ADDITION ALTERATION AND RENOVATION OF DMSS ROOM TO STAND BY MSC AND OC WITH PROVISION OF ANTISTATIC FLOORING AT 820SU AT AFS BAMRAULI

Amount

Demolition of plain cement concrete in any position including tar felt or HP tiles in cement mortar bedding including mud puska any thickness etc complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding, benching existing roof slab laid to slope as per existing or as directed including finished surface even & fair complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including finishing surfaces even and smooth without using extra cement complete all as specified and directed.

Provision of Roof treatment consisting of the following items and operations :-(a) Cleaning the roof surface from dust / dirt and any other foreign materials and applying a coat of bituminious primer @ 0.30 liters per square meter uniformily after the surfaces fully dried complete all as specified and directed.(b) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (c) M&L for APP based polymeric water proofing membrane minimum weight 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervison including cutting & chasing 100mm x 75mm in the parapet to insert the APP membrane and sealed with and including PCC (1:2:4) type B-0 (Mixed with and including polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer’s specification). Membrane shall be laid with 100mm side/end lap on prepared surfaces as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.

Preparation of new APP based polymeric water proofing membrane surface applying one coat of aluminium paint complete all as specified and directed.

M&L for cutting, chases, pinning in and making good to facings in concrete n.exc 75 mm wide and 65mm depth for tubing in water proofing felt where required and pointing in CM 1:3 and finishing complete in brick walls or concrete complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for including cutting reinforcement as required to facilitate demolition all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M & L for mild steel TMT bars 6 to 8mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L Reinforced cement concrete (nominal mix), in cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in chajjas all as specified and as directed. Note:- Reinforcement as required shall be measured and paid for separately.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed.

S&F in position premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling 600x600mm module consisting of wall angle section 24x24mm and tee section with web height of 38mm and flange 24mm(colour white) (having rotary stiching on all T-section) with suspension system complete all as per TD drg No CWE/BAM/TD-34 sheet No 1/1dated 29 Sep 2016. Note : (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled/Tegular) or equivalent brand of make as specified in Appendix 'B' to particular specification.(ii) Thickness of GI section shall not be less than 3mm and shall be procured from the tile manufacturer. (iii) Section and hanging system shall have galvanizing of minimum 90gram per square meter and of same make of tiles. (iv) Work shall be executed by the manufacturer's authorised vendor.(v) Old false ceiling shall be contractor property and necessary recovery shall be made as per rate specified in schedule of credit.

Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced ) in above ground floors exc 15 cm thickness complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.

M&L for anti static Vinyl flooring 2mm thick fixing with adhesive as per manufacturers instructions over copper strip 0.5mm thick and 75mm width of 1.00mtrx 1.00mtrs grid in concrete floor project to skirting upto 10cm height complete all as specified and as directed.

S&F homogenous vitrified light drak coloured flooring tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but n exc 0.42 Sqm in floor etc, with cement based adhesive , set and adjointed as per manufacture's instruction over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

S&F homogenous vitrified light drak coloured Wall tiles 10mm thick polished area of each tiles exceeding 0.36 Sqm but n exc 0.42 Sqm in wall etc or on vertical surfaces such as skirting, dado and rises to steps etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles fixed over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection surface finish fair and even , complete all as specified and directed.

Taking down chowkats or fromes exc 1.5sqm but not exc 4 sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed .

Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed

S&F factory made prelam PVC internal Door frame of size 100X45mm with a wall thickness of 5mm(+0.25) made out of extruded 5mm (+0.25) thick extruded PVC sheet of density 600Kg/Cum manufactured by an ISO-9001-2008 certified compnay and by jointing with 3 Nos heat bent PVC sheet section. The inside section of minimum size 90x30mm shall be made from prelam colour PVC sheet of 5mm (+0.25) minimum thickness. The inside section will be covered by sticking two long brackets of 15mmx15mm mild steel square tube , the two vertical door frame made of 5mm thick plain colour PVC sheet reinforced with mild steel square tube, the vertical door frame are to be reinforced with (minimum) 40mmx20mm mild steel tube of 19 gauge(minimum) throughout the frame . The door frame shall be fixed to wall using using 8 Nos 100mm long M. S screws through the frame by using and or fasterners.A minium of 04 number of screw to be provided for each vertical member and two number for horizontal member etc complete as per manufacturers specification and as shown on drawing No CWE/BAM/TD-40 Sheet No 1/3 &2/3. Note :-Gap in between frame and wall /lintel shall be filled properly with suitable materials as per manufacturer instruction to avoid cracks after wards. Colour and design shall be as approved by GE.

S&F Aluminium anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed

S&F extruded Aluminium handles fabricated type anodised 150m size complete all as specified and directed

S&F Aluminium alloy, anodised sliding door bolt 300mm long with hasp & staple (bolt type and fixing bolts and slilding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F 150mm aluminium anodised, barrel tower bolts of extruded section all as specified and directed.

M&L for aluminium Door (Powder coated ) single/double leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick, shutter with bottom & middle rail of section 112.5x37x2.5mm and styles & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock of "Godrej or Link 7 lever self closing device with rebate including joints cleat fixing of builders hardware fittings necessary numbers of floor spring with and including partly 5.5mm thick ordinary plain glass and partly 5.5mm thick ACP board including necessary fittings fixuters & aluminium snap beads complete all as specified and as directed.

M&L for aluminium window (Powder coated ) double leaf with anodized aluminium frame sliding including wheel powder coated of section 62.5x37x2.5 mm thick, shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of necessary builders hardware fittings and one glaze shutter with and including 5.5mm thick ordinary plain glass and other wire mesh shutter with necessary fittings fixtures & aluminium snap beads complete all as specified and as directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F 18mm thick celuka PVC sheet minimum 600 Kg/cum density grade 1 quality , one side pre-laminated and other side plain white colour for cup board shutters as per manufacturer instructions complete as per specification and fixed to existing wooden frame with screws including taking down old shutter etc as per specification and including complete fitting as directed by the Engineer-in-charge. Note :-(i) Builder hardware shall be measured and paid seperatly as S & F under respective items of this schedule.(iii) Fabrication and installation of shutter to be carried out by authorised vendor of manufacturer only.(iv) Old shutter including builder hardware shall be contractor property and necessary amount as per schedule of credit shall be deducted from contractor's dues/payment.

Dismantling floor,hearth or wall tiling incl cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed.

M&L for Non skid joint free ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic tiles in vertical surfaces 450x350/7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in CM 1:4 on vertical surface as in backing coat all as specified and directed.

M&L Granite (of any type) slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shede of granite stone including polishing over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:6. complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 & n.exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position after cleaning and repairing etc. complete all as specified and directed.

S & F 500ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Refixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Refixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

M&L Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.

S&F TANGO ( SIZE 58X43.5X82.5 CM cat No 10086 HINDWARE/JAQUAR/ CERA including complete fitting Special ) Vitreous china wash basin, white, flat back, size 580x443.50mm including taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed as in repairs complete all as specified and as directed.

S &F in repairs health faucet, brass, chromium plated with pipe length 1000mm, washers, connections etc. Cat part No F160002 of Hindware JAQUAR/ CERA or Equivalent complete all as specified and as directed.

S&F SLICK (cat part No 20011 Special HINDWARE/JAQUAR/ CERA) Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- plastic water closet seat shall be measured and paid seperetaly under respective items as supply only.

Supply only of plastic water closet seat, black/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair (cat part No F840012 HINDWARE/JAQUAR/ CERA) double bar (Hollow) towel rail 600mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed of bore of pipe 20mm as in repairs complete all as specified and as directed.

Supply only Waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed.

S&F CP Soap Dish (Catlog No F840006 Hindware) HINDWARE/JAQUAR/ CERA complete all as specified and as directed.

S&F grating doom 100mm dia of CP (Minimum weight 60 Gms) HINDWARE/JAQUAR/ CERA complete all as specified and directed

S&F grating doom 125mm dia of CP (Minimum weight 70 Gms)HINDWARE/JAQUAR/ CERA complete all as specified and directed

S & F Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm as in repairs Cat part No F850077 of Hindware or Equivalentcomplete all as specified and as directed.(HINDWARE/JAQUAR/ CERA)

S&F PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.

S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head Cat part No F730011 of Hindware/ JAQUAR/ CERA or Equivalent complete all as specified and directed

S&F in repair 15 mm Bib tap with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head Cat part No F730004of Hindware/ JAQUAR/ CERA or Equivalent complete all as specified and directed

S&F in repair brass Chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union as in repairs Cat part No F160051 of HINDWARE/JAQUAR/ CERA or Equivalent complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm Cat part No F740012 HINDWARE/JAQUAR/ CERA all as specified and as directed.

S&F in reapir Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper complete all as specified and as directed.

S&F in repairs ( SLEEK SMART Size 476X150X300 Specil ) HINDWARE/JAQUAR/ CERA PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe Sleek smart of Hindware or equivalent complete all as specified and directed

Demolition and breaking up drain pipes 100mm dia salt glazed stone ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F of 75 mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and directed

S&F of 110 mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and directed

S & F of 75mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S & F of 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S & F of 110 mm bore PVC (SWR) Vent cowl complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F in repairs 75MM dia PVC Nahani trap, setting and jointing with solvent cement and fixed in Cement concrete type B-1 (1:2:4) complete all as specified and directed

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose of soil complete all as specified and directed.

Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or in floor complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade laid over sand and joint filled with grey cement pigment complete all as specified and directed.

M&L 25mm thick sand cushioning including filling under floor or in foundation incl watering and consolidation incl filling of joints with sand complete all as specified and directed

M&L for cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portation in cm (1:3) or PCC (1:2:4 ) type B-1, exc half brick but n exc. One brick etc complete all as specified and directed.

Demolition of brick work or stone mansonry, built in cement mortar incl all quoins, pillars etc complete all as specified and directed

M&L for brick work with sub-class 'B' old size bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed

M/L for brick work with sub-class 'B' old size bricks, straight or curved on plan of any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement as in ceiling complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 mixed with and including water proofing compound on fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted complete all as specified and as directed.

M&L complete removal of existing treatment of wall and applying two coats of cement base paint over a coat primer complete all as specified and directed complete all as specified and as directed.

M&L preparation of old surfaces by complete removal of existing treatment on ceiling and apply one coats white wash on ceiling complete all as specified and directed

S&F Paper Holder with Cover (Make Hindware Cat No- F840009) complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tounge anodised,with hard drawn steel spring, with overall length of cover plate 140mm complete all as specified and as directed.

S&F plate girder or single stanchions, built up of one beam of ISMB or channel section with flange plates, caps, bases splices angle brackets cleats and other connections complete all as specified and as directed.

M & L for two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth over new steel surfaces etc, complete all as specified and as directed.

Supply & fixing of PVC wall panelling of 5mm thick sheet for panel & inner framework. The strips should have in their centre a grove of 6mm & 1MM depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval between two PVC stops. The PVC strips shall be fixed to the wall using steel screws through the groove in the pvc strip by using PVC fasteners panels are joined through solvent content complete all as specified and as directed.Make: Rajshree/Sintex or equivallent make as specified in Appendix "B" to particular specification.

S&F in repair venetian blind vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall completed all as sspecified & directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around. In layers n. exc 25cm, for hard/ dense soil complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and as directed.

S&F steel work in tubular including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed.

S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections complete all as specified and as directed.

M&L for PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete for post holes complete all as specified and as directed.

Supply only integral water proofing compound.

Taking down carefully the existing aluminium/copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose,fan regulators, lamp holders, call bell, bell pushes any type etc by unscrewing and taken away from site complete and make good the disturbed surface as existing. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

Taking down DBs SPN/TPN of any size , any make from existing position complete all as specified and as directed.

Taking down Submain wiring any type any size from the existing position complete all as specified and as directed.

M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts grade through PVC conduit medium duty (ISI Marked) concealed with accessories such as bends, cross, elbow, tees etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting Modular type switches, sockets, fan regulators etc and inner and outer sheet top cover (ISI marked) including continuous earth wire FR-LS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multistarnded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for the following : Note : Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained.The rate included for suitable sunken metal flush boxes, cover plates, blank plates etc for placing modular fittings etc for one light point/fan/Exhaust fan point controlled by one switch and making good chased surfaces complete all as specified and as directed.

ditto all as per items 112 here in before but for one buzzer point controlled by one bell push 5Amps

ditto all as per items 112 here in before but for one three pin socket out let 5 amps on independent board complete.

ditto all as per items 112 here in before but for one three pin socket outlet on same board complete.

ditto all as specified in item No.112 herein before but with 4 sq mm PVC insulated an PVC unsheathed cable for 3 pin 15 Amps power point on independent Board 4 Sq mm copper PVC unsheathed as earth wire all as directed.

Supply and fix modular switch single pole one way 6A, 230 Volts complete all as specified and as directed.

Supply and fix ceiling rose surface type 3 terminals 65x20mm complete all as specified and as directed.

Supply and fix modular socket outlet 2 in 1, 2/3 pin, 5 Amps, 2 modules complete all as specified and as directed.

Supply and fix call bell, ding dong type and connection complete all as specified and as directed.

Supply and fix bell push switch modular type 5 Amp SP one way complete all as specified and as directed..

Supply and fix modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix modular switch single pole one way 16 Amp 230 volt, 1 module complete all as specified and as directed.

Supply and fix modular type fan regulator electronic Step type, 240 volts, 120 watts, 2 module complete all as specified and as directed.

Supply and fixing Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including 5 watt LED bulb complete all as specified and as directed.

Supply and fix A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired of Make : North West / Anchor / Legrand complete as specified after taking out old unserviceable starter unit all as directed.

Supply and fix SPN 240V 40-63 Amp Amps capacity 'C' series complete all as specified and as directed.

Supply and fix MCB, SP 06 to 32 Amps 240 volt 10 KA "c" series complete all as specified and as directed.

Supply and fix MCB DB 12 way 220 volt 50 Htz made sheet metal enclosure comprising neutral link, earth link din rail, double door IP-54 protection complete all as specified and as directed.

S& F factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting MCCBs/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts complete all as specified and as directed. Note :- MCBs and MCCB shall be measured and paid for separately under respective item of this schedule.

S &F MCCB 125 amp capacity, four pole, 415 volts, 25 KA complete all as specified and directed.

M&L for Sub main wiring with two run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Sub main wiring with two run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 10 sqmm FRLS, 1100 Volts grade cable drawn into concealed PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 10 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply and fix recess mounted 1x4 feet 36 watt ,6500 k LED luminaries with high transmitive diffuser suitable for indoor spaces glare free soft illumination with powder coated CRCA housing 220 volt 50 Htz Philips cat part No-RC380B LED36S-6500 or equivelent Bajaj &CG

Supply and fix recess mounted 2x2 feet 6500 K LED luminaries with high transmitive diffuser suitable for indoor spaces glare free soft illumination with powder coated CRCA housing 220 volt 50 Htz Philips cat part No-RC380B LED 42S -6500K or equivalent Bajaj/Havells

Supply and fix surface mounted round LED down lighter with dome shape opal diffuser suitable for indoor application 18 watt 220 volt 50 Htz Bajaj cat part No-BGCML 18 W WH or equivalent make as specified in Appendix B to particular Specification.

Supply and fixing matalic body exhaust fan electric driven single phase AC 220 Volts 50 HZ supply heavy duty of size 300mm sweep , 900 RPM with louvers and connecting with 3 core flexible copper conductor cable incl making hole, plastering, grouting nuts,bolts etcand making good the disturbed surfaces .

Supply and fixing in replacement of existing defective energy efficient tube light fitting of 18/14 Watt with LED fitting of 10 watt integral sleek extruded polycarbonate LED channel with white acrylic cover wall mounted type complete with 10 watt LED tube all as specified and as directed Make : Philips cat part No-BN021 LED 10S-6500 PSU GR S1 equivelent model of CG/ Havell's.

Supply and fixing and connecting LED Building security light fittings of 25 watt 6000K new generation energy saving and environmentl friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver complete with including GI Bracket made of GI pipe light grade of size 40mm dia in appropriate length all as specified and directed by Engr-in-Charge. MakeHavells cat part No-Endura Pearl SL25W LED or equivalent Philips/Bajaj

Taking down Air conditionar from the wall, disconnecting electrical connection and copper tubing, taking to workshop for servicing, cleaning overhauling and refixing the same or the other places , including refiling required refrigerent complete all as specified and as directed.

M & L for Earthing complete with Copper earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 20x3 copper strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 25 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth copper strip and GI pipe for protection of earth strip. Any varriation in quantity shall be adjusted.

Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8 mm dia 25mm long hexagonal head screw complete all as specified and as directed.

Supply and fix copper strip 20x3 mm on epoxy based insulator duly fixed with suitable size nuts and bolts on wall complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

M/s M A Traders

M/S Amar Enterprises

R.K.ASSOCIATES

M/S MALHOTRA ENGINEERING WORKS

DEORA ELECTRIC WORKS

chauhan construction

M/s DHARAM VIR GHAI