specified and as directed by Engineer-in-Charge.

M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over 15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab mouldedand polished complete all as specified and as directed by the Engineer-in-Charge.

M&L for 18 to 20 mm thick machine cut Udaipur green stone flooring over 20mm thick screed bed in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, laid in designed complete all as specified and as directed by Engineer-in-Charge.

M & L for 18 to 20 mm thick Udaipur green marble laid over and including 15mm thick screed bed in CM 1:6 as in tread ,step of stair case in one piece including cutting jointing moulding granite polishing complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete incl seat cover and PVC low level flushing cistern dual type10 ltrs capacity , C P Jet complete all as specified and as directed by Engineer-in-Charge. .Make Parryware (superfine),Hindware,Cera,

Supply and fix in repairs PVC connection pipe of 15X450mm " size with 2 Nos brass check nuts with washers, complete all as specified.Make-Cardin cat part No-SSCP-18 or Equivalent Chilly.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 580mm x 450mm complete including , CP Waste couppling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Make Parryware (superfine),Hindware,Cera,

S&F in repair vitreous china squatting pan of Orisa pattern long pan size 580mm white with for 100 mm bore front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding.complete all as specified Make - Parryware (superfine), Hindware,Cera,

Supply only 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified. Make Parryware (superfine),Hindware,Cera,

S&F CP grating 125mm dia, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing and connections of 15 mm dia of bore complete all as specified .

Taking up or down steel water tubing and connections of 20 mm dia of bore .complete all as specified .

M&L GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down.Make : Jindal

All as per item No 30 above but 20mm bore.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each complete all as specified and as directed by Engineer-in-Charge..

S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in-Charge.

S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 complete all as specified and as directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type) complete all as specified and as directed by Engineer-in-Charge..

S&F 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before).

All as per abovoe item no 39 but except bricks

S&F powder coated aluminum frame for windows/ventilators with one or more rebates including grills, jointing cleats for fixing etc complete all as specified Make of section- JINDAL /INDAL /HINDALCO.

Supplying & Fixing in opening Solid PVC double door frame (Factory made) of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with MS tube, complete all as per specifications and as per drawing on Sl page No 150 of SSR (Part -II). Make-SINTEX /M/S RAJSHRI PLASTIWOOD PVT LTD

S & F factory made solid PVC moulded door shutter 35mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam PVC sheet on back face complete all as specified and directed. Make-Sintex industries Ltd/ M/s Dura plast Extrusion/M/s Polywood, Pune.

S & F factory made solid PVC wire gauged door shutter 35mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail including wire gauge and shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aparature 1mm, wrapped on an additional square 8mm MS solid tube and this tube shalll be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed. Make-Sintex industries Ltd/ M/s Dura plast Extrusion/M/s Polywood, Pune.

Taking down Cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc omplete all as specified and as directed. Engr-in-Charge .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for omplete all as specified and as directed. Engr-in-Charge .

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc omplete all as specified and as directed.Engr-in-Charge .

M&L for cement concrete 1:2:4 type B-I, using 20 mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L for brick work with sub class 'B' brick using old size bricks straight or curved on plan exc 6m mean radius built in CM 1:4 omplete all as specified and as directed.

Excavationany type of soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in in hard dense soil omplete all as specified and as directed.

All as per item No 51 here-in-before but exc 1.50m and n exc 3.00m in depth.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil omplete all as specified and as directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation of manholes omplete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in surfaces channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stoped ends etc omplete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW pipes after they are laid and tested including demolition of old bed and pipes omplete all as specified and as directed. (thickness of concrete bed 100mm).

All as per ser item No 58 here-in-before but for 200mm internal dia Salt glazed stoneware pipes (thickness of concrete bed 150mm).

Supply and laying, jointing 150mm internal dia of salt glazed stoneware pipes grade 'A' incl testing and laid in trenches to a level on concrete bed complete all as specified.

All as per item No.60 here-in-before but 200mm internal dia of salt glazed stoneware pipes grade 'A' .

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. (Water proofing compound shll be measure and paid separatelly).

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement omplete all as specified and as directed. .

Supply only intergral water proofing compound omplete all as specified and as directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150/200mm dia pipes omplete all as specified and as directed.

S & F for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mmx80mm omplete all as specified and as directed. Make : M/s Polycrete or equivalent make as approved.

S & F for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx450mmx50mm factory made (make-polycrete) all as specified and directed by Engineer-in-Charge. Make : M/s Polycrete or equivalent make as approved.

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC Pipes all types top to bottom including junctions etc, Cleaning of sewage line upto GT in the area of DK-II,DK I Ring Road Colony , (Md accn and all types of Accn including multistory bldg ). complete all as specified and as directed.

Cleaning of GTs in the area of DK-I, DK-II and Ring Road Colony , (Md accn and all types of Accn) omplete all as specified and as directed.

Cleaning of Manhole depth of 1.2mtr and any size of MH in the area of DK- I, DK-II and Ring Road Colony ,(Md accn and all types of Accn) and taking out sludge and depositing them to notified area by Municipal Corp of Delhi for dumping or out side defence land omplete all as specified and as directed.

Cleaning of Manhole depth exc 1.2 mtr and above of any size of MH in the area of DK-I, DK-II and Ring Road Colony , (Md accn and all types of Accn) omplete all as specified and as directed.

Cleaning of Sewage line from GT to Ist Manhole in the area of DK-I, DK-II and Ring Road Colony , (Md accn and all types of Accn) omplete all as specified and as directed. Note-cleaning of sewage line daimeter upto 100mm to 150mm

Cleaning of sewage line n.exc 10mtr in length in the area of DK-I, DK-II and Ring Road Colony (Md accn and all types of Accn). complete all as specified and as directed. Note-cleaning of sewage line daimeter upto 100mm to 200mm

Cleaning of Sewage line 0.00mtr to 20.00mtr in length in the area of DK-I, DK-II and Ring Road Colony (Md accn and all types of Accn) omplete all as specified and as directed. (Note :- This item will be measured if length exceed from 10.00mtr.and cleaning of sewage line daimeter upto 100mm to 200mm

Cleaning of Sewage line 0.00mtr to 30.00mtr in length in the area of DK-I, DK-II and Ring Road COlony (Md accn and all types of Accn) complete all as directed and as specified. Note :- This item will be measured if length exceed from 20.00mtr.and cleaning of sewage line daimeter upto 100mm to 200mm

Cleaning of Sewage line 0.00mtr to 50.00mtr and onwards in length in the area of DK-II, Ring Road Colony , (Md accn and all types of Accn) complete all as directed and as specified. (Note :- This item will be measured if length exceed from 30.00mtr.and cleaning of sewage line daimeter upto 100mm to 200mm

Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and disposal off the same out side the defence area notified by Municipal Corporation of Delhi all as directed by Engr-in-Charge.

Mechanically used water fitting Hydraulic pressure machine and water sucking hydraulic pressure machine jet press for cleaning of sewage line shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE. (For Dhaula Kuan Part -II ).

All as per item No. 78 above but in the area of DK I

All as per item No. 78 above but in the area of RR Colony.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

All as per item No. 81 above but bore of pipe in 110 mm.

S&F inrepair PVC (SWR) bends any radius bore 75 mm complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 83 above but bore of pipe in 110 mm.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation and PCC bedding and haunching in below ground level or in floors or fixed to walls with clamps etc, bore of pipe 75mm complete all as specified and directed. Make : NECO (Jayaswal)/HEPCO (Binay Udyog)/Jindal Saw/Hindustan Engineering products.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation and PCC bedding and haunching in below ground level or in floors or fixed to walls with clamps etc, bore of pipe 100mm complete all as specified and directed. Make : NECO (Jayaswal)/HEPCO (Binay Udyog)/Jindal Saw/Hindustan Engineering products.

Supply and fix cast iron Bends (sand cast) (any radius), diminishing pieces or tapers soil/waste pipes 75mm in any length (larger bore measured) complete all as specified and directed.

All as per item No.87 above but 100mm dia

S & F for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 900mmx900mmx80mm omplete all as specified and as directed.

Note :- Total amount of Sch of credit is Rs 48107.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

imran construction company