Renovation work for NBCC Corporate office including Retro-fitting ,MEP services and Interior Works at Lodhi Road, New Delhi - 110003

New Delhi, 110003

Location Lodhi Road, New Delhi, 110003

S No. Description of Item

DSR Non-DSR Total

A PART A (Retrofitting, Pre-fabricated Structure & Lift Work)

2 Pre-fabricated works 1,05,45,345 1,05,45,345

B PART B (C&I, Plumbing, Fire fighting, Electrical HVAC,LV & Furniture etc.)

1 Civil Finishing & Interior Works 1,67,71,283 6,10,49,257 7,78,20,540

3 Fire Fighting Works 30,22,497 4,22,525 34,45,022

6 Lighting Works 45,59,700 45,59,700

8 Modular Furniture 3,78,56,049 3,78,56,049

9 Loose Furniture 1,40,54,538 1,40,54,538

Grand Total of Part A+ Part B 3,73,84,582 20,44,38,241 24,18,22,823

Grand Total of Part A+ Part B 3,73,84,582 20,44,38,241 24,18,22,823

Digitally signed by ANUJ

NBCC (INDIA) LTD

(A GOVT. OF INDIA ENTERPRISE)

NBCC Bhawan, Lodhi Road New Delhi 110 003

Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SI No. Description of Item DSR Non-DSR Total

PART A (Retrofitting, Pre-fabricated Structure & Lift Work)

2 Pre-fabricated Structure Works 1,05,45,345 1,05,45,345

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SUMMARY OF Retro-fitting works

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

SI No. Description of Item Unit QTY Rate DSR Rate NDSR AMOUNT DSR AMOUNT NDSR

1 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm. 282.00 927.25 2,61,484.50

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm. 10.00 736.40 7,364.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm. 25.00 961.30 24,032.50

Extra for additional height in centering, shuttering where ever required

with adequate bracing propping etc. Including cost of de-shuttering and

decentering at all levels, over a height of 3.5mter for every additional

height of 1 meter or part theireof (plan area to be measured)

Suspended floors, roofs, landings, balconies and access platform (Plan area

to be measured)

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 6036.00 107.85 6,50,982.60

Providing and laying in position ready mixed or site batched design mix

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing, carriage

3 5.33 for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following

grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in

design mix shall be payable separately. In case the cement content in

design mix is more than 1.10 times of the specified minimum cement

content, the contractor shall have discretion to either re-design the mix or

bear the cost of extra cement.

3.1 5.33.1 All works upto plinth level

5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 41.00 9655.70 3,95,883.70

Demolishing mud phaska/ Brick bat coba in terracing and disposal of

material within 50 metres lead

Demolishing R.C.C. work manually/ by mechanical means including

5 15.3 stacking of steel bars and disposal of unserviceable material within 50 Cum 77.00 3551.25 2,73,446.25

metres lead as per direction of Engineer - in- charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled

or waste materials by mechanical means, including loading, transporting,

6 15.60 unloading to approved municipal dumping ground or as approved by Cum 261.00 263.95 68,890.95

Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts

Demolishing brick work manually/ by mechanical means including

7 15.7 stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 22.00 2060.20 45,324.40

Providing and fixing Scaffolding net of required width made of high

density Polyethylene UV stabilized knitted on warp knitting machines

having density 100grams/sqm and shading coefficient minimum 75%

around the construction site/ for vertical extension as per requirement

including fastening/tying with building/scaffolding pipes or with any

other fixtures etc. complete as per direction of Engineer-in-Charge. (One

time payment shall be made for providing Scaffolding net from start of

work till completion of work including shifting if any. The Scaffolding net

shall be the property of the contractor on completion of the work)

Note: The item shall be payable only to execute DSR Items. To execute DSR

items scaffolding/enabling works are considered to be included within the

cost of respective items.

Chipping of unsound/weak concrete material from slabs, beams, columns

etc. with manual Chisel and/ or by standard power driven percussion type

or of approved make including tapering of all edges, making square

shoulders of cavities including cleaning the exposed concrete surface and

reinforcement with wire brushes etc. and disposal of debris for all lead and

lifts all complete as per direction of Engineer-In-Charge

26.28.2 50mm average thickness Sqm 45.00 256.35 11,535.75

26.28.3 25 mm average thickness Sqm 2396.00 126.75 3,03,693.00

Providing, mixing and applying bonding coat of approved adhesive on

10 26.31 chipped portion of RCC as per specifications and direction of Engineer-In-

charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @

26.31.1 2.2 kg cement per sqm of surface area mixed with specified proportion of Sqm 45.00 141.20 6,354.00

approved polymer

26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make Sqm. 2396.00 285.20 6,83,339.20

Digitally signed by ANUJ

SUMMARY OF Retro-fitting works

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

SI No. Description of Item Unit QTY Rate DSR Rate NDSR AMOUNT DSR AMOUNT NDSR

Providing and injecting approved grout in proportion recommended by

the manufacturer into cracks/honey-comb area of concrete/masonry by

11 26.35 suitable gun/pump at required pressure including cutting of nipples after

curing etc. complete as per directions of Engineer-in-Charge. (The payment

shall be made on the basis of actual weight of approved grout injected.)

Stirrer mixed SBR Polymer (of approved make) modified Cement slurry

made with Shrinkage Compensating Cement in concrete/RCC work.

Providing and inserting 12mm dia galvanised steel injection nipple in

honey comb area and along crack line including drilling of holes of

required diametre (20mm to 30mm) up to depth from 30mm to 80mm at

12 26.39 required spacing and making the hole & crack dust free by blowing Nos. 2938.00 236.90 6,96,012.20

compressed air, sealing the distance between injection nipple with

adhesive chemical of approved make and allow it to cure complete as per

direction of Engineer-In-Charge.

Providing and fixing double scaffolding system (cup lock type) on the

interior & exterior side, up to complete storey height made with 40 mm dia

M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with

cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and

M.S. staircase system in the scaffolding for working platform etc. and

maintaining it in a serviceable condition for the required duration as

approved and removing it there after. The scaffolding system shall be

stiffened with bracings, runners, connection with the building etc wherever

required for inspection of work at required locations with essential safety

features for the workmen etc. complete as per directions and approval of

Engineerin-charge. The elevational area of the scaffolding shall be

measured for payment purpose .The payment will be made once

irrespective of duration of scaffolding.

Note: - This item to be used for maintenance work judicially, necessary

deduction for scaffolding in the existing item to be done.The item shall be

payable only to execute DSR Items. To execute DSR items

scaffolding/enabling works are considered to be included within the cost

of respective items.

Propping: Providing, fabricating & erecting temporary supports to the

structural members like beams, slabs etc. to relieve the load on the

members during breaking of damaged concrete, removal guiniting,

excavation or any dismantling work as per the instruction of engineer in-

charge/consultant. These supports shall be provided either in the form of

props or trestles fabricated using structural steel as per the requirement

14 NDSR 2 and as per the instruction of EIC/Consultant. Item rate is inclusive of the Each 1310.00 251.60 3,29,596.00

materials, all labour, supervision, tools and tackles and transportation etc.,

complete as per specification and as directed. (Rate for this item is for

propping duration for maximum 30 days from erection at that location)

Note: The item shall be payable only to execute DSR Items. To execute DSR

items scaffolding/enabling works are considered to be included within the

cost of respective items.

RUST REMOVAL: Exposing and cleaning of existing Reinforcement in

Columns, beams and slabs or any other RCC structural elements : -

Cleaning of existing reinforcement carefully at all heights in columns ,

beams or slabs where cracks are observed.

Applying of alkaline rust remover/converter primer of approved make on

15 NDSR 3 bars, including cleaning the reinforcement, wire brushing to remove loose Sqm 1896.00 213.14 4,04,108.70

rust spalls, with time interval of 6 hour between the coats etc. complete.

The rates are inclusive of all materials, labor, machinery, equipment, tools,

tackles etc. and disposal of debris into approved municipal dumping

yards, all complete . Mode of measurement will be per sqmt of the chipped

surface area of concrete.

RUST PASSIVATION: Providing and applying Two component, low

solvent, zinc rich epoxy resin based Anticorrosive Treatment of

reinforcements in coats with time interval of minimum 4 hours between

each coat of the specified approved makes . The application shall be done

by brush or spray as per Manufactureres recommendation, complete. The

rates are inclusive of all materials, labor, machinery, equipment, tools,

tackles etc., all complete. Mode of measurement will be per sqmt of the

exposed reinforcement area of concrete.

Corrosion Inhibitor- Providing and applying Coat of Concrete Penetrating

Corrosion Inhibitor EPCO KP100 or equivalent(which works on Bipolar

Inhibition Mechanism of the approved makes ) on concrete surface to be

repaired by using brush or spray at dosage specified by the manufacturer.

Mode of measurement will be 100% broken/chipped surface area of

Densification of Surfacing: Providing and laying monomer @0.5 Kg /

18 NDSR 6 Sq.mt for densification of top of the slab surfacing including cleaning and Sqm 1838.00 850.00 15,62,300.00

smooth finishing etc. completed as directed.

Digitally signed by ANUJ

SUMMARY OF Retro-fitting works

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

SI No. Description of Item Unit QTY Rate DSR Rate NDSR AMOUNT DSR AMOUNT NDSR

Corrosion Inhibiting Capsules: Insertion of POWRTHROW STEEL PULSE

or equivalent, sustained release Corrosion inhibiting caplets which protect

both anodic & cathodic sites and reduces Corrosion potential in the

reinforcement steel, by drilling 25 mm dia holes into the concrete at a

depth of 60 mm and inserts to be filled by epoxy mortar/polymer

modified mortar.

Galvanic Anode: Embeded Sacrificial galvanic Anode: Providing & fixing

Galvanic Sacrificial anodes in compliance with ASTM B 418 Type II in RCC

elements after tying them to the existing clean rebar with the specially

attached wires to it in a grid fashion to achieve corrosion potential more

negative than rebar. The sacrificial anode shall have zinc mass of at least 60

grams encased in conductive mortar. The anodes shall be soaked in water

for about 30 minutes before installation. Work to be executed complete as

per manufacturer specification and the project consultants.

INJECTION PRESSURE EPOXY GROUTING: Grouting injecting two part,

low viscosity injection resin, based on high strength epoxy resin of

approved make by pressure and using pressure epoxy injector with

accessories till nozzle refused to accept the grout including mixing of grout

having Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C

and should comply according to ASTM C 881, Type II and IV, Grade-1,

Class E+F and should have below properties. Compressive strength >= 70

21 NDSR 9 N/mm2 (7 days) according to ASTM C 579; Tensile Strength ~ 50 N/mm2 kg 809.00 1623.50 13,13,411.50

(after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus

~ 2000 N/mm2 (after 7 days at +30°C cure) (According to ASTM D 638);

Bond Strength ~ 10.8 N/mm2 (failure in concrete) after 14 days at +30°C

cure; Flexural strength ~ 50 N/mm2 according to ISO 178. Note: leakage

through other nozzle or cracks are required to be monitored while grouting

and such points to be sealed as and when required without any extra cost.

complete as per direction of Engineer-in-charge.

Crack Repair: Makeing 'V' groove of 10 mm wide and 10 mm deep over

22 NDSR 10 crack line by electrically operated angle grinder with diamond concrete Rmt. 500.00 98.60 49,300.00

saw blade and cleaning it by air blower as directed by Engineer-in-charge.

Crack filling: Supply and apply solvent free, moisture insensitive epoxy

resin based patch repair putty on vertical surfaces.

Product requirements: suitable for submerged condition; compressive

strength of 40 N/mm2 (1 day) according to IS 9162-1979.

Packer drilling, installation and finishing: Drilling and fixing injection

packers in RCC, including:

Drilling Holes: Drilling holes 10mm diameter in structural concrete at the

intervals as per recommendation of engineer in charge.

24 NDSR 12 Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. Nos. 2618.00 220.15 5,76,352.70

Fixing of Packers: Packer, 9.8mm diameter, 10cm long, with high strength

steel screw and structured rubber sealing, in cleaned holes

Cutting of Packers: Cut the packers by cut of wheel after completion of

grouting without damaging structural elements.

Application of Injection System : Supply and apply 2 component, elastic,

low viscous, solvent free, Polyurethane Injection resin based system for

permanent sealing, that does not need the presence of water for hardening

Product Requirements:

Viscosity of mixture ~ 250 - 600 mPa•s (at +30°C)

Confirmance label that product is approved to the essential requirements

and under market surveillance

For Shear Connector/Ties/Stirrups: Supply and fixing of shear

connectors/ties/stirrups using rebars of designated dia for

column/beam/Shear walls etc at designed embedement length wherever

required , including power drilling, cleaning of holes, then rebars should

be inserted in holes that should be filled with FIS V Plus of Fischer or

equivalent, a hybrid rebarring chemical with ETA approval, DIBt,

approved for diameter range from 8 mm to 28mm reinforcement bar as per

26 NDSR 14 manufacturer's specification as per the direction of Engg In-charge. 0.00 0.00

Drilling of hole should be done upto provided embedment depth as per the

design from manufacturer approved by EnC, followed by cleaning with

blow pump, wire brush and blow pump for 4 times, complete as per the

manufacturer's methodology. The chemical shall have tested service life of

50years as per ETA. Cost of providing, cutting, bending of rebar shall be

paid separately as per approved item.

Digitally signed by ANUJ

SUMMARY OF Retro-fitting works

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

SI No. Description of Item Unit QTY Rate DSR Rate NDSR AMOUNT DSR AMOUNT NDSR

Rebar For Main Reinforcement: Supply and fixing of main reinforcement

using rebars of designated dia for column/beam/Shear

walls/Foundations at designed embedement length wherever required ,

including power drilling, cleaning of holes, then rebars should be inserted

in holes that should be filled with FIS EM Plus of Fischer or equivalent, a

heavy duty pure epoxy based rebarring chemical with ETA approval, DIBt,

approved for diameter range from 8 mm to 40 mm reinforcement bar as

per manufacturer's specification as per the direction of Engg In-charge.

Drilling of hole should be done upto provided embedment depth as per the

design from manufacturer approved by EnC, followed by cleaning with

blow pump, wire brush and blow pump for 4 times, complete as per the

manufacturer's methodology. The chemical shall be approved for diamond-

drilled and water-filled drill holes as well as seismic applications in

performance categories C1, C2 for rebar connections. Product shall have

test certificate for 120years of service life & shall have ETA complying to

EAD 332402-00-0601-v01. Cost of providing, cutting, bending of rebar

shall be paid separately as per approved item.

Microconcrete with 6mm aggregaates : Application of repair Micro-

concrete of minimum M40 grade with 25% aggregate of 6mm dia. of

approved make for making up lost section of concrete or for increasing of

cross section for thickness above 75 mm, after the application of bonding

agents to ensure stability of the concrete, followed by water curing for at

least 7 days. The rates are inclusive of all materials, labor, machinery,

equipment, tools, tackles, etc., all complete.The microconcrete shall be free

flow, self compacting & should not require any vibratory

compaction.Payment shall be made on the basis of consumed dry material

of microconcrete and payment for bonding agents will be done through

separate BOQ item. The cost chips is considered to included in the item

Rebuilding the section of structutal damaged RCC elements to its original

size or as per consultants recommendations in thickness up to 50mm in 3

layers of 20+20+10 mm each by providing and applying with pre-batched,

one component fiber reinforced cementitious patch repair mortar. Dual

29 NDSR 17 Shrinkage expansion, fibre reinforced, single component, polymer Sqm 187.00 3926.15 7,34,190.05

modified, cementitious, repair mortar system supplied as a ready to use

blend of dry powders, which requires only the addition of clean water to

produce a highly consistent, repair mortar suitable for structural concrete

and masonry repairs complete as per direction of Engineer-in-charge.

Rebuilding the section of structutal damaged RCC elements to its original

size or as per consultants recommendations in thickness up to 25mm in 2

layers of 10 mm and 15mm each by providing and applying with pre-

batched, one component fiber reinforced cementitious patch repair mortar.

Dual Shrinkage expansion, fibre reinforced, single component, polymer

modified, cementitious, repair mortar system supplied as a ready to use

blend of dry powders, which requires only the addition of clean water to

produce a highly consistent, repair mortar suitable for structural concrete

and masonry repairs. Make SIKA, Fosroc or equivalent. complete as per

direction of Engineer-in-charge.

Structural Strengthening with Carbon Fiber Wrap 230 GSM & Epoxy

Adhesive : Supply and apply a stitched, one directional, high strength 230

GSM CFRP fabric in single layer over RCC member as per specification

after surface preparation by rounding off sharp edges to 25 mm radius and

cleaning it properly including thixotropic epoxy based impregnating resin

Wrapping the CFRP fabric to RCC member at desired orientation using

tamping rollers to avoid any air voids etc. and sprinkling sand over it as

31 NDSR 19 per direction and satisfaction of Engineer-in-charge. 0.00 0.00

Epoxy and CFRP shall be from same manufacturer, Epoxy shall have

durabity test reports to the level of satisfaction of Engineer-in-charge.

CFRP product used shall have minimum requirements:

Tensile strength (nominal) = 4900N/mm2; Tensile E – modulus = 250000

N/mm2; elongation at break (nominal): 2.1%; fabric design thickness =

a NDSR 19.1 Single Layer of Fiber Wrap Sqm 400.00 4310.35 17,24,140.00

Digitally signed by ANUJ

SUMMARY OF Retro-fitting works

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

SI No. Description of Item Unit QTY Rate DSR Rate NDSR AMOUNT DSR AMOUNT NDSR

Carbon Laminates : supplying and applying 1.4mm thick, 50mm wide

carbon laminate sheet of approved makes or specified in the drawing/

details following the steps and specification given below:

Surface preparation:Grinding concrete substrate, cleaning it with wire

brush removing oil, laitance if present, etc. complete.

Profiling: Applying compatible primer on prepared substrate, Filling the

holes and uneven surface with high strength epoxy putty etc. complete.

32 NDSR 20 Laminate fixing: Applying first coat of Saturant, cutting the carbon Rmt. 1176.00 2280.55 26,81,926.80

laminate sheet (1.4mm thick , 50mm wide) to size, fixing the laminate sheet

to structural element at desired orientation using tamping roller to avoid

any air voids etc. complete.

Quartz Sand Sprinking: Applying second coat of Saturant after min. 12 hrs,

rectify air voids, if any, and sprinkle the quartz sand on it to make surface

rough to take any further finishes.

Curing: Supplying and applying pre tested and approved acrylic based

concrete curing compound Concure ab or euivalent to concrete/ masonry

surface, all as per manufacturer’s specification and direction of Engineer-in-

Core Cutting: Cutting suitable holes/cores in reinforced cement concrete

34 NDSR 22 with core cutting machine to a depth of upto 200mm in RCC slabs. (All 0.00 0.00

complete as per direction of Engineer-In-Charge.)

Elastomeric & Decorative acrylic waterproofi ng coating for exterior walls:-

ASTM D412-02, ASTM E96, ASTM C1202-97, ASTM D 4587, ASTM C836.

Wallguard provides acrylic elastomeric coating with inherent crack-

35 NDSR 23 bridging ability. Wallguard is water based polymer coating composed of Sqm 5951.00 593.30 35,30,728.30

high quality acrylic polymer, with weather resistant pigments, properly

selected & graded fine filler . Complete as per direction of engineer in-

1. Carry out Visual Inspection, NDT and Drafting and Submission of

Repair Scheme & BOQ and BOQ should be vetted from IIT/NIT. Including

necessary tools, tackles and required staging for assesing the RCC and Non

structural members conditions.

Minimum test to be conducted at site as per the below:

1. UPV: 100 Nos

2. HCP: 100 Nos

3. Chemical test: 25 Nos

5. Cover meter: 50 Nos

6. Surface resistivity: 50 Nos

7. Rebound Hammer: 100 Nos

A qualified professional for the purpose shall be appointed after due

aproval frm Engineer-in-charge.

2. Shop Drawings: Preparation of complete set of shop drawings includin

finishing, MEP services, details, design calculations, as built drawings, etc.

and other details as and when desired by Engineer incharge/ client. A

qualified professional for the same shall be appointed with due approval

from Engineer in charge.

Total cost of DSR Items 2023 (A)(including factor @0.973) 36,76,144.28

Digitally signed by ANUJ

Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SUMMARY OF Pre-fabricated structure WORKS (BOARD ROOM, ELEVATOR SHAFT, CAFETERIA)

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR/ TOTAL RATE RATE AMOUNT AMOUNT

SL.No. Description UNIT

NDSR QTY DSR NDSR DSR INR

1 Steel Fabrication

Providing ,fabricating to required profile and shape, transporting, erecting and fixing in

position structural steel(using standard plate sections welded & built-up sections, tubes,

square, rectangular, pipe section, rolled sections such as angle, channels etc.) including

procurement of all raw steel materials , bolts nuts & washer inclu. its testing, allowance for all

types of wastages, straightening, cutting, bending of section wherever specified , drilling holes,

bolting, provision of necessary tools, testing etc. The rate shall also include required surface

preparation for application of all coats of shop and site primers and paints as specified .The rate

shall also include preparation of complete detailed fabrication drawings based on the design

drawings , required for all permanent and temporary structures and their approval from

Engineer-in-charge prior to execution. The rate shall also include provision and installation of

base plate, anchor bolts (measured in tones)etc as per drawings and specifications. Any

temporary support, Staging braces, strutting, tying or anchor bolt, black bolts, fasteners,

welding required to with stand the stresses of erection and carrying of plant and equipment’s

are to be included in the rate

Hilti Chemical Anchor Specifications

Post Installation Of Anchors with Hilti RE-500V3 Chemical

Providing and supplying heavy duty HIT-RE500V3 with HIT-V Threaded Anchor rod with a

pre-defined ratio (3:1) of resin and hardener in a soft foil pack of 330ml, 500ml. The product

should be approved by ETA, ICC, CSTB, COLA, BZS with Shock approval, Seismic approval in

Anchors and Rebars to use in cracked/un-cracked concrete, tested for service temperature of -

40deg C to +80 deg C. Application to be designed separately for Rebars as Simply Supported,

Moment, or Splice as per EC2/TR23 or relevant tested and accepted rebar guidelines. LEED

certified injection adhesive for rebar fixing in wet/dry flooded holes conditions for diameters.

1.2 NDSR 2 The chemical should have service life of more than 50 years and is to be tested for water NOS 48.00 ₹2,894 ₹0 ₹1,38,924

tightness. Drilling hole with double flute type drill bits/hollow drill bits to the required depth

by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using

serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with

piston plug and extension hose for longer depths to ensure no air bubbles are in the hole and

then fixing the anchor, conducting occasional site inspection, executing work by trained

personnel and occasional supervision from the manufacturer’s representative in India. The

installation and the setting instructions should be strictly followed as per the manufacturer’s

recommendations. RE 500 V3 for anchor application must have approval for Seismic, Fatigue

2.01 Zinc Standing Seam Roofing System SQM 323 ₹10,030 ₹32,43,100

Providing and fixing of Zinc Ti Standing seam as - 25/430 Secret Fix STANDING SEAM

ROOFING SYSTEM in 0.7 mm thick in comprising of the following layers

Top Layer – Zinc titanium standing seam profiled panels 25 /430 (25 mm minimum

seam height & 430 mm panel width) manufactured from zinc titanium alloy in

Preweathered Quartz Plus finish in 0.7 mm minimum thickness .The material properties shall

be as follows: Ultimate tensile strength: minimum 150 N/mm2, 0.2% Proof Stress: min

120 N/mm2, Panels shall be fixed to the substructure using Stainless Steel clips fixing &

sliding clips of suitable height with spacing as required for the wind loads.The Zinc should

have underside coating of 55 micron . It should be done at manufacturer facility The zinc

2.1.2 NDSR 2.1 manufacturer shall have all the required standing seam machines / tools & design assistance in

India & should have supplied zinc roofing/ cladding in projects in India. All installation is to

be carried out by manufacturer approved trained roofing installer. The Specialized Agency

should be have successfully completed zinc titanium works in India of the same brand for

which he has quoting to Main contractor. The roof sheeting manufacturer/supplier must have

a registered office in India. The roof sheeting manufacturer shall have ISO 9001 / 14001 quality

certifications for their manufacturing units. The zinc roofing sheets shall be as per EN 988

Second Layer: Anti abrasive breathable membrane laid at the underside of zinc panels. Anti-

Abrasive membrane to be laid underneath the roofing sheets . High Density polyethylene

underlay membrane of 0.5 mm (min) with Studs of 8.0 mm spaced at 19.5mm . Membrane

2.1.3 NDSR 2.2 shall have compression resistance of 250 kN/m². It shall have stud free lateral edge of 100 mm

for overlap of membrane. It should be chemically and electrically neutral, resistant to mould

and chemical aggressions,. It should be stabilized for thermal cycles and dimensionally stable

between (-30°C & 80°C).

2.1.4 NDSR 2.3 Third Layer: 1.2 mm thick GI strips to place at distance of 430 mm for fixing of clips.

Fourth Layer: 0.47mm TCT Hi-Tensile steel sheets profile with nominal 3.0 – 4.0 mm deep ribs

at pitch of nominal 48 mm – 52 mm center to center distance 550 MPa Yield Strength.

Fifth Layer: - Z GIRT: Sub girt in Z-section 1.6 mm thick in galvanized steel 275 gsm fixed to

steel purlins through bottom sheet at spacing of 600 mm C-C.

Sixth Layer: Insulation - Rockwool / stone wool (Roxul Rockwool) Insulation of overall

thickness 100mm and density 48 kg/m3

Digitally signed by ANUJ

SUMMARY OF Pre-fabricated structure WORKS (BOARD ROOM, ELEVATOR SHAFT, CAFETERIA)

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR/ TOTAL RATE RATE AMOUNT AMOUNT

SL.No. Description UNIT

NDSR QTY DSR NDSR DSR INR

Seventh Layer : Bottom sheet – Color Coated Trapezoidal Galvalume minimum thickness of

0.50mm (TCT) profile sheet of 980‐1050 mm effective cover width and 28‐35 mm height ribs

with pitch at 200‐250 mm center‐to‐center. The feed material is manufactured out of nominal

0.50 mm Total Coated Thickness (TCT), Hi‐strength steel with min. 550 MPa yield strength

with 150 gsm/m2. metallic hot dip coated with Aluminum‐Zinc alloy 55% Aluminum, 45%

Zinc) as per AS 1397. Fixed to the purlins with self-drilling screws SS 304 at 500mm spacing.

2.02 NDSR 3 Zinc Flashing in 0.7 mm thick Rmtr 100 ₹1,955 ₹1,95,011

Supply & fixing of 0.7 mm zinc flashing of Maximum Girth 250 mm in the same finish as the

roof finish for eaves , gables, ridges,fascia,gutters ,etc as required for site detailing . Mandatory

for site detailing

2.03 NDSR 4 Galvanised Stiffener in 0.8 mm thick (Additional) Rmtr 100 ₹468 ₹46,633

Supply and Fixing of 0.80 mm thick Galvanized Stiffeners maximum girth of 250 mm.

2.04 NDSR 5 Fascia & Soffit SQM 90 ₹9,138 ₹8,25,116

TOP LAYER- Zinc titanium standing seam profiled panels 25 /430 (25 mm seam height & 430

mm panel width) manufactured from zinc titanium alloy in Preweathered Quartz Plus or as

approved by Architect in 0.8 mm minimum thickness.The material properties shall be as

follows: Ultimate tensile strength: minimum 150 N/mm2,0.2% Proof Stress: min 120 N/mm2,

Modulus of elasticity: 90,000 N/mm2 Panels shall be fixed to the substructure using Stainless

Steel clips fixing & sliding clips of suitable height with spacing as required for the wind loads.

The zinc manufacturer shall have all the required standing seam machines / tools & design

assistance in India & should have supplied zinc roofing/ cladding in projects in India .For

Custom color Pigmento (3Coats) it should be achieived through organic pigments to maintain

natural aesthetics of zinc. The zinc roof sheets shall have a protection on its underside

consisting of a 55 micron thick composite acryl ate-urethane protective coating. The protective

coating eliminates any risks related to possible corrosion due to contact with incompatible

materials and where the underside of the roof sheets is not ventilated.It should be done at

manufacturer facility only

SECOND LAYER - Anti abrasive breathable membrane laid at the underside of zinc panels.

Anti-Abrasive membrane to be laid underneath the roofing sheets . High Density polyethylene

underlay membrane of 0.5 mm with dimple height of 8.0 mm & ClassE reaction to fire.

Membrane shall have compression strength of approx 250 kN/m2. It should be chemically and

electrically neutral, resistant to mould and chemical aggressions,. It should be stabilized for

thermal cycles and dimensionally stable between (-30°C & 80°C). Resistant to the chemicals and

plant roots. Not harmful to the drinking water. Resistant to the acid, alkali, oil and solvents. No

deterioration under soil.

THIRD LAYER -GI Strip - 1.2 mm thick GI strips to placed at distance of 430 mm for fixing of

FOURTH LAYER - Panel Rib : 0.47mm TCT Hi-Tensile steel sheets profile with nominal 3.5

mm deep ribs at pitch of nominal 48mm centre to centre distance.

2.05 NDSR 6 Zinc Flasing in 0.8 mm thick Rmtr 84 ₹2,083 ₹1,74,930

Supply & fixing of 0.8 mm zinc flashing of Maximum Girth 250 mm in the same finish as the

roof finish for eaves , gables ,ridges,fascia,gutters ,etc as required for site detailing . Mandatory

for site detailing

NDSR 6.1 For Fascia - MS Purlins @ 600 mm C-C

PUF (Polyurethane Foam) Sandwich Roofing Panels provide excellent thermal insulation,

durability, and lightweight construction. Standard specifications include panel thickness

options of 30mm, 50mm, 75mm, and 100mm, with pre-painted galvanized iron (PPGI) or

aluminum sheets of 0.4mm to 0.6mm thickness on both sides. The core consists of high-density

2.06 NDSR 8 polyurethane foam (40 ± 2 kg/m³), ensuring superior heat resistance and soundproofing. These SQM 121 ₹1,870 ₹2,25,803

panels are widely used for industrial sheds, cold storage, and commercial buildings.

Installation involves fixing panels over MS purlins or Z/C purlins using self-drilling screws

with EPDM washers, ensuring a weather-tight seal. Seams between panels are sealed with PUF-

compatible sealant or tongue-and-groove interlocks for enhanced insulation

Providing and installation of 1mm thick composite structural steel floor deck systems, steel roof

deck systems and related work with all attachments, shear studs fe 540 HT as pr IS 961,

flashings, metal closures, concrete stops, accessories and fittings at all heights all complete. The

work shall include all labor, material, equipment, permits, engineering and other services

necessary for the design and as required or a complete installation in accordance with the

drawings and structural metal deck specification

Outdoor Partition Wall in LGFS: Supply, fabrication, and installation of an outdoor partition

wall using Light Gauge Framing System (LGFS), designed for durability, weather resistance,

and structural stability. The system comprises cold-formed galvanized steel sections (C-

sections, U-channels) with a minimum thickness of 1.2mm–2.0mm, designed as per structural

3.20 NDSR requirements. The external face is clad with 8mm thick Cement Shear Board. fixed with SQM 52.08 ₹3,230 ₹1,68,218

corrosion-resistant self-drilling screws at appropriate spacing. Joints are treated with PU

sealant for weatherproofing. The internal side can be finished with gypsum board. The

installation includes necessary bracings, fasteners, and weatherproof coatings for enhanced

Digitally signed by ANUJ

SUMMARY OF Pre-fabricated structure WORKS (BOARD ROOM, ELEVATOR SHAFT, CAFETERIA)

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR/ TOTAL RATE RATE AMOUNT AMOUNT

SL.No. Description UNIT

NDSR QTY DSR NDSR DSR INR

Insultation: Providing and placing 50 mm thick Rock wool insulation of 48 kg/ cum. density

neatly packed in black fleece bag ( Non Woven Tissue ) of various sizes and shapes,bags shall

be fully stiched all round with 25 mm double leaf fold, sealing the rockwool fibre fully. The

bags to be stuffed in the cavities of Gyp. partitions from floor up to RCC slab above, cross

stiched from one side with GI frame work of partition by 24 g GI wire to keep bags in possition.

The quoted rate should be inclusive of RF tissue paper.

SUB-TOTAL ₹1,05,45,345

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SCHEDULE OF QUANTITY :- LIFT Work

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.No. Description of items Quantity Rate Amount

Supply, Installation, Testing, and Commissioning (SITC) of passenger elevators with glass

doors at all openings as per the following specifications:

Passenger Elevator - P1

• Type: Gearless, Machine Room Less

• Capacity: 780 kg

• Number of Passengers: Max. 13

• Speed: 1.5 meters per second

• Number of Landings: 9 (GF, 1st to 8th Floor)

• Number of Openings: 9 (on the same side)

• Travel Height: Approx. 27.9 meters

• Power Supply: 415V/240V, 50Hz

• Acceptable Voltage Fluctuation: +10% to -20%

• Rate of Acceleration / Deceleration: 0.6 - 1.5 m/s² (adjustable)

• Jerk: 0.7 - 1.5 m/s² (adjustable)

• Vibration in Car: Horizontal 20/18 MG, Vertical 20/18 MG max.

• Noise Level in Car: Max 48 dB(A)

Door Noise Level While Closing/Open: Max 52 dB(A) at 1m distance from the car door

• Type of Drive: Variable Voltage Frequency Drive (V3F)

• Machine Room: Machine Room Less (MRL)

• Indicators: 7 Segment 25mm Digital Direction and Landing Indicators

Additional Features:

1.Automatic Rescue Device (ARD) with dry maintenance-free batteries

2. Call Register Type: KDS-50 Micro Pushbutton for Car and Landing

3. 3-Way Intercom

4. Manual Cranking Operation

5. Integral Shaft for Gear and Motor

6. Emergency Stop Button

7. CVT/Built Voltage Stabilizer (Constant Voltage Transformer)

8. Pit Ladder and Ballustrade

9. Flooring: Provision for 19mm Granite flooring recess

10. Emergency Cabin Lighting and Alarm

11. FRD/Fireman Drive (Fire Rescue Device)

12. Controls: Resolve Microprocessor-based simplex full collective control with or without

attendant operation

13. Door Safety: PANA 40-Full Ray Curtain for Car Door Safety

14. Load Weighing Device with Indicator & Bypass Function

15. Lift Announcement System (LAS)

16. Safety Gears & Over-Speed Governor

17. Infrared Door Safety Device

18. Civil Works: Includes scaffolding, making holes, grouting, and concreting.

19. Provision for CCTV Connectivity

20. Obtaining License

SUB-TOTAL ₹41,30,000

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

1 Setup of Site Enabling Activities

The Contractor’s scope for site enabling activities shall include, but is not limited to,

providing and maintaining temporary site facilities, establishing site access routes, installing

barricading , hoarding and signage, arranging necessary utilities (e.g., power, water,

lighting), and ensuring site security and safety measures. These activities also encompass

1.10 NDSR setting up worker welfare amenities (offices, restrooms, first-aid stations) and managing LS 1

material handling areas. All enabling works are to be executed in accordance with relevant

safety regulations and shall remain in place until project completion or as otherwise directed

by the Engineer. All such cost are to be added to the rates and nothing extra shall be payable

2 INTERIOR DESIGN & ENGINEERING

Provision of interior design services for a B+G+8 office building, encompassing MEP

coordination, a pre-engineered roof structure for the elevator up to the eighth floor, concept

2.10 NDSR renders, detailed working drawings, and 3D visualizations. The scope includes LS 1

comprehensive integration of architectural, structural, and MEP elements, ensuring

adherence to all codes and aesthetic standards.

Brick Masonary :

Providing I- class Burnt Brick masonry with conventional type brick in cement mortar 1:4 in

half brick (115mm thick) including mild steel longitudinal reinforcement of 2 bars of 6mm dia

3.01 6.4.1 or hoop iron strip 100mm x 1.6mm at every third course properly bent and bonded at ends, CUM 186.38 ₹9,344.35 ₹17,41,561.83

scaffolding, raking out joints and curing etc. also inculde RCC Lintel (1:1-1/2:3) of

appropriate size (1 cement :1-1/2 coarse sand : 3 graded stone aggregate 25 mm nominal size)

Providing and laying autoclaved aerated Concrete (AAC) blocks masonry with 100mm / 125

mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part

3.02 6.38 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 CUM 46.59 ₹10,195.45 ₹4,75,046.59

coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars

at every third course of masonry work.

RCC Counter : Providing and laying RCC (1:1-1/2:3) for Counter 50 mm to 75 mm thk.

inclusive of all centering , shuttering , reinforcement (8mm to 10mm dia rod) and finishing

work with complete required material to proper completion of work and to entire satisfaction

Basin Counter:-Providing & fixing Counter ( 650deepx300 facia drop) with appropriate MS

framework for counter top finished with WPC Board 18mm thk, including making holes for

wash basin with drain grating and dust bin along with SS trim including edge polishing

around basin and edge moulding as per Drawing and approved sample of moulding. The MS

3.04 NDSR frameowrk to be made in appropriate MS angles of 50mmx50mm and secured to the SQM 20.31 ₹15,985 ₹3,24,653.32

brickwork with fashners as per drawings and protected with anti corrosive paint as per

standards. The Counter made should be finished in Granite with all the chamfering , edge

polishing, drop groove etc. The quoted rate should be inclusive of all fabrication charges &

Granite cost complete. Only counter top will be consider for measurements.

Water proofing treatment (Tapecreate) : Providing and applying water proofing treatment

on sunken / raised areas of toilets, etc. with three coats of tapecrete and sealing all junction,

corners and joints of pipes after first coat with epoxy mortar as per approved specifications of

the specialist agency including providing 10 years written guarantee against any defects and

3.05 NDSR leakage. (Tapecrete is polymer modified cementious material being manufactured in SQM 300.00 ₹923 ₹2,76,750.00

collaboration with FRC Composite Ltd. Canada. It shall have low permeability with a high

resistance to cracking. Quoted rate also including preparation of surface as required for

treatment etc.including applying of protective plaster 1:4 (1 cement : 4 Sand) as per advised

by Architect. The given quantity inclusive of floor & wall up to ht of 450 mm.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral

3.06 5.3 stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, CUM 3.57 ₹10,355 ₹36,953.24

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from

natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).

POP Putty : Providing and applying average 2-3 mm thk POP putty to the walls and

columns as required complete.

Cement Plaster: 15 mm cement plaster on rough side of single or half brick wall finished with

a floating coat of neat cement of mix :

3.09 13.5 Cement Plaster: 15 mm cement plaster on rough side of single or half brick wall of mix :

Concrete Sub-base: Construction of dry lean cement concrete sub base over a prepared

subgradewith coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not

exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after

blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum

3.10 16.80 moisture content to be determined during trial length construction, concrete strength not to be CUM 42.00 ₹4,148.65 ₹1,74,243.30

less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts,

laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and

curing etc. complete as per direction of

Engineer-in- charge.

Granite flooring: Providing and laying gang saw cut 30 mm thick, mirror polished pre

moulded and pre polished machine cut granite stone of required size and shape of approved

shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid

over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the

joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per

direction of Engineer-in-Charge.

3.11.1 16.87.1 With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. SQM 409.50 ₹4,950.90 ₹20,27,393.55

3.11.2 16.87.2 With granite stone of all colour except black, cherry/ruby red of area less than 0.50 sqm. SQM 150.00 ₹5,272.05 ₹7,90,807.50

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

4 Partition Wall

General and mandatory

The frame work in partition (As specified) will be of 50mm x 38 mm Aluminium sections to

have verticals as required (max 600 c/c) and as per Manul.'s specs. And horizontals at every

i) 1200 mm c/c or as per the Pattern of grooves whichever is less . Cost of partitions to include

insertion of necessary wooden members at skirting level or elsewhere as deemed fit by

The frame work in partition (As specified) will be of special section power pressed/ roll form

ii) G.I. sheet with zinc coating of 120 GSM as per Manuf.'s specs. Cost of partitions to include

insertion of necessary wooden members at skirting level or elsewhere as deemed fit by him

All full ht. partitions ,unless otherwise specified will go up to RCC slab,complete with

insulation , HDHMR Board etc. to be for first skin as applicable but till 100mm above false

iii) ceiling level. Above this shall go single skin of Gypsum. The second skin shall be over the

first skin of HDHMR, in HDHMR/ Gypsum or as specified basis finish dwgs. Actual Area

executed will be paid for.

All paneling framework, unless otherwise specified will go up to 150mm above bottom of

All exposed wooden surfaces in this Item or anywhere else in the BOQ to have melamine

polish as per approved sample and as/green building specifications.

All wooden/HDHMR framework under this item or anywhere else in the BOQ to be treated

with anti termite and fire retardant paint ( viper or equiv.)

All the wooden framework under this Item or anywhere else in the BOQ will have well

seasoned wooden members of species as defined in the individual item

All Glass to Glass, Glass joints shall be sealed with 6mmx6mm Alu I- Section/Box section as

viii) specified in the drawings with Glass works to be got done by an approved specialized

Any other Glass to Glass, Glass to wood and Glass to SS joints shall be sealed with Dow

Corning Glass sealant with minimum contact surface to be not less than 6mm after cleaning

and masking procedure with full tool & tackle .Silicon works to be got done by an approved

specialized Agency

All panel like, gypsum board, HDHMR, Ply veneer etc to be fixed to the channels with dry

x) wall screws, jointed and finished with requisite filler, paper tape, finisher and primer suitable

for the surface.

The outer skin on either side shall have 10mm grooves with aluminum 'L' angle bends fixed

to the thickness of board at the edges, neatly finished with paper tape and P.O.P punning.

All gypsum partitions to have 40mm wide 12mm thk HDHMR on corners on both

xii) sides(outward turning partition) to protect edges. Cost for the same shall be included in

partition item.

Partitions to have extra skin of wire mesh only when specified by the architect/PMC for

xiii) securing the finishes in given areas. The same will be paid separate extra only for the wire

All Aluminum demountable partitions to be quoted with the inclusion of a 12x12mm joint

groove made by a 12mm ply strip.

All Partition framework specified in Aluminium will be at a minimum of 600 x 600 but some

additional members may be required at some locations.

Aluminium Frame Work for Partition:- Providing and fixing full height aluminium

framework for Partitions of 50mm x 38 mm , 2 mm thk section at 600mm c/c including

4.01 NDSR necessary cut-outs for electrical & networking in the partitions. Frame to be firmly fixed to SQM 579.60 ₹1,620 ₹9,38,952.00

ceiling and floor with necessary hardware and supports as required as per architect's

Aluminium Frame Work for Panelling:-Providing and fixing full height aluminium

framework for Panelling of 25mm x 50mm , 2 mm thk section at 600mm c/c including

4.02 NDSR necessary cut-outs for electrical & networking in the partitions. Frame to be firmly fixed to SQM 60.00 ₹1,512 ₹90,720.00

ceiling and floor with necessary hardware and supports as required as per architect's

MS Frame Work for Partition:- Providing, fabricating and fixing full height MS framework

for Partitions of 50mm x 50 mm , 3.6 mm thk section at 600mm c/c including necessary cut-

4.03 9.154 outs for electrical & networking in the partitions. Frame to be firmly fixed to ceiling and floor KG 1642.20 ₹166.80 ₹2,73,918.96

with necessary hardware and supports as required as per architect's directions.The quoted

rate should be inclusive of red oxide paint complete.

GI Frame Work for Partition: Providing and fixing metal system up to ceiling height, which

includes frame work made of special section power pressed/ roll form G.I. sheet with zinc

coating of 120 GSM, consisting of U track 52mm wide having equal flanges of 30mm and

0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit using rawl

4.04 NDSR plugs with screw/expansion fasteners at 600mm centers, with first & last fixing point at not SQM 289.80 ₹972 ₹2,81,685.60

greater than 50 mm from either end. C studs 50mm wide having one flange of 34mm, other

flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the flanges of

floor and ceiling channels located directly opposite to each other at not more than 610mm

centers. Maintain 5 to 10mm gap between C Stud and web of U Track.

GI frame + one side gypsum : Providing and fixing G.I frame section (50x38mm) in

horizontal & vertical framework 600 mm c/c spacing as reqd for suitable rigidity & fixed

from floor to ceiling with 12 mm thick gypsum cladding in one side complete. The quoted

rate should be inclusive of taping & compounding.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

Fire Rated Gypsum Partition:- Providing & fixing of full height 132mm thick Gypsteel

ULTRA® stud partition includes two layer of tapered edge 15mm thick Gyproc® Fireline

(conforming to IS 2095 Part 1 : 2011 ) is screw fixed with Gyproc® Drywall Screws of 25mm &

50mm at minimum spacing of 300mm at Centre and 150mm at periphery of wall to either

side of 70mm Gypsteel ULTRA® C stud (0.5mm thick having one flange of 34mm and

another flange of 36mm made of GI Steel) placed at 610mm Centre to Centre in 72mm

Gypsteel ULTRA® floor and ceiling channel (0.5mm thick have equal flanges of 32mm made

of GI steel), which is anchored to the floor & true ceiling using HILTI HLC8x40/ HILTI X-

GN20MX anchor fasteners at 600mm c/c in zigzag manner. Stud and floor channel are

crimped together with crimping tool. 15mm thick Gyproc® Fireline board strip of 72mm

width is placed between ceiling channel and ceiling slab to improve fire performance of the

system. A Gypsteel ULTRA® noggin channel of 70mm width (0.5mm thick having two

flanges of 40mm each) has to be provided at the horizontal joints of outer layer boards screw

fixed to the studs using Gyproc® metal to metal flat head screws. The boards are to be fixed

vertically to the framework with joints staggered to avoid leakage through joints.

25x25x0.5mm Gyproc® angle bead should be used at all L-Junctions of partition. Finally

square and tapered edges of the boards are to be jointed and finished so as to have a flush

look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound, Gyproc®

Joint Paper tape (as per recommended practices of Saint- Gobain Gyproc India). The junction

of the partition with masonry & all penetration through the partition has to be treated with

Hilti/Pyroplex fire and acoustic sealant. All other detailing and specifications to be followed

as per approved shop drawing of Gyproc.

Laminated Partition wall with Aluminium Framework:- Providing and fixing partition

made in Aluminium framework 50 x 50 mm in horizontal & vertical framework 600 mm c/c

spacing as reqd with 2x12 mm thick commercial ply cladding on either side of frame section

& finished in 1 mm thick textured laminate with or without groove as per detail drawing .

Skins over partitions and panelling

i) All grooves unless otherwise specified shall be 12mm wide with wooden finish/white color laminate at the back

ii) The exposed edges of all Skin Types will be edge bound with suitable laminate/veneer/wood etc. as per Architects' directions

iii) All Gypsum boards shall have Al. angle / MDF bead on the edges

iv) All Glass to Glass, Glass to metal/ wood joints shall have Dow Corning silicon seal done by approved Applicator as per manufacturer's Specs

v) the cut outs made for erection of ducts / cts / cable tray to be sealed with approved sealant & finished properly & shall not be claimed extra

vi) 50 mm shadow groove to be provided everywhere at the junction points of the false ceiling.

1x12 mm thick Gypsum Plain Board cladding below False ceiling inclusive of taping &

compounding:- P/F Skin type S3 of Gypsum board skin with 50mm grooves complete with

angle beadings & paper tape as/manuf. Specs. . 12.5mm tapered edge gypsum plaster board

fixed to the channels (behind single layer of gypsum board)with dry wall screws, jointed and

finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster

boards. The outer skin shall have 50mm grooves with aluminum 'L' angle bends fixed to the

thickness of board at the edges, neatly finished. All components to be of India Gypsum/

1x12 mm thick Gypsum Plain board above False ceiling:- P/f skin type S3a of gypsum Board

skin for above ceiling works

1x12 mm thick Gypsum Habito board Cladding :- P/f skin type S3b of gypsum Board skin on

the existing frame work as per site requirement.

HDHMR Ply Cladding:- Providing & fixing of skinning (mentioned under wall finishes) with

all required hardware complete.

i) NDSR 6mm HDHMR Ply SQM 152.15 ₹826 ₹1,25,702.20

ii) NDSR 12 mm HDHMR Ply SQM 152.15 ₹1,139 ₹1,73,354.01

12 mm thick Bison Board Cladding:- Providing and fixing of 12mm thick Bison board

cladding on existing frame / surface as advised. Bison Board shall be securely fixed onto the

0.02 NDSR partition or panel using drywall screws spaced at intervals to ensure stability, as per best SQM 101.43 ₹1,186 ₹1,20,279.75

practices. This rate is inclusive of all Bison board material and installation using screws

complete in all respect.

18 mm thick BWP ply/ Boilo Board Cladding:- Providing and fixing of 18mm thick BWP ply

/ Boilo board cladding on existing frame / surface as advised. BWP ply shall be securely

0.03 NDSR fixed onto the partition or panel using drywall screws spaced at intervals to ensure stability, SQM 101.43 ₹2,122 ₹2,15,254.75

as per best practices. This rate is inclusive of all Bison board material and installation using

screws complete in all respect.

Cubicle Partitions : Providing & fabrication of free-standing medium-height partition is a

modular interior partition system designed to reach up to 2.1 meters in height with an overall

thickness of 75mm. It features a durable MS framework (50x50x2mm) spaced at 600mm

center-to-center for stability. The frame is securely anchored to the floor and fastened at the

ceiling for enhanced support. Both sides of the partition are clad with a combination of 9mm-

thick PET panels, laminated panels, and 6mm-thick lacquered glass panels as required for

aesthetic and functional balance. Concealed metal parts are coated with two layers of red

oxide paint for corrosion resistance, while exposed metal components are finished with flat

enamel paint as per architectural specifications. This assembly ensures durability, modern

design appeal, and compliance with safety standards.

5 Aluminium Glazed Partition System

Door frames specification

DSG Frame in 100 X 25 Door Frame with 65x45mm Double glazed stile shutter

Supply & Installation of Modular Aluminium single door frame, 100 mm System, using ALN

100.04+ALN 100.14 (100mm x 25mm) with door jamb inserting 65 x 45mm Using ALN

D65.01, ALN D65.02, ALN D65.03 glass bead horizontal bottom for 6+6mm thk.toughened

glass having rubber gasket.

45dB STC (Acoustic performance as per ARAI)

Hardware - Concealed Door closer, Lever handle, lock body with cylinder, hinges and Drop

Finish - Powder Coated

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

100X25 Double Glazed Series

Supply & Installation of Modular Aluminium double glazed partitioning frame of 100mm

System, using ALN 100.07+ ALN 100.08 (100mm x 25mm) as vertical channel, wall starter,

and ALN 100.09+ALN 100.08+100.10(100mm x 25mm) bottom channel with acoustic rubber

5.02 NDSR gaskit as per ALKOM specification. ₹0.00

45dB STC (Acoustic performance as per ARAI)

Finish - Powder Coated

6 Curatin Wall

Providing and fixing of powder coated aluminium curtain wall with pressure plateof size

15500mm X 3000mm and 23700mm X 2000mm for meeting room with approved glass 20mm

thick (5mm clear tuff + 10mm air gap + 5mm clear tuff) and 2 french doors of 2000mm X

3000mm on floor spring

Sliding/Fix Windows: - Providing and Fixing of 2400mm(w) X 1200(h) sliding windows with

1 panel and 1 sliding with Outer frame 2 track 70.5mm X 40mm and Sash 31mm X 61.5mm

and slim interlock of 37mm X 24mm with wall thickness 1.5 ± 0.2mm, as per approved

Drawing/ Design. Frame & Sash corner joining by Cleat with Allen screw of SS 304

grade. Window should have glazing EPDM gasket of appropriate dimension for glass 20mm

thick (5mm clear tuff + 10mm air gap + 5mm clear tuff)

Screed Work : Providing & laying plain cement concrete 50-60 mm thk, 1:2:4 nominal mix (1

cement :2 coarse sand : 4 graded stone aggregate 25 mm nominal size) of approved quality

with all lead & lift below/above the ground level as per drawing including the cost of

cement, levelling of surface of concrete with al lead and lift, labour, material as per

specifications and cleaning of RCC Surface, necessary curing complete. Screeding shall be

provided with 12 x 12mm groove to form a grid of 3000 x 3000mm. Top may require to be

finished with power trowel / manually to required finish as per site conditions as directed

by Architect/ Project Manager. (Mechanical mixing only).This additional detail ensures the

inclusion of the polythene layer to prevent seepage to be included in the quoted rates, as

Providing and laying Vitrified Floor Tiles of minimum thickness 8 mm of approved make

and colour, laid to pattern as per drawing, set in rich cement mortar 1:4, min 30-40 mm thick

including cement slurry complete with oxalic acid wash. Joints to run continuous horizontally

and vertically. Rate to include levelling of the existing floor if required. Tile joints to have 3

mm spaceers in between and to be finished with approved make tile epoxy grout in thickness

as directed. (The quoted rate should includes protecting the tile from polythence & POP

covering as required).

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall

lining (veneer work) including dado, skirting, risers of steps etc., in required design and

pattern wherever required, stones of different finished surface texture, on 12 mm (average)

thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry

@ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of

matching shade, including rubbing, curing, polishing etc. all complete as per Architectural

drawings, and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore

Supply and installation of carpet tiles, featuring a Multi-Level Pattern Loop construction with

nylon 6 fibre, 100% solution-dyed. It has a synthetic primary backing and Tile secondary

backing(premium PVC-free carpet tile backing) with Soil Protection. Tile size: 9 in x 36 in (23

cm x 91 cm), 45 ft² per carton, 20 pcs per carton. Uses LokDots or recommended adhesives.

Total thickness: 0.230 in (5.84 mm), tufted weight: 17 oz/yd² (576.4 g/m²). Shade as per EIC

Raised Access Flooring

Providing and fixing removable raised/false access flooring with system and its components

of approved make for different plenum height with possible height adjustment upto 50 mm,

comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame

work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as

directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube

of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate

of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI

Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the

pedestal head in position at the required level. The pedestals shall be fixed to the subfloor

(base) through base plate using epoxy based adhesive of approved make or the machine

screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the

pedestal head using fully threaded screws ensuring maximum lateral stability in all

directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel,

this system shall provide adequate solid, rigid support for access floor panel, the system shall

provide a minimum clear uninterrupted clearance between the bottom of the floor for

electrical conduits and wiring etc. all complete as per the architectural drawings, as specified

and as directed by the Engineer-in-charge.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti

static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel

welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical

cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot

welded together (minimum 64 welds in each dome and 20 welds along each flange). The

panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the

top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core

mixed with lightweight foaming compound. The access floor shall be factory finished with

Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for

superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of

the panel which is placed on four steel blocks. The panel will withstand and Uniformly

Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as

per the approved manufacturers specification and as per the direction of Engineer-in-charge.

All specification must be printed on the side of the panel to ensure the quality of the product.

11.54.2 450 mm Finished Floor Height (FFH) SQM 8.93 ₹ 5,977 ₹53,347.85

8 Wall Finishing

Notes - Panelling & Cladding:

1) All grooves unless otherwise specified shall be 12mm wide by using of aluminium U channel.

2)The exposed edges of all Skin Types will be edge bound with suitable laminate/veneer/wood etc. as per Architects' directions

3) All Gypsum boards shall have Al. angle / HDHMR bead on the edges

4) All Glass to Glass, Glass to metal/ wood joints shall have Dow Corning silicon seal done by approved Applicator as per manufacturer's Specs

5) the cut outs made for erection of ducts / cts / cable tray to be sealed with approved sealant & finished properly & shall not be claimed extra

6) 50 mm shadow groove to be provided everywhere at the junction points of the false ceiling.

Pre-Laminated MDF Slatted Panels

Providing & Fixing in place MDF slatted/fluted design as per design/ drawings over existing

framework mentioned in partition item fixed with dry wall screw @ 300mm c/c with

staggered joints to avoid through joints. The board shall be jointed in plain lining with

necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face,

complete as per details, specification or as directed by Engineer- in- charge.

Anti-termite Treatment needs to be done before cladding on both side of the ply board.

Including Anti-termite Treatment on both side of the ply board.

MDF Cladding - Single Layer

Providing & Fixing in place MDF as per design/ drawings over existing framework

mentioned in partition item fixed with dry wall screw @ 300mm c/c with staggered joints to

avoid through joints. The board shall be jointed in plain lining with necessary screws/ nuts &

bolts/ nails, including a coat of approved primer on one face, complete as per details,

specification or as directed by Engineer -in-charge.

Anti-termite Treatment needs to be done before cladding on both side of the ply board.

Including Anti-termite Treatment on both side of the ply board.

Sill Level Panelling: P/F panelling for sill level (L shape) made in 18 mm thick HDHMR

8.03 NDSR board finished in 1 mm thick laminate as per design / as per site requirement complete. SQM 135.32 ₹2,086 ₹2,82,272.33

Top of the ledge to be having 2mm thick edge binding tape as advised.

Laminate Panelling

Providing & Fixing in place Laminate cladding. Anti-termite Treatment needs to be done

before cladding on both side of the ply board. Including Anti-termite Treatment on both side

of the ply board.

Providing and fixing plain lining with necessary screws/nuts & bolts/nails including a coat

8.05 9.140 of approved primer on one face and fixed on wooden /steel frame work, complete as per

direction of Engineer-in-charge. (Frame work shall be paid for separately)

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type.

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS:

8.06 8.28 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on -

unexposed surface with :

8.28.1 Decorative veneer facings of approved manufacture 131.60 1,946.25 - ₹2,56,126.50

Add extra for PU Polish:

The surface will be PU- Matte finished polish along with grooves or profile to be insert as per

detail. Provision for cove/ surface lights will have to be kept & Rate to include making

necessary cut-outs/ openings for light fittings, etc. All components to be of approved makes

& all spacings should match their recommendation, standards as per specification or as

directed by Engineer- in-charge.

Aluminium Batten Panelling: P/F Aluminium Concealed fix timber finish batten cladding.

30 X 50mm batten size with fixed profile. Fixing on prepared wall surface or parttion surface

in straight/ diagonal pattern. Click type 2 parts aluminium battens of grade 6063 with

powder coating (60-70 microns) in solid/ wood shade approved by Architect. Clear spacing

between 2 baffles 100 mm. The wall surface to be levelled for cladding. Base plate to be

screwed to the wall/ parttiion at regular intervals vertically/ horizontally as per design. The

top part to be snap fitted in place, cocncealing fitting arrangeement/ screws. The whole

assemble to have a perfect tight fit to look like single peice of batten. The joints in the battens

to be seamless and cut panels at angle ot right angles to be perfectly matched. Two part click-

Mirror Panelling :

Proving and fixing of mirror panelling with framework mentioned in partition item with

12mm thick marine grade ply wood shall have provision of indirect lighting. The plywood

surface shall be fixed with 6mm thick edge polished clear mirror , the mirror shall be

properly fixed using in combination of double tape with primer applied to ply and miror

8.09 NDSR silicon sealants with necessary SS Studs arrangements with adhering manufacture SQM 36.48 ₹9,389 ₹3,42,514.37

specifications. The Frame and the ply shall be set inside and only mirror shall be projected

outside. Provision for cove/ surface lights will have to be kept & Rate to include making

necessary cut-outs/ openings for light fittings, etc. All components to be of approved makes

& all spacings should match their recommendation, standards as per specifications,

schedules or as directed by Engineer- in-charge.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

PET Panelling :Providing & fixing of HD PET panelling including all materials, labour,

hardware and equipment for PET wall, Paneling on one side over solid substrate with finish

stitching detail and Greengard certified using commercial MDF as base for maximum

acoustic performance of STC rating. Density range 1650 GSM g/m2 for 9 mm & 2400 GSM

g/m2 for 12 mm. The noise reduction coefficient be upto 0.65 for 9mm and upto 0.7 for

12mm. The weighted sound absoption coefficient to be upto 0.55 & sound absoption class D

for 9mm. For 12mm weighted sound absorption coefficient upto 0.6 & sound absoption class

C. The panels shall confirm to Class 1 Fire Ratings tested as per BS 476 Part 6 (Fire

Propagation) & 7 (Surface spread of flame) and alsp ASTM D 2859 (Ignition characteristics).

Low VOCs emiision, formaldyhyde free.

Commercial PET panels sizes shall be tailored to fit the designated wall specifications, within

a standard range of dimensions and custom size. Felt panels, perimeter stitching /pasting to

complying with technical specifications. Typical panel/ panels length may vary due to actual

field dimensions as panels are to be of equal sizes. The cost Shall include all hardware, labour

material, Stitching etc & work should be completed as per specification schedules or as

directed by Engineer - in- charge.

PU Panelling :Providing & fixing of high-performance polyurethane panels per approved

drawings. Panels feature a profile with a rigid foam core and PU resin finish, achieving Class

8.11 NDSR 1 fire resistance. Should be UV-resistant, impact resistant, and scratch resistance and maintain SQM 21.60 ₹4,845 ₹1,04,652.00

±2 mm dimensional stability. Install on an approved support framework using color-matched

adhesives and concealed fixings. Colour and design as per approval of architect

Leatherite Panelling :- Providing & fixing of Leatherlite panelling including all materials,

labour, hardware and equipment for Leatherite wall Paneling on one side over solid substrate

with, foam cushoning and finish stitching detail and Greengard certified using commercial

MDF as base for maximum acoustic performance of STC rating. Commercial leather panels

sizes shall be tailored to fit the designated wall specifications, within a standard range of

dimensions and custom size leather panels. Perimeter stitching to complying with technical

specifications. Typical panel/ panels length may vary due to actual field dimensions as

panels are to be of equal sizes. The cost Shall include all hardware, labour material, Stitching

etc & work should be completed as per specification schedules or as directed by Engineer- in-

Lacquered Glass Panelling: Providing and fixing of 6 mm thick HDHMR panels covered

with 6mm thick Coloured Lacquer Glass fixed with manufacturer specified adhesive in an

approved color, shade, and design. The Glass includes edge polishing all around to ensure a

8.13 NDSR seamless finish per the drawing specifications. HDHMR panels shall be securely fixed onto SQM 60.94 ₹3,570 ₹2,17,541.52

the partition or panel using drywall screws spaced at intervals to ensure stability, as per best

practices. This rate is inclusive of all HDHMR material, Lacquer glass application, aluminum

U trims for grooves, edge bending, and installation using screws.

Fluted Glass Panelling: Supply and installation of fluted glass for interior applications,

including cutting, edging, and fixing in position as per design requirements. The glass should

be of specified thickness (typically 6mm to 12mm) with uniform fluting, free from defects

such as waves or bubbles. Installation includes providing appropriate support, sealing, and

protection of adjacent surfaces. Ensure the glass is installed level and plumb, with all edges

properly finished.

Fabric Panelling: Providing and fixing of 25 mm glasswool covered with Fabric in an

approved color, shade, and design. Fabric shall be securely fixed onto the partition or panel

using drywall screws spaced at intervals to ensure stability, as per best practices. This rate is

inclusive of all Sitatex board material, Fabric application, PVC gripper for grooves, and

installation using screws.

Price of fabric Rs 400/rmtr

8.16 NDSR Metal Panelling with CNC cutting: SQM 21.48 ₹5,610 ₹1,20,502.80

Textured/Printed glass panelling - P/F of textured/ printed glass as per selection by

Wallpaper:-Providing, cutting and pasting of wallpaper as per approved design on a smooth

2 coat painted surface by using approved adhesive.The cost shall include approved

8.18 NDSR adhesives, hardware, labour, lift, scaffolding at all levels and elevations, including protecting SQM 1249.39 ₹1,734 ₹21,66,445.73

the wallpaper with approved method till hand over, house keeping, completion of all works

to be carried out as per the design intents and as directed by Engineer-in-Charge.

Premium Wallpaper:-Providing, cutting and pasting of wallpaper as per approved design on

a smooth 2 coat painted surface by using approved adhesive.The cost shall include approved

8.19 NDSR adhesives, hardware, labour, lift, scaffolding at all levels and elevations, including protecting SQM 109.92 ₹2,856 ₹3,13,931.52

the wallpaper with approved method till hand over, house keeping, completion of all works

to be carried out as per the design intents and as directed by Engineer-in-Charge.

Solid surface Tiles : Providing, Handling, shifting, cutting and cladding of solid surface

Corian tile with adhesive/ aluminium tube framework as per company standards. The tile

shall be non-porous, homogenous, and composed of high-performance mineral& acrylic

resins. The material shall be thermoformable, stain-resistant, and compliant with fire safety

standards. Installation shall follow manufacturer guidelines using color-matched adhesives.

Shade as per selection of architect

Zinc Honeycomb Panel

Providing and fixing of 12 mm thick Zinc Honeycomb Panel consisting of top skin 0.7mm

zinc passing EN 988 and bottom Aluminium skin thickness of 0.5mm of AA3105 H14 grade

aluminium alloy passing EN485-2. The top coil will be pre weathered zinc . The bottom

aluminium sheet shall have service coating of 4-7 microns. The 10.8mm thick aluminium

honeycomb core shall have foil thickness of 0.076mm and cell size of 19mm.The honeycomb

core shall be of alloy AA3003 grade. The honeycomb shall be high pressure pressed in

controlled factory conditions with two-part high temperature cured PU adhesive to top and

bottom aluminium skin by mechanized glue spreader. The Panel shall pass EN13501-1

Class A2, s1, d0 classification for reaction to fire. The weight will be 7.3Kg/m2. The

manufacturer must have in-house NABL for FR testing along with the test equipment’s

(yearly calibrated with NABL accredited Lab) for key quality parameter check of all the batch

supplied and manufacturer will strictly supply the material only from the unit which has

been mentioned in the FPC certificate.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

Fixing of honeycomb panel

The 12mm thick Aluminium Honeycomb Panels shall be mounted on grid support system of

50 / 100mm M.S. (Hot Dip Galvanized-Minimum 100 microns) tubular section (or) Extruded

Aluminium tube of 50x50x2mm as per instruction by Engineer in charge. Fabricated Zinc

Honeycomb panels which will be fixed mechanically with demountable type aluminium

profile on to the back using pop rivets and it would be fixed with same extruded aluminium

profile which will be fixed to the back aluminium channel or MS profile or both as per design.

Providing vertical/horizontal grooves of 12mm/20mm for expansion. The installer shall

provide connections in the substructure to pass seismic zone V. Vertical /Horizontal

Stiffeners (Aluminium Channel/ Aluminium Hollow Tubular section) to be provided in the

Aluminium Honeycomb sheet used for giving extra intermediator support to final Zinc 0

Honeycomb Panel Size to prevent the panel from sagging/deflecting. The system shall be

designed to withstand a wind pressure confirming IS 875-Part III 2015 at all levels, elevations

and heights. The extruded section shall be of 6063 T6 alloy Conforming to ASTM B 221M and

are designed as per AS: 1288-2006 to withstand a wind pressure at all levels, elevations and

heights. All concealed aluminium surfaces/ any extruded aluminium cleats / clamps shall be

finished with chrome-free pre-treatment primer/ anodized finish. All extruded Mild steel

sections shall comply to IS 2062 Grade A and Hot Dip Galvanized to minimum 100 microns

coating. The manufacturer should be ISO 9001:2015 Quality Management System

Certification compliant with in house testing facility and should have their own

manufacturing plant in India.

Tile Cladding with adhesive : Providing, Handling, shifting, cutting and cladding of tile as

per selection on wall with 4 mm Grout in pattern or paper joint as per design clad over dry

wall partition with suitable Adhesive to fix the tile. The tile sample to be approved for

8.22 NDSR workmanship and quality acceptance. The Tiles and joints to be protected by masking SQM 1266.10 ₹4,182 ₹52,94,830.20

tape prior to grouting, i/c necessary pigmentation to match with the colour of Tile. The cost

shall include labour, adhesive, cutting, cleaning etc., including all other necessary related

works as per specifications and schedule and directed by Engineer In-charge.

8.23 Stone wall cladding: Providing and cladding on walls following: ₹0

Machine cut and machine pre-polished Italian Marble slab 19mm thick of size as per

drawings set on 6mm thick bed polymer based adhesive including pointing with matching

Epoxy grouts to match the shade of the slab. The rate should also be inclusive of applying

temporary supports to the cladded stone as directed by the Architect at site. Cost to be

inclusive of hand buffing/cleaning on surface, chemical treatment, sealant on marble surface

etc complete as per directions.

8.24 NDSR Providing and Laying 75 mm high with the same stone as per item no mentioned above RMTR 408.00 ₹ 1,214 ₹4,95,230.40

complete with edge chamfering & polish

Tile Skirting : Providing, Handling, shifting, cutting and Fixing of 100 mm High &

10mm thick tile skirting over 10-15 mm thk cement mortar (1 cement : 4 coarse sand)

complete as per Specifications and Schedules and as shown in elevations or as directed by

Engineer In-charge.

Aluminium Skirting (75 mm high): Providing and fixing 1.5 to 2mm thick extruded

8.26 NDSR anodized aluminum skirting as per IS standard pasted/fixed over 12 mm thick BWP ply as SQM 76.13 ₹494 ₹37,583.86

per Architects approval.

Aluminium shadowline Skirting with LED (100 mm high): Providing and fixing 100mm

high Aluminium shadowline Skirting featuring integrated LED lighting for a refined, ambient

glow 4000k with necessary accessories including connector and Corner connector for better

detail. Color as per architect approval.

Aluminium shadowline Skirting without LED (100 mm high): Providing and fixing 100mm

8.28 NDSR high Aluminium shadowline Skirting with necessary accessories including connector and SQM 150.00 ₹808 ₹1,21,125.00

Corner connector for better detail. Color as per architect approval.

9 False Ceiling

Gypsum Board Suspended Ceiling:- Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37

mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200

mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board

with BIS certification marks)

9.02 NDSR Same as above but using 12mm thick Calcium Silicate Board instead of Gypsum Board. SQM 71.37 1,198.50 ₹85,536.95

Gypsum Board Cove : Providing and fixing upto 200 x 200 gypsum cove with or without

provision for light as per drawing complete with necessary cut-outs for services out lets.

9.04 NDSR Extra & above cost for making cove in curved shape. RMTR 58.83 ₹224 ₹13,201.90

P.O.P. False Ceiling - Providing and fixing in position multi level POP false-ceiling with

chicken mesh suspended on G.I. frame work in design as shown in the drawing. The G.I.

frame work consist of Perimeter channel of size 27mm x 0.5mm. Intermediate channel of size

45mm x 0.5mm thick. Ceiling section of 0.5mm thickness. The chicken mesh of approved

quality will screw on above mentioned GI frame & cover with Plater of paris. Jointed and

finished with requisite filler, paper tape, finisher suitable for Plaster of paris including

necessary coves and shadow grooves, trap doors, cutting for lights & all complete as per

specifications and schedules or as directed by Engineer In-charge.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

POP Cove in curve shape : Providing and fixing upto 200 x 200 Plater of paris cove with or

9.06 NDSR without provision for light as per drawing complete with necessary cut-outs for service RMTR 225.00 ₹561 ₹1,26,225.00

outlets etc. or as directed by Engineer- In-Charge.

POP Cove Straight : Providing and fixing upto 200 x 200 Plater of paris cove with or

9.07 NDSR without provision for light as per drawing complete with necessary cut-outs for service RMTR 44.27 ₹796 ₹35,221.21

outlets etc. or as directed by Engineer- In-Charge.

Grid Ceiling :-Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System

with TILES usiing SILHOUETTE EXPOSED GRID/ Ultralive.

The tiles should have Humidity Resistance (RH) of 95%, NRC Upto 0.9/0.7, Light Reflectance

>85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class

0/ Class 1 (BS476 Part 6&7) in module size of 600 X 600 X 15 mm .

9.08 NDSR The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating ₹0

a 6mm central reveal in white/black colour and with a web height of 45mm and a load

carrying capacity of minimum 15.68 Kgs/M2. Silhouette, Main Runners & Cross Tees to have

mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections

have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test.

The Tile & Grid system used together should carry a 10 year warrantee.

To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit

using specific manufactors suspension system (specifications below) at 1200mm maximum

centre & not more than 150mm from spliced joints. The First/Last suspension system at the

end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm

long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600

mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm

modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross

tees. The 1200mm cross tees to have central “birdsmouth” notches to facilitate fitting of

600mm cross tees. Perimeter trim to be shadow wall molding (dimensions: 19x7x7x14mm),

secured to walls at 450 mm maximum centres.

SUSPENSION SYSTEM accessories manufactured and consisting of M6 Anchor Fasteners

with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a

Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.68 mm of 1.83 m

length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook

clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of

110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main

runner. (Note:- Quoted rate should includes Grid + tile)

Metal Ceiling- Providing and fixing tiled false ceiling of specified materials of size 595x595

mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized

steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"

runner with suitably spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size

24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T"

at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at

middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size

24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc.

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6

mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable

rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to

center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted

with polyester paint, all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and

0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both

sides inclusive) and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and

0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both

sides inclusive) and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending.

Laminated ceiling: Providing & fixing laminated ceiling with concealed wooden /GI frame

9.10 NDSR work with 12mm thick ply cladding & finished in texture laminate as approved. The quoted SQM 143.20 ₹5,182 ₹7,42,005.12

rate should be inclusive of all hardware & accessories.

Pelmet : P/F of pelmet made out of 19mm Comm Board in L/U- profile fixed to RCC slab

with dash fasteners/ adequate rough wood framings..Cost to include prelamination of these

pelmets in an appropriate white laminate as approved by the Architect and any support

required to suspend it from the ceiling .

i) NDSR Size:- 200 x 200 mm (U Shape) RMTR 118.80 ₹520 ₹61,799.76

ii) NDSR Size:- 300 x 500 mm (L Shape) RMTR 37.71 ₹1,326 ₹50,003.46

Accoustic Baffle Ceiling :- Providing supplying & fixing of baffle ceiling made from 25mm

single thickness PET acoustic sheet inserted inside 25 X 10 mm powder coated GI/aluminium

U profile. Baffle size 25mm x100 mm @150 mm c/c in multicolors shade as approved. The

quoted rate should be inclusive of any additional arrangement required to fix the linear light

as advised in the drawings.

Density range of 3600 GSM g/m2. The noise reduction coefficient be upto 0.9. The weighted

sound absoption coefficient to be upto 0.8 & sound absoption class B. The baffle shall confirm

to Class 1 Fire Ratings tested as per BS 476 Part 6 (Fire Propagation) & 7 (Surface spread of

9.12 NDSR flame) and alsp ASTM D 2859 (Ignition characteristics). Low VOCs emiision, formaldyhyde SQM 218.59 ₹4,590 ₹10,03,328.10

SUSPENSION: Baffles to be fixed to the load bearing 25 X 25 powder coated GI U-profile

channels @ 150c/c. Load U-profile channels to be hanged from the soffit with the help of 6mm

threaded rod & metal fasteners @1200 mm C/C. The U-profile to comprise of square/ roubnd

holes @ 25 mm C/C to enabl;e baffles to be screw fixed to carrier. U- Profile to be connected to

each other using U –Profile Splice.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

Accoustic Clouds

Acoustical clouds which are 30 mm thick, flat glass fibre panels of Humidity Resistance RH

95%, with embedded frame made of aluminium extruded section of 38X10mm of grade 6063-

T6 as per dimension mentioned in below table for reinforcement and secured hanging.

Embedded extrusion shall have grub slot with pre inserted nut for group hanging and

connected using Aluminium die casted corner connector with ¼” – 20 threading for hanging

using cable adjuster for independent clouds. he form of SoundScapes Shapes - shall be Square

/ Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) /

Rectangle in standard Traffic White color with light reflectance 90% as per ASTM 1477-98 or

in the color specified by the Architect / Engineer in charge (Shell / Tangerine / Cranberry /

Moss / Kiwi / Reef / Lagoon). The SoundScapes Shape shall be made of Glass fibre panel

with density of 110-120 Kgs/m3 along with acoustical sound absorbing scrim on the face to

achieve sound absorption as per below mentioned table in accordance with EN ISO 354 :2003

(average of 500-4000Hz). The face and edges shall be finished with matching water-based

The panel shall be hanged using deck hanging kit comprising of griper structure anchor &

cap of dia. 20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft

cable of 1/16” dia.

Open cell metal Ceiling:- Providing and fixing of chequered metal ceiling as per design

mounted on Skeleton suspended ceiling system which includes G.I. Main channel and cross

9.14 channel are fixed to main T at 600mm c/c. Wall angle is then fixed along the perimeter of ₹0

wall with nail / screw. The suspension is done with all acessories like soffit cleat, levelling

clips & wire rods as per the drawings.

Aluminium Baffle Ceiling- Providing & fixing horizontal level suspended baffle ceiling

made of Aluminum Extrusion. The baffle blade shall be powder coated to Woodgrain/Plain

finish. Size as below with thickness of minimum 1.20 mm. Baffle sections to be suspended

with the help of G.I. Powder coated Baffle hangers ( with Locking Bolts ). fixed at c/c

intervals of 100 mm / 125 mm / 150 mm ( as per design ) to Load bearing G.I. Powder coated

1.60 mm thick U Profile Carriers. U Profile carriers shall be hanged from Soffit at 1200 mm

Centre to centre with the help od 6mm Full threaed G.I. RODS and 35 - 50 mm Metal

Fasteners. Complete with same colour End Caps

10 Painting & Polishing

All paints to be of low VOC content ( 250g/l)as per green building standards GC-03.

Providing and applying 2 or more coats of Plastic Emulsion paint on walls or ceiling

wherever advised . The surface shall be thoroughly cleaned and prepared by raking sand

10.01 NDSR papering and applying putty to achieve smooth and truly levelled surface. Required number

of coats and type of primer as prescribed by manufacture shall be applied before the

application of finishing coat as recommended by manufactures' specifications

i) In white/ Off White colour ( On Ceiling) SQM 1092.01 ₹356.40 ₹3,89,192.29

ii) In white/ Off White colour ( On walls) SQM 781.14 ₹356.40 ₹2,78,397.23

iii) In Accent/ Feature colours (On walls & Ceiling Selected area) SQM 1081.78 ₹394.20 ₹4,26,436.57

iv) Flat Spray paint on Metal/wood / Concrete surface as advised SQM 100.00 ₹356.40 ₹35,640.00

v) Paint on exposed Ceiling SQM 442.73 ₹378.00 ₹1,67,351.94

vi) Enamel Paint SQM 100.00 ₹345.60 ₹34,560.00

vii) Concrete Paint SQM 100.00 ₹2,862.00 ₹2,86,200.00

Finsihing wall with Premium Acrylic Smooth exterior paint with Silicone additives of

13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface sqm 2720.00 ₹131.30 ₹3,57,136.00

Texture Paint:- Providing and applying two coats of Texture paint after applying

corresponding roller coat as primer on pre-plastered surface as per approved sample in

approved shade. The composition of the texture paint should consist of ACRYLIC copolymer

resigns combined with quartz ,silica, mineral ,aggregates ,synthetic inorganic

pigments,bactericide,fungicides and various other additives, giving the product water

repellant properties. The first coat to be applied by brush or wool roller as a base coat, diluted

with sufficient water and the final coat (Undiluted) to be applied by trowel and finished with

acrylic trowel to maintain with or without groves,as per details in drawings. The thickness of

both coats should be 1.0 to 1.5mm. the water repellency of the product shall be >= 86gm/m2

as per test method IS:5410-1969. The rate shall include necessary scaffolding, labour and

material complete as per manufacture’s specifications and instructions by Engineer in-

Duco paint : Providing & applying of duco paint as approved by the Architect. The quoted

10.04 NDSR rate should be inclusive of base preparation of woodden/metal surface & all the required SQM 80.25 ₹2,093.04 ₹1,67,966.46

process to apply the Duco paint.

Satin Enamel Paint: Providing and applying 2 or more coats of Satin enamel paint with Spray

on exposed duct and cable tray surface as advised

PU Polish : Providing & applying 12 mm thk. exterior grade MDF board fixed on frame. Item

includes finishing panelling MDF board surface with Matte PU paint with gun spray after

preparation of surface as per manufactrer's specification etc. complete to the satisfaction of

Engineer In-Charge.

Providing and application of high performance metallic finish paint on appropriate base

(base extra). The metallic finish can be solid or special metal effects and should be scratch

resistant, have low VOC emissions, UV resistant. The finished surface should be level and

free of any cracks or other deformities.

11 Doors & Shutters

General and mandatory :

1.All wooden members to be well seasoned and knot free

2.All exposed wooden surfaces to have PU polish compliant with standards and as per environmemt friendly green building norms.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

3. The flush door shutter will be as per design and detail and inclusive of cost of hinges for mounting on Al frames or wooden frame as specified below.

4.All wooden sections to be treated with anti- termite & fire resistant treatment

5.All doors should have provision for fixing access control equipments etc. Cost of the same shall not be claimed extra.

6.For All doors Should have locks,handles,hinges,door stays, door stopper etc as per approval only

7.Any change in ht of doors due to site conditions will be paid accordingly as per sq.m rate quoted for doors.

8.All door should have half moon shape floor mounted door stopper

9 . All Aluminium Sections specified should be of thickness 2 mm - Miminum.

Shop Drawings required to be submited for Approval.

P/F Solid Single Leaf Laminated Flush Door (38 mm thick) on 4-5 side hinges (Compatible

to imported aluminium frame) . The door is to be provided with surface mounted door closer

11.01 ,door stoper, door handle , Locking mechamism , Cost of the Door to include necessary

hardware but to exclude door frame. The Quoted rate should also be inclusive of drop seal.

These will be in following Sizes:

iv) NDSR SIZE : 750 x 2400 mm with Air Transfer Grill 75mm high in powder coating . Nos 22.00 ₹28,620 ₹6,29,640.00

v) NDSR SIZE : 900 x 2400 mm Air Transfer Grill 75mm high in powder coating . Nos 22.00 ₹30,240 ₹6,65,280.00

P/F Solid Single Leaf Laminated Flush Door (38 mm thick) with Vision Panels on 4-5 side

hinges (Compatible to imported aluminium frame) . Door jamb 100 X 25 mm approved

proprietary aluminium section wtih approved shade powder coating, single action door.

8mm thk toughened glass vision panel of size 300 X 450 mm with 12 mm thk Beechwood

beading. The door is to be provided with surface mounted door closer ,door stoper, door

handle , Locking mechamism , Cost of the Door to include necessary hardware but to

exclude door frame. The Quoted rate should also be inclusive of drop seal. The size will be

Fire Doors : Providing and fixing insulated fire rated GI Sheet doors conforming to FD 120-PI

classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes

insulation. The factory manufactured door frame and shutter assembly shall be made out of

minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and

frame should be finished with powder coating in standard RAL shade finish having DFT of

11.02 minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All

accressesories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door

manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a

label confirming to type of door & its fire rating. The door must carry a 5 years valid test

evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in

accordance with ISO/IEC 17025.

The Door frame shall be single / double rebate grooved profile of size minimum 100mm x

57mm / 154x77mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet.

Frames shall be butt / mitered joint and field assembeled with bolting system. Frames to

have inbuilt grooved to accomodate Intumuscent fire seal strip . Frames to have inbuilt

grooved to accomodate Intumuscent fire seal strip of size 10x4mm. The frame should also be

provided with EPDM seal to limit the spread of smoke vide clause no. 7.2.6 of IS code. All

provisions should be mortised & provided with necessary inbuilt reinforcement to receieve

appropriate hardware. Frames should be provided with back plate bracket for anchor fastner

with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves for

installation of frame in finished plastered masonary wall opening.

Note :- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by

civil contractor/fire rated PU foam or such fire rated material may be recommended except

Door leaf should be minimum 46mm /49mm thick fully flush double skin door. Door leaf

must be manufactured from minimum 1.2mm(18gauge) thick galvanised steel sheet. The

infill material shall be mineral wool of minimum density 100 kg/cum. All doors shall be

factory prepped for receiving appropriate hardware and provided with necessary

reinforcement for hinges, locks, and door closers. The edges should be interlocked with a

bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the

meeting stile for both active and inactive leaf.

The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size

100x 75x3 mm alongwith all suitable hardware .

Vision lite size 200x300 mm or 150 x 400mm(max area 0.06sqm) wherever applicable should

be provided with single layered clear fire rated glass panes as per guidelines laid down

under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clipon arrangement.The glass will

be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width

alround on either face. Every Glass pane must carry a permanent marking of its glass

Rate should include supply and installation of door frame + door leaf and hardware set

complete with panic bar & drop seal & Astrgal seals as per requirements.

i) NDSR Double Leaf Fire Door of Size : 2000 x 2400 with panic bar Nos 11.00 ₹63,612 ₹6,99,732.00

ii) NDSR Single Leaf Fire Door of Size : 800 x 2400 without panic bar Nos 8.00 ₹46,008 ₹3,68,064.00

Door chaukhats: Providing and fixing frames of doors, of any size and shape and fixed in

position with necessary with 40 mm x 3 mm flat iron hold fast 400 mm long embedded in

concrete blocks 200 mm x 100 mm x 150 mm cement concrete 1 : 2 : 4 or fixed with extra

11.03 support of wooden batten in dry wall partition including applying wood preservative paint

on the surface coming in contact with wall as approved. Item also includes mellamine polish t

over a coat of wood primer / filler on wooden surfaces and anti-termite paint etc. complete

and mellamine polish as approved by Architect.

i) NDSR Size 6'' x 2.5'' (Miranti Wood) RMTR 60.00 ₹1,293 ₹77,565.60

Architrave : P/F of moulding complete as per details drawing/ advised with polish /paint

as approved complete.

i) NDSR Size 1'' x 0.5'' (Miranti Wood) RMTR 67.00 ₹130 ₹8,683.20

ii) NDSR Size 3'' x 3/4'' (Miranti Wood) RMTR 150.00 ₹319 ₹47,790.00

Aluminum Stile door Shutter (Single Glazed):- Supplying & fixing of Single glazed Shutter

Door-Consisting of Single panel glazed door shutter in Anodized aluminium finish with

70x45 / 75 x40 mm system on all four sides using in vertical, and in top of the door and on

the bottom of the door for 12mm thick tempered glass insert with alround beading, Door

shutter to be formed of 12 mm Toughened glass (Compatible to imported aluminium frame)

like Narrow stile mortize lock with 35mm backset, offset handle 300mm , 70mm EPC with

one side key and one side thumb turn, Concealed door closer with hold open, floor mounted

door stopper and side / astragal drop seal for sound barrier. The quoted rate should be

inclusive of horizontal ntermediate section at center as shown in the view. The Quoted rate

should also be inclusive of drop seal.

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

ii) NDSR SIZE : 1000/1050 x 2400mm (Single leaf) Nos 8.00 ₹39,420 ₹3,15,360.00

iii) NDSR SIZE : 1200 x 2400mm (Single leaf) Nos 1.00 ₹42,012 ₹42,012.00

ALUMINIUM DOOR FRAMES FOR GLASS DOOR : Supply & Installation of Anodized

Aluminium Door Frame with jamb made put of horizontal member on top and both vertical

member 45x60mm or (36x100mm / 50x100 mm) as approved on the mockup, Along door

jamb with schlegal door trim and Hinges for 45mm Door as per manufacturers specification.

The door frame should be Compatible to hold the double glazed imported aluminium style

P/F Sliding Folding Movable & Collapsible wall with acoustic seal. The price should

include all hardware & equipments for installation of collapsible wall panels.

top-hung heavy-duty roller system on architectural-grade aluminum alloy tracks capable of

bearing up to 800 kg per panel load. The system includes adjustable steel suspension with

corrosion protection, 110mm thick wall panels filled with sound insulation material, MDF

cover boards, and concave/convex interlocking aluminum anodized profiles with an EPDM

magnetic strip and vinyl acoustic seal. The panels are supported by a steel tube skeletal frame

with aluminum anodized edge protection and 16mm MDF cover boards, featuring operable

EPDM pressure seals at the top and bottom for acoustic performance. A telescopic adjusting

panel with 120mm stroke ensures a tight closure at the end. The system can incorporate single

or double doors with stainless steel recessed handles, and a sonic barrier above the false

ceiling to minimize sound transmission, with MS structural support for installations

exceeding 1000mm height

SUB-TOTAL ₹45,75,765.60

General & Mandatory :

All Pre-laminated board specified in this Item or anywhere else in this BOQ shall be HDHMR Board .

All storage shutters and external surfaces to be factory fabricated and all laminates to be machine pressed.

All internal surgfaces to be finished in balancing laminate of 0.5mm- 0.7mm thick

the storage units to have finger grooves with integrated Recessed grip profile from haffle as indicated in the Millwork drawings.

The shutter handles etc if any to be approved by the architect/PMC before installation.

All hinge, drawer channels etc to be soft closing from standard make list

Full Height Storages (450 mm deep) : Providing & fixing Full Height Laminated storage as

per drawing . The overall Structure made in 18mm thick prelaminated board & back of

storages with 6 mm thick ply . Storages finished in 1 mm thick textured laminate from

everywhere except outer back side of storages and also including all SS snap hinges,

handles, locks etc & all necessary hardware as required. Shutter size varies between 375-

450mm wide & 450 mm deep as required with reverse bull nose edge on top & bottom of

12.01 NDSR shutter (for files, folders coats etc) with select shelves duly adjustable as required on metal SQM 42.34 ₹12,582 ₹5,32,671.55

stud supports with sleeves set in at intervals of every 375 mm height. PVC lipping on all

edges with matching shade, including laminated skirting in approved shade with all

hardware, magnetic catchers, tower bolts, etc complete as per detailed drawings. (Front

elevation area to be measured) All hinge, drawer channels etc to be soft closing from

standard make list

Base rate of laminate Rs45/- per sft

12.02 NDSR Same as item no-10.01 but for Janitor storage SQM 20.40 ₹11,340 ₹2,31,336.00

Medium Height Storages :- Providing & fixing Medium Height Laminated storage as per

drawing . The overall Structure made in 18mm thick prelaminated board & back of storages

with 6 mm thick ply. Storages finished in 1 mm thick textured laminate from everywhere

and also including all SS snap hinges, handles, locks etc & all necessary hardware as

required. Shutter size varies between 375-450mm wide & 400mm deep as required with

reverse bull nose edge on top & bottom of shutter (for files, folders coats etc) with select

shelves duly adjustable as required on metal stud supports with sleeves set in at intervals of

every 375 mm height / or as advised. PVC lipping on all edges with matching shade,

including laminated skirting in approved shade with all hardware, magnetic catchers, tower

bolts, etc complete as per detailed drawings. All hinge, drawer channels etc to be soft closing

from standard make list. The quoted rate should be inclusive of planter carcus with cut out at

the storage top as shown in the drawings & having 3mm thick GI sheet cladding on the inner

part of planter box..

Base rate of laminate Rs45/- per sft

Over Head Storages (450 mm deep) : Providing & fixing Over Head Laminated storage as

per drawing . The overall Structure made in 18 mm thick prelaminated board . Storages

finished in 1 mm thick textured laminate from everywhere except outer back side of storages

and also including all SS snap hinges, handles, locks etc & all necessary hardware as

required. Shutter size varies between 375-450mm wide as required with reverse bull nose

12.04 NDSR edge on top & bottom of shutter (for files, folders coats etc) with select shelves duly adjustable SQM 52.18 ₹12,582 ₹6,56,485.98

as required on metal stud supports with sleeves set. PVC lipping on all edges of matching

shade , including laminated skirting in approved shade with all hardware, magnetic catchers,

tower bolts, etc complete as per detailed drawings. (Front elevation area to be measured) All

hinge, drawer channels etc to be soft closing from standard make list

Base rate of laminate Rs45/- per sft

Under Counter Storages 850 mm high and 600 mm deep:- Providing & fixing Under

counter storages for pantry & basin as per drawing . The overall Structure made in 19mm

thick BWP ply. Storages finished in 1 mm thick laminate from everywhere except outer back

side of storages and also including all SS snap hinges, handles, locks etc & all necessary

hardware as required. PVC lipping on all edges with matching shade, including laminated

skirting in approved shade with all hardware, magnetic catchers, tower bolts, etc complete as

per detailed drawings. The quoted rate should be including the cost of granite. All hinge,

drawer channels etc to be soft closing from standard make list

Slotted Angle Rack:- P/f slotted Angle Racks powder coated made in MS sections and

framework as per approval for taking a load of 30kg/shelf.

Electrical Panel cabinet :- P/F both sides laminated shutters for Db's made of 19 thk comm.

Board with hard wood fixing , Al. air transfer grille, SS hinges.This might be side hung and

folding type.Wherever required bison board panelling needs to be provided behind the Db

Digitally signed by ANUJ

SUMMARY OF CIVIL FINISHING & INTERIOR WORKS

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR 2023/ Rate (In Rs.) Amount (In Rs.)

S.No. Description of items Unit Quantity

NDSR DSR NDSR DSR NDSR

Shaft Shutter:-Providing and fixing shaft door shutters made of 32mm thick block board,

finished with 1mm thick laminate of approved make, color, and design on both sides. The

work shall include the supply and installation of a robust door frame made of seasoned

hardwood, polished with approved shade and finish. The quoted rate shall be inclusive of all

necessary hardware, including heavy-duty SS hinges, tower bolts, door handles, stoppers,

and any additional fittings required for smooth functionality. The shutter shall be installed

with precision to ensure alignment, durability, and seamless operation. All materials,

workmanship, and finishes shall conform to relevant IS standards and as per the instructions

of the architect/engineer in charge.

Base rate of laminate Rs45/- per sft

SUB-TOTAL ₹24,44,506.33

Roller Blinds with 5% openness factor:- Supply & Installation of manually operated roller

Blinds.HARDWARE; TOP TUBE : Made of extruded aluminium with 38 mm Dia. and wall

thickness of 1.2 mm with spline adoptable to accommodate clutch .CLUTCH MECHANISM :

Moulded plastic having self lubrication with Glass fibre reinforcement, having a minimum

lifting capacity of 8 lbs weight capality - 8 lbs Head adoptability - 38 mm OPERATING

CHAIN : PLASTIC / STEEL ball chain adoptable to the clutch pitch for smooth operation of

blinds.LOCKING MEMBER : Plastic/ steel stop locks for limit setting adoptable to the steel

chain.Bonding ( Fabric > Tube ) : 30/36 mm wide double sided adhesive tape of 3M for strong

13.01 NDSR holding capacity.SPRING BOOSTERS: provided as per the requirement Bottom Bar : SQM 54.00 ₹1,051 ₹56,732.40

aluminium extruded circular section with powder coated finish, having a Min. weight to be

365 gms / Rmt for a perfect fall of fabric to avoid warpage / floating. Ends are covered with

end caps to give a perfect finish.FABRIC: - Screen fabric Roller Blinds Composition: 30%

polyester and 70% PVC.Openness factor - 5%, Weight 380 gms / sq mtr +/- 5%, thickness

0.53 mm +/-5%, Fire classification : NFPA NO.701-2004 TM#1,california administrative

code Title 19 BS 5867 part 2 Type B. Width(mm) :183/250/300 Mesh/ IN : 52 * 48 Breaking

strength: WARP> = 1300 WEFT> = 1200 Tear strength: WARP> =20 WEFT> = 20. color

fastness : ISO 105 B02 grade B. Anti ultravoilet : 95%

Blackout Roller Blind:- Supply & Installation of manually operated Blackout roller

Blinds.HARDWARE; TOP TUBE : Made of extruded aluminium with 38 mm Dia. and wall

thickness of 1.2 mm with spline adoptable to accommodate clutch .CLUTCH MECHANISM :

Moulded plastic having self lubrication with Glass fibre reinforcement, having a minimum

lifting capacity of 8 lbs weight capality - 8 lbs Head adoptability - 38 mm OPERATING

CHAIN : PLASTIC / STEEL ball chain adoptable to the clutch pitch for smooth operation of

blinds.LOCKING MEMBER : Plastic/ steel stop locks for limit setting adoptable to the steel

13.02 NDSR chain.Bonding ( Fabric > Tube ) : 30/36 mm wide double sided adhesive tape of 3M for strong SQM 135.00 ₹1,102 ₹1,48,716.00

holding capacity.SPRING BOOSTERS: provided as per the requirement Bottom Bar :

aluminium extruded circular section with powder coated finish, having a Min. weight to be

365 gms / Rmt for a perfect fall of fabric to avoid warpage / floating. Ends are covered with

end caps to give a perfect finish.FABRIC: - Blackout Roller Blinds Composition PVC /

FIBERGLASSWeight 470 gms / sq mtr, thickness 0.34 mm, Openness factor Aprox. 0%,

Fire classification CCC-C-521E & NFPA NO.701. CARE INSTRUCTION: Cleanable with

mild detergent.

Wooden Venetian Blinds: Providing & fixing of manual cord (polyester) operated 50mm

wooden venetian blinds for indoor use of winfab makes, with steel zinc plated u section head

rail in enamel paint / powder coated finish, bottom rail in the same wood species as wooden

slatz, the wood should be staines with natural finish & covered with protective pu coating &

end caps to be supplied with the same, size of slats as per architect's approval (50mm widths

x 2.5-3m thick)

13.04 NDSR Supply & Installation of Soness Somfy motor No 11.00 ₹29,070 ₹3,19,770

13.05 NDSR Remote having 4 channel No 6.00 ₹5,304 ₹31,824

Total cost of DSR Items (including factor @0.973) ₹1,67,71,283.07

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at

Lodhi Road, New Delhi, 110003

SUMMARY OF PLUMBING SYSTEM

Amount (In Rs.)

S. No. Description

1 SANITARY FIXTURES & FITTINGS 6,81,065.90 4,68,030.64

2 INTERNAL WATER SUPPLY 4,45,885.90 2,74,056.00

3 RAIN WATER PIPES & FITTINGS 2,117.70 1,07,250.00

4 SOIL, WASTE, VENT PIPES & FITTINGS. 7,20,717.40

Total cost of DSR Items (including factor @0.973) 10,98,584.62 0.00

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SCHEDULE OF QUANTITY :- PHE DSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S. No. Description Unit Qty Rate (In Rs.) Amount (In Rs.)

1.0 SANITARY FIXTURES & FITTINGS

1 DSR Code No. - Providing & fixing floor mounted white vitreous china single piece ,

17.81 double trap syphonic water closet of approved brand / make shape

size and pattern including integrated white viterous china cistern of

capacity 10 liters with dual flushing systems including all fittings and

fixtures with seat cover , cistern fittings , nuts bolts gasket etc

including making connection with the existing P or S trap complete in

all respect as per direction of engineer - in - charge .

DSR Code No. - Providing & fixing wash basin with C.I. brackets, C.P brass pillar

17.7 taps,32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets,cutting and making good the walls wherever

17.7.2 White Vitreous China Wash basin size 630x450mm with a single 15

mm C.P.brass pillar taps.

DSR Code No. Providing and Fixing Stainless Steel A ISI 304 ( 18/8 ) kitchen sink as

17.10 per IS : 13983 with CI Brackets and stainless steel plug 40 mm ,

including painting of fittings and brackets , cutting and making good

the walls wherever required .

17.10.1 Kitchen Sink with drain board

1.1 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1

metre long with S.S. triangular plate to Eureopean type W.C. of quality Each 20 349.15 6,983.00

and make as approved by Engineer - in - charge

17.22A Providing and fixing CP Brass 32mm size bottle trap of approved

quality & make and as per the direction of engineer in charge. Each 54 1034.80 55,879.20

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete.

17.28.2 Flexible pipe

1.20 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

1.3 17.34 Providing and fixing toilet paper holder

1.4 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125

mm high and 112 mm distance from wall of standard shape with

bracket of the same materials with snap fittings of approved quality

and colour, weighing not less than 105 gms.

1.5 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm

long, 200 mm wide with minimum distances of 37 mm from wall face

with concealed fittings arrangement of approved quality and colour,

weighing not less than 88 gms

1.6 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings

arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm

and effective height of 88 mm, weighing not less than 190 gms Each 8 708.95 5,671.60

1.7 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms

18.50.1 15 mm nominal bore Each 5 820.70 4,103.50

1.80 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

18.53.1 15mm nominal bore Each 110 574.30 63,173.00

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- PHE DSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S. No. Description Unit Qty Rate (In Rs.) Amount (In Rs.)

1.9 18.65 Providing and fixing PTMT soap Dish Holder having length of

138mm, breadth 102mm, height of 75mm with concealed fitting Each 8 111.45 891.60

arrangements, weighing not less than 106 gms

0 TOTAL CARRIED OVER TO SUMMARY

2.0 INTERNAL WATER SUPPLY

2.1 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of Engineer in Charge.(For Domestic & Flushing water

0 Internal work - Concealed & Exposed on Wall

2.1.1 18.7.1 15 mm nominal outer dia Pipes Metre 410 286.80 1,17,588.00

2.1.2 18.7.2 20 mm nominal outer dia Pipes Metre 210 335.00 70,350.00

2.1.3 18.7.3 25 mm nominal outer dia Pipes Metre 195 401.55 78,302.25

2.2 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,

i/c cutting and making good the walls etc.

(Only used on terrace floor)

2.2.4 18.10.4 32 mm dia nominal bore Metre 45 667.00 30,015.00

18.10.5 40 mm dia nominal bore Metre 54 811.90 43,842.60

18.10.6 50 mm dia nominal bore Metre 65 1048.35 68,142.75

2.3 18.18 Providing and fixing ball valve (brass) of approved quality, High or

low pressure, with plastic floats complete

2.4 16.7.1 Butterfly Valve (Manual ) with C I body SS Disc, Nitrile Rubber Seal &

O- Ring PN 16 pressure rating for chilled water/hot eater circulation

TOTAL CARRIED OVER TO SUMMARY 4,45,885.90

3.0 RAIN WATER PIPES & FITTINGS

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams. Each 6 54.70 328.20

TOTAL CARRIED TO SUMMARY 2,117.70

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New

SCHEDULE OF QUANTITY : - PHE NDSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

MR Rate MR Amount

S. No. NDSR Description Unit Qty

1.0 SANITARY FIXTURES & FITTINGS

Providing, Fixing & commisioning of CP brass wall mounted sink

mixer with C.P. wall flange, swinging spout complete as required with

flow rate of 6.0 LPM complying to Green Building requirements.

Providing, Fixing & commisioning of C.P. brass twin coat hook with

PVC rawl plug & C.P. brass screw complete as required.

Providing, Fixing & commisioning solid state, no touch operting, fully

hygienic hand drier of approved shade with single blower, with time

delay, summer & winter control, music while drying, volume ON/OFF

controls complete as required.

Providing, Fixing & commisioning low flow type two way bib cock and

flow restrictor 6 LPM at 3 Bar Pressure as per approved make

complete in all respect as per engineer in the charge.

Providing, Fixing & commisioning of vertical or horizontal storage type

hot water heater fixed to wall with anchor bolts & nuts, 15mm CP brass

angle stop cock and 15mm CP brass non-return valve complete

NSR 5 including making connections with 15mm dia CP connecting pipes on

inlet and outlet, suitable length of power cable and 15 amps plug

direction of Engineer-in-charge.

NSR 5.1 Capacity:- 15 Ltr. Each 8 22500 180002

TOTAL CARRIED OVER TO SUMMARY 4,68,030.64

2.0 INTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at

NSR-6 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.(For Domestic & Flushing water supply)

Derrived 65 mm dia nominal bore Metre 85.00 1150 97750

NSR-6.1 32mm nominal bore Metre 15.00 820 12300

NSR-6.2 40mm nominal bore Metre 35.00 1080 37800

NSR-6.3 50mm nominal bore Metre 45.00 1460 65700

Providing and fixing motorised butterfly valve rating PN 1.0 with

float type sensors suitable for 240 volts with working pressure rating

of not less than 5 kg/cm2 with control panel and sensors to open

NSR-7 valve when water level is low in tanks and to close when water level is

high in water tanks including butterfly valves, necessary cables,

conduits, upto junction box etc. complete. (upto 6 mt qty approx.)

NSR-7.1 40 mm dia ( Domestic Water Riser) Each 1.00 26540 26540

NSR-7.2 32 mm dia ( FlushingWater Riser) Each 1.00 33966 33966

TOTAL CARRIED OVER TO SUMMARY 274056

3.0 SOIL, WASTE, VENT PIPES & FITTINGS.

Providing and fixing uPVC pipes type - B conforming to IS: 13592 for

soil, waste and vent pipes including all fittings rubber ring type (plain

or with access door) e.g bends, junctions, cowls, offsets, access pieces,

jointing with rubber ring joints with lubricant etc. fixed with clamps to

walls with cement concrete 1:2:4 blocks complete in all respects.

Digitally signed by ANUJ

SCHEDULE OF QUANTITY : - PHE NDSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

MR Rate MR Amount

S. No. NDSR Description Unit Qty

Providing, fixing, jointing and testing in position the following uPVC

pipes conforming to IS: 4985 of 6 kg/sqcm pressure rating including all

fittings, solvent weld joints, testing complete for drainage system cut to

required length to be laid under floor and exposed including covering

all around with cement concrete and making good the same complete

Providing and fixing UPVC inlet hopper with two or three inlets

fittings to receive waste pipes from fixtures waste. The hopper shall be

fabricated from 110 mm dia upto 600 mm long upvc pipe complete etc.

as per engineer in charge.

Providing and fixing uPVC 'P' trap of self cleansing design without

vent arm with provision for connecting pvc inlet fittings complete

including cost of cutting and making good the walls and floors

wherever required.

NSR 11.1 110 mm inlet and 110 mm outlet. Each 26 900.00 23400

Providing and fixing uPVC floor drain with supporting clamp ceiling

NSR 12 or in sunken portion including cutting and making good the walls and Each 16 850.00 13600

floors wherever required complete in all respects.

Providing & Fixing, Testing & Commissioning of Heavy class S.S.

grating with Cockroach proof SS strainer of approved design including

NSR 13 setting in floor with cement mortor to match with floor finish as per

architect requirement suitable for waster and FT.

Providing and fixing 125mm chromium plated grating with ring and

S.S anti cockroach basket and two S.S screws of approved design with

NSR 14 grating screwed down to the ring with s/s screws and embedding and Each 8 850.20 6802

setting ring into the floor with cement mortar .(As per approved make

Providing and fixing Brass clean out plug comprising of GI socket

caulked to pipe and cast brass plug with suitable inlet key for opening

male threaded joint with GI class C pipe & socket. Including lead

caulked complete as required.

NSR 15.1 100 mm dia Pipe Each 16 1,200.50 19208

TOTAL CARRIED OVER TO SUMMARY 7,20,717.40

4.0 RAIN WATER PIPES & FITTINGS

Providing and fixing uPVC pipes type - B conforming to IS: 13592 for

Rain water pipes including all fittings rubber ring type (plain or with

NSR 16 access door) e.g bends, junctions, cowls, offsets, access pieces, jointing

with rubber ring joints with lubricant etc. fixed with clamps to walls

with cement concrete 1:2:4 blocks complete in all respects.

TOTAL CARRIED TO SUMMARY 107250

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services &

Interior Works at Lodhi Road, New Delhi, 110003

SUMMARY OF FIRE FIGHTING SYSTEM

Amount (In Rs.)

S. No. DESCRIPTION

i. PIPING, VALVES AND ACCESSORIES 2921442.00

ii HYDRANTS SYSTEM 99191.00

iii FIRE EXTINGUISHERS 323334.00

Total cost of DSR Items (considering factor @ 1.0633 for GST @ 18%

& Correction Factor @0.973)

Total (DSR+Non-DSR) 34,45,022.31

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New

SCHEDULE OF QUANTITY :- FIRE FIGHTING SYSTEM DSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S. No. DSR 2022

Description Of Items Unit Qty Rate (Rs.) Amount (Rs.)

2.0 PIPING, VALVES AND ACCESSORIES

SLTC of M.S. pipe on surface

2.1 DSR -7.1 Supplying, laying, fixing, testing and commissioning of following

sizes (NB) of class 'C' M.S. pipes confirming to IS 1239 and 3589

including cutting, threading, welding etc. and providing all fittings

e.g. elbows, reducers, clamps, hangers, flanges, gaskets, nuts,

bolts and washers etc. including painting of pipes and fittings with

red paint over a coat of ready mixed primer, both of approved

quality and shade including cutting holes and chases in brick or

RCC walls/slabs and making good the same etc. complete in all

respect as required. (The Welding shall not be done for piping less

than 50 mm dia.) (heavy duty pipe)

2.2 DSR-18.9 Supplying and fixing Single Headed Internal Hydrant Valve oblique

pattern with instantaneous Stainless Steel coupling of 63 mm dia

with cast iron wheel ISI marked, conforming to IS : 5290 (Type A),

with 80 mm dia flanged inlet, with ABS cap and chain complete

with all accessories etc. as required.

2.2.1 DSR -18.9.2 Single headed Stainless Steel Each 8 6139.00 49112.00

2.3 DSR- 18.11 Supplying of Butterfly valves of PN 1.6rating of following sizes

with EPDM rubber lining seat and CF-8 stainless steel disc duly ISI

marked and stainless steel stem with lever/gear operation and

cast iron body in powder coated finish for fire fighting application

complete in all respects confirming to IS: 13095 as required.

2.4 DSR- 18.14 Providing, Installation, Testing and Commissioning of double

flanged cast iron Dual Plat Check Valve, PN 1.6 of following sizes

confirming to IS : 5312 complete with EPDM rubber lining seat and

stainless steel disc, rubber gasket, Gl bolts, nuts, washers etc. as

2.5 DSR -18.16 Supply, Installation, Testing and Commissioning 63 mm dia. 15

Mtr. Long RRL hose pipe with 63 mm dia. male and female

stainless steel couplings duly binded with GI wire rivets etc. ISI

marked, IS 636 (type-A) as required.

2.5.1 DSR -18.16.1 Stainless Steel (Grade 304) Set 8 5202 41616.00

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- FIRE FIGHTING SYSTEM DSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S. No. DSR 2022

Description Of Items Unit Qty Rate (Rs.) Amount (Rs.)

2.6 DSR - 16.7.4 Supplying, Installation, Testing and Commissioning of CI body

flanged (both ends) type serviceable suction / Y strainer with

(stainless steel / brass mesh) conforming to relevant IS

specifications amended upto date complete including providing

and fixing nuts, bolts, washers, gaskets etc. complete as required.

2.7 DSR -16.8 Supply, Installation, Testing and Commissioning of 100 mm dia

Borden type, Stainless Steel dial type Pressure Gauge including

brass isolation valve and siphon pipe having calibration of 0-16

2.8 DSR -18.17 Supplying and Fixing First Aid Hose Reel, wall mounting

swinging type complete with drum & bracket of MS

construction, spray painted in Post office Red, confirming to IS

884/1995 with upto date amendments, complete with the

following as required.

36 Meter long 20 mm dia water hose Thermoplastic (Textile

reinforced) Type - 2 as per IS : 12585

20 mm dia. ball valve & nozzle.

Drum and brackets for fixing the equipments on wall.

2.8.1 DSR-18.17.1 Connection from riser with 40 mm dia (Gun metal) stop valve &

2.9 DSR-18. 18 Supplying and fixing Stainless Steel branch pipe with 20mm dia

nozzle conforming to IS:903. suitable for instantaneous

connections to hose pipe coupling etc. as required.

2.9.1 DSR-18.18.1 Stainless Steel (Grade 304) Each 8 2416 19328.00

2.10 DSR-18. 19 Supplying and fixing instantaneous Fire Brigade Inlet Connection

(FBIC) comprising of Cast Iron body and Cast Iron instantaneous

male inlet coupling confirming to IS:904 with plug and cap with

chain as required with nuts & bolts and high pressure rubber

gasket, suitable for 150 mm dia MS pipe connection etc. complete

DSR-18.21 Providing, fixing, testing & commissioning of 15 mm dia quotirized

bulb type sprinklerof rating 68 degree centigrade with accessories.

DSR-18.21.1 Pendent sprinkler Each 540 522 281880.00

DSR-18.21.2 Upright sprinkler Each 50 522 26100.00

DSR-18.21.3 Horizontal side wall sprinkler Each 15 617 9255.00

DSR-18.21.4 Concealed type sprinkler Each 120 1435 172200.00

DSR-18.23 Providing & fixing flow switch in following sizes M.S pipe

connection etc, as required.

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- FIRE FIGHTING SYSTEM DSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S. No. DSR 2022

Description Of Items Unit Qty Rate (Rs.) Amount (Rs.)

DSR-18.25 Providing, fixing, testing & commissioning of sprinkler flixible pipe

(UL listed) with stainless steel with 15 NPT on reducer thread with

maximum working pressure 175 test pressure of 875 PSI with

branch in line inlet 25 mm NPT male thread to sprinkler head

outlet 15 mm female thread with reducer nipple two side bracket,

center bracket store bar of following sizes complete as required.

TOTAL CARRIED TO SUMMARY (DSR ITEMS) 2921442.00

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New

SCHEDULE OF QUANTITY :- FIRE FIGHTING SYSTEM NDSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR/MR Description Of Items Unit Rate (Rs.) Amount (Rs.)

1.0 HYDRANTS SYSTEM

1.1 NSR 1 Providing & fixing angle iron (40mm x 40mm x 5mm ) door

frame and MS sheet (2mm thick) cum glass shutter of size 2.1

mtr x 1.2 mtr (N.S) with 25mm x 25mm x 3 mm angle frame all

around & stiffened in between i/c hinges, handle, locking

arrangement, painting with approved synthetic enamel paint

i/c sign writing on glass at internal hydrant including providing

& Fixing MS sheet 2mm thick on remaining portion above door

to close opening i/c painting etc as required. Each 8 10917.00 87336

1.3 NSR 2 Providing and fixing M.S. epoxy coated puddle flanges of

required size to water tanks as per standard details fabricated

from heavy duty pipe and 6 mm thick M.S. Plate & 600 mm

length with 3 coats of food grade epoxy paint.

1.4 NSR 3 Supplying and fixing of Fire Man's axe with heavy insulated

rubber as per standard conforming to IS 926. Each 8 794.00 6352

1.5 NSR 4 Providing and fixing heavy duty SS Floor grating with frame of

approved design including setting in floor with cement motor

to match with floor finish as per architect requirement. (for

FHC drain pipe)

NSR 4.1 Size 100 mm x 100 mm Each 8 450.00 3600

TOTAL CARRIED TO SUMMARY (NSR ITEMS) 99191.00

2.0 FIRE EXTINGUISHERS

2.1 NSR 5 Providing and fixing mechanical foam type (ISI marked) fire

extinguishers consisting of welded M.S. cylindrical body

squeeze lever discharge valve 30 cm long high pressure

discharge hose, discharge nozzle, suspension bracket as per

ISI marked finished externally with red enamel paint and

fixed to wall with brackets complete with internal charger.

2.1.1 NSR 5.1 Capacity 9 lit. Each 8 8742.00 69936

2.2 NSR 6 Providing and fixing fire extinguisher of carbon dioxide type

consisting of brand new high pressure steel cylinder bearing IS:

7285 mark and having the approval of controller of explosives

Nagpur, wheel type valve bearing IS:3224 mark internal

discharge tube, 1 meter long high pressure discharge hose, non

conducting horn, suspension bracket, fully charged bearing IS:

making fixed to wall as directed conforming IS : 15683:2006

2.2.1 NSR 6.1 4.5kg capacity cylinder Each 16 4966.00 79456

2.2.2 NSR 6.2 22.5 kg (Trolly Mounted) Each 1 17750.00 17750

2.3 NSR 7 Providing and fixing water based CO2 type extinguishers

consisting of welded M.S. cylindrical body, squeeze lever

discharge valve 30 cms long high pressure discharge hose,

discharge nozzle, suspension bracket, ISI marked as per

IS:934 finished externally with red enamel paint and fixed to

wall with brackets complete with internal charges.

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- FIRE FIGHTING SYSTEM NDSR

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

DSR/MR Description Of Items Unit Rate (Rs.) Amount (Rs.)

2.3.1 NSR 7.1 Capacity 9 KG Each 2 18760.00 37520

2.4 NSR 8 Providing and fixing ISI marked portable fire extinguishers of

the following type.

2.4.1 NSR 8.1 Dry Chemical Powder ABC type of 6 Kg as per IS:15683 Each 16 7417.00 118672

TOTAL CARRIED TO SUMMARY 323334.00

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP

services & Interior Works at Lodhi Road, New Delhi, 110003

Summary of Electrical Work

DESCRIPTION OF ITEM AMOUNT DSR (INR) AMOUNT NS (INR)

INTERNAL ELECTRICAL WORK

I/A SH : I/A (Point Wiring) 45,33,771 2,37,475

I/C Sub Head (Distribution Boards) 9,81,655 1,57,883

I/D Sub Head (CABLE TRAY & RACEWAY) 8,69,323 7,75,566

I/E Sub Head (MAIN LT PANEL & MAIN DISTRIBUTION PANEL) 0 12,68,795

I/F Sub Head (LT CABLES) 2,95,272 41,49,899

I/H Sub Head (E A R T H I N G) 2,67,340 2,04,039

TOTAL COST FOR ELECTRICAL WORKS 69,47,361 67,93,656

Total cost of DSR Items 2022 (considering factor @ 1.0633 for

GST @ 18% including & Correction Factor @0.973)

Total ( DSR & MR ) 1,39,81,333

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

I/A SH : I/A (Point Wiring)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

1.10 recessed medium class Steel conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan

point/ call bell point (without independent switch etc.) with 1.5 sq. mm

1.54 FRLS PVC insulated copper conductor single core cable in surface/

recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

1.12 conductor single core cable in surface/recessed medium class Steel Metre 3753.50 334.00 1253669.00 DSR 2022

conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor

3 single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper

1.13 conductor single core cable in surface/ recessed medium class Steel Metre 400.00 537.00 214800.00 DSR 2022

conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor

4 single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following

1.14 sizes of FRLS PVC insulated copper conductor, single core cable in surface/

5 recessed medium class Steel conduit as required.

1.14.4 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire Metre .00 439.00 0.00 DSR 2022

1.14.5 2x10 sq. mm + 1x6 sq. mm earth wire Metre 135.00 570.00 76950.00 DSR 2022

1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 135.00 754.00 101790.00 DSR 2022

Supplying and drawing following sizes of FRLS PVC insulated copper

conductor, single core cable in the existing surface/ recessed steel/ PVC

6 conduit as required.

Supplying and fixing two module stepped type electronic fan regulator on

1.25 the existing modular plate switch box including connections but excluding Nos. 369.00 0.00 DSR 2022

7 modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6

1.56 A modular socket outlet and 2 nos. 5/6 A modular switch, connections Nos. 1.00 676.00 676.00 DSR 2022

etc. as required. (For light plugs to be used in non residential buildings).

(For UPS Supply on workstations)

Supplying & fixing suitable size GI box wih modular plate and cover in

front on surface or in recess including providing and fixing 25 A modular

1.57 socket outlet (near equipment point) and 25 A modular SP MCB, “C” curve Nos. 10.00 727.00 7270.00 DSR 2022

(at accessible point) including connections, painting etc. as required.

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface conduit,

or cutting the wall and making good the same in case of recessed conduit

10 as required.

Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc. as required.

1.27.1 1 or 2 Module (75 mm x 75 mm) (For Telephone, Data, TV Outlets) Each 298.00 0.00 DSR 2022

Supplying and fixing suitable size GI box with modular plate and cover in

1.31 front on surface or in recess, including providing and fixing 3 pin 5/6 A Each 397.00 477.00 189369.00 DSR 2022

modular socket outlet and 5/6 A modular switch, connections etc. as

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

Code Supplying and fixing suitable size GI box with modular plate and cover in

1.32 front on surface or in recess, including providing and fixing 6 pin 5/6 A & Nos. 268.00 586.00 157048.00 DSR 2022

15/16 A modular socket outlet and 15/16 A modular switch, connections

13 etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate

18 & switch box excluding modular plate as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along

2.0 with 40A 415 V "C" curve TP MCB complete with connections, testing and Each 2.00 1146.00 2292.00 DSR 2022

19 commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along

3.0 with 63A 415 V "C" curve TP MCB complete with connections, testing and Each 2.00 1530.00 3060.00 DSR 2022

20 commissioning etc. as required.

Supplying and fixing of wall fan complete with connections, testing and

21 commissioning etc. as required.

I/C Sub Head (Distribution Boards)

Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

1.0 MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 volts, on

2.4 surface/recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

2.4.1 4 Way (4+12), Double Door Nos. 4091.00 0.00 DSR 2022

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following

2.23 single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on

surface/ recess, complete with testing and commissioning etc. as

2.23.2 For 8 way, Double door SPN MCB DB Nos. 832.00 0.00 DSR 2022

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with connections, testing and

4.0 commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 volts, MCB

NON DSR complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following rating, 240/415 volts, "C" curve, four

NON DSR pole miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with connections, testing and

6.0 commissioning etc. as required.

NON DSR Nos. 1901.00 0.00 MR

Supplying and fixing of following rating double pole (Single phase and

neutral) 240 volts, residual current circuit breaker (RCCB), having a current

2.14 sensivity current 30 miliampere in the existing MCB DB complete with

connections, testing & commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral),

2.15 415 volts, residual current circuit breaker (RCCB), having a sensitivity

current 30 mA in the existing MCB DB complete with connections, testing

8.0 and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB

11.0 complete etc. as required.

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

I/D Sub Head (CABLE TRAY & RACEWAY)

4.1 S/ F GI Cable Trays

Supplying and installing following size of perforated pre-painted GI cable

trays with perforation not more than 17.5%, in convenient sections,

joined with connectors, suspended from the ceiling with GI. suspenders

including bolts & nuts, painting suspenders etc as required.

4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 200.00 604.00 120800.00 DSR 2021

4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 300.00 777.00 233100.00 DSR 2022

4.1.10 450 mm width X 62.5 mm depth X 2.0 mm thickness Metre 150.00 1224.00 183600.00 DSR 2022

4.1.11 600 mm width X 62.5 mm depth X 2.0 mm thickness Metre 100.00 1463.00 146300.00 DSR 2022

4.1.13 900 mm width X 62.5 mm depth X 2.0 mm thickness Metre 50.00 1952.00 97600.00 DSR 2022

4.2 S/ F GI Cable Tray Bends

Supplying and installing following size of perforated pre-painted GI cable

tray bends with perforation not more than 17.5%, in convenient sections,

joined with connectors, suspended from the ceiling with GI suspenders

including bolts & nuts, painting suspenders etc as required.

4.2.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 20.00 1018.00 20360.00 DSR 2022

4.2.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 12.00 1438.00 17256.00 DSR 2022

4.2.10 450 mm width X 62.5 mm depth X 2.0 mm thickness Each 5.00 2479.00 12395.00 DSR 2022

4.2.11 600 mm width X 62.5 mm depth X 2.0 mm thickness Each 2.00 3041.00 6082.00 DSR 2022

4.2.13 900 mm width X 62.5 mm depth X 2.0 mm thickness Each 2.00 6544.00 13088.00 DSR 2022

4.4 S/ F GI Cable Tray Tee's

Supplying and installing following size of perforated pre-painted GI cable

tray tee's with perforation not more than 17.5%, in convenient sections,

joined with connectors, suspended from the ceiling with Gi suspenders

including bolts & nuts, painting suspenders etc as required.

4.4.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 3.00 1356.00 4068.00 DSR 2022

4.4.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 2.00 1979.00 3958.00 DSR 2022

4.4.6 450 mm width X 62.5 mm depth X 2.0 mm thickness Each 2.00 3224.00 6448.00 DSR 2022

4.4.11 600 mm width X 62.5 mm depth X 2.0 mm thickness Each 1.00 4268.00 4268.00 DSR 2022

4.4.13 900 mm width X 62.5 mm depth X 2.0 mm thickness Each 5884.00 0.00 DSR 2022

4.5 S/ F GI Cable Tray Cross Members

Supplying and installing following size of perforated pre-painted GI cable

tray cross members with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with GI

suspenders including bolts & nuts, painting suspenders etc as required.

4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 1186.00 0.00 DSR 2022

4.5.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1718.00 0.00 DSR 2022

4.5.11 600 mm width X 62.5 mm depth X 2.0 mm thickness Each 3654.00 0.00 DSR 2022

4.5.13 900 mm width X 62.5 mm depth X 2.0 mm thickness Each 5017.00 0.00 DSR 2022

Supply & fixing of following size (GP RACEWAY- Fabricated from GP

Sheet) race ways for electrical & LV wiring including neoprene gasket in

joints, cutting the floor & jaming the race way / hanging in ceiling,

supporting arrangement as approved by consultant / architect with all

necssary hard ware (including civil work) as per site requirement. The

thickness of raceway & cover shall be as per technical specification.

MR 75 mm wide x 40 mm deep. Meter 150.00 533.30 79995.15 MR

MR 100 mm wide x 40 mm deep. Meter 350.00 610.65 213727.50 MR

MR 150 mm wide x 40 mm deep. Meter 400.00 746.35 298540.00 MR

MR 300 mm wide x 40 mm deep. Meter 200.00 610.65 122130.00 MR

Supply & fixing of following size of Raceway Junction Box made out of GP

Sheet for electrical & LV wiring including, cutting the floor & jaming the

junction box / hanging in ceiling, supporting arrangement as approved by

consultant / architect with all necssary hard ware (including civil

work).(Junction box to be provided as per drawing/ as per site

requirement & as per specification). The thickness of junction box shall be

a as per thechnical specification.

MR 100 mm wide x 50 mm deep. Nos. 20.00 449.17 8983.34 MR

MR 150 mm wide x 50 mm deep. Nos. 40.00 560.44 22417.64 MR

MR 300mm wide x 50 mm deep Nos. 20.00 1346.14 26922.88 MR

MR 400mm wide x 50 mm deep Nos. 2.00 1424.85 2849.70 MR

I/E 1 Sub Head (MAIN LT PANEL & MAIN DISTRIBUTION PANEL)

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

Code Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of

35 kA symmetrical at 415 volts.

800 amps 4P 35 kA, ACB

Metering & Indication

MFM digital electronic meter with inbuilt selector switch and 800/5 Amps

suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

1000 Amps 4 Pole 35 kA for 1 sec. AL bus bars with heat coloured

shrinkable insulation sleeve. - 1 Set

2 No. 400 amps 4 Pole MCCB 25kA outgoing feeder

2 No. 200 amps 4 Pole MCCB 25kA outgoing feeder

2 No. 125 amps 4 Pole MCCB 25kA outgoing feeder

2 No. 63 amps 4 Pole MCCB 25kA outgoing feeder

10 No. 63 amps 4 Pole MCB 16kA outgoing feeder

MAIN LT PANEL_as described above. Set. 1.00 610650.00 610650.00 MR

2.0 HVAC PANEL

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of

25 kA symmetrical at 415 volts.

400 amps 4P 25 kA, MCCB.

Metering & Indication

VAF digital electronic meter with inbuilt selector switch and 400/5 Amps

suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

600 Amps 4 Pole 25 kA for 1 sec. Alumminium bus bars with heat

coloured shrinkable insulation sleeve. - 1 Set

14No. 63 amps 4 Pole MCCB outgoing feeder

HVAC PANEL_as described above. Set. 1.00 298540.00 298540.00 MR

3.0 LIFT PANEL

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of

25 kA symmetrical at 415 volts.

100 amps 4P 25 kA, MCCB.

Metering & Indication

VAF digital electronic meter with inbuilt selector switch and 100/5 Amps

suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

Code Phase indicating light shall be protected by 6A MCB. - 1 Set

150 Amps 4 Pole 25 kA for 1 sec. Alumminium bus bars with heat

coloured shrinkable insulation sleeve. - 1 Set

2No. 63 amps 4 Pole MCCB outgoing feeder

6No. 63 amps 4 Pole MCB outgoing feeder

LIFT PANEL_as described above. Set. 1.00 169625.00 169625.00 MR

Design, manufacture, supplying fixing in position of the following front

operated cubicle type, front access, dead back, 2mm thick steel enclosed

free standing, dust and vermin proof, switchboard with IP42 protection

with hinged and lockable doors complete with interconnections, tinned

copper crimping lugs, bonding to earth and painting, suitable for use at

415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of

25 kA symmetrical at 415 volts.

200 amps 4P 25 kA, MCCB.

Metering & Indication

VAF digital electronic meter with inbuilt selector switch and 200/5 Amps

suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

200 amps 4P 25 kA, MCCB.

Metering & Indication

VAF digital electronic meter with inbuilt selector switch and 200/5 Amps

suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.

Phase indicating light shall be protected by 6A MCB. - 1 Set

400 Amps 4 Pole 25 kA for 1 sec. Copper bus bars with heat coloured

shrinkable insulation sleeve. - 1 Set

16No. 63 amps 4 Pole MCB outgoing feeder

8No. 40 amps 4 Pole MCB outgoing feeder

UPS PANEL_as described above. Set. 1.00 189980.00 189980.00 MR

TOTAL CARRIED TO SUMMARY 0.00 1268795.00

I/F Sub Head (LT CABLES)

Supply of XLPE insulated and PVC sheathed Aluminium conductor

1 armoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto

date amendments of following sizes:-

1.14 1 core, 25 Sq.mm. Cu. Cable (UPS) Mtr 150.00 752.32 112848.12 MR

Supply, installation, testing & commissioning of following sizes of

600V/1000V Grade Fire Survival / Fire Resistant galvanised steel wire

Armoured cable int the strandard Cu conductor, constructed / designed

2 as per BS 7846. Cable should be suitable to retain the circuit integrity as

per BS 8519 and cirtified for category 3 for F 120 fire test as per BS 8491

Standard on existing cables tray duct / humen pipe etc as required.

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

Code Supply of XLPE insulated and PVC sheathed copper conductor

3 unarmoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto

date amendments of following sizes

3.1 1 core, 120 Sq.mm.(UPS & Server Rack earthing) Mtr 20.00 3971.94 79438.78 MR

3.2 1 core, 16 Sq.mm.(LV System earthing) Mtr 50.00 3250.02 162500.75 MR

Laying of one number additional PVC insulated and PVC sheathed / XLPE

7.2 power cable of 11 KV grade of following size direct in ground including

excavation, sand cushioning, protective covering and refilling the trench

etc as required.

7.2.1 Upto 35 sq. mm Mtr 269.00 DSR-2022

7.2.2 Above 35 sq. mm and upto 95 sq. mm Mtr 286.00 DSR-2022

7.2.3 Above 95 sq. mm and upto 185 sq. mm Mtr 304.00 DSR-2022

7.2.4 Above 185 sq. mm and upto 400 sq. mm Mtr 250.00 356.00 89000.00 DSR-2022

Laying and fixing of following sizes of one number PVC insulated and PVC

5 sheathed/XLPE Power cable of 1.1kv grade on cable tray as required.

5.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr 1800.00 45.00 81000.00 DSR-2022

Above 35 sq. mm and upto 95 sq. mm (clamped with 25/40x3mm MS flat

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS

Above 185 sq. mm and upto 400 sq. mm (clamped with

40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland

9 and aluminium lugs for following size of PVC insulated and PVC sheathed

/ XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass double compression

7 gland and copper lugs for following size of PVC insulated and PVC

sheathed / XLPE copper conductor cable of 1.1 KV grade as required.

7.1 3 core, 10 Sq.mm. Cu. Cable Sets 30.00 632.36 18970.86 MR

7.2 3 core, 6 Sq.mm. Cu. Cable Sets 20.00 675.79 13515.72 MR

7.3 4 core, 10 Sq.mm. Cu. Cable Sets 50.00 746.35 37317.50 MR

7.4 4 core, 16 Sq.mm. Cu. Cable Sets 50.00 811.49 40574.30 MR

7.5 1 core, 50 Sq.mm.(UPS Rack earthing) Sets 8.00 343.32 2746.57 MR

7.6 1 core, 10 Sq.mm.(LV System earthing) Sets 8.00 321.61 2572.87 MR

7.7 1 core, 6 Sq.mm.(LV System earthing) Sets 8.00 317.54 2540.30 MR

Supply & making end termination with brass double compression glands

for the following Fire survival / Fire Resistance armoured 600/1000 V

8 grade Aluminium cable including cost of crimping lugs/ferrules,

compression glands, solder, cable sockets, insulation tape etc complete as

Providing,fixing and laying of following dia hume Pipe NP2 class (light

9 duty) in ground with RCC collars,jointing with cement mortor 1:2

(1cement+2fine sand) including trenching 75cm deep and re-filling as

TOTAL CARRIED TO SUMMARY 295272.00 4149898.69 0

I/H Sub Head (E A R T H I N G)

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- Internal Electrical Estimate

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.NO. Item Description Unit QTY. RATE Remarks

Code Supply, installation, testing and commissioning of the following Earting

pits and strips or approved equivalent:

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

1.0 accessories, and providing masonry enclosure with cover plate having Each 4.00 6855.00 27420.00 DSR-5.2

locking arrangement and watering pipe etc. with charcoal/ coke and salt

Supply Installation, Testing & Commissioning of Advance Maintenance

Free earthing environment friendly Chemical Earthing system consisting of

2.0 1no. of 3 mtr length, 40 mm dia pipe earth electrode made of GI with Nos 8.00 11534.50 92276.00 MR

terminals to connect conductor with 1bag (25Kgs) of environment freindly

back fill compound with DMC Pit Cover. (building panel & lifts)

Supply Installation, Testing & Commissioning of Advance Maintenance

Free earthing environment friendly Chemical Earthing system consisting of

1no. of 3 mtr length, 40 mm dia pipe earth electrode made of steel

3.0 circularrods, molecularly bonded copper on outer surface (minimum Each 6.00 16962.50 101775.00 MR

copper bonding thickness 250microns ) with terminals to connect

conductor with 1bag (25Kgs) of environment freindly back fill compound

with DMC Pit Cover. (LV & UPS)

Providing & fixing of 25mm x 5mm GI strip on surface or recess for earth

connection as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing as required.

Providing and fixing 50 mm X 5 mm copper strip on surface or in recess

for connections etc. as required.

Providing and fixing 50 mm X 5 mm GI strip on surface or in recess for

connections etc. as required.

TOTAL CARRIED TO SUMMARY 267340.00 204038.52

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP

services & Interior Works at Lodhi Road, New Delhi, 110003

SUMMARY COST OF HVAC WORK

S. No. Description of item Schedule Item Non-Schedule

DSR - 2019 Item

Total cost of DSR(2019) Items considering cost index @ 1.1347% &

factor @ 1.0633 for GST @18% & Correction Factor @0.973- HVAC

B. AIR DISTRIBUTION ₹ 2,25,060 ₹ 2,92,076

C. VENTILATION SYSTEM ₹ 74,480 ₹ 2,12,256

D. Air Purification System ₹ 19,20,900

Total of DSR 2022 ₹ 2,99,540

Total cost of DSR Items 2022 (B) (considering factor @ 1.0633 for

GST @ 18% & Correction Factor @0.973)

TOTAL SUMMARY FOR (CPWD + NON SCHEDULE ITEMS) ₹ 1,03,75,146

Digitally signed by ANUJ

Name of Work: Renovation work for NBCC Corporate office including Retro-fitting ,MEP services & Interior Works at Lodhi Road, New Delhi, 110003

SCHEDULE OF QUANTITY :- HVAC

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.No DSR /NSR DESCRIPTION UNIT QTY. DSR Rate DSR Amount MR Rate MR Amount

1.0 A AC EQUIPMENT

Supply Installation,Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating

,having all hermetically sealed inverter type Scroll Compressor (s), minimum two

compressors for above 14HP modules, microprocessor based Controller ,top discharge type

condensing unit(s),with R410A Refrigerant ,vibration isolators,with suitable foundation

etc.complete as required.The unit shall deliver the rated capacity at AHRI Conditions and

work even at 50°C ambient temperature without tripping.The unit shall be suitable to work

on 400V+/-10%,3 Phase,50 HzAC power supply.The unit shall be filled with first charge of the

refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than

3.1 and IEER not less than 6.5 .

1.2 Outdoor Units cooling with heating

DSR-1.1 42 HP (20+12+10) FOR FIRST FLOOR Nos. 1 6,89,430 689430

1.1.6 14 HP FOR SIXTH FLOOR Nos. 1 2,29,810 229810

1.1.7 14 HP FOR SEVENTH FLOOR Nos. 1 2,29,810 229810

1.1.8 14 HP FOR EIGHT FLOOR Nos. 1 2,29,810 229810

1.3 DSR-2 CASSETTE UNIT

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed

motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for

operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall

have automatic force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB

and 19 Degree C WB temperature.

4-WAY CASSETTE UNIT

1.3.1 DSR-2.2 1.0 TR 4-way cassette unit Nos. R.O 29,137

1.3.2 DSR-2.4 1.6 TR 4-way cassette unit Nos. 1 30,204 30204

1.3.3 DSR-2.5 2.4 TR 4-way cassette unit Nos. 11 31,453 345983

1.3.5 DSR-2.8 3.2 TR 4-way cassette unit Nos. 11 32,787 360657

NSR-1 ONE WAY CASSETTE UNIT

NSR-1.1.1 1.0 TR 1- way cassette unit Nos. 29 47984 1391536

NSR-1.1.2 1.6 TR 1- way cassette unit Nos. 13 53521 695773

NSR-1.1.3 2.0 TR 1-way cassette unit Nos. R.O

1.4 DSR-3 HI-WALL UNITS

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity and external

static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable

synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion valve, corded

DSR-4 remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc.,

suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz complete as required.

The unit shall have automatic force shut down provision in case of fire on receiveing signal

from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27

Degree C DB and 19 Degree C WB temperature.

DSR-4.17 5.5 TR Ductable type unit Nos. 2 85,766 171532

DSR-4.19 8.0 TR Ductable type unit Nos. 1 89,590 89590

Supplying, installing, testing and commissioning of Refnet joint (Y-Branches) branch

distributors with Variable refrigerant flow distribution couplings for refrigerant piping in

copper piping. The bidder shall consider the required diameter of the refnet joint as required

for the system to get connected by refrigerant piping of suitable guage for it to function

satisfactorily without leakage through the joints. cost shall also include insulation of 19mm /

13mm thick nitrile rubber closed type tubular form.

Supply,installation, tesing & commistioning of channel iron 75mm x 40 mm x 6 mm (7.14

Kg/Meter) for VRV outdoor Unit as per specification.

Supply Installation, testing, commstioning of Suitable capacity of Digital Centralized

1.7 NSR-3.1 Lot 1 R.O

controller for VRV system for both indoor & outdoor unit as per technical spcification

1.8 DSR-5 REFRIGERENT & DRAIN PIPING

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- HVAC

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.No DSR /NSR DESCRIPTION UNIT QTY. DSR Rate DSR Amount MR Rate MR Amount

Supplying, installing, testing and commissioning ,interconnecting refrigerant copper pipe

work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation

(Class-"O") between each set of indoor & outdoor units as per specifications, all piping

inside the building shall be properly supported with MS hanger. refrigerant pipe insulation

shall be cover with UL certified UV protective coating with 7 mill fiber glass cloth with two

Coat system. Protective Coating shall be UL classified and should conform to UL for surface

burning characteristics.The Protective Coating should conform to ASTM D 5590 standard for

fungal resistance.

1.8.1 DSR-5.1 6.4 mm OD ( insulation 13mm) ( 0.8mm Thickness) RM 130 245 31850

1.8.2 DSR-5.2 9.5 mm OD ( insulation 13mm) ( 0.8mm Thickness) RM 120 331 39720

1.8.3 DSR-5.3 12.7 mm OD ( insulation 13 mm ) ( 0.8mm Thickness) RM 145 466 67570

1.8.4 DSR-5.4 15.9 mm OD ( insulation 13 mm ) ( 0.8mm Thickness) RM 60 588 35280

1.8.5 DSR-5.5 19.1 mm OD ( insulation 19mm) ( 0.8mm Thickness) RM 50 707 35350

1.8.6 DSR-5.6 22.2 mm OD ( insulation 19mm) ( 0.8mm Thickness) RM 60 865 51900

1.8.7 DSR-5.7 25.4 mm OD ( insulation 19 mm ) ( 0.88mm Thick) RM 50 1022 51100

1.8.8 DSR-5.8 28.6 mm OD ( insulation 19 mm ) ( 0.99mm Thickness) RM 60 1,108 66480

1.8.9 DSR-5.9 31.8 mm OD ( insulation 19mm) ( 1.10mm Thickness) RM 20 1170 23400

1.8.10 DSR-5.10 34.9mmdia(OD)( insulation 19mm) ( 1.62mm Thickness) RM 20 1230 24600

1.8.11 DSR-5.11 38.1mmdia(OD)( insulation 19mm) ( 1.62mm Thickness) RM 10 1265 12650

1.8.12 DSR-5.12 41.27mmdia(OD)( insulation 19mm) ( 1.62mm Thickness) RM 10 1309 13090

Supplying, installing, testing and commissioning, rigid PVC piping complete with fittings,

1.9. NSR-4 supports as per specifications and duly insulated with 6 mm thick closed cell nitrile

rubber insulation.

TOTAL CARRIED TO SUMMERY 4530426 2321517

2.0 AIR DISTRIBUTION

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter

dampers, vanes, hangers, supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

2.1.1 DSR-16.12.1.1 Thickness 0.63 MM Galvanized Sheet Steel Ducting Sqm. 185 1080 199800

2.1.2 DSR-16.12.1.2 Thickness 0.80 MM Galvanized Sheet Steel Ducting Sqm. 20 1263 25260

Supply, fabrication, installation and testing the flexible connections constructed of fire

resistance flexible double canvas sleeve as per the approved shop drawings.

Supply, installation and testing of galvanised steel construction Louver dampers within ducts

2.3 NSR -6 to be provided with suitable ducts lever and quadrants for manual control of volume of air Sq.m. 2 6903 13806

flow and for proper balancing of the air distribution system.

Supply, installation, testing and balancing of powder coated /Anodised extruded aluminium

2.4 NSR-7 construction inlet air louvers with bird screen and volume damper for fresh air as per Sq.m. 2 15180 30360

specifications and approved shop drawings.

Supply, installation, testing and balancing of powder coated /Anodised extruded aluminium

2.5 NSR -8 construction louvers with bird screen for exhaust air as per specifications and approved Sq.m. 3 10450 31350

2.6 THERMAL INSULATION

Supplying , installation, testing & commissioning of thermal insulation on ducts Density of

Material shall be between 40 to 60 Kg/m3. Thermal conductivity of elastomeric nitrile rubber

2.7 NSR -9 performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame as

per BS 476 part 7 and also pass Fire Propagation requirement as per BS476 Part 6 to meet

the Class ‘O’ Fire category. water vapour permeability shall be <2.25X10˄-7g/Pa.m.hr as per

std. ASTM E 96.toxicity index shall be less than 3.00 as per NES 713.

NSR -9.1 13 mm thick insulation for supply air duct & Returen Air Duct Sq.m. 180 1,187 213660

TOTAL CARRIED TO SUMMARY 225060 292076

1.0 VENTILATION SYSTEM

NSR -1 INLINE FAN/PROPELLER FAN

Supplying, installing, testing and commissioning of INLINE FANS /PROPELLER FANsuitable for

installing in any position in vertical or horizontal ducts. The casing shall be internally

acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward

curve impeller fitted with maintenance free motor. The motor shall be suitable for 220±5%

/415±10% volt single phase /three phase 50 cycles AC supply & meeting criterion as per

ASHRAE standard 90.1-2010 and high efficiency (IS 12615). Quoted price shall be inclusive of

electronic speed regulator and wiring between fan & speed regulator for single phase fans.

Incase of 3 phase fans quated price shall be inclusive of DOL starter panel (As per motor HP

meeting our parametres) with cabling between starter panel and fan. The incoming power

supply to speed regulator / starter panel shall be provided by electrical contractor. Fan along

with cabinet should be AMCA certified. Noise level should not exceed 57 DB at 3 meter in

room condition. PCC/RCC foundation with plaster, other mounting arrangement,

Antivibration arrangement of cushy foot mountings etc. complete in all respect shall be in

contractor's scope. -

1.2 NSR -1.1 Toilet/Pantry Toilet Exhaust Air

Air Quantity : 220 CFM Nos. 22 9053 199166

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- HVAC

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.No DSR /NSR DESCRIPTION UNIT QTY. DSR Rate DSR Amount MR Rate MR Amount

AIR DISTRIBUTION (FOR AIR CONDITIONING AREAS)

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter

dampers, vanes, hangers, supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

2.1.1 DSR 16.12.1.1 Thickness 0.63 MM Galvanized Sheet Steel Ducting Sqm. 20 1080 21600

2.1.2 DSR 16.12.1.2 Thickness 0.80 MM Galvanized Sheet Steel Ducting Sqm. 20 1263 25260

2.1.3 DSR 16.12.1.3 Thickness 1.0 MM Galvanized Sheet Steel Ducting Sqm. 20 1381 27620

AIR DISTRIBUTION (FOR AIR CONDITIONING AREAS)

Supply, installation, balancing and commissioning fabricated at site GSS sheet metal

2.2 DSR 16.12.2 rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter

dampers, vanes, hangers, supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

2.2.1 DSR 16.12.2.1 Thickness 0.63 MM Galvanized Sheet Steel Ducting Sqm. R.O 1058

2.2.2 DSR 16.12.2.2 Thickness 0.80 MM Galvanized Sheet Steel Ducting Sqm. R.O 1229

2.2.3 DSR 16.12.2.3 Thickness 1.0 MM Galvanized Sheet Steel Ducting Sqm. R.O 1629

Supply, installation, testing and commissioning of GI Volume control duct damper

2.3 NSR-2 (18Gauge)complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, Sqm. 2 6545 13090

as per specifications.

TOTAL CARRIED TO SUMMARY 74480 212256

Air Purification System

Smart comprehensive Air Purification Solution comprising of CAC (Central Air Cleaner) &

(Plasma Ionization)

2.4 CAC (Central Air Cleaner)

AAir purification for ceiling suspended Ductable indoor units and AHU

The air purification system should be suitable to reduce harmful pollutants like particulate

matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens etc. based on below

principle technology viz;Impingement, Polarisation and Agglomeration as a passive air It

should be a slim structured unit specifically designed for integration in Return Air path of

ceiling suspended indoor units, to centrally capture. It should be equivalent to Merv-14 or

Higher efficiency for AHU and Ductable* Units with low pressure drop. It should have 3x

working principles and it should be aluminium based or powder coated steel casing and

should be self-contained. It should be a US patented technology with UL certified

components. The units shall meet ANSI/ASHRAE 52.2 standards and have valid test report to

verify filtration efficiency. The Basic Media of Electric Filter shall Carry Class 2 Fire Rating

Listing by UL.The CAC filter/Electrostatic percipitator (ESP), which have Metal based

collection plate shall not be accepted. The Supplier shall carry UL2998 certification or at least

Acknowledgement letter from UL2998 for testing against Zero Ozone Emission. The system

shall be integrated with the existing pre-section filter area of AHU.

The test report for pressure drop need to be submitted for passive air purification and the

same shall be demonstrated at site.

Electronic filters should consist of an Internet of Things (IoT) based Smart Filtration option

employing a 3-Tier Architecture. This architecture would serve to identify pressure drops

across the filter, indicating when a cleaning & replacement is necessary due to clogged

filters. Contivity : Wi-fi

*Subject to Available Static as per OEM Technical Data Sheet.

2.4.1 NSR-3.1 5.5 TR Ductable type unit Nos. 2 60,950 121900

2.4.2 NSR-3.2 8.0 TR Ductable type unit Nos. 1 74000 74000

2.4.3 NSR -4 Air Purification System (Plasma Ionization)

The Active Air Purification system should consist of Supply, Installation, Testing and

commissioning of Bipolar Ionisation System. The Bipolar Ionisation System shall be of

Needle Point Model (Needle Point should have Nitinol (nickel titanium) Needles) and Carbon

Fibre Brush Model, System should produce positive and negative ions for creating a Bio

Climate rich in ions and hence neutralising harmful pollutants including pathogens, Volatile

Organic Compounds and Particulate Matter within the occupied space.The ionizer shall be

installed at the fan inlet of fan coil units, VRF cassettes, ductless splits , AHU and Ductable

HVAC System. The Unit should accept 12-24 VAC/DC. Product should have UL 867 and UL

2998 certification (for zero ozone emission) , UL 2043 (for Fire and Smoke Safety) , ISO 16000

, CSA C22.2# 187 on atleast any one product .The OEM shall have Efficacy test report on

SARS-CoV-2 OMICRON VARIANT and from any Internationally/Nationally recognised

4-WAY CASSETTE UNIT

2.4.4 NSR -4.1 1.0 TR 4-way cassette unit Nos. R.O - 20,000

2.4.5 NSR -4.2 1.6 TR 4-way cassette unit Nos. 1 0 20,000 20,000

2.4.6 NSR -4.3 2.6 TR 4-way cassette unit Nos. 11 0 20,000 2,20,000

2.4.7 NSR -4.4 3.1 TR 4-way cassette unit Nos. 11 0 20,000 2,20,000

ONE WAY CASSETTE UNIT

2.4.8 NSR -4.5 1.0 TR 1- way cassette unit Nos. 29 0 20,000 5,80,000

2.4.9 NSR -4.6 1.6 TR 1- way cassette unit Nos. 13 0 20,000 2,60,000

2.4.10 NSR -4.7 2.0 TR 1-way cassette unit Nos. R.O - 20,000 0

2.4.12 NSR -4.9 5.5 TR Ductable type unit Nos. 2 0 60,000 1,20,000

2.4.13 NSR -4.10 8.0 TR Ductable type unit Nos. 1 0 70,000 70,000

2.4.14 NSR -4.5 Indoor Air Quality Monitoring System-

Digitally signed by ANUJ

SCHEDULE OF QUANTITY :- HVAC

Note:- The given quantities are based on visual observations at site, the quantities may varies during execution.

S.No DSR /NSR DESCRIPTION UNIT QTY. DSR Rate DSR Amount MR Rate MR Amount

Supply, Installation, Testing & commissioning of IAQ Monitor to remotely measure the levels

of PM 2.5, VOCs, CO2, Temperature, Humidity, HCHO, on a real time basis. The IAQ Monitor

shall be capable of getting connected with Wi-Fi and RS485. The Monitor should be capable

of sending the indoor air quality information on display Screen/Mobile/Workstation as per

Client's requirement. The Monitor should indicate the quality of air through changing the

colours on the display screen as per the NAAQS standards and should meet the WELL