Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC PLOT NO 59 60 WAZIDPUR JAIMAU KANPUR 208010 | KANPUR NAGAR | UTTAR PRADESH | 208010 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹20.8 L+₹85,014 (4.27%)Rejected-Finance RZ 382 3RD FLOOR GALI NO 11B KAILASH PURI EXTN PALAM COLONY PALAM VILLAGE NEW DELHI 110045 | SOUTH WEST | DELHI | 110045 | L2 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹19.1 L
EMD Value
₹38,200
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT 10
GE WEST DELHI CANTT 10
PROVISION OF CERTAIN SANCTIONED WORK OF AGE BR III UNDER GE WEST DELHI CANTT 10
2022_MES_545592_2
GE/DW-68/2022-23
Open Tender
Civil Works
Item Rate
90 days
DELHI CANTT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE WEST DELHI CANTT
₹38,200
11 Nov 2022
17 Sept 2022
5 Oct 2022
17 Sept 2022
3 Oct 2022
20 Sept 2022
Amount
Excavation in trenches in soft/loose soil not exc 1.5m wide and not exc 1.5m deep complete all as specified.
Returning filling in, including spreading leveling, watering and well ramming in layers n. exc. 15 cm in soft/loose soil, complete all as specified and directed.
Removing of excavated soil up to a distance not exceeding and depositing where directed at a level not exceeding 1.5 M above the starting point or out of MOD land complete all as specified and directed.
Earth filling under floors or in foundation including watering and consolidation well ramming including sporeading and levelling n.exc 25cm thick complete all as specified and directed. Note : Earth to be filled shall be obtained from item No. 1.00 above.
M & L for Anti Termite Treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and as directed.
M & L for Anti Termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M & L for Anti Termite Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M & L for Anti Termite Treating the soil alongwith external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
M&L for cement conc 1:3:6 type C-2 using 40mm graded stone agg as in sub base to floor/ filling mass conc.complete all as specified and as directed.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L for 15 mm thick rendering in CM ( 1:6 ) on fair faces of brick work or concrete surfaces finished surface even and fair without using extra cement complete all as specified and directed.
M&L for applying two coats of oil bound distemper (approved quality & tint) using painting rollers over a coat of alkali resistance primer including wall care putty not more than 1 mm on walls on prepared surfaces under items here-in-before complete all as specified and directed.
M&L rendering 15 mm thick plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces finished fair and even complete all as specified and directed.
M&L for prepration of new platered surfaces and applying two coats of 1st quality weather proof exterior acrylic emulsion over and including not more than 1mm thick exterior grade wall care putty and a coat of extesior primer of same manufacturerr on wall complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling and finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
S&F powder coated anodised aluminium frame for windows, ventilators, grill with one or more rebates including necessary joining cleat, powder coated aluminium snap beading, screws for fixing etc. complete all as spd & directed. Note: (1) Only aluminium items to be measured. (2) Minimum thickness of powder coating to be 50 micron.
S&F aluminium anodised powder coated sliding window comprising of sliding runner of two/three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of two sliding shutters and one wire mesh shutter made out of section (weight not less than 0.55 Kg/RM) with 4mm thick glass fixed with rubber and aluminium beading including down push type locking arrangement in glass shutter, fixed the frame with rawl plug complete all as specified and directed. Note :- (1) Glass, wiremesh to be measured & paid separately. (2) Minimum thickness of powder coating to be 50 micron.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed.
S&F 4mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed.
S & F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. .
S & F factory made 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one shop coat of pink primer all as specified and directed.
S & F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed.
S & F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified & directed.
S & F aluminum anodised handle 150 mm long cast type complete all as specified & directed.
S & F door stopper of aluminium alloy body and tongue, anodised, fixed in bottom of shutter complete all as specified and directed.
M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site complete all as specified and directed.
S & F 300mm long aluminum, anodized barrel sliding bolts of extruded section complete all as specified & directed.
M & L for reinforced cement concrete nominal mix type B-1 1:2:4 (using 20mm graded stone aggregate) as in foundations, inlcuding rafts, footings, foundation beams etc complete all as specified and directed.
M&L for nominal mix type A-1 1:1.5:3 (using 20mm graded stone aggregate) as in columns and the like complete all as specified and directed.
M&L for nominal mix type A-1 1:1.5:3 design mix M-25 (using 20mm graded stone aggregate) as in slabs supported on walls and beams, roof slabs landings, balconies canopies, deck slabs and the like including connected beams complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.
S&F TMT bars 6mm to 8mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.
All as per Srl item No.33 here-in-before above but TMT bars 6mm and over upto and including 8mm as in stirrups, spacers and binders.
Use and waste form work to soffits of suspended slab such as roof slabs, balconies, floor slabs, cover slab, shelves, landings and similar work including beams, not exc. 200mm thickness finished rough (horizontal or sloping) as specified and directed.
Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions and the like complete all as specifed and directed.
Use and waste form work to sides & soffits of floor or roof beams, haunchings, griders bressummers lintels, cantilevers shelves including sup-ports, overhangs, etc also splays between floors and beams etc, complete all as specified and directed.
Use and waste formwork to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide rough finished surfaces complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement complete all as spd & directed. (Rate of WPC shall be included in unit rate)
M&L for applying water proofing treatment as following:- (a) 15mm cement plaster with cement mortar 1:4 on roof surfaces (b) A coat of bitumen primer @ 0.40 Kg/Sqm on prepared surface of plaster and applying a coat of bitumen 85/25 grade @1.2kg/Sqm (c) Applying APP based polymeric membrane minimum weight 3.50 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric/wt not less than 150 gm/Sqm and sealing joints by torched application bitumen.
M & L for PCC tiles of size 250mm x 250mm x 22mm thick with grey cement and no pigment, set and jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel painting over a coat of red oxide primer etc all as specified and directed.
M & L for preparation of new or previously untreated wood or wood based surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (approved tint) over a coat of pink primer complete as specified and directed.
M & L for 100mm thick Plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate as in sub base all as specified and directed.
Demolition of PCC in ground floors and pavings not exc 15 cm thicknes (below or abvoe ground level) including removal of rubbish beyond MOD land complete as specified and directed.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including removal of rubbish beyond MOD land complete as specified and directed.
M& L 40 mm thick cement concrete type B-2 (1:2:4) (40mm graded aggregate) in sub base complete as specified and directed.
M & L for Vitrified tiles (any shade) 9 mm to 10mm thick (square/rectangular) polished, area of each tile (600mmx600mm) , in floors/Skirting etc set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick CM (1:4) screed bed or backing coat complete all as specified and directed.
M & L for Vitrified tiles 10mm thick tile area of each tile exc 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed over & including 20mm cement screed in (1:4) and neat cement slurry and pointed in white or coloured cement grout to match complete as specified and directed.
M & L for non skid ceramic tiles 7 to 8mm thick tile area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc, set and jointed over and including 20mm cement screed in (1:4) and neat cement slurry and pointed in white or coloured cement grout to match complete as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 300X200X7 mm thick set over and including 10 mm backing coat in cm (1:4) & jointed in neat cement slurry and pointed in white or colour cement to match complete as specified and directed.
S&F sheet glass shelf assembly consisiting of sheet glass shelf with chromium plated bracket guard and railing. Make:- CERA catpart No:- F5005101. jaquar catpart no :- CAN-CHR-1171N, Hindware catpart No:-F880010CP.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F in repair flushing cistern 10ltr capacity syphonic action type low clevel with inlet ball valve ,float valve and handle including bracket,flushing pipe etc. complete all as directed.
S&F in repair chromium plated brass overhead shower rose 125mm dia, with revolving joint fixed to 15mm pipe, complete all as specified and directed.
S&F in repairs 15 mm bore angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified.
S&F in repairs chromium plated soap dish complete all as specified and directed.
S&F in repairs chromium plated jet spray including connection pipe complete all as specified and directed.
S&F CPVC pipe 20mm outer dia with all brass fifittings fitted with CPVC pipe like brass elbow, brass T, brass male/female socket etc. and fixed complete to walls ceilings or laid in floors of medium grade including taking down old GI pipes complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:4 including dismantling of floor or hearth tiling and rubbish off the premises beyond MOD land complete all as specified and directed.
M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) 7hick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:4 rough to receive tiles. including dismantling of wall tiling and rubbish off the premises beyond MOD land complete all as specified and directed.
M&L for concealed point wiring with PVC FRLS insulated multi stranded unsheathed cable 1.5 sqmm size with stranded copper conductor, 1100 volts grade conforming to IS-: 694 drawn in and including concealed PVC rigid conduits 20 mm dia incl cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed with concealed sunk in pressed steel terminal boxes of 1.6mm thick factory made and painted with stove enameled black paint covered with 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-
(a) One light/fan/bell point controlled by one way switch 5 amps.
(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.
All as per item No. 54 (a) here in before but with 2x2.5 Sqmm and 1x 1.5 sqmm cable for earth connection for one 3 pin socket outlet 15 amps independent board complete all as specified and directed
S&F of switch pian type 5 amps single pole one way complete all as specified and directed.
S&F of switch piano type 15 amps single pole one way complete all as specified and directed.
S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.
S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.
S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.
S & F of BLDC ceiling fans complete with Remote and accessories 230 V,1200 mm sweep BEE 5 Star rated complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and directed.
S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.
S&F basic all purpose surface and wall mounted LED batten with Aluminium housing & integrated electric driver 20 watt LED tube light fitting of 4 ft length connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed.
S&F new generation energy saving and environmental friendly long life versatile pressure die cast alumonium IP-65 road way luminaire with high power 35 watt LED security light complete all as specified and directed.
S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
S&F single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.
Deduct Credit: for demolished/dismantled material of (-) Rs 8400.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .