Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC A 13 SURI NAGAR NEAR SLP COLLEGE MORAR GWALIOR 474006 MP | GWALIOR | MADHYA PRADESH | 474006 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹46.9 L+₹6.9 L (17.3%)Rejected-Finance C O PRAMOD KUMAR SHAH BUS STAND NANDPRAYAG NANDPRAYAG CHAMOLI UTTARAKHAND 246429 | NANDPRAYAG | CHAMOLI | UTTARAKHAND | 246429 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹48.5 L+₹8.5 L (21.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
7 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Gwalior
Garrison Engineer Gwalior Morar Cantt
8941/GWL/E8 REPAIR AND STRUCTURAL STRENGTHEN/STABILITY OF CERTAIN BLDGS UNDER AGE B/R-II MORAR CANTT GWALIOR
2024_MES_641494_1
8941/GWL/E8
Open Tender
Civil Works
Works
180 days
Garrison Engineer Gwalior
Please refer tender documents
9 documents required · 9 mandatory
₹500
Garrison Engineer Gwalior
₹96,000
Yes
11 Jun 2024
8 Feb 2024
9 Mar 2024
8 Feb 2024
7 Mar 2024
23 Feb 2024
Amount
Taking down chowkhat or frame (without taking off shutter from the frame) of size n.exc 1.5 Sqm each, removing from the site Cutting holes of size exc 150 Sqcm but n.exc 400 Sqcm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l (using 20mm graded stone aggregate) as required complete all as specified and directed.
Taking down chowkhat or frame (without taking off shutter from the frame) of size exc 1.5 sqm and n.exc 4.00 sqm each, removing from the site cutting holes of size exc 150 Sqcm but n.exc 400 Sqcm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l (using 20mm graded stone aggregate) as required complete all as specified and directed.
M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash bar, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed. Note : Panel filling i.e. glass, fibre sheet, board, wire mesh etc shall be measured and paid for separately.
M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size, 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc complete all as specified and directed. Note : Panel filling i.e. glass, fibre sheet, board etc shall be measure and paid for separately.
S&F for 4 mm thick ACP board both side lamination fixed with screws complete all as specified and directed.
S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting to frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F in renewal for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in renewal of double action floor spring hydraulically regulated made up of minimum size 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty acomplete all as specified and directed.
S&F for galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed.
S&F for framed work such as grills gratings, etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290, E-165, complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint as one coat including Preparation of new Steel surface over 10 cm width or girth complete all as specified and directed.
Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.
S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws, solvent cement/adehesive complete all as specified and directed.
S&F for 12 mm thick PVC Celuka ply of both side plain white colour fixed with screws, solvent cement /adehesive complete all as specified and directed.
S&F for Aluminium anodised barrel tower bolt of size 150mm of extruded section complete all as specified and directed.
S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified and directed.
S&F for Magnate catcher of metal body and striking plate heavy duty including fixed with screw complete all as specified and directed.
S&F for continuous (piano) hinges, mild steel, bright finish or electrogalvenised of n.exc 25 mm flaps size complete all as specified and directed.
S&F for Aluminium alloy anodised sliding door bolt of 250mm size with haps, staple (bolt type) & fixing clips of sheet etc complete all as specified and directed.
S&F for Aluminum butt hinges of 100mm size type C-22 complete all as specified and directed.
S&F for extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and directed.
Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving n.exc 15 cm thick (below or above GL) complete all as specified and directed.
Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item
Excavation over area as in soft / loose soil n.exc 1.5 m deep and getting out complete all as specified and directed.
Dismantiling of stone slabs and tiles (Kota stone etc) of any discription or any thickness in floors, aprons, skirting, dado, PCC tiles at roof etc laid bedded and pointed in any mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and diected.
M&L for 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors, finish rough to receive the floor finishes etc complete all as specified and directed.
M&L for Granite slab of size 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed in CM (1:3) matching the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms including rounding off the exposed edges and polishing complete all as specified and directed.
M&L for digital glazed ceramic tiles, coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces i.e. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
M&L for non skid ceramic coloured tiles of size 300mmx300mmx 6 mm to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M&L for vitrified, coloured and printed tiles of 8mm to 10 mm thick (Square/Rectangular) polished area of each tiles n.exc 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for vitrified, coloured and printed tiles of width as directed and 8mm to 9 mm thick as in skirting fixed over and including 10 mm thick cement back coat in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for vitrified paver colour tiles of size 40cmx40cmx9mm to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on brick/concrete/stone surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "
M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and directed.
M&L for preparation of newly plastered sufaces of walls & applying 2 coats of cement base paint complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of putty on plastered surfaces on wall including preparation of surfaces etc complete all as specified and directed.
Complete removal of existing treatment on wall (any number of layers) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment complete all as specified and directed.
M&L for two coats of distemper oil emlusion white or tinted over a one coat of putty on walls complete all as specified and directed.
M&L for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed.
M&L for applying Two coats of white wash on wall surface complete all as specified and directed.
M&L for complete removal of existing treatment (internal and external) on walls by scrapping with steel wire brushing, scraping down smoke soot/ plants roof from wall/chhajjas complete all as specified and directed.
M&L for applying two coats of cement based paint on walls/chajjas including preparation of old plastered or un plastered surface comlete all as speified and directed.
Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth as in foundation etc as in soft/loose soil complete all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5Km above the starting point with soil complete all as specified and directed.
M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) (except bricks only) complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.
S&F for 20 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.
S&F for 25mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.
S&F in renewal 110mm dia PVC(SWR) type 'B' pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S&F in renewal 75mm dia PVC(SWR) type 'B' pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and directed.
S&F for 110mm dia PVC(SWR) pipes bends any radious with access door complete all as specified and directed.
S&F for 75 mm dia PVC(SWR) pipes bends any radius with access door complete all as specified and directed.
S&F for 110mm dia PVC(SWR )pipes junction (T/Y) equal or unequal any radious with access door complete all as specified and directed.
S&F for 110mm dia PVC(SWR) vent cowl complete all as specified and directed.
M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating incl jointing with solvent cement as in renewal complete all as specified and directed.
S&F in renewal 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads, screwed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe fixed complete all as specified and directed.
S&F in renewal 15mm, bib tap Fancy type long body chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, screwed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, screwed for iron pipe complete all as specified and directed.
S&F for in renewal 15mm, pillar taps fancy type long body chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, screwed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.
S&F of vitreous china wash basin, white, oval type of size 550 x 400mm Including waste coupling, waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.
S&F for in renewal Heatth Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.
S&F in renewal Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed.
S&F in renewal sinks with drainage board made out of stainless steel 0.90 mm thick kitchen or laboratory with plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or with and including cantilever brackets made out of angle iron of size 25mx25mx5m with two coats of synthetic enamel paint over a coat of red oxide primer fixed in walls and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in renewal for plate rack made out of stainless steel of wire type/sheet pattern size and type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.
S&F in renewal viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.
S&F in renewal plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.
M&L in renewal for vitreous china squatting pan, orissa pattern of size 580mmx440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed.
S&F in renewal PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle including bracket made out of angle iron of size 25mx25mx5m with two coats of synthetic enamel paint over a coat of red oxide primer fixed in wall complete of capacity 10 litres, complete all as specified and directed.
S&F in renewal vitreous china urinals, Half stall type, white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.
Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.
S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.
S&F for Soap dish of CP fixed with PVC rawal plugs and screw complete all as specified and directed.
S&F in renewal CP tubular towel rail 'D' type 20mm dia and 60cm long complete all as specified and directed.
S&F for Peg set of six S.S. hookes fixed to wall with PVC plugs and screw complete all as specified and directed.
S&F in renewal Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified and directed.
Dismantling water tanks of any description and in any position, of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.
S&F for Rotational moulded poly-ethylene Three layered antibactrial film tanks (cylinderical vertical) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.
S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F in renewal gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.
Surface excavation n.exc 30 cm deep and avg 15 cm deep and getting out in any type of soil complete all as specified and directed.
M&L for PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete, complete all as specified and directed.
M&L for machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks/tiles, 60mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment, laid over sand cusion fixed as in floors/ paths/ pavings etc complete all as specified and directed. Note : Sand Cusion shall be measured and paid in separate item
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed .
M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone agrregate) as in lintels upto 1.5m clear span, cills, steps, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.
M&L for Prepartion of New/Old plastered surfaces of walls, chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade) complete all as specified and directed.
M&L for preparation of surface for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n.exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and directed.
Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.
S&F for false ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (size 600mm x 600 mm/ 595 mm x595 mm) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of (Main Tee of size 32mmx24mmx0.55mm cross tee of size 24mmx24mmx0.38mm) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and directed.
S&F for renewal seamless ceiling with using 12mm thick factory made gysum fibre board fixed with screw, including GI frame work for seamless ceiling comrises of GI erimeter channel 0.55mm thick with two unequal flanges of 20mm and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm with lis of 10.5 mm and fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre suitable for suspended system with and including two coats of oil bound distemper over one coat of putty to give even and smooth finish without showing any joints complete all as specified and directed.
Dismantling of AC (corrugated/semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and directed.
S&F for Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/sqm corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F for Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 MPA as in Roof covering/cladding (ridge) to wall fixed with self tapping screws complete all as specified and directed.
M&L for Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting, etc, and similar work conforming to Fe 290 Gde E-165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
S&F for rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E-165) complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.
M&L for two coats of synthetic enamel paint over coat of Red oxide primer over Old steel surfaces n.exc 10 cm width or girth complete all as specified and directed.
S&F for framed brackets of angles or tees with web and flanges cut to shape, drilled and counter shunk for screw, including bending and welding angle necessary gusset plate riveting etc n.exc 10 kg each brackets confirming to Fe-290 Gde E-165 complete all as specified and directed.
Cutting of cracks to V section in existing wall surface, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc complete all as specified and directed.
M&L for reinforced cement concrete nominal mix (1:2:4) type B1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams, columns in floor, roof, landing complete all as specified and directed.
M&L for reinforced cement concrete nominal mix (1:2:4) type B1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, base for coloumns and mass concrete etc complete all as specified and directed.
M&L for reinforced cement concrete nominal mix (1:2:4) type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers bressummer, lintel over 1.5 m span etc complete all as specified and directed.
M&L for use and waste formwork to sides of concrete foundation, footing, base of coulmn, raft, raft beam sides and soffits of foundation and plinth beam for rough finished surfaces of concrete complete all as specified and directed.
M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed.
M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works, not exceeding 200 mm thick (horizontal or sloping) including slab edges for rough finished surfaces of concrete complete all as specified and directed.
S&F for mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking, bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.
S&F for TMT bars 6mm to 8 mm dia cut to length bent to shape required including cracking, bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channel plates etc, including welding grinding, buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.
Taking down ceiling fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed.
Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.
Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed.
Taking down unserviceable TPN DB with MCB's of any make/capacity complete all as specified and directed.
M&L for concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches sockets etc complete all as specified and directed for the following:-
One light point controlled by one switch.
One Ceiling fan point controlled by one switch.
One Exhaust fan point controlled by one switch.
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.
Description all as per item No 127 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed.
S&F of switch piano, flush button single pole one way 5 Amp complete all as specified and directed.
S&F of socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.
S&F of switch piano, flush button single pole one way 15 Amp complete all as specified and directed.
S&F of socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.
S&F of ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
S&F of electronic step rotary type fan regulator of two module capacity 30 to 50 Watt, 240 volts, AC 50Hz complete all as specified and directed.
S&F of lamp holder with metal ring, PVC /Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed.
S&F of Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, Efficiency >130 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed.
M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade confirming to IS 14930 (Part-I) 2001, (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
S&F of sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp, 4 pole & Including MCCB 100 amps 4 pole 16 KA complete (when MCB's are to be used) with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down complete all as specified and directed.
S&F of MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F of MCB SPN 40 Amps, 240 volts 'C' series 16 KA, including connection with suitable size copper lugs complete all as specified and directed.
S&F for MCB SP 240 volts, 6 to 32 Amps 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40mmx 40mmx 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.
M/S SANJAY AGARWAL
M/s Subhash Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .