SPL REPAIR TO JCOs AND ORs QTRS AT FATEH VIHAR 08XJCOs AND 32XORs QTRS AND ADDN/ALTN TO DRAIN AND PATH AT 272 TRANSIT CAMP UNDER GE (W) PATHANKOT

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land.

M&L for Rendering 5mm thick in CM (1:3) on fair faces of ceiling and other RCC surface of any location and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfac

es of walls and finishing even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound.

M&L for preparation of NEW plastered walls surfaces & applying two coats of chemical waterproofing treatment (601 raincoat of pidilite or equivalent) on wall & chajja, terrace & parapet wall, such as Flexcoat, Beckcoat, Exshield etc or equivalent including filling of cracks in walls/concrete with " Crack-X" of pidilite or equivalent complete as per manufactures instructions, all as specified and directed.

M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of chemical waterproofing treatment (601 raincoat of pidilite or equivalent) on wall & chajja, terrace & parapet wall, such as Flexcoat, Beckcoat, Exshield etc or equivalent including filling of cracks in walls/concrete with " Crack-X" of pidilite or equivalent including preperation of OLD surfaces complete as per manufactures instructions, all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with roller over one coat of alkali resistant primer smooth finish.etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coats of oil bound distemper with roller over one coat of alkali resistant primer smooth finish.etc complete all as specified and directed .

M&L for preparation of New plastered surfaces of wall applying 1.5 mm one coat of white cement based wall care putty on wall new surfaces of any description finished even and smooth complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall applying 1.5 mm one coat of white cement based wall care putty on wall old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of two coats of white wash on ceiling .etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash on ceiling surfaceetc complete all as specified and directed .

Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) complete all as specified

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:4) complete all as specified

M&L for except brick work of any discription in CM(1:6) complete all as specified

Demolition of cement concrete unreinforced of any type any level and at any position and removal of the demolished material outside MOD land complete all as specified.

M&L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth with out using extra cement complete all as specified Note : Water proofing compound shall be measured & paid seperately.

M&L for PCC 1:3:6 (using 20mm graded crushed stone aggregate), type C-1, 75mm thick as in plinth protection finished even and smooth using extra cement compete all as specified.

M&L PCC 1:3:6 (using 40mm graded crushed stone aggregate) type C-2, 75mm thick as in sub-base to floor finish finished even and smooth without using extra cement compete all as specified.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping on chajja roof and similar works over RCC roof surface and surface including rounded or chamferred on edges and formwork etc all as specified and directed.

Taking down chowkats without taking off shutters of any type from the frame area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats without taking off shutters of any type from the frame exc.1.50 Sqm and not exc. 4.00 Sqm

Taking down shutters of any description exc. 1.00 Sqm & n.exc 2 sqm and refixing in the same opening complete.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc mixed with approved water proofing compound all as per manufacturer'ss instructions on the roof surface to achieve requisite slope all as specified and directed. (Note : water proiofing compound shall be measured & paid separately)

S&F Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and pepared to receive glass, gauze, etc with sash bar, edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauze etc sizes of members of shutters as specified in SSR part-1 section 8, clause 8.24 (a); all as specified. ISI marked.

S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass 3mm thick and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete as specified and directed.

S&F plain framed pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) all as specified. ISI marked.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F 300mm, mild steel ordinary rait tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

M&L for painting with synthetic enamel paint of two coats over a coat of primer on new wooden surfaces of any description exc. 10 Cm width or girth including prepation of surfaces.

M&L for MS hold fasts size 25x6mm FI fixed to chowkats.

M&L for applying one coats of synthetic enamel paint on old wooden surfacesof any desccription exc. 10cm width or girth incl. preparation of surfaces.

S&F stainless steel butt hinges medium weight 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) cement concrete in bed blocks for hold fasts.

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm

Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing, flooring and similar work laid, bedded and pointed in cement mortar complete.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm size.

M&L for Marble work other than black18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs and like over and including provision of 20mm thick cement mortar (1:4) including pointing in colour cement (1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. .

S&F solid PVC door frame(choukhat) of size 50mmx47mm made out of 5mm plain dark colour PVC sheet reinforced with MS square tube etc complete all as spd and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top& bottom rails. MS frame shall be covered with heat moulded plain dark colour PVC 'C 'Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain dark colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail& bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and joined together with solvent cement, etc fixed to frame complete all as spd and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor of 140mm size

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor of 140mm size

M&L for Providing edge moulding to 18-20mm thick Marble stone of counters vanities etc or similiar. including machine polishing to edge to give high gloss finish etc. complete

S&F in repair PVC flushing cistern 10 ltrs capacity high/low level with inlet, ball valve, float and handle including brackets.

M&L for special treatment for sunken portion of WC's, Bath, toilet, kitchen etc executed in following stages :- Stage 1: Providing 15mm thick plaster in CM 1:3 mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i) Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid. (ii) The above treatment shall be got executed through authorised applicator of manufacturer and necessary authenticated documents on account of above shall also be produced by the contractor.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white complete including seat cover and connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specifiedand directed.

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and complete all as specified and as directed

M&L for cement concrete Type E-2, 1:5:10 using 40 mm graded crushed stone aggregate as in lean concrete complete all as specified and directed

M&L for Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets,, pinning in ends of brackets or erecting stand including fixing of waste pipe and pillar type etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

S&F in repair 15 mm bore cast copper alloy chromium plated fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair waste fitting of 32 mm bore, brass, chromium plated for glazed ware wash basin etc

S&F in repair Angle cock 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

S&F in repairs bib tap two way 15mm bore fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions complete all as specified and directed...

S&F in repairs bib tap 15mm bore fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions complete all as specified and directed...

S&F in repair Angle cock two way 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

S&F in repair 15mm size PVC connection with PTMT nuts 450mm length complete all as speified and directed.

S&F in repair CP brss Tubular towel rail with hook 20 mm dia 600mm long between flanges of fixed with and including chromium plated brass screws and wooden/plastic screws. complete all as specified and directed.

S&F in repair chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.

S&F in repair 32 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 PVC bends including all necessaryfixed complete to walls, ceilings or in floors etc.

S&F in repair for 100 mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Vent Cowl

M&L for PCC 40mm thick type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) in sub flooring complete all as specified and directed..

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not excceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.

Taking up or down 15 mm bore GI tubing from wall, floor, ceiling.

M&L for glazed ceramic jointless coloured tiles in vertical surface 450 x 300 x 7mm set and jointed in neat cement slurry over and including provision of backing layer 10mm thick in CM 1 : 3 complete all as specified and directed.

S&F GI tube medium grade of 15 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc

Taking up or down 20 mm bore GI tubing from wall, floor, ceiling.

Taking down PVC /cast iron soil waste pipe (any size or patterns) moulding all fittings heads, shoes, bends etc. (Measured over all as fixed along the confrce line over fittings and accessories).

S&F in repair for 75 mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 110 mm dia all as specified.

S&F GI tube medium grade of 20 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch piece (Double `Y') equal or unequal with access door.

S&F 75 mm bore PVC (SWR) branch piece (Double `Y') equal or unequal with access door.

S&F 110 mm bore PVC (SWR) Vent Cowl

Dismantling of boarding ,any description and in any position complete all as specified and directed

Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under :-(a) Stainless steel Handle fancy type 100mm size. (b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation.(j) Magnet of suitable size fixed for cabin leafs, drawers Make-Syntex Plasto board and equivalent approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge.

M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed.

S&F continous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed.

S&F 150mm size hasp & staple, aluminium anodised, safety type, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rub

ber ring joints fixed to walls complete all as specified and as directed.

M&L for Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs including dismantling all as specified of 500 ltrs capacity complete all as specified and directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

M&L for post construction anti - termit treatment at points of contract of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per holy by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centere to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.

M&L for post construction anti- termite of soil / concreate under existing floor along the floor and wall junction using chemical emulsion @ 1 liters per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement morter 1:2 to match the existing floor etc complete all as specified and directed.

Demolition of RCC Chajjas, slabs, beams and similar work by chiselling and cutting the reinforcement all as directed.

S&F in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.

S&F Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for Chajja beams, cantilevers etc complete all as specified and directed.

M&L for Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including grills, door, truss, gate, rafters, purlins etc

M&L for Framed work such as grills, gratings,railing etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F TMT bar 10mm dia and over, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed confirmed to Fe 410-0 complete all as specified and directed.

Form work to sides & soffit of roof beams / top beams rough finished surface of concrete complete all as specified.

M&L for 15 to 20mm machine cut kota stone slab in single piece with round nosing with three numbers of serration as in treads of steps for staircase laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing and mirror polishing and including over 15mm thick screed bed or bedding layer in CM1:4 complete all as specified and as directed by Engg-in-charge

Desilting and cleaning of blocked storm water drain/ nallaha and culvert etc by removal of mud, soil, aggregate, debris manually and removal to a distance exc 50m but n.exc 100m and depositing in low lying area, etc complete all as specified and directed.

M&L for 16 to 18mm machine cut kota stone slab as in riser of steps, skirting, dado and pillar, cills and jambs laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishand including over 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed by Engg-in-charge

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engr-in-Charge.

M&L for coloured Machine pressed precast rubber moulding concrete interlocking paver block (red/yellow) shape and size approved by the Engg-in-charge, with 6-8mm white cement layer mixed with pigment and coated with with epoxy coating having glossy finish confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey Cement and no pigment including 50mm thick sand cushioning bed complete all as secified and directed.

M&L for Cement Concrete , 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.

M&L for machine cut kota stone slab flooring 16 - 18mm thick over 20mm cement screed in CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shad of the slab including mirror polishing complete all as specified and as directed by Engg-in-charge