Interior works of VC Residence at National Law University, Amingaon, Guwahati-31

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or More Coats on old work.

Providing making and finishing of 70.5mm thick full height, laminated partition/wall panelling to be made with 50x50 mm sal wood frame structure for 600mmc/c in both ways and fixing of 19m on over salwood frame structure and fixed supported from existing rcc slab with fixed ,passing and finishing of 1.50mm thick decorative laminated sheets on over existing ply surface in both ways as per required shade of the laminated sheet the work complete with all necessary hardware matterials like nails,fevicol,screws abro tape etc. and making labour as per directed by the concern department.

Providing erecting cutting and fixing of 420mm depth free standing kitchen Cabinet with laminated finished erecting/making to be made with 19mm thick Greenply on all frame structure and required artition with self member as per required height with providing fixing of edge binding in all pltwood edges cutting and pasting with fixing for 1.5 mm thick decorative laminated sheet in both of ply surface including all hardware fittings like nails,fevicol,pesting tap, handle, lock,hinges,lower bolt,magente catcher etc.as a complete with all necessary required materials and labour as directed by the concern department.

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked :