Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹22.9 L+₹1.2 L (5.51%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹23.7 L+₹2.0 L (9.04%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹24.6 L+₹2.9 L (13.3%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
10 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS AMRITSAR
CERTAIN REPAIR TO OFFRS MESSES, 54 BDE HQ, STN HQ SIGNAL COY AND BDE CAMP UNDER AGE B/R-I AT NAMS
2022_MES_537936_1
GE NAMS-20/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
CLASS D CATEGORY a(i)
7 documents required · 7 mandatory
₹500
GE NAMS
₹60,000
Yes
23 Sept 2022
14 Jul 2022
12 Aug 2022
14 Jul 2022
10 Aug 2022
28 Jul 2022
60 days
Amount
M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture incl taking down old frame of any type and making good to disturbed surface with cementconcrete 1:2:4 or cement mortar 1:4 complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S & F factory made 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as required and make finish good to the existing surface complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturer's instruction including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified all as specified and directed.
S&F Aluminium anodised powder coating any colour minimum coating 50 micron windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame and shutter of fixing with handles, tower bolts, rubber gasket and maruti lock , incl taking down old frame of any type and making good to disturbed surface with cement concrete 1:2:4 or cement mortar 1:4 complete all as specified and directed Note :- Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately.
M&L for anodised aluminium powder coated door shutters, aluminium section weighting 0.55kg/m , incl necessary ,5 mm thick, black tinted glass panes with nano coating & glazing or PVC sheet joining with cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, handles, lock , 2 x aluminium handles 150mm, 3 x hinges , 2 x Aluminium tower bolts 150mm with each shutter of any type including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified and directed
S & F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary ,5 mm thick, black tinted glass panes with nano coating & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified and directed
S&F,5 mm thick, black tinted glass panes with nano coating fixed to aluminium doors/windows/vents with necessary rubber gaskets duly with complete all as specified and directed.
M&L for providing and fixing fully glazed 10mm thick entance tuoghining glass door comprising of one leaf glass shutter of size 1080mm width and height 2100mm gully glazed with necessary handle , etching ,mpivot arrangement fixed to aluminium doors with aluminum beading and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified. (a) All the small works such as cuttings raking making holes pinning insertion etc making good to disturbed portion as per site requirements/ users / given by the Engineer-in-Chrage shall be included in unit quoted rates .(b) All itching work in glass as directed Engineer-in-Chrage shall be included in unit quoted rates. (c) All Glass door shall be water tight with magnets water seal/as directed Engineer-in-Chrage shall be included in unit quoted rates.
M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintel hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.
S&F for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads complete all as specified and directed.
S &F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.
S & F Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as specified and directed by Engr-in-charge.
S & F in repair Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. complete all as specified and directed by Engr-in-charge.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repairs 18/19 mm thick prelaminated Particle board exterior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber/steel frame work as in cup board shutters/ shelves including 02 Nos 100mm aluminium handles, 01 No. 100mm hasp and staples including 6mm thick external teak wood lipping fixed to 18/19mm thick with nails and continous (piano) hinges mild steel brigh finish or electrogalvanised wide of flap 40mm complete all as specified and directed.
S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.
S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.
M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) but except bricks complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed.
Taking down cement plaster on brick/stone/concrete walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items
M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and directed.
M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.
Supply only, integral water proofing compound. complete @ 3 % by weight cement roof and parapet/ vertical surfaces and like complete all as specified and directed.
Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, slab , RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any situation floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of weather proof emulsion paint to match with existing surfaces complete all as specified and directed.
M&L for one layer of compound of altek/birla putty 3 mm thick on old scraped surfaces or new plastered surfaces and obtain smooth finish using sand paper complete all as specified and directed.
M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.
M&L for two coat of weather proof exterior emulsion paint incl preparation of new plastered wall surface complete all as specified and directed. Note : Colour and make as approved by GE
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.
M&L in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site with fixed on wooden grain prelam PVC sheet in lieu of plain colour on PVC frame as per specifications complete all as specified and directed
M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed
M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed
M&L for Green/white/black marble of thickness 17-20 mm thick in slab laid over 15mm thick screed bed in cement mortar 1:6 as in floor, steps, riser & treads and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises and rounding to edges of stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge.. etc complete all as specified and directed. Note-size of slab will be decided by Engr-in-Charge.
M&L for Granite 15-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. to the entire of the premises etc complete all as specified and directed.
M & L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of CM 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing and rubbish off the primises etc complete all as specified and directed.
M&L for Machine cut cudappah stone slab 20-25mm thick for coooking platform over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the premises etc complete all as specified and directed.
M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the premises etc complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick vertical tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc laid over 10mm thick backing coat in CM 1:4 in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubish off the premises etc complete all as specified and directed.
M&L of coloured Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick as in vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
M&L vitrified ceremic tiles 8 to 10 mm thick, in DARK SHADE, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling / demolition , coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.
M&L for Vitrified ceramic tiles 8 to 10mm thick DARK SHADE,(square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match incl dismantling / demolition , Coloured on incl plaster (backing coat) 1:4 CM 10mm thick
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 complete all as specified and directed.
M&L for heavy duty, exterior grade vitrified tiles (Durastone of Somany/EnduMR of johnson or equivalent as approved by GE) of size 300 x300x 10mm thick, as in skirting/dado, risers and vertical surfaces, set,jointed and pointed in neat cement slurry with white cement and pigment over and including screed bed or bedding layer of 10mm thick cement mortar (1:4) complete all as specified and directed.
M&L for heavy duty, exterior grade vitrified tiles (Durastone of Somany/EnduMR of johnson or equivalent as approved by GE) of size 300 x300x 10mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed.
M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand mortar 1:4, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed.
M&L for 50mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement incl dismantling / demolition and rubbish off the premises etc complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 100 mtrs where directed complete all as specified and directed.
M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making good in CM 1:3 incl taking down old pipe complete all as specified and directed.
S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing making good to facing for concealed water tubing etc. cutting exeeding 10cm but not exeeding 20 cm girth on brick masonry in wall, floor or ceiling and making good in CM 1:3 incl taking down old pipe complete all as specified and directed.
S&F 500 ltr capacity rotational moulded polyetheylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR part-I incl 20mm bore ball valve PVC high pressure with palyethylene float and flynut incl taking down/dismantling of old pvc tank complete all as specified and directed. Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over
S&F 1000 ltr capacity rotational moulded polyetheylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR part-I incl 20mm bore ball valve PVC high pressure with palyethylene float and flynut incl taking down/dismantling of old pvc tank complete all as specified and directed.
Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M & L for 40 mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,haunching, sub base floor complete all as specified and directed.
M&L for water proofing treatment to non-accessible /accessible roof slabs by applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of actetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete all as specified and as directed. Note :- To be executed only the person authorised by company of particular kame and under the futelage of company
M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:3) over 25 mm thick screed bed in cement morter 1:4 and flush pointing as work proceed complete all as specified and directed.
ditto above -74- but except bricks tiles complete all as specified and directed.
S& F, in repair vitreous china urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as specified and directed by Engr-in-charge.
S & F in repair vitreous china ware oval counter oval wash hand basin, any colour, size 570 x 450 mm size including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling all as specified and approved by Engr-in-Charge.
S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or creating stand fixed complete all as specified and directed.
S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest , including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cistern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.
S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as specified and directed by Engr-in-charge.
S&F in repair 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.
S&F, in repair, vitreous china size of 370x545x370 rimiless wall hang WC with UF soft close seat cover , hinges accessories set as per cat Part No DRS WHT 37951 (including fixing bolts but excluding flushing cistern and flush pipe) Make Jaquar ,Cera ,& Parryware complete all as specified and directed.
S&F in repair concealled flush valve complete with 32mm size control cock 200mm long operating lever complete all as spcified and directed.
S&F, in repair, single piece slim concelaed flusing cistern, with wall mounted frame installation kit and S type drain pipe connection set for wall hung WC with flush control plate) complete all as specified and directed.
S&F in repair 15mm bore pillar cock chromium plated screwed down high pressure complete all as specified and directed
S&F in repair anlge cock chromium plated scrwed down high pressure with capstan head screwed for iron pipe 15mm bore complete all as specified and directed
S&F in repair central hole basin mixer with regular spout without pop up waste system with 450 mm long braided hoses complete all as specified and directed
S&F, in repair, vitreous china full pedestal wall hung basin white with fixing accessories of size 610 mmx 480mm X 1950mm , counter top basin, grouted in cement mortar 1:2 complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
Supply & fixing 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair, overhead shower 150mm x 150mm square shape single flow (ABS body chrome plated with gray face plate ) incl shower arm 190mm long with rubit cleaning system complete all as specified and directed.
S&F in repairs, hand shower sizes 65x95mm rectangular shape singel flow with rubite cleaning system face plate stainless steel and ABS body in chrome finished ) with 1.5 meter long flexible tube with nut and premium wall braket for hand shower 35mm dia and 100mm long round shape complete all as specified and directed.
S&F in repairs, brass chromium plated single lever wall mixer 3 in 1 system with provision of both over head shower and hand shower with 115 mm long bend pipe connecting legs and wall flange (wihout hand and over head shower complete all as specifed and directed.
S&F, in repairs, brass, chromium plated tubular towel rail 20mm dia 60cm long between flanges complete all as specified and directed.
S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.
S&F in repair Towel ring round with round flange complete all as specified and directed
S&F, in repair, CP, soap dish holder complete all as specified and directed.
S&F, in repair, glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed.
S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed.
S&F, in repair wash basin table top, size (175x440x420mm or 135x420x420mm ) w/o overflow / complete all as specified and directed.
S&F in repair 15mm bore bib tap chromium plated screwed down high pressure complete all as specified and directed
S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or butterfly handle screwed down to iron pipe with all fittings complete all as specified and directed.
S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed.
S&F, in repair, concealed angular stop cock, size 15mm bore complete all as specified.
S & F in repairs 15 mm bore dia fancy type chromium plated long shank and cup stop valves (Concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S& F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed.
S&F in repairs chromium plated Urinal spreader for fixing with 15 mm dia bore pipe complete all as specified and directed by Engr-in-charge.
S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed
S&F in repairs 22 mm dia powder coated MS pipe as in curtain rod with decorative brackets , knobs etc complete all as specified and directed.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.
S&F PVC (SWR) plain bend any radius for 75 mm bore complete all as specified and directed.
S&F PVC (SWR) plain bend any radius for 110mm bore complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S&F, 75mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) branch piece, single(Single Y) equal or unequal with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook complete all as specified and directed.
S & F steel work in tubular trusses and tubular posts including special shaped washers, chequered plate, angles etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and directed.
S&F in repair 2mm thick fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc incl dismantling complete all as specifeid and directed.
S&F in repair for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.
S&F false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 38' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction.
M&L of 25mm plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course complete all as specified and directed.
M & L for applying two coat of undiluted thick coat of acrylic reinforcement liquid applied elastormeric water proofing membrane with UV resistance properties and solar efective properties over one coat of primer (1:3, Dilution:water) Note: Each coat gap between 6 hrs) complete all as specified and directed.
S&F ornamental stainless steel tubular pipes/sheets, pieces such as pipe caps globe at top 18 guage and grade 304 as in staircase railing including welding , moulding riveting nut and bolt with all necessary fitting complete as shown directed by Engineer-in-Charge
S&F, swiel mirror 500 round Complete all as specified and directed.
S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.
S&F, in repair, single action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed.
S&F in repair tank connector 20 mm bore complete all as specified and directed.
Mechanized cleaning and disinfection of Water Storage Tank : 1. Mechanized Dewatering of water storage tank. 2.Removal of sludge laying on the bottom of water storage tank through special sludge pumps. 3.Cleaning of internal walls of water storage tank through High Pressure rotary Jets 4.Vaccum cleaning of the floor of water storage tank through industrial vaccum cleaners. 5.Spray of H2 O2 inside the tanks as an antibacterial agent. 6. UV radiation of the tank. 7. Spray of bleaching powder in prescribed quantity after final cleaning of the tank.
(a) 500 ltr capacity
(b)1000 ltr capacity
S&F Mortice lock,vertical type, size 100 mm door lock 4 liver brass complete all as specified and directed.
S&F Mortice lock,vertical type, size 100 mm door lock 4 liver brass complete all as specified and directed.
S&F in repair 110 mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F, in repair, Sink Cock (Table Mounted) with angular Knob, of 15mm bore complete all as specified and directed.
S&F, in repair, 32mm bore, low density polyethlene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.
Petty repair to existing built in steel cup board, door ,window and ventilator locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys.
Fixing only in repairs loosed wooden pelmet boxes in position by using plug/wooden gutties embedded in wall make good in CM 1:3 fixed with MS holder clips complete incl tightening of screws etc in all respect length of each pelmet n exc 2.5Mtr all as specified and directed by Engr-in-charge.
Refixing of shutter including taking down easening and adjusting and also refixing handware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm each in same opening all as specified and directed
Refixing of shutter including taking down easening and adjusting and also refixing handware as required including renewal of unservicebale screws etc of any description exc 1.0 sqm but n exc 2.0 sqm each in same opening all as specified and directed
Taking down aluminium door shutter of any sizes including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.
S&F, in repairs, 18mm thick, PVC sheet one side prelaminated of approved texture as in Kitchen cabinet complete all as specified and directed. (Note:- Each member i.e. shelf, partition & shutter of kitchen cabinet shall be measured and paid separately)
S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size.
S&F, in repair, for 5 mm thick ACP Aluminium composite panel board prelaminated both sides with decorative choice laminations and fixed with screws to aluminium frame work complete all as specified and directed.
Supply only plastic water closet seat, Black/white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
M&L, in repair, 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.
S&F in repair, PVC nahani trap, 75/100mm dia with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), dia of outlet 100mm complete all as specified and directed.
M&L, in repair,PVC (SWR) gully trap , square or round mounted, any type of size 125 x 100mm, setting and jointing with ting and jointing with solvent cement cement (1:1) complete all as specified and directed.
M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed.
M&L for 15mm thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately)
M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg sqm per coat. Including polythene film, black , 50 micron laid in floors. all as specified and directed. ( Note:- WPC measured separately)
S&F GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as sunken spout all as specified and directed
M&L cement concrete 1:1.5:3 type A-0 using 12.5 mm graded stone aggregate as in roof kerbs PCC as in kerbs/cover fillet complete all as specified and directed.
M&L cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as complete all as specified and directed.
M&L for mirror polishing for old kota stone complete all as specified and directed by Engr-in-charge
M&L for 1mm thick wood grain printed PVC sheet used sheet fixed both side or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified & directed.
S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms)
M/s Vijay Construction Co.
tarlok singh contractor
Mahajan Builder
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .